Arginine-Based Polymer Brush Coatings with Hydrolysis-Triggered Switchable Functionalities from Antimicrobial (Cationic) to Antifouling (Zwitterionic)

Harnessing Guanidinium and Imidazole Functional Groups: A Dual-Charged Polymer Strategy for Enhanced Gene Delivery

Histidine and arginine are two amino acids that exhibit beneficial properties for gene delivery. In particular, the imidazole group of histidine facilitates endosomal release, while the guanidinium group of arginine promotes cellular entry. Consequently, a dual-charged copolymer library based on these amino acids was synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization. The content of the N-acryloyl-l-histidine (His) monomer was systematically increased, while maintaining consistent levels of methyl N-acryloyl-l-argininate hydrochloride (ArgOMe) or N-(4-guanidinobutyl)acrylamide hydrochloride (GBAm). The resulting polymers formed stable, nanosized polyplexes when complexed with nucleic acids. Remarkably, candidates with increased His content exhibited reduced cytotoxicity profiles and enhanced transfection efficiency, particularly retaining this performance level at lower pDNA concentrations. Furthermore, endosomal release studies revealed that increased His content improved endosomal release, while ArgOMe improved cellular entry. These findings underscore the potential of customized dual-charged copolymers and the synergistic effects of His and ArgOMe/GBAm in enhancing gene delivery.

Arginine-Functional Methacrylic Block Copolymer Nanoparticles: Synthesis, Characterization, and Adsorption onto a Model Planar Substrate

Recently, we reported the synthesis of a hydrophilic aldehyde-functional methacrylic polymer (Angew. Chem., 2021, 60, 12032-12037). Herein we demonstrate that such polymers can be reacted with arginine in aqueous solution to produce arginine-functional methacrylic polymers without recourse to protecting group chemistry. Careful control of the solution pH is essential to ensure regioselective imine bond formation; subsequent reductive amination leads to a hydrolytically stable amide linkage. This new protocol was used to prepare a series of arginine-functionalized diblock copolymer nanoparticles of varying size via polymerization-induced self-assembly in aqueous media. Adsorption of these cationic nanoparticles onto silica was monitored using a quartz crystal microbalance. Strong electrostatic adsorption occurred at pH 7 (Γ = 14.7 mg m-2), whereas much weaker adsorption occurred at pH 3 (Γ = 1.9 mg m-2). These findings were corroborated by electron microscopy, which indicated a surface coverage of 42% at pH 7 but only 5% at pH 3.

PMMA bone cement with L-arginine/nano fish bone nanocomplex for apatite formation

Bone cement is one of the materials used in orthopaedics that serves various functions, such as binding bone implants, replacing damaged bones and filling spaces within bones. Various materials have been used to synthesize bone cement, and one promising material for further research is fish bone waste-based bone cement. This study investigates the potential of fish bone waste-based bone cement by incorporating nano fish bone (NFB) and L-arginine (L-Arg) protein into polymethyl methacrylate (PMMA) to examine apatite growth. NFB derived from the Salmo salar fish positively influences osteoblast cell proliferation and differentiation, while L-Arg enhances biocompatibility and antibiotic properties. The NFB/L-Arg combination holds promise in accelerating new bone formation and cell growth, both of which are crucial for fracture healing and bone remodelling. Tensile strength tests reveal the superior performance of BC-PMMA-1-NFB/L-Arg (36.11 MPa) compared with commercial PMMA (32 MPa). Immersion tests with simulated body fluid (SBF) solution for 7 days reveal accelerated apatite layer formation, emphasizing the potential benefits of NFB/L-Arg in bone cement applications.

Antibacterial properties of antimicrobial peptide HHC36 modified polyetheretherketone

Introduction

Polyetheretherketone (PEEK) is considered to be a new type of orthopedic implant material due to its mechanical properties and biocompatibility. It is becoming a replacement for titanium (Ti) due to its near-human-cortical transmission and modulus of elasticity. However, its clinical application is limited because of its biological inertia and susceptibility to bacterial infection during implantation. To solve this problem, there is an urgent need to improve the antibacterial properties of PEEK implants.

Methods

In this work, we fixed antimicrobial peptide HHC36 on the 3D porous structure of sulfonated PEEK (SPEEK) by a simple solvent evaporation method (HSPEEK), and carried out characterization tests. We evaluated the antibacterial properties and cytocompatibility of the samples in vitro. In addition, we evaluated the anti-infection property and biocompatibility of the samples in vivo by establishing a rat subcutaneous infection model.

Results

The characterization test results showed that HHC36 was successfully fixed on the surface of SPEEK and released slowly for 10 days. The results of antibacterial experiments in vitro showed that HSPEEK could reduce the survival rate of free bacteria, inhibit the growth of bacteria around the sample, and inhibit the formation of biofilm on the sample surface. The cytocompatibility test in vitro showed that the sample had no significant effect on the proliferation and viability of L929 cells and had no hemolytic activity on rabbit erythrocytes. In vivo experiments, HSPEEK can significantly reduce the bacterial survival rate on the sample surface and the inflammatory reaction in the soft tissue around the sample.

Discussion

We successfully loaded HHC36 onto the surface of SPEEK through a simple solvent evaporation method. The sample has excellent antibacterial properties and good cell compatibility, which can significantly reduce the bacterial survival rate and inflammatory reaction in vivo. The above results indicated that we successfully improved the antibacterial property of PEEK by a simple modification strategy, making it a promising material for anti-infection orthopedic implants.

Surface antimicrobial functionalization with polymers: fabrication, mechanisms and applications

Undesirable adhesion of microbes such as bacteria, fungi and viruses onto surfaces affects many industries such as marine, food, textile, and healthcare. In particular in healthcare and food packaging, the effects of unwanted microbial contamination can be life-threatening. With the current global COVID-19 pandemic, interest in the development of surfaces with superior anti-viral and anti-bacterial activities has multiplied. Polymers carrying anti-microbial properties are extensively used to functionalize material surfaces to inactivate infection-causing and biocide-resistant microbes including COVID-19. This review aims to introduce the fabrication of polymer-based antimicrobial surfaces through physical and chemical modifications, followed by the discussion of the inactivation mechanisms of conventional biocidal agents and new-generation antimicrobial macromolecules in polymer-modified antimicrobial surfaces. The advanced applications of polymer-based antimicrobial surfaces on personal protective equipment against COVID-19, food packaging materials, biomedical devices, marine vessels and textiles are also summarized to express the research trend in academia and industry.

Arginine-grafted porcine pericardium by copolymerization to improve cytocompatibility, hemocompatibility and anti-calcification properties of bioprosthetic heart valve materials

Bioprosthetic heart valves (BHVs) have been used widely due to the development of transcatheter heart valve replacement technology. However, glutaraldehyde crosslinked pericardium (GA), which is widely used as a leaflet...

The Mechanisms and the Applications of Antibacterial Polymers in Surface Modification on Medical Devices

Medical device contamination caused by microbial pathogens such as bacteria and fungi has posed a severe threat to the patients' health in hospitals. Due to the increasing resistance of pathogens to antibiotics, the efficacy of traditional antibiotics treatment is gradually decreasing for the infection treatment. Therefore, it is urgent to develop new antibacterial drugs to meet clinical or civilian needs. Antibacterial polymers have attracted the interests of researchers due to their unique bactericidal mechanism and excellent antibacterial effect. This article reviews the mechanism and advantages of antimicrobial polymers and the consideration for their translation. Their applications and advances in medical device surface coating were also reviewed. The information will provide a valuable reference to design and develop antibacterial devices that are resistant to pathogenic infections.

Dual-Functional, Superhydrophobic Coatings with Bacterial Anticontact and Antimicrobial Characteristics

Bacterial pathogens are responsible for millions of cases of illnesses and deaths each year throughout the world. The development of novel surfaces and coatings that effectively inhibit and prevent bacterial attachment, proliferation, and growth is one of the crucial steps for tackling this global challenge. Herein, we report a dual-functional coating for aluminum surfaces that relies on the controlled immobilization of lysozyme enzyme (muramidase) into interstitial spaces of presintered, nanostructured thin film based on ∼200 nm silica nanoparticles and the sequential chemisorption of an organofluorosilane to the available interfacial areas. The mean diameter of the resultant lysozyme microdomains was 3.1 ± 2.5 μm with an average spacing of 8.01 ± 6.8 μm, leading to a surface coverage of 15.32%. The coating had an overall root-mean-square (rms) roughness of 539 ± 137 nm and roughness factor of 1.50 ± 0.1, and demonstrated static, advancing, and receding water contact angles of 159.0 ± 1.0°, 155.4 ± 0.6°, and 154.4 ± 0.6°, respectively. Compared to the planar aluminum, the coated surfaces produced a 6.5 ± 0.1 (>99.99997%) and 4.0 ± 0.1 (>99.99%) log-cycle reductions in bacterial surfaces colonization against Gram-negative Salmonella Typhimurium LT2 and Gram-positive Listeria innocua, respectively. We anticipate that the implementation of such a coating strategy on healthcare environments and surfaces and food-contact surfaces can significantly reduce or eliminate potential risks associated with various contamination and cross-contamination scenarios.

Switchable and Obedient Interfacial Properties That Grant New Biomedical Applications

Toward imitating the natural smartness and responsivity of biological systems, surface interfacial properties are considered to be responsive and tunable if they show a reactive behavior to an environmental stimulus. This is still quite different from many contemporary biomaterials that lack responsiveness to interact with blood and different body tissues in a physiological manner. Meanwhile it is possible to even go one step further from responsiveness to dual-mode switchability and explore "switchable" or "reversible" responses of synthetic materials. We understand "switchable biomaterials" as materials undergoing a stepwise, structural transformation coupled with considerable changes of interfacial and other surface properties as a response to a stimulus. Therewith, a survey on stimuli-induced dynamic changes of charge, wettability, stiffness, topography, porosity, and thickness/swelling is presented here, as potentially powerful new technologies especially for future biomaterial development. Since living cells constantly sense their environment through a variety of surface receptors and other mechanisms, these obedient interfacial properties were particularly discussed regarding their advantageous multifunctionality for protein adsorption and cell adhesion signaling, which may alter in time and with environmental conditions.

Self-assembled micro-fibres by oxime connection of linear peptide amphiphiles

Linear peptide amphiphiles are excellent biocompatible scaffolds for the hierarchical self-assembly of one-dimensional nano-structures in aqueous media. However, their structural exploration and screening of self-assembling properties are often limited by time-consuming synthesis and purification steps. We here describe the application of an oxime bond as a powerful synthetic tool towards the conjugation of peptide heads bearing a hydroxylamine group with hydrophobic aldehyde tails. This methodology allowed the quick preparation of a small library of oxime-connected peptide amphiphiles, whose supramolecular screening revealed nano-to-micro-fibrillation with dependency on their chemical structure. These results demonstrate the simplicity and the synthetic potential of the oxime conjugation for the preparation of peptide amphiphiles with improved self-assembling capabilities.

Responsive and Synergistic Antibacterial Coatings: Fighting against Bacteria in a Smart and Effective Way

Antibacterial coatings that eliminate initial bacterial attachment and prevent subsequent biofilm formation are essential in a number of applications, especially implanted medical devices. Although various approaches, including bacteria-repelling and bacteria-killing mechanisms, have been developed, none of them have been entirely successful due to their inherent drawbacks. In recent years, antibacterial coatings that are responsive to the bacterial microenvironment, that possess two or more killing mechanisms, or that have triggered-cleaning capability have emerged as promising solutions for bacterial infection and contamination problems. This review focuses on recent progress on three types of such responsive and synergistic antibacterial coatings, including i) self-defensive antibacterial coatings, which can "turn on" biocidal activity in response to a bacteria-containing microenvironment; ii) synergistic antibacterial coatings, which possess two or more killing mechanisms that interact synergistically to reinforce each other; and iii) smart "kill-and-release" antibacterial coatings, which can switch functionality between bacteria killing and bacteria releasing under a proper stimulus. The design principles and potential applications of these coatings are discussed and a brief perspective on remaining challenges and future research directions is presented.

Thiophene-Conjugated Ligand Probe for Nonenzymatic Turn-On Electrochemical Protein Detection

A new type of turn-on electrochemical protein detection is developed using an electropolymerizable molecular probe. To detect trypsin, a benzamidine ligand is conjugated with a thiophene moiety. Encapsulation of the probe in the trypsin pocket prevents electropolymerization, leading to efficient electron transfer from the electrolyte to the electrode. In contrast, unbound probes can become electropolymerized, yielding a polythiophene layer on the electrode. The polythiophene formed this way suppressed electron transfer. The detection limit of trypsin using this electrochemical strategy is 50 nM. The method is shown to be useful for nonenzymatic turn-on electrochemical detection.

Ink-Jet Printing-Assisted Modification on Polyethersulfone Membranes Using a UV-Reactive Antimicrobial Peptide for Fouling-Resistant Surfaces

Antimicrobial peptides (AMPs) are promising candidates for surface coatings to control biofilm growth on water treatment membranes because of their broad activity and the low tendency of bacteria to develop resistance to AMPs. However, general and convenient surface modification methods are limited, and a deeper understanding of the antimicrobial mechanism of action is needed for surface-attached AMPs. Here, we show a method for covalently attaching AMPs on porous ultrafiltration membranes using ink-jet printing and provide insight into the mode of action for the covalently tethered peptide RWRWRWA-(Bpa) (Bpa, 4-benzophenylalanine) against Pseudomonas aeruginosa. AMP-coated ultrafiltration membranes showed surface antibacterial activity and reduced biofilm growth. Fluorescence microscopy analysis revealed that the modified surfaces could cause cell membrane disruption, which was seen by live uptake of propidium iodide stain, and scanning electron microscopy images showed compromised cell membranes of attached bacteria. This study indicated that the mode of action of covalently tethered AMPs was similar to that of freely soluble AMPs. The deeper understanding of the mode of action of AMPs covalently attached to surfaces could lead to a more rational approach for designing surfaces with antibacterial activity.