Nanocomposite Microgels for the Selective Separation of Halogen Compounds from Aqueous Solution

Multi-layer core/shell microgels with internal complexity and their nanocomposites

In this study, we show that core/shell (CS) microgels with multiple layers can be created via a one-pot precipitation polymerization, in which monomers are added to the reaction flask multiple times once most of the previous monomer has been consumed. The complex internal structures of the microgels were examined using a combination of scattering and microscopy techniques.

The compression of deformed microgels at an air/water interface

The compression of deformed hydrogel microspheres (microgels) at air/water interfaces was investigated using a Langmuir-Blodgett trough with simultaneous in situ visualization of the process using a fluorescent microscope. The relationship between the structure of the microgel arrays and the compression behavior was clarified using microgels with different degrees of crosslinking.

Clarification of Surface Deswelling of Thermoresponsive Microgels by Electrophoresis

Although many investigations of thermoresponsive microgels have been reported, their surface properties, which are crucial in colloid science, are still not fully understood. In this study, microgels with surface-localized charged groups were synthesized by precipitation polymerization, and their electrophoretic behaviors were analyzed using a modified version of Ohshima's equation to obtain two surface properties of the soft particles: the softness parameter and the surface charge density. This systematic evaluation allows us to discuss the thermoresponsiveness of the overall microgels and their surfaces separately. Furthermore, the validity of the surface properties obtained from electrophoresis was verified by comparing them with the results of seeded emulsion polymerization in the presence of the microgels and the force-indentation curves obtained via high-speed atomic force microscopy (HS-AFM).

Nanostructure and thermoresponsiveness of poly(N-isopropyl methacrylamide)-based hydrogel microspheres prepared via aqueous free radical precipitation polymerization

Thermoresponsive hydrogel microspheres (microgels) are smart materials that quickly respond to external stimuli, and their thermoresponsiveness can be tuned by varying the constituent chemical species. Although uniformly sized microgels can be prepared via aqueous free radical precipitation polymerization, the nanostructure of the obtained microgels is complex and remains unclear so far. In the present study, the nanostructure and thermoresponsiveness of poly(N-isopropyl methacrylamide) (pNIPMAm)-based microgels, which have a volume-transition temperature of ∼43 °C, were evaluated mainly using temperature-controllable high-speed atomic force microscopy. These observations, which are characterized by high spatio-temporal resolution, revealed that the pNIPMAm microgels have a peculiar heterogeneous structure, for example a core-shell and non-thermoresponsive nanostructure in the core region, that originates from the precipitation polymerization process. Furthermore, it was found that the adsorption concentration of the microgels on the substrate is one of the keys for controlling their thermoresponsiveness. These findings can be expected to advance the design of new materials such as thermoresponsive nanosheets and stimuli-responsive coatings.

Nanostructures, Thermoresponsiveness, and Assembly Mechanism of Hydrogel Microspheres during Aqueous Free-Radical Precipitation Polymerization

Although techniques to produce uniformly sized hydrogel microspheres (microgels) by aqueous free-radical precipitation polymerization are well established, the details of the polymerization process remain mysterious. In the present study, the structural evolution and thermoresponsiveness of the developing microgels during the polymerization were evaluated by temperature-controlled high-speed atomic force microscopy. This analysis clarified that the swelling properties of the precursor microgels formed in the early stages of the polymerization are quite low due to the high incorporation of cross-linkers and that non-thermoresponsive deca-nanosized spherical domains are already present in the precursor microgels. Furthermore, we succeeded in tracking the formation of nuclei and their growth process, which has never been fully understood, in aqueous solution by real-time observations. These findings will help us to design functional microgels with the desired nanostructures via precipitation polymerization.

Mechanical properties of temperature-responsive gels containing ethylene glycol in their side chains

The mechanical properties of temperature-responsive and biocompatible poly(oligo-ethylene glycol methyl ether methacrylate)-based gels were investigated using dynamic viscoelasticity measurements so as to find applications in tissue and biomedical engineering. The gels were copolymerized using two ethylene glycol methacrylate monomers with diethylene glycol side chains: diethylene glycol methacrylate (MeO₂MA), which contains two ethylene oxide units, and oligo-ethylene glycol methyl ether methacrylate (OEGMA) with either four or five ethylene oxide units. The storage (G') and loss (G'') moduli of these gels exhibit unique temperature-responsive behavior and depend on the copolymerization ratio. In MeO₂MA-rich gels, phase separation occurred with increasing temperature, resulting in a significant increase in G' and the disappearance of the frequency dependence of G''. Although phase separation of OEGMA-rich gels was also observed with increasing temperature, it resulted in only a slight increase in the storage modulus due to the steric hindrance of the side chain. The mechanical properties of these gels are thus found to be strongly affected by a slight difference in the number of ethylene oxide groups in their side chains.

