Acetate-Induced Disassembly of Spherical Iron Oxide Nanoparticle Clusters into Monodispersed Core-Shell Structures upon Nanoemulsion Fusion

Geometry and Surface Area Optimization in Iron Oxide Nanoparticles for Enhanced Magnetic Properties

Iron oxide nanoparticles (IONPs) are recognized for their potential in biomedical applications due to their distinctive physicochemical properties. This study investigates the synthesis of IONPs with various geometric morphologies-cubic, star-like, truncated icosahedron, and spherical-via thermal decomposition to enhance their utility in magnetic resonance imaging (MRI) and targeted drug delivery. X-ray diffraction analysis verified the Fe3O4 phase in all nanoparticles, illustrating the synthesis's efficacy. Particle morphologies were well-defined, with sizes ranging from 10 to 150 nm, as determined by transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Magnetic evaluations using a vibrating sample magnetometer (VSM-PPMs) demonstrated their superparamagnetic behavior, with larger particles exhibiting greater saturation magnetization. Notably, truncated icosahedron and cubic IONPs showed superior transverse relaxation rates, with r2 values of 56.77 s1 mM1 and 42.67 s1 mM1, respectively. These results highlight the potential of customizing IONP geometries to optimize their magnetic properties and increase surface area available for functionalization, thereby improving their efficacy for biomedical applications.

Design of Eu(TTA)3phen-incorporated SiO2-coated transition metal oxide nanoparticles for efficient luminescence and magnetic performance

The development of multifunctional nanoparticles (NPs) combining individual properties, such as magnetic, luminescence, and optical properties, has attracted significant research interest. In this study, europium (Eu)-incorporating iron oxide nanoparticles (IONPs) with Eu(TTA)₃phen (ET-SIOPs) were successfully designed and shown to have luminescence and magnetic properties. The proposed synthetic method has three steps: (1) IONP synthesis, (2) SiO₂ layer coating (1st coating), and (3) Eu-SiO₂ layer coating (2nd coating). The morphology of the ET-SIOPs was well preserved after the 2nd coating was conducted. According to the photoluminescence (PL) spectra in the range of 500 to 700 nm, the Eu-incorporating SIOPs with Eu(TTA)₃phen (ET-SIOPs) exhibited the highest emission intensity compared to the Eu-incorporating SIOPs synthesized with other Eu precursors. Furthermore, the ET-SIOPs exhibited long-term luminescence stability of 6 months. In addition, this method of double-layer coating can be applied to other materials synthesized with different compositions and shapes, such as MnO and SiO₂ NPs. The findings of this study will not only provide new insights for the synthesis of luminescent-magnetic NPs with long-term luminescence stability and paramagnetic properties, but can also be applied for the design of various multifunctional NPs.

From Low to High Saturation Magnetization in Magnetite Nanoparticles: The Crucial Role of the Molar Ratios Between the Chemicals

In this study, a comprehensive characterization of iron oxide nanoparticles synthesized by using a simple one-pot thermal decomposition route is presented. In order to obtain monodisperse magnetite nanoparticles with high saturation magnetization, close to the bulk material, the molar ratios between the starting materials (solvents, reducing agents, and surfactants) were varied. Two out of nine conditions investigated in this study resulted in monodisperse iron oxide nanoparticles with high saturation magnetization (90 and 93% of bulk magnetite). The X-ray diffraction analyses along with the inspection of the lattice structure through transmission electron micrographs revealed that the main cause of the reduced magnetization in the other seven samples is likely due to the presence of distortion and microstrain in the particles. Although the thermogravimetric analysis, Raman and Fourier transform infrared spectroscopies confirmed the presence of covalently bonded oleic acid on the surface of all the samples, the particles with higher polydispersity and the lowest surface coating molecules showed the lowest saturation magnetization. Based on the observed results, it could be speculated that the changes in the kinetics of the reactions, induced by varying the molar ratio of the starting chemicals, can lead to the production of the particles with higher polydispersity and/or lattice deformation in their crystal structures. Finally, it was concluded that the experimental conditions for obtaining high-quality iron oxide nanoparticles, particularly the molar ratios and the heating profile, should not be chosen independently; for any specific molar ratio, there may exist a specific heating profile or vice versa. Because this synthetic consideration has rarely been reported in the literature, our results can give insights into the design of iron oxide nanoparticles with high saturation magnetization for different applications.

