Sulfate-Mediated End-to-End Assembly of Gold Nanorods

BODIPY directed one-dimensional self-assembly of gold nanorods

The assembly of anisotropic nanomaterials into ordered structures is challenging. Nevertheless, such self-assembled systems are known to have novel physicochemical properties and the presence of a chromophore within the nanoparticle ensemble can enhance the optical properties through plasmon-molecule electronic coupling. Here, we report the end-to-end assembly of gold nanorods into micrometer-long chains using a linear diamino BODIPY derivative. The preferential binding affinity of the amino group and the steric bulkiness of BODIPY directed the longitudinal assembly of gold nanorods. As a result of the linear assembly, the BODIPY chromophores positioned themselves in the plasmonic hotspots, which resulted in efficient plasmon-molecule coupling, thereby imparting photothermal properties to the assembled nanorods. This work thus demonstrates a new approach for the linear assembly of gold nanorods resulting in a plasmon-molecule coupled system, and the synergy between self-assembly and electronic coupling resulted in an efficient system having potential biomedical applications.

Nanoparticle Size Influences the Self-Assembly of Gold Nanorods Using Flexible Streptavidin-Biotin Linkages

The self-assembly of colloidal nanocrystals remains of robust interest due to its potential in creating hierarchical nanomaterials that have advanced function. For gold nanocrystals, junctions between nanoparticles yield large enhancements in local electric fields under resonant illumination, which is suitable for surface-enhanced spectroscopies for molecular sensors. Gold nanorods can provide such plasmonic fields at near-infrared wavelengths of light for longitudinal excitation. Through the use of careful concentration and stoichiometric control, a method is reported herein for selective biotinylation of the ends of gold nanorods for simple, consistent, and high-yielding self-assembly upon addition of the biotin-binding protein streptavidin. This method was applied to four different sized nanorods of similar aspect ratio and analyzed through UV-vis spectroscopy for qualitative confirmation of self-assembly and transmission electron microscopy to determine the degree of self-assembly in end-linked nanorods. The yield of end-linked assemblies approaches 90% for the largest nanorods and approaches 0% for the smallest nanorods. The number of nanorods linked in one chain also increases with an increased nanoparticle size. The results support the notion that the lower ligand density at the ends of the larger nanorods yields preferential substitution reactions at those ends and hence preferential end-to-end assembly, while the smallest nanorods have a relatively uniform ligand density across their surfaces, leading to spatially random substitution reactions.

Fluorogenic response from DNA templated micrometer range self-assembled gold nanorod

Plasmonic gold nanorod (AuNR) on a macromolecular matrix exhibits an end-to-end (ETE) long-range self-assembly (AuNR)n with n > 100. In the case of small molecules as a template, the pre-synthesized macromolecular matrix is missing and this brings a synthetic challenge in directed long-range assembly of AuNR. Self-assembly with thiol-modified small DNA and AuNR shows a much short-range ETE assembly with n < 25 via a simple evaporation technique on a solid surface. In this study, the introduction of two short amine modified probe DNAs (∼2.5 nm) and one 22-mer complementary single strand (ss)-DNA template (∼7 nm) show the long-range ETE self-assembly of (AuNR)n with n > 130. In the solution state, the zigzag arrangement within the assembled structure controls the typical change in the absorption behavior for (AuNR)n ETE assembly. The formation of this long-range ETE self-assembly in a solution state was verified from the combined effect of fluorescence resonance energy transfer (FRET) and hotspot-induced fluorescence enhancement. The probe DNAs and templated DNA concentration on fluorescence enhancement have been varied to monitor the effect of (AuNR)n with n = ∼5-130 in ETE self-assembly. Primarily quenched FRET acceptor in the presence of AuNR decisively exhibits remarkable fluorogenic response in ETE self-assembly with maximum n value. Although the FRET efficiencies among the fluorophores are comparable, the fluorogenic boost in ETE AuNR is due to the increased number of intrinsic navigated hotspots in these assemblies.

