Mesoscopic Structures of Poly(carboxybetaine) Block Copolymer and Poly(ethylene glycol) Block Copolymer in Solutions

Assessing the structural stability and drug encapsulation efficiency of poly(ethylene glycol)-poly(L-lactic acid) nanoparticles loaded with atorvastatin calcium: Based on dissipative particle dynamics

Block polymer micelles have been proven highly biocompatible and effective in improving drug utilization for delivering atorvastatin calcium. Therefore, it is of great significance to measure the stability of drug-loading nano micelles from the perspective of block polymer molecular sequence design, which would provide theoretical guidance for subsequent clinical applications. This study aims to investigate the structural stability of drug-loading micelles formed by two diblock/triblock polymers with various block sequences through coarse-grained dissipative particle dynamics (DPD) simulations. From the perspectives of the binding strength of poly(L-lactic acid) (PLLA) and polyethylene glycol (PEG) in nanoparticles, hydrophilic bead surface coverage, and the morphological alteration of nanoparticles induced by shear force, the ratio of hydrophilic/hydrophobic sequence length has been observed to affect the stability of nanoparticles. We have found that for diblock polymers, PEG3kda-PLLA2kda has the best stability (corresponding hydrophilic coverage ratio is 0.832), while PEG4kda-PLLA5kda has the worst (coverage ratio 0.578). For triblock polymers, PEG4kda-PLLA2kda-PEG4kda has the best stability (0.838), while PEG4kda-PLLA5kda-PEG4kda possesses the worst performance (0.731), and the average performance on stability is better than nanoparticles composed of diblock polymers.

Enhanced triolein and ethyl ferulate interesterification performance by CRL-AuNPs

This study established a Candida rugosa lipase (CRL) system to catalyze triolein and ethyl ferulate interesterification. The products were identified, and the binding mode between the substrates and CRL was predicted through molecular docking. Three methods for preparing CRL-AuNPs were proposed and characterized. It was found that the addition of 40 mL of 15 nm gold nanoparticles increased the CRL activity from 3.05 U/mg to 4.75 U/mg, but the hybridization efficiency was only 32.7 %. By using 4 mL of 0.1 mg/mL chloroauric acid, the hybridization efficiency was improved to 50.7 %, but the enzyme activity was sharply decreased. However, when the molar ratio of Mb to HAuCl4 was 0.2, the hybridization efficiency increased to 71.8 %, and the CRL activity was also enhanced to 5.98 U/mg. Under optimal conditions, the enzyme activity of CRL-AuNPs③ was maintained at 95 % after 6 repetitions and 85.6 % after 30 days at room temperature.

Computational and experimental studies on the micellar morphology and emission mechanisms of AIE and H-bonding fluorescent composites

In this work, we use density functional theory (DFT) calculated competitive hydrogen bonds and dissipative particle dynamics (DPD) simulated micellar structural information to uncover the CO2-expanded liquid (CXL)-aided self-assembled structure and emission mechanisms of the self-assembled fluorescent composites (SAFCs). Herein, the SAFCs are formed through the self assembly between diblock copolymer polystyrene-b-poly(4-vinylpyridine) (PS-b-P4VP) blend and the dye molecule 4-(9-(2-(4-hydroxyphenyl)ethynyl)-7,10-diphenylfluoranthen-8-yl)phenol (4) in CO2-expanded toluene at 313.2 K and varied pressures. Firstly, from DPD simulation, we have demonstrated that the addition of CO2 to toluene favors both the expansion of the solvophobic P4VP phase and contraction of solvophilic PS chains, which facilitates the continuous morphological transitions of SAFCs from spherical micelles (3.0 MPa) through wormlike plus spherical micelles (4.0-4.8 MPa) to large vesicles (6.0-6.5 MPa) with pressure rise. Secondly, the DFT calculated bonding energies and IR spectra of the competitive hydrogen bonds help us to clarify the major type of hydrogen bonds determining the fluorescence (FL) performance of the SAFCs. Furthermore, we have revealed the SAFC emission mechanism via the pressure-tunable changes in the aggregation degrees and amount of hydrogen bonds involving 4 and P4VP chains. This work provides a good understanding for the morphology-property control of the self-assembled polymer composites in both microscopic and mesoscopic scales.

Modeling Polyzwitterion-Based Drug Delivery Platforms: A Perspective of the Current State-of-the-Art and Beyond

Drug delivery platforms are anticipated to have biocompatible and bioinert surfaces. PEGylation of drug carriers is the most approved method since it improves water solubility and colloid stability and decreases the drug vehicles’ interactions with blood components. Although this approach extends their biocompatibility, biorecognition mechanisms prevent them from biodistribution and thus efficient drug transfer. Recent studies have shown (poly)zwitterions to be alternatives for PEG with superior biocompatibility. (Poly)zwitterions are super hydrophilic, mainly stimuli-responsive, easy to functionalize and they display an extremely low protein adsorption and long biodistribution time. These unique characteristics make them already promising candidates as drug delivery carriers. Furthermore, since they have highly dense charged groups with opposite signs, (poly)zwitterions are intensely hydrated under physiological conditions. This exceptional hydration potential makes them ideal for the design of therapeutic vehicles with antifouling capability, i.e., preventing undesired sorption of biologics from the human body in the drug delivery vehicle. Therefore, (poly)zwitterionic materials have been broadly applied in stimuli-responsive “intelligent” drug delivery systems as well as tumor-targeting carriers because of their excellent biocompatibility, low cytotoxicity, insignificant immunogenicity, high stability, and long circulation time. To tailor (poly)zwitterionic drug vehicles, an interpretation of the structural and stimuli-responsive behavior of this type of polymer is essential. To this end, a direct study of molecular-level interactions, orientations, configurations, and physicochemical properties of (poly)zwitterions is required, which can be achieved via molecular modeling, which has become an influential tool for discovering new materials and understanding diverse material phenomena. As the essential bridge between science and engineering, molecular simulations enable the fundamental understanding of the encapsulation and release behavior of intelligent drug-loaded (poly)zwitterion nanoparticles and can help us to systematically design their next generations. When combined with experiments, modeling can make quantitative predictions. This perspective article aims to illustrate key recent developments in (poly)zwitterion-based drug delivery systems. We summarize how to use predictive multiscale molecular modeling techniques to successfully boost the development of intelligent multifunctional (poly)zwitterions-based systems.

Toward enzyme-responsive polymersome drug delivery

In drug delivery, enzyme-responsive drug carriers are becoming increasingly relevant because of the growing association of disease pathology with enzyme overexpression. Polymersomes are of interest to such applications because of their tunable properties. While polymersomes open up a wide range of chemical and physical properties to explore, they also present a challenge in developing generalized rules for the synthesis of novel systems. Motivated by this issue, in this perspective, we summarize the existing knowledge on enzyme-responsive polymersomes and outline the main design choices. Then, we propose heuristics to guide the design of novel systems. Finally, we discuss the potential of an integrated approach using computer simulations and experimental studies to streamline this design process and close the existing knowledge gaps.

Computer Simulations on a pH-Responsive Anticancer Drug Delivery System Using Zwitterion-Grafted Polyamidoamine Dendrimer Unimolecular Micelles

Unimolecular micelles have attracted wide attention in the field of drug delivery because of their thermodynamic stability and uniform size distribution. However, their drug loading/release mechanisms at the molecular level have been poorly understood. In this work, the stability and drug loading/release behaviors of unimolecular micelles formed using generation-5 polyamidoamine-graft-poly(carboxybetaine methacrylate) (PAMAM(G5)-PCBMA) were studied by dissipative particle dynamics simulations. In addition, the unimolecular micelles formed using generation-5 polyamidoamine-graft-poly(ethyleneglycol methacrylate) (PAMAM(G5)-PEGMA) were used as a comparison. The simulation results showed that PAMAM(G5)-PCBMA can spontaneously form core-shell unimolecular micelles. The PAMAM(G5) dendrimer constitutes a hydrophobic core to load the doxorubicin (DOX), while the zwitterionic PCBMA serves as a protective shell to improve the stability of the unimolecular micelle. The DOX can be encapsulated into the cavity of PAMAM(G5) at the physiological pH 7.4. The drug loading efficiency and drug loading content showed some regularities with the increase in the drug concentration. At the acidic pH 5.0, the loaded DOX can be released gradually from the hydrophobic core. The comparison of DOX-loaded morphologies between the PAMAM(G5)-PCBMA system and PAMAM(G5)-PEGMA system showed that the former has better monodisperse stability. This work could offer theoretical guidance for the design and development of promising unimolecular micelles for drug delivery.

