Tuning Band Structure of Cadmium Chalcogenide Nanoflake Arrays via Alloying for Efficient Photoelectrochemical Hydrogen Evolution

A Universal Synthesis Strategy for Lanthanide Sulfide Nanocrystals with Efficient Photocatalytic Hydrogen Production

As an important lanthanide (Ln)-based functional materials, the Ln chalcogenides possess unique properties and various applications. However, the controllable synthesis of Ln chalcogenide nanocrystals still faces great challenges because of the rather poor affinity between Ln and chalcogenide ions (S, Se, Te) as well as strong preference of combination with existed oxygen. Herein, a facile but general heterogeneous nucleation synthetic strategy is established toward a series of colloidal ternary Cu Ln sulfides nanocrystals using the Ln dithiocarbamates and CuI as precursors. To extend this synthetic protocol, similar strategy is used to prepare six kinds of high quality CuLnS2 nanocrystals, while the bulk ones are only obtained by the traditional solid-state reaction at rigorous condition. Importantly, high-entropy nanocrystals CuLnS2 and CuEux Ln2-x S3 which contain six Ln elements (Nd, Sm, Gd, Tb, Dy) are readily obtained by the co-decomposed process attributed to their similar diffusion speed. As a proof-of-concept application, CuEu2 S3 nanocrystals showed efficient photocatalytic hydrogen production properties.

Controlling basal plane sulfur vacancy in water splitting MoSx/NiF electrocatalysts through electric-field-assisted pulsed laser ablation

Eco-friendly, efficient, and durable electrocatalysts from earth-abundant materials are crucial for water splitting through hydrogen and oxygen generation. However, available methods to fabricate electrocatalysts are either hazardous and time-consuming or require expensive equipment, hindering the large-scale, eco-friendly production of artificial fuels. Here, we present a rapid, single-step method for producing MoS_x/NiF electrocatalysts with controlled sulfur-vacancies via electric-field-assisted pulsed laser ablation (EF-PLA) in liquid and in-situ deposition on nickel foam, enabling efficient water splitting. Electric-field parameters efficiently control S-vacancy active sites in electrocatalysts. Higher electric fields yield a MoS_x/NiF electrocatalyst with a larger density of S-vacancy sites, suited for HER due to lower Gibbs free energy for H∗ adsorption, while lower electric fields produce an electrocatalyst with lower S-vacancy sites, better suited for OER, as shown by both experimental and theoretical results. The present work opens a horizon in designing high-efficiency catalysts, for a wide range of chemical reactions.

Impact of Annealing Temperature on the Morphological, Optical and Photoelectrochemical Properties of Cauliflower-like CdSe0.6Te0.4 Photoelectrodes; Enhanced Solar Cell Performance

We are reporting on the impact of air annealing temperatures on the physicochemical properties of electrochemically synthesized cadmium selenium telluride (CdSe0.6Te0.4) samples for their application in a photoelectrochemical (PEC) solar cell. The CdSe0.6Te0.4 samples were characterized with several sophisticated techniques to understand their characteristic properties. The XRD results presented the pure phase formation of the ternary CdSe0.6Te0.4 nanocompound with a hexagonal crystal structure, indicating that the annealing temperature influences the XRD peak intensity. The XPS study confirmed the existence of Cd, Se, and Te elements, indicating the formation of ternary CdSe0.6Te0.4 compounds. The FE-SEM results showed that the morphological engineering of the CdSe0.6Te0.4 samples can be achieved simply by changing the annealing temperatures from 300 to 400 °C with intervals of 50 °C. The efficiencies (ƞ) of the CdSe0.6Te0.4 photoelectrodes were found to be 2.0% for the non-annealed and 3.1, 3.6, and 2.5% for the annealed at 300, 350, and 400 °C, respectively. Most interestingly, the PEC cell analysis indicated that the annealing temperatures played an important role in boosting the performance of the photoelectrochemical properties of the solar cells.

Oxygen Vacancy-Enhanced Photoelectrochemical Water Splitting of WO3/NiFe-Layered Double Hydroxide Photoanodes

Photoelectrochemical (PEC) water splitting serves as one of the promising approaches for producing clean and renewable energy, and their solar-hydrogen energy conversion efficiency depends on the interfacial charge separation and carrier mobility. Herein, we report an effective strategy to promote the PEC performance by fabricating a WO₃ photoanode rich in oxygen vacancies (Ov) modified by NiFe-based layered double hydroxide (LDH). When WO₃-Ov/NiFe-LDH is used as a photoanode, the maximum photocurrent density at 1.8 V versus RHE has been significantly enhanced to 2.58 mA·cm^-2, which is 4.3 times higher than that of WO₃. In addition, analogues were studied in controlled experiments without Ov, which further demonstrated that the synergistic effect of NiFe-LDH and Ov resulted in increased carrier concentration and driving force. According to electrical impedance spectroscopy, X-ray photoelectron spectroscopy, and Mott-Schottky analysis, the built-in electronic field in WO₃ homojunction, along with the accelerated hole capture by the NiFe-LDH cocatalyst contributes to the improved charge separation and transport in the WO₃-Ov/NiFe-LDH electrode. This work proposes an efficient and valuable strategy for designing the structure of WO₃-based photoelectrodes.

Hierarchical SnS2/CuInS2 Nanosheet Heterostructure Films Decorated with C60 for Remarkable Photoelectrochemical Water Splitting

Rational architectural design and catalyst components are beneficial to improve the photoelectrochemical (PEC) performance. Herein, hierarchical SnS₂/CuInS₂ nanosheet heterostructure porous films were fabricated and decorated with C₆₀ to form photocathodes for PEC water reduction. Large-size CuInS₂ nanosheet films were first grown on transparent conducting glass to form substrate films. Then, small-size SnS₂ nanosheets were epitaxially grown on both sides of the CuInS₂ nanosheets to form uniform hierarchical porous laminar films. The addition of C₆₀ on the surface of the SnS₂/CuInS₂ porous nanosheets effectively increased visible light absorption of the composite photocathode. Photoluminescence spectroscopy and impedance spectroscopy analyses indicated that the formation of a SnS₂/CuInS₂ heterojunction and decoration of C₆₀ significantly increased the photocurrent density by promoting the electron-hole separation and decreasing the resistance to the transport of charge carriers. The hierarchical SnS₂/CuInS₂ nanosheet heterostructure porous films containing multiscale nanosheets and pore configurations can enlarge the surface area and enhance visible light utilization. These beneficial factors make the optimized C₆₀-decorated SnS₂/CuInS₂ photocathode exhibit much higher photocathodic current (4.51 mA cm^-2 at applied potential -0.45 V vs reversible hydrogen electrode ) and stability than the individual CuInS₂ (2.58 mA cm^-2) and SnS₂ (1.92 mA cm^-2) nanosheet film photocathodes. This study not only reveals the promise of C₆₀-decorated hierarchical SnS₂/CuInS₂ nanosheet heterostructure porous film photocathodes for efficient solar energy harvesting and conversion but also provides rational guidelines in designing high-efficiency photoelectrodes from earth-abundant and low-cost materials allowing widely practical applications.