Coiled-coil peptide-based assembly of a plasmonic core-satellite polymer-metal nanocomposite as an efficient photothermal agent for drug delivery applications

Polymer-metal nanocomposites have widespread applications in biomedical fields such as imaging, catalysis, and drug delivery. These particles are characterized by combined organic and inorganic properties. Specifically, photothermal nanocomposites incorporating polymeric and plasmonic nanoparticles (NPs) have been designed for both triggered drug release and as imaging agents. However, the usual design of nanocomposites confers characteristic issues, among which are the decrease of optical properties and resulting low photothermal efficiency, as well as interactions with loaded drugs. Herein, we report the design of a core-satellite polymer-metal nanocomposite assembled by coiled-coil peptides and its superior photothermal efficiency compared to electrostatic-driven nanocomposites which is the standard design. We also found that the orientation of gold nanorods on the surface of polymeric NPs is of importance in the final photothermal efficiency and could be exploited for various applications. Our findings provide an alternative to current wrapping and electrostatic assembly of nanocomposites with the help of coiled-coil peptides and an improvement of the control over core-satellite assemblies with plasmonic NPs. It paves the way to highly versatile assemblies due to the nature of coiled-coil peptides to be easily modified and sensitive to pH or temperature.

Self-assembly of anisotropy gold nanocubes into large area two-dimensional monolayer superlattices

The spontaneous self-assembly of metal nanocrystals into two-dimensional (2D) monolayer superlattices with highly ordered symmetry and configuration paves the way towards the fabrication of functional materials. However, there remains great challenge for anisotropic nanocrystals to self-assembly into high quality superlattice because of the orientation and configuration consistency. Here, a facile yet universal solvent annealing driven 2D interfacial assembly of synthetic dried metal nanocrystals is firstly developed to realize the construction of the non-close-packing 2D monolayer gold nanocube (AuNC) superlattice with tunable interparticle distance and internal configurations (i.e. face-to-face and hexagonally-packed arrangement), which is achieved by precisely controlling molecular weight of polymer ligands tethered on AuNCs and the van der Waals forces between the adjacent AuNCs. In addition, the scale of the generated 2D monolayer AuNC superlattice with highly ordered internal arrangement and orientation can reach up to hundreds of micrometers, thus acquiring significant surface-enhanced Raman scattering performance of the large scale superlattice due to the strong plasma coupling effect. This strategy not only provides a robust route to fabricate nanocrystal superlattice structures but also offers a promising platform for preparing diverse functional materials with potential applications in electronics, photonics, detections, and others.

Controlled synthesis of gold nanorod dimers with end-to-end configurations

End-to-end gold nanorod dimers provide unique plasmonic hotspots with extremely large near-field enhancements in the gaps. Thereby they are beneficial in a wide range of applications, such as enhancing the emissions from ultra-weak emitters. For practical purposes, synthesis of gold nanorod dimers with high yield, especially on the substrates, is essential. Here, we demonstrate two controllable strategies to synthesize gold nanorod dimers based on the self-assembly of gold nanorods, either in bulk solution or on the surface of a glass substrate directly. Both methods can give a high yield of gold nanorod dimers, yet, assembling them directly on the substrate provides more flexibility in controlling the shape and size of each nanorod within the dimer. We also show that these gold nanorod dimers can be used to enhance two-photon-excited fluorescence signals at the single-molecule level.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

Understanding blue shift of the longitudinal surface plasmon resonance during growth of gold nanorods

We have investigated in detail the growth dynamics of gold nanorods with various aspect ratios in different surrounding environments. Surprisingly, a blue shift in the temporal evolution of colloidal gold nanorods in aqueous medium has been observed during the growth of nanorods by UV–visible absorption spectroscopy. The longitudinal surface plasmon resonance peak evolves as soon as the nanorods start to grow from spheres, and the system undergoes a blue shift in the absorption spectra. Although a red-shift is expected as a natural phenomenon during the growth process of all nano-systems, our blue shift observation is regarded as a consequence of competition between the parameters of growth solution and actual growth of nanorods. The growth of nanorods contributes to the red-shift which is hidden under the dominating contribution of the growth solution responsible for the observed massive blue shift.

Synthesis of Solution-Stable End-to-End Linked Gold Nanorod Dimers via pH-Dependent Surface Reconfiguration

End-to-end dimers of gold nanorods are predicted to be excellent substrates for surface-enhanced spectroscopy. However, the synthesis of solution-stable end-to-end dimers remains challenging. We exploit the pH-dependent configurational change of polyelectrolytes to initiate and terminate the gold nanorod assembly formation to produce end-to-end linked dimers in high yield. The gold nanorods are first overcoated with a polyelectrolyte, and the end-to-end attachment is initiated by adding a thiol linker in acidic medium. The assembly formation is then terminated at the dimer stage by changing the pH of the medium by the addition of an appropriate amount of 1,4-diazabicyclo[2.2.2]octane (DABCO).The nanorod dimers synthesized here are stable in solution for a week without any additional surface encapsulation.