Armoring bio-catalysis via structural and functional coordination between nanostructured materials and lipases for tailored applications

Nanostructured materials represent an interesting and novel class of support matrices for the immobilization of different enzymes. Owing to the high surface area, robust mechanical stability, outstanding optical, thermal, and electrical properties, nanomaterials have been rightly perceived as desired immobilization matrices for lipases immobilization with a wide array of biotechnological applications such as dairy, food technology, fine chemical, pharmaceutical, detergent, and oleochemical industries. Lipases immobilized on nanomaterials have demonstrated superior attributes than free counterparts, such as aggrandized pH and thermal stability, robustness, long-term stability, and the possibility of reuse and recycling in several times. Here we review current and state-of-the-art literature on the use of nanomaterials as novel platforms for the immobilization of lipase enzymes. The physicochemical properties and exploitation of a large number of new nanostructured materials such as carbon nanotubes, nano-silica, graphene/graphene oxide, metal nanoparticles, magnetic nanostructures, metal-organic frameworks, and hybrid nanoflowers as a host matrix to constitute robust lipases-based nanobiocatalytic systems are discussed. Conclusive remarks, trends, and future recommendations for nanomaterial immobilized enzymes are also given.

Zwitterionic Membrane via Nonsolvent Induced Phase Separation: A Computer Simulation Study

Dissipative particle dynamics (DPD) was adopted to study the nonsolvent induced phase separation (NIPS) process during a pH-responsive poly(ether sulfone) membrane preparation with a zwitterionic copolymer poly(ether sulfone)- block-polycarboxybetaine methacrylate (PES-b-PCBMA) as the blending additive. The membrane formation process and final morphology were analyzed. Simulation results show that the hydrophilic PCBMA segments enrich on the membrane surface by surface segregation and exhibit pH-responsive behavior, which is attributed to the deprotonation of the carboxylic acid group. With the polymer concentration increasing, both the shrinkage of the membrane and the flexibility of the system decrease, which also reduce the effect of surface segregation. By adjusting the blend ratio of PES-b-PCBMA with PES from 5% to 15%, the surface coverage of PCBMA segments on the membrane can be regulated. This work contributes to a better understanding on the mechanism of NIPS and can serve as a guide for the design of the polymer blend membrane.

pH-Responsive Zwitterionic Copolymer DHA-PBLG-PCB for Targeted Drug Delivery: A Computer Simulation Study

In this work, the self-assembled behaviors of zwitterionic copolymer docosahexaenoic acid- b-poly(γ-benzyl-l-glutamate)- b-poly(carboxybetaine methacrylate) (DHA-PBLG-PCB) and the loading and release mechanism of the anticancer drug doxorubicin (DOX) was investigated via computer simulations. The effects of polymer concentration, drug content, and pH on polymeric micelles were explored by dissipative particle dynamics (DPD) simulations. Simulation results show that DHA-PBLG₁₅-PCB₁₀ can self-assemble into core-shell micelles; in addition, the drug-loaded micelles have a pH-responsive feature. DOX can be encapsulated into the core-shell micelle under normal physiological pH conditions, whereas it can be released under acidic pH conditions. The self-assembled behaviors of copolymer DHA-PBLG-PEG were also studied to have a comparison with those of DHA-PBLG-PCB. The DHA-PBLG₁₅-PCB₁₀ system has a stable structure and it has a great potential to serve as drug delivery vehicles for targeted drug delivery.

Understanding the Cellular Uptake of pH-Responsive Zwitterionic Gold Nanoparticles: A Computer Simulation Study

Surface functionalization of nanoparticles (NPs) with stealth polymers (e.g., hydrophilic and zwitterionic polymers) has become a common strategy to resist nonspecific protein adsorption recently. Understanding the role of surface decoration on NP-biomembrane interactions is of great significance to promote the application of NPs in biomedical fields. Herein, using coarse-grained molecular dynamics (CGMD) simulations, we investigate the interactions between stealth polymer-coated gold nanoparticles (AuNPs) and lipid membranes. The results show that AuNPs grafted with zwitterionic polymers can more easily approach the membrane surface than those coated with hydrophilic poly(ethylene glycol) (PEG), which can be explained by the weak dipole-dipole interaction between them. For zwitterionic AuNPs which can undergo pH-dependent charge conversion, different interaction modes which depend on the polymer protonation degree are found. When the protonation degree is low, the particles just adsorb on the membrane surface; at moderate protonation degrees, the particles can directly translocate across the lipid membrane through a transient hydrophilic pore formed on the membrane surface; the particles are fully wrapped by the curved lipid membrane at high protonation degrees, which may lead to endocytosis. Finally, the effect of polymer chain length on the cellular uptake of zwitterionic polymer-coated AuNPs is considered. The results demonstrate that longer polymer chain length will block the translocation of AuNPs across the lipid membrane when the protonation degree is not high; however, it can improve the transmembrane efficiency of AuNPs at high protonation degrees. We expect that these findings are of immediate interest to the design and synthesis of pH-responsive nanomaterials based on zwitterionic polymers and can prompt their further applications in the field of biomedicine.