Understanding the Capsanthin Tails in Regulating the Hydrophilic-Lipophilic Balance of Carbon Dots for a Rapid Crossing Cell Membrane

Interfacial Engineering of Fluorescent Carbon Dots with Metal Oxides for Real-Time Visualization of Oxygen Vacancy Dynamics

Oxygen vacancy (Vo), as one of the most common surface defects, significantly influence the physiochemical properties of metal oxides. However, it remains a challenge for existing techniques to visualize the evolution of Vo during redox process due to its heterogeneous distribution, small size, and dynamic nature. Herein, the real-time monitoring of such microscopic interfacial events is reported by advantage of the high-contrast fluorescence response of carbon dots (H-CDs) to Vo. The green emissive H-CDs possess a unique disc-shaped structure and exceptional hydrophilicity, allowing their tight adhesion to the surfaces of Vo-rich MgO by simple mixing. Subsequently, a water involved interfacial reaction occurred between H-CDs and Vo, resulting in gradual quenching of the original green emission and simultaneously emergence of bright red fluorescence. Moreover, the spatiotemporal diffusion dynamics and reaction kinetics are investigated by confocal laser scanning microscopy, revealing the time-dependent reorganization and structural heterogeneity at the interface. The finding provides a new toolbox for in situ imaging of Vo-triggered phenomena at a microscopic level, which will be helpful in promoting the rational design of oxide materials.

Food Additives and Evolved Methods of Detection: A Review

Food additives are essential constituents of food products in the modern world. The necessity of food processing went up rapidly as to meet requirements including, imparting desirable properties like preservation, enhancement and regulation of color and taste. The methods of identification and analysis of such substances are crucial. With the advancement of technology, a variety of techniques are emerging for this purpose which have many advantages over the existing conventional ways. This review is on different kinds of additives used in the food industry and few prominent methods for their determination ranging from conventional chromatographic techniques to the recently evolved nano-sensor techniques.

Carbon Dots Derived from Traditional Chinese Medicines with Bioactivities: A Rising Star in Clinical Treatment

In the field of carbon nanomaterials, carbon dots (CDs) have become a preferable choice in biomedical applications. Based on the concept of green chemistry, CDs derived from traditional Chinese medicines (TCMs) have attracted extensive attention, including TCM charcoal drugs, TCM extracts, and TCM small molecules. The design and preparation of CDs from TCMs (TCMs-CDs) can improve the inherent characteristics of TCMs, such as solubility, particle size distribution, and so on. Compared with other precursor materials, TCMs-CDs have outstanding intrinsic bioactivities and potential pharmacological effects. However, the research of TCMs-CDs in biomedicine is not comprehensive, and their mechanisms have not been understood deeply either. In this review, we will provide concise insights into the recent development of TCMs-CDs, with a major focus on their preparation, formation, precursors, and bioactivities. Then we will discuss the perfect transformation from TCMs to TCMs-CDs. Finally, we discuss the opportunities and challenges for the application of TCMs-CDs in clinical treatment.

Synthesis, properties and mechanism of carbon dots-based nano-antibacterial materials

Antibiotics play an important role in the treatment of diseases, but bacterial resistance caused by their widespread and unreasonable use has become an urgent problem in clinical treatment. With the rapid advancement of nanoscience and nanotechnology, the development of nanomedicine has been transformed into a new approach to the problem of bacterial resistance. As a new type of carbon-based nanomaterial, carbon dots (CDs) have attracted the interest of antibacterial researchers due to their ease of preparation, amphiphilicity, facile surface functionalization, and excellent optical properties, among other properties. This article reviewed the synthesis methods and properties of various CDs and their composites in order to highlight the advancements in the field of CDs-based antibacterial agents. Then we focused on the relationship between the principal properties of CDs and the antibacterial mechanism, including the following: (1) the physical damage caused by the small size, amphiphilicity, and surface charge of CDs. (2) Photogenerated electron transfer characteristics of CDs that produce reactive oxygen species (ROS) in themselves or in other compounds. The ability of ROS to oxidize can lead to the lipid peroxidation of cell membranes, as well as damage proteins and DNA. (3) The nano-enzyme properties of CDs can catalyze reactions that generate ROS. (4) Synergistic antibacterial effect of CDs and antibiotics or other nanocomposites. Finally, we look forward to the challenges that CDs-based nanocomposites face in practical antibacterial applications and propose corresponding solutions to further expand the application potential of nanomaterials in the treatment of infectious diseases, particularly drug-resistant bacterial infections.

Carbon Dot Therapeutic Platforms: Administration, Distribution, Metabolism, Excretion, Toxicity, and Therapeutic Potential

Ultrasmall nanoparticles are often grouped under the broad umbrella term of "nanoparticles" when reported in the literature. However, for biomedical applications, their small sizes give them intimate interactions with biological species and endow them with unique functional physiochemical properties. Carbon quantum dots (CQDs) are an emerging class of ultrasmall nanoparticles which have demonstrated considerable biocompatibility and have been employed as potent theragnostic platforms. These particles find application for increasing drug solubility and targeting, along with facilitating the passage of drugs across impermeable membranes (i.e., blood brain barrier). Further functionality can be triggered by various environmental conditions or external stimuli (i.e., pH, temperature, near Infrared (NIR) light, ultrasound), and their intrinsic fluorescence is valuable for diagnostic applications. The focus of this review is to shed light on the therapeutic potential of CQDs and identify how they travel through the body, reach their site of action, administer therapeutic effect, and are excreted. Investigation into their toxicity and compatibility with larger nanoparticle carriers is also examined. The future of CQDs for theragnostic applications is promising due to their multifunctional attributes and documented biocompatibility. As nanomaterial platforms become more commonplace in clinical treatments, the commercialization of CQD therapeutics is anticipated.

Highly fluorescent carbon dots as novel theranostic agents for biomedical applications

As an emerging fluorescent nanomaterial, carbon dots (CDs) exhibit many attractive physicochemical features, including excellent photoluminescence properties, good biocompatibility, low toxicity and the ability to maintain the unique properties of the raw material. Therefore, CDs have been intensively pursued for a wide range of applications, such as bioimaging, drug delivery, biosensors and antibacterial agents. In this review, we systematically summarize the synthesis methods of these CDs, their photoluminescence mechanisms, and the approaches for enhancing their fluorescence properties. Particularly, we summarize the recent research on the synthesis of CDs from drug molecules as raw materials and introduce the representative application aspects of these fascinating CDs. Finally, we look into the future direction of CDs in the biomedical field and discuss the challenges encountered in the current development.

Biomass-Derived Sulfur, Nitrogen Co-Doped Carbon Dots for Colorimetric and Fluorescent Dual Mode Detection of Silver (I) and Cell Imaging

A method for green synthesis of sulfur, nitrogen co-doped photoluminescence carbon dots (S,N/CDs) originating from two natural biomass was proposed. By simple hydrothermal heating of bean pod and onion, blue emission CDs were prepared. Ag+ can effectively quench the as-prepared S,N/CDs. Under optimized conditions, the linear range of the established method for Ag+ detection was 0.1-25 μM, and the detection of limit based on 3S/N was 37 nM. More interestingly, the addition of Ag+ can induce an evident color change of S,N/CDs from yellow to brown under sunlight. The developed method was applied for detection of Ag+ in river water and tap water samples. Satisfied recoveries ranging from 96.0 to 102.0% with precision below 4.1% were obtained. S,N/CDs showed low toxicity toward 4T1 cells, which also can be extended to cellular imaging and intracellular Ag+ detection. The simple and green approach proposed here could meet the requirements for bioimaging and environmental monitoring.

Copper-Doped Carbon Dots for Optical Bioimaging and Photodynamic Therapy

Carbon dots (CDs), as an effective bioimaging agent, have aroused widespread interest. With the increasing number of CDs used in photodynamic therapy (PDT), developing efficient CDs with multiple functions such as imaging and phototherapy has become a new challenge. Herein, a new type of copper-doped CDs (Cu-CDs) with a high fluorescence quantum yield of 24.4% was synthesized from a copper complex of poly(acrylic acid) through coordination between the carboxyl group and copper ions. Owing to their good solubility, bright fluorescence, and low cytotoxicity, the Cu-CDs can be used for fluorescence imaging in both the HeLa (human cervical cancer) cell line and SH-SY5Y (human neuroblastoma cells) multicellular spheroids (3D MCs). More importantly, the Cu-CDs show a high quantum yield of singlet oxygen (¹O₂; 36%), good photoinduced cytotoxicity, and effective inhibition of 3D MC growth. Therefore, the Cu-CDs can be used as a promising imaging-guided PDT agent. This study provides a new carbon-based nanomaterial for multifunctional photodiagnostic and therapeutic agents for biological applications.

Hydrophobic carbon dots with blue dispersed emission and red aggregation-induced emission

Carbon dots (CDs) have been studied for years as one of the most promising fluorescent nanomaterials. However, CDs with red or solid-state fluorescence are rarely reported. Herein, through a one-pot solvothermal treatment, hydrophobic CDs (H-CDs) with blue dispersed emission and red aggregation-induced emission are obtained. When water is introduced, the hydrophobic interaction leads to aggregation of the H-CDs. The formation of H-CD clusters induces the turning off of the blue emission, as the carbonized cores suffer from π-π stacking interactions, and the turning on of the red fluorescence, due to restriction of the surfaces' intramolecular rotation around disulfide bonds, which conforms to the aggregation-induced-emission phenomenon. This on-off fluorescence of the H-CDs is reversible when the H-CD powder is completely dissolved. Moreover, the H-CD solution dispersed in filter paper is nearly colorless. Finally, we develop a reversible two switch-mode luminescence ink for advanced anti-counterfeiting and dual-encryption.

Novel properties and applications of carbon nanodots

In the most recent decade, carbon dots have drawn intensive attention and triggered substantial investigation. Carbon dots manifest superior merits, including excellent biocompatibility both in vitro and in vivo, resistance to photobleaching, easy surface functionalization and bio-conjugation, outstanding colloidal stability, eco-friendly synthesis, and low cost. All of these endow them with the great potential to replace conventional unsatisfactory fluorescent heavy metal-containing semiconductor quantum dots or organic dyes. Even though the understanding of their photoluminescence mechanism is still controversial, carbon dots have already exhibited many versatile applications. In this article, we summarize and review the recent progress achieved in the field of carbon dots, and provide a comprehensive summary and discussion on their synthesis methods and emission mechanisms. We also present the applications of carbon dots in bioimaging, drug delivery, microfluidics, light emitting diode (LED), sensing, logic gates, and chiral photonics, etc. Some unaddressed issues, challenges, and future prospects of carbon dots are also discussed. We envision that carbon dots will eventually have great commercial utilization and will become a strong competitor to some currently used fluorescent materials. It is our hope that this review will provide insights into both the fundamental research and practical applications of carbon dots.

Biocompatible fluorescent carbon quantum dots prepared from beetroot extract for in vivo live imaging in C. elegans and BALB/c mice

Luminescent carbon quantum dots (CQDs) prepared from aqueous beetroot extract were developed as unique fluorescent nanomaterials for in vivo live animal imaging applications. Blue (B) and green (G) emitting environmentally benign CQDs (particle size of 5 nm and 8 nm, respectively) exhibited bright fluorescence in aqueous medium and were found to be biocompatible, photostable and non-toxic in animal models. The in vivo imaging and toxicity evaluation of both CQDs were performed for the first time in the Caenorhabditis elegans (C. elegans) model, which revealed consistent fluorescence in the gut tissues of the worms without exerting any sign of toxic effects on the nematodes. The in vivo bio-distribution of G-CQDs given by tail vein injection in live BALB/c mice showed optical signals in the lower abdominal regions, mainly in the intestine, and cleared from the body through faeces. The tremendous potential shown by these eco-friendly CQDs in the C. elegans and mice models advocates new hopes for greener CQD nanomaterials as diagnostic tools in the biomedical field.

Polyaniline Nanofibers: Their Amphiphilicity and Uses for Pickering Emulsions and On-Demand Emulsion Separation

The wetting property of nanomaterials is of great importance to both fundamental understanding and potential applications. However, the study on the intrinsic wetting property of nanomaterials is interfered by organic capping agents, which are often used to lower the surface energy of nanomaterials and avoid their irreversible agglomeration. In this work, the wetting property of the nanostructured polyaniline that requires no organic capping agents is investigated. Compared to hydrophilic granular particulates, polyaniline nanofibers are amphiphilic and have an excellent capability of creating Pickering emulsions at a wide range of pH. It is suggested that polyaniline nanofibers can be easily wetted by water and oil. Furthermore, the amphiphilic polyaniline nanofibers as building blocks can be used to construct filtration membranes with a small pore size. The wetting layer of the continuous phase of emulsions in the porous nanochannels efficiently prevents the permeation of the dispersed phase, realizing high-efficiency on-demand emulsion separation.

A facile and green approach to prepare carbon dots with pH-dependent fluorescence for patterning and bioimaging

Carbon dots prepared with the adoption of ubiquitous natural fruit juices as precursors have good applications in pH sensing, patterning and bioimaging.