In situ modulation of gold nanorod's surface charge drives the growth of end-to-end assemblies from dimers to large networks that enhance single-molecule fluorescence by 10 000-fold

End-to-end assemblies of anisotropic plasmonic nanostructures with small nanogaps are of great interest as they create strong hot spots for enhancing weak fluorescence and/or scattering of molecules. Here we report the growth of dithiol-linked end-to-end assemblies of gold nanorods from dimers to large networks containing thousands of individual nanorods, directed by in situ tuning of nanorod's surface charge. Surface charge was lowered to initiate the aggregation process but was subsequently increased to achieve slow tip-specific growth over seven days to form end-to-end networks of nanorods, which were stable in solution for over one month. Furthermore, we showed that these assemblies contained strong plasmonic hot spots which enhanced the fluorescence signal of a weak emitter by 10⁴-fold. This enhancement is approximately 10-fold larger than that obtained using a single gold nanorod and is comparable to the largest enhancement obtained using more expensive lithographically made in-plane antenna arrays.

Gold Nanorods as an Efficient Substrate for the Detection and Degradation of Pesticides

The rapid, ultralow detection, degradation, and complete removal of pesticides demand the design of potential substrates. Herein, we discussed gold nanorods (Au NRs) as the potential substrate for the naked eye detection and degradation of two common and broad-spectrum pesticides, chlorpyrifos (CPF) and malathion (MLT), up to 0.15 ppt concentration within 2 min. Under certain environmental conditions, both the pesticides degraded and adsorbed on the surface of Au NRs. The degraded moieties of CPF and MLT on the surface of Au NRs formed side-to-side and end-to-end interactions, respectively, leading to a long-range assembly. This shows that no external agent is required, and only CPF and MLT analytes are quite enough for the formation of assembly of Au NRs. Assembly of Au NRs is confirmed by transmission electron microscopy (TEM) analysis, and degradation is supported by Fourier transform infrared (FTIR) spectroscopy, Raman spectroscopy, and gas chromatography-mass spectrometry (GC-MS) analyses. Au NRs were recovered and reused for four consecutive cycles. The fast and ultralow detection of pesticides demonstrates that Au NRs are a potential substrate for the detection and degradation of pesticides.

Plasmonic Oligomers with Tunable Conductive Nanojunctions

Engineering plasmonic hot spots is essential for applications of plasmonic nanoparticles. A particularly appealing route is to weld plasmonic nanoparticles together to form more complex structures sustaining plasmons with symmetries targeted to given applications. However, control of the welding and subsequent hot spot characteristics is still challenging. Herein, we demonstrate an original method that connects gold particles to their neighbors by another metal of choice. We first assemble gold bipyramids in a tip-to-tip configuration, yielding short chains of variable length, and grow metallic junctions in a second step. We follow the chain formation and the deposition of the second metal (i.e., silver or palladium) via UV/vis spectroscopy, and we map the plasmonic properties using electron energy loss spectroscopy. The formation of silver bridges leads to a huge red shift of the longitudinal plasmon modes into the mid-infrared region, while the addition of palladium results in a red shift accompanied by significant plasmon damping.

Highly Stable Silica-Coated Gold Nanoflowers Supported on Alumina

Shape-controlled nanocrystals, such as nanowires and nanoflowers, are attractive because of their potential novel optical and catalytic properties. However, the dispersion and morphological stabilities of shape-controlled nanocrystals are easily destroyed by changing the dispersion solvent and temperature. Methods of support and the silica coating are known to improve the dispersion and morphological stabilities of metal nanocrystals. The silica-coating method often causes morphological changes in shape-controlled nanocrystals because the silica coating is formed in mixed solutions of water and organic solvents such as ethanol, and this results in aggregation due to changes in the dispersion solvent. Furthermore, ligand exchange, designed to improve the dispersion stability in the solvent, often causes morphological changes. This article introduces a method for the preparation of highly stable silica-coated Au nanoflowers (AuNFs) supported on Al₂O₃. The method of support prevents the aggregation and precipitation of AuNFs when the solvent is changed from water to water/ethanol. Through stability improvement, silica coating of AuNFs/Al₂O₃ was conducted in water/ethanol without ligand exchange that causes morphological changes. Furthermore, silica-coated AuNFs/Al₂O₃ exhibit high morphological stability under high-temperature conditions compared to uncoated AuNFs/Al₂O₃. These results are very useful when preparing highly morphologically stable, silica-coated, shape-controlled nanocrystals without ligand exchange.