Star-shaped colloidal PbS nanocrystals: structural evolution and growth mechanism

Branched nanostructures have attracted considerable interest due to their large surface-to-volume ratio with benefits in photocatalysis and photovoltaic applications. Here we discuss the tailoring of branched structures with a shape of a star based on PbS semiconductor. It exposes the reaction mechanism and the controlling factors that template their morphology. For this purpose, we varied the primary lead precursors, types of surfactant, lead-to-surfactant molar ratio, temperature and duration of the reaction. Furthermore, intermediate products in a growth reaction were thoroughly examined using X-ray diffraction, transmission electron microscopy, Raman scattering, optical absorbance and Fourier transform infrared spectroscopy. The results designated a primary formation of truncated octahedral seeds with terminating {100} and {111} facets, followed by the selective fast growth of pods along the 〈100〉 directions toward the development of a star-like shape. The examined intermediates possess a cubic rock salt structure. The observations indicated that small surfactant molecules (e.g. acetate) evolve the branching process, while long-chain surfactants (e.g. oleate) stabilize the long pods as well as mitigate the aggregation process. This study conveys fundamental knowledge for the design of other branched structures, that are attractive for practical use in catalysis, electrochemistry and light-harvesting.

Tailoring of branched structures in the shape of stars based on PbS semiconductor, revealing the reaction mechanism and controlling factors that dictate their morphology and associated optical properties.

Target-Specific Superparamagnetic Hydrogel with Excellent pH Sensitivity and Reversibility: A Promising Platform for Biomedical Applications

Superparamagnetism has been widely used for many biomedical applications, such as early detection of inflammatory cancer and diabetes, magnetic resonance imaging (MRI), hyperthermia, etc., whereas incorporation of superparamagnetism in stimulus-responsive hydrogels has now gained substantial interest and attention for application in these fields. Recently, pH-responsive superparamagnetic hydrogels showing the potential use in disease diagnosis, biosensors, polymeric drug carriers, and implantable devices, have been developed based on the fact that pH is an important environmental factor in the body and some disease states manifest themselves by a change in the pH value. However, improvement in pH sensitivity of magnetic hydrogels is a dire need for their practical applications. In this study, we report the distinctly high pH sensitivity of new synthesized dual-responsive magnetic hydrogel nanocomposites, which was accomplished by copolymerization (free-radical polymerization) of two pH-sensitive monomers, acrylic acid (AA) and vinylsulfonic acid (VSA) with an optimum ratio, in the presence of presynthesized superparamagnetic iron oxide nanoparticles (Fe3O4(OH) x ). The monomers contain pH-sensitive functional groups (COO- and SO3 - for AA and VSA, respectively), and they have also been widely used as biomaterials because of the good biocompatibility. The pH sensitivity of the superparamagnetic hydrogel, poly(acrylic acid-co-vinylsulfonic acid), PAAVSA/Fe3O4, was investigated by swelling studies at different pH values from pH 7 to 1.4. Distinct pH reversibility of the system was also demonstrated through swelling/deswelling analysis. Thermal stability, chemical configuration, magnetic response, and structural properties of the system have been explored by suitable characterization techniques. Furthermore, the study reveals a pH-responsive significant change in the overall morphology and packing fraction of iron oxide nanoparticles in PAAVSA/Fe3O4 via energy-dispersive X-ray (EDX) elemental mapping with the field emission scanning electron microscopy (FESEM) study (for freeze-dried PAAVSA/Fe3O4, swelled at different pH values), implying a drastic change in susceptibility and induced saturation magnetization of the system. These important features could be easily utilized for the purpose of diagnosis using magnetic probe and/or impedance analysis techniques.

Raman spectroscopy to unravel the magnetic properties of iron oxide nanocrystals for bio-related applications

Iron oxide nanocrystals have become a versatile tool in biomedicine because of their low cytotoxicity while offering a wide range of tuneable magnetic properties that may be implemented in magnetic separation, drug and heat delivery and bioimaging. These capabilities rely on the unique magnetic features obtained when combining different iron oxide phases, so that an important portfolio of magnetic properties can be attained by the rational design of multicomponent nanocrystals. In this context, Raman spectroscopy is an invaluable and fast-performance tool to gain insight into the different phases forming part of the nanocrystals to be used, allowing correlation of the magnetic properties with the envisaged bio-related applications.

Emerging Anticancer Activity of Candidal Glucoseamine-6-Phosphate Synthase Inhibitors upon Nanoparticle-Mediated Delivery

Numerous glutamine analogues have been reported as irreversible inhibitors of the glucosamine-6-phosphate (GlcN-6-P) synthase in pathogenic Candida albicans in the last 3.5 decades. Among the reported inhibitors, the most effective N³-(4-methoxyfumaroyl)-l-2,3-diaminopropanoic acid (FMDP) has been extensively studied in order to develop its more active analogues. Several peptide-FMDP conjugates were tested to deliver FMDP to its subcellularly located GlcN-6-P synthase target. However, the rapid development of fungal resistance to FMDP-peptides required development of different therapeutic approaches to tackle antifungal resistance. In the current state of the global antifungal resistance, subