Functional Silver-Coated Colloidosomes as Targeted Carriers for Small Molecules

Three-Fluid Nozzle Spray Drying Strategy for Efficient Fabrication of Functional Colloidosomes

Colloidosomes as Pickering emulsion microcapsules are expected to serve various applications, including encapsulation of drugs and loading of functional materials. Normally, when using colloidosomes for drug encapsulation, the latex particles as shell materials need to be mixed with drugs before the assembly process. However, this procedure may cause aggregation of latex particles, thereby resulting in disordered assembled shells or a low loading efficiency. Herein, we propose a three-fluid nozzle spray drying process to efficiently assemble latex particles of P(styrene (St)-co-butyl acrylate (BA)) into colloidosomes. The three-fluid nozzle spray drying equipment allows for the preparation for drug encapsulation without advance mixing of drug and shell materials. This strategy enables the construction of colloidosomes with uniform and controllable pores and the loading of functional materials. The effects of the compressed air flow rate, inlet temperature, feed rate, and solid content were explored, revealing the formation mechanism of colloidosomes during the spray drying process. Doxycycline hydrochloride (DH) was encapsulated in colloidosomes for controllable release, and the sustained release time is up to 100 h. The release rate can be adjusted by varying the glass transition temperature (T_g) and size of latex particles. Furthermore, Fe₃O₄ nanoparticle (NP)-loaded colloidosomes were constructed by this strategy. The magnetic response intensity of colloidosomes can be modulated by varying the amount of Fe₃O₄ NPs. The anticancer drug encapsulation and loading of other functional particles were also explored to expand applications.

Incorporation of nanogels within calcite single crystals for the storage, protection and controlled release of active compounds

Nanocarriers have tremendous potential for the encapsulation, storage and delivery of active compounds. However, current formulations often employ open structures that achieve efficient loading of active agents, but that suffer undesired leakage and instability of the payloads over time. Here, a straightforward strategy that overcomes these issues is presented, in which protein nanogels are encapsulated within single crystals of calcite (CaCO3). Demonstrating our approach with bovine serum albumin (BSA) nanogels loaded with (bio)active compounds, including doxorubicin (a chemotherapeutic drug) and lysozyme (an antibacterial enzyme), we show that these nanogels can be occluded within calcite host crystals at levels of up to 45 vol%. Encapsulated within the dense mineral, the active compounds are stable against harsh conditions such as high temperature and pH, and controlled release can be triggered by a simple reduction of the pH. Comparisons with analogous systems - amorphous calcium carbonate, mesoporous vaterite (CaCO3) polycrystals, and calcite crystals containing polymer vesicles - demonstrate the superior encapsulation performance of the nanogel/calcite system. This opens the door to encapsulating a broad range of existing nanocarrier systems within single crystal hosts for the efficient storage, transport and controlled release of various active guest species.

Dry Two-Step Self-Assembly of Stable Supported Lipid Bilayers on Silicon Substrates

Artificial membranes are models for biological systems and are important for applications. We introduce a dry two-step self-assembly method consisting of the high-vacuum evaporation of phospholipid molecules over silicon, followed by a subsequent annealing step in air. We evaporate dipalmitoylphosphatidylcholine (DPPC) molecules over bare silicon without the use of polymer cushions or solvents. High-resolution ellipsometry and AFM temperature-dependent measurements are performed in air to detect the characteristic phase transitions of DPPC bilayers. Complementary AFM force-spectroscopy breakthrough events are induced to detect single- and multi-bilayer formation. These combined experimental methods confirm the formation of stable non-hydrated supported lipid bilayers with phase transitions gel to ripple at 311.5 ± 0.9 K, ripple to liquid crystalline at 323.8 ± 2.5 K and liquid crystalline to fluid disordered at 330.4 ± 0.9 K, consistent with such structures reported in wet environments. We find that the AFM tip induces a restructuring or intercalation of the bilayer that is strongly related to the applied tip-force. These dry supported lipid bilayers show long-term stability. These findings are relevant for the development of functional biointerfaces, specifically for fabrication of biosensors and membrane protein platforms. The observed stability is relevant in the context of lifetimes of systems protected by bilayers in dry environments.

Peroxidase-like Au@Pt nanozyme as an integrated nanosensor for Ag+ detection by LSPR spectroscopy

Here we report the peroxidase-like Au@Pt nanozyme as an integrated nanosensor for selective detection of silver ions (Ag⁺), where the nanozyme plays the roles as both the signal trigger and reporter simultaneously. This method relies on two critical chemical reactions, including (1) the unique inhibitory effect of Ag⁺ on the nanozyme triggered H₂O₂ decomposition at weak acid environment and (2) H₂O₂ induced Ag⁺ reduction onto the nanozyme surface at basic environment, leading to a blueshift in the localized surface plasmonic resonance wavelength (LSPR λ_max) of the nanosensor. With this simple strategy, we demonstrated the sensitive and selective detection of Ag⁺ over a dynamic range from 0.5 to 1000 μM with a limit of detection (LOD) of 500 nM by UV-visible spectroscopy, which is below the permitted level of Ag⁺ in drinking water by U.S. Environmental Protection Agency (EPA). This method also exhibits satisfying recovery efficiency for Ag⁺ detection both in tap water and spring water from the Yuelu Mountain. With this satisfying sensing performance and excellent stability of nanoprobes, this strategy is promising for the detection of Ag⁺ in environment monitoring and food safety analysis.

The Horizon of the Emulsion Particulate Strategy: Engineering Hollow Particles for Biomedical Applications

With their hierarchical structures and the substantial surface areas, hollow particles have gained immense research interest in biomedical applications. For scalable fabrications, emulsion-based approaches have emerged as facile and versatile strategies. Here, the recent achievements in this field are unfolded via an "emulsion particulate strategy," which addresses the inherent relationship between the process control and the bioactive structures. As such, the interior architectures are manipulated by harnessing the intermediate state during the emulsion revolution (intrinsic strategy), whereas the external structures are dictated by tailoring the building blocks and solidification procedures of the Pickering emulsion (extrinsic strategy). Through integration of the intrinsic and extrinsic emulsion particulate strategy, multifunctional hollow particles demonstrate marked momentum for label-free multiplex detections, stimuli-responsive therapies, and stem cell therapies.

Metal Coated Colloidosomes as Carriers for an Antibiotic

Colloidosomes are polymer shell microcapsules. They are stable and easy to prepare and have been used to encapsulate drugs for release at specific areas in the body. Traditional polymer shell capsules cannot totally seal drugs, since they are porous, and small molecules diffuse through the polymer shell. In this paper, we report a method for encapsulating an antibiotic kanamycin using gold or silver coated colloidosomes. The colloidosomes are impermeable and can be triggered using ultrasound. To investigate the application of the capsules in a biological system, Escherichia Coli (E. coli) was chosen as a model organism. After triggering, the released antibiotic, as well as the metal shell fragments, kill E. coli. Both the silver and gold shells colloidosomes are toxic to this bacterial system and the gold coated colloidosomes can load a higher concentration of kanamycin.

A fabrication method of gold coated colloidosomes and their application as targeted drug carriers

Colloidosomes have attracted considerable attention in recent years because of their potential applications in a range of industries, such as food, bioreactors and medicine. However, traditional polymer shell colloidosomes leak low molecular weight encapsulated materials due to their intrinsic shell permeability. Here, we report aqueous core colloidosomes coated with a gold shell, which make the capsules impermeable. The shells can be ruptured using ultrasound. The gold coated colloidosomes are prepared by making an aqueous core capsule with a polymer shell and then adding HAuCl4, surfactant and l-ascorbic acid to form a second shell. We propose to use the capsules as drug carriers. The gold coated colloidosomes demonstrate a low cytotoxicity and after triggering, both encapsulated doxorubicin and broken gold fragments kill cancer cells. In addition, we set up a targeting model by modifying the gold shell colloidosomes using 4,4'-dithiodibutyric acid and crosslinking them with proteins-rabbit immunoglobulin G (IgG). Label-free surface plasmon resonance was used to test the specific targeting of the functional gold shells with rabbit antigen. The results demonstrate that a new type of functional gold coated colloidosome with non-permeability, ultrasound sensitivity and immunoassay targeting could be applied to many medical applications.

Interfacially active polydopamine for nanoparticle stabilized nanocapsules in a one-pot assembly strategy toward efficient drug delivery

Polydopamine (PDA) nanoparticle stabilized nanocapsules possess great potential for drug delivery via the non-endocytotic pathway.

Pickering Emulsions Stabilized by pH-Responsive Microgels and Their Scalable Transformation to Robust Submicrometer Colloidoisomes with Selective Permeability

Colloidosomes are micrometer-sized hollow particles that have shells consisting of coagulated or fused colloid particles. While many large colloidosomes with sizes well above 1.0 μm have been prepared, there are fewer examples of submicrometer colloidosomes. Here, we establish a simple emulsion templating-based method for the preparation of robust submicrometer pH-responsive microgel colloidosomes. The colloidosomes are constructed from microgel particles based on ethyl acrylate and methacrylic acid with peripheral vinyl groups. The pH-responsive microgels acted as both a Pickering emulsion stabilizer and macro-cross-linker. The emulsion formation studies showed that the minimum droplet diameter was reached when the microgel particles were partially swollen. Microgel colloidosomes were prepared by covalently interlinking the microgels adsorbed at the oil-water interface using thermal free-radical coupling. The colloidosomes were prepared using a standard high-shear mixer with two different rotor sizes that corresponded to high shear (HS) and very high shear (VHS) mixing conditions. The latter enabled the construction of submicrometer pH-responsive microgel-colloidosomes on the gram scale. The colloidosomes swelled strongly when the pH increased to above 6.0. The colloidosomes were robust and showed no evidence of colloidosome breakup at high pH. The effect of solute size on shell permeation was studied using a range of FITC-dextran polymers, and size-selective permeation occurred. The average pore size of the VHS microgel-colloidosomes was estimated to be between 6.6 and 9.0 nm at pH 6.2. The microgel-colloidosome properties suggest that they have the potential for future applications in cosmetics, photonics, and delivery.