Scaling Laws in the Diffusive Release of Neutral Cargo from Hollow Hydrogel Nanoparticles: Paclitaxel-Loaded Poly(4-vinylpyridine)

We study the nonequilibrium diffusive release of electroneutral molecular cargo encapsulated inside hollow hydrogel nanoparticles. We propose a theoretical model that includes osmotic, steric, and short-range polymer-cargo attractions to determine the effective cargo-hydrogel interaction, u_eff*, and the effective diffusion coefficient of the cargo inside the polymer network, D_eff*. Using dynamical density functional theory (DDFT), we investigate the scaling of the characteristic release time, τ_1/2, with the key parameters involved in the process, namely, u_eff*, D_eff*, and the swelling ratio. This effort represents a full study of the problem, covering a broad range of cargo sizes and providing predictions for repulsive and attractive polymer shells. Our calculations show that the release time through repulsive polymer networks scales with q²e^βu_eff*/D_eff* for βu_eff* ≫ 1. In this case, the cargo molecules are excluded from the shell of the hydrogel. For attractive shells, the polymer retains the cargo molecules on its internal surface and its interior, and the release time grows exponentially with the attraction strength. The DDFT calculations are compared to an analytical model for the mean first passage time, which provides an excellent quantitative description of the kinetics for both repulsive and attractive shells without fitting parameters. Finally, we apply the method to reproduce experimental results on the release of paclitaxel from hollow poly(4-vinylpyridine) nanoparticles and find that the slow release of the drug can be explained in terms of the strong binding attraction between the drug and the polymer.

Hydrophobic Monomers Recognize Microenvironments in Hydrogel Microspheres during Free-Radical-Seeded Emulsion Polymerization

The three-dimensional structure of nanocomposite microgels was precisely determined by cryo-electron micrography. Several nanocomposite microgels that differ with respect to their nanocomposite structure, which were obtained from seeded emulsion polymerization in the presence of microgels, were used as model nanocomposite materials for cryo-electron micrography. The obtained three-dimensional segmentation images of these nanocomposite microgels provide important insights into the interactions between the hydrophobic monomers and the microgels, that is, hydrophobic styrene monomers recognize molecular-scale differences in polarity within the microgels during the emulsion polymerization. This result led to the formation of unprecedented multi-layered nanocomposite microgels, which promise substantial potential in colloidal applications.

The Belousov-Zhabotinsky Reaction in Thermoresponsive Core-Shell Hydrogel Microspheres with a Tris(2,2'-bipyridyl)ruthenium Catalyst in the Core

The Belousov-Zhabotinsky (BZ) reaction shows temporal or spatiotemporal structures such as redox oscillation of the catalyst, [ruthenium(II)tris(2,2'-bipyridine)][PF₆]₂ ([Ru(bpy)₃][PF₆]₂). In this study, autonomously oscillating hydrogel microspheres (microgels) were investigated, which show swelling/deswelling oscillation induced by the redox oscillation of the BZ reaction inside the gel. Despite the periodically and autonomously induced oscillation that does not require an external stimulus, it has not been possible to perform any manipulation of the oscillatory behavior over time. The results of the present study show that it is possible to reversibly switch the microgel oscillations from an "on" active state of the BZ reaction to an "off" inactive state by changing the temperature in combination with thermoresponsive microgels. To realize on-demand switching, the construction of double-shell structures is crucial; the thermoresponsive first shell allows the microgels to modulate the diffusion of the substrates or intermediates in the BZ reaction, while the second shell maintains colloidal stability under high temperatures and high ion concentrations. The functionalized double-shell microgels were prepared via multistep seeded precipitation polymerization. The oscillatory switching behavior of the BZ reaction was observed directly and evaluated by ultraviolet-visible (UV-vis) spectroscopy. The central concept of this study, i.e., "on-off switching" can be expected to benefit the development of advanced bioinspired materials.

Crossover of the effective charge in ionic thermoresponsive hydrogel particles

We use a generalized nonlinear Poisson-Boltzmann cell model that includes excluded-volume effects to investigate whether the effective charge (Z_{eff}) of charged thermosensitive hydrogel particles increases or decreases upon the hydrogel thermal collapse. We find the existence of a crossover charge, Z^{*}, that separates two regimes. For hydrogel bare charges below Z^{*} the system shows a behavior consistent with theories based on linear approximations, i.e., Z_{eff} increases in the collapsed state. However, for bare charges above Z^{*}, the system enters an anomalous regime, in which Z_{eff} decreases in the collapsed state. We show that diluted hydrogel suspensions at low ionic strength are more likely to follow the anomalous behavior. Our theory provides a full physical justification for the controversial theoretical and experimental results reported in this regard, and describes how the interplay between electrostatic, excluded-volume and entropic effects affects this crossover.

Effect of Charge Groups Immobilized in Hydrogel Microspheres during the Evaporation of Aqueous Sessile Droplets

In contrast to conventional dispersions of solid microspheres, dilute dispersions containing soft hydrogel microspheres (microgels) exhibit unique drying behavior due to their selective adsorption at the air/water interface of sessile droplets. So far, the impact of the size, chemical composition, and softness (degree of cross-linking) of microgels has been investigated. In the present study, we present the impact of charged groups introduced in the microgels on the adsorption and assembly behavior of these microgels at the air/water interface using a series of microgels with different amounts and distribution of charged groups. A series of experiments under different conditions (pH value and ionic strength) afforded information that clarified the adsorption, interpenetration, and deformation behavior of such charged microgels at the air/water interface. The results indicate that the adsorption and the deformation of charged microgels at the air/water interface are suppressed by the presence of charged groups. Moreover, charged microgels adsorbed at the interface are more dynamic and not highly entangled with each other; i.e., even though the more dynamic charged microgels are arranged at the interface, these arranged structures are disrupted upon transferring onto the solid substrates. Our findings of this study can be expected to promote the further development of applications, e.g., foams and emulsions stabilized by microgels, that crucially requires an in-depth understanding of the adsorption behavior of charged microgels at the air/water interface such as coatings.

Non-Thermoresponsive Decanano-sized Domains in Thermoresponsive Hydrogel Microspheres Revealed by Temperature-Controlled High-Speed Atomic Force Microscopy

Despite the tremendous efforts devoted to the structural analysis of hydrogel microspheres (microgels), many details of their structures remain unclear. Reported in this study is that thermoresponsive poly(N-isopropyl acrylamide) (pNIPAm)-based microgels exhibit not only the widely accepted core-shell structures, but also inhomogeneous decanano-sized non-thermoresponsive spherical domains within their dense cores, which was revealed by temperature-controlled high-speed atomic force microscopy (TC-HS-AFM). Based on a series of experiments, it is concluded that the non-thermoresponsive domains are characteristic for pNIPAm microgels synthesized by precipitation polymerization, and plausible structures for microgels prepared by other polymerization techniques are proposed.

Nonequilibrium Uptake Kinetics of Molecular Cargo into Hollow Hydrogels Tuned by Electrosteric Interactions

Hollow hydrogels represent excellent nano- and microcarriers due to their ability to encapsulate and release large amounts of cargo molecules (cosolutes) such as reactants, drugs, and proteins. In this work, we use a combination of a phenomenological effective cosolute-hydrogel interaction potential and dynamic density functional theory to investigate the full nonequilibrium encapsulation kinetics of charged and dipolar cosolutes by an isolated charged hollow hydrogel immersed in a 1:1 electrolyte aqueous solution. Our analysis covers a broad spectrum of cosolute valences ( z_c) and electric dipole moments (μ_c), as well as hydrogel swelling states and hydrogel charge densities. Our calculations show that, close to the collapsed state, the polar cosolutes are predominantly precluded and the encapsulation process is strongly hindered by the excluded-volume interaction exerted by the polymer network. Different equilibrium and kinetic sorption regimes (interface versus interior) are found depending on the value and sign of z_c and the value of μ_c. For cosolutes of the same sign of charge as the gel, the superposition of steric and electrostatic repulsion leads to an "interaction-controlled" encapsulation process, in which the characteristic time to fill the empty core of the hydrogel grows exponentially with z_c. On the other hand, for cosolutes oppositely charged to the gel, we find a "diffusion-controlled" kinetic regime, where cosolutes tend to rapidly absorb into the hydrogel membrane and the encapsulation rate depends only on the cosolute diffusion time across the membrane. Finally, we find that increasing μ_c promotes the appearance of metastable and stable surface adsorption states. For large enough μ_c, the kinetics enters an "adsorption-hindered diffusion", where the enhanced surface adsorption imposes a barrier and slows down the uptake. Our study represents the first attempt to systematically describe how the swelling state of the hydrogel and other leading physical interaction parameters determine the encapsulation kinetics and the final equilibrium distribution of polar molecular cargo.

Monitoring Thermoresponsive Morphological Changes in Individual Hydrogel Microspheres

Real-time morphology/structure changes in individual hydrogel microspheres (microgels) were directly visualized at high spatiotemporal resolution using high-speed atomic force microscopy (HS-AFM) under temperature control ranging from room temperature to ∼40 °C. The recorded HS-AFM movies demonstrate that the size and morphology of thermoresponsive poly(N-isopropyl acrylamide)-based microgels change with increasing temperature at the individual microgel level. Specifically, the height of the microgels gradually decreases and domain structures appeared even below the volume phase transition temperature. Moreover, the domain structure is retained, even after the microgels have fully collapsed. The present study thus demonstrates that temperature-controlled HS-AFM is a useful tool for monitoring stimulus-responsiveness of microgels. In the near future, it should furthermore be possible to extend this temperature-controlled HS-AFM to other stimulus-responsive materials, including autonomously oscillating microgels.

Quenching of fully symmetric mixtures of oppositely charged microgels: the role of soft stiffness

Using molecular dynamics simulations, we investigate the self-assembly of a coarse-grained binary system of oppositely charged microgels, symmetric in size and concentration. The microgel pair interactions are described by an effective pair potential which implicitly accounts for the averaged ionic contributions, in addition to a short-range elastic repulsion that accounts for the overlapping of the polymer chains, the latter being described by the Hertzian interaction. Particular emphasis is placed on the role played by the strength of the soft repulsive interaction on the resulting particle aggregation. It is found that the possibility of particle inter-penetration in oppositely charged soft particles results in a much wider variety of cluster morphologies in comparison with their hard-spheres counterparts. Specifically, the softness of the steric interactions enhances the competition between repulsive and attractive electrostatic interactions, leading to the formation of aggregates that are comprised of strongly bounded charged particles displaying a low degree of charge ordering.

Self-Organization of Soft Hydrogel Microspheres during the Evaporation of Aqueous Droplets

The unique drying behavior of aqueous droplets that contain soft hydrogel microspheres (microgels) upon evaporation was systematically investigated. Compared to the ring-shaped deposits that are obtained from drying solid microsphere dispersions, we have previously reported that uniformly ordered thin films are obtained from drying ∼1.2 μm-sized poly( N-isopropyl acrylamide) microgel dispersions. In the present study, we thoroughly investigated several hitherto unexplored aspects of this self-organization, such as the effect of the size, chemical structure, and "softness" of the microgels (or rigid microspheres). For the macro- and microscopic observation of the drying behavior of various microsphere dispersions, an optical microscope and a digital camera were employed. The results suggested that the convection in the aqueous droplets plays an important role for the transportation of the microgels to the air/water interface, where the softness and surface activity of the microgels strongly affects the adsorption of the microgels. On the basis of these discoveries, a design concept for the rapid formation of uniform thin films of soft microgels was proposed.

Controlled Separation and Release of Organoiodine Compounds Using Poly(2-methoxyethyl acrylate)-Analogue Microspheres

A selective adsorption/desorption of organoiodine compounds was achieved on poly(2-methoxyethyl acrylate)-analogue microspheres, wherein the side chains in the polymers act as halogen-bonding sites. These results demonstrate that the halogen-bonding sites in the side chains exhibit adequate specific affinity for organoiodine compounds. In addition, the water-swollen pMEA-analogue microspheres (microgels) showed a thermoresponsive swelling/deswelling behavior that permitted a controlled release of the organoiodine compounds upon changing the temperature. Thus, it seems plausible that a variety of problems associated with, e.g., the recovery of rare iodine-containing compounds, such as the marine-derived iodine compounds, the delivery of iodine-containing drugs, or the removal of halogen compounds from wastewater, could be resolved by polymer microspheres that exhibit controlled halogen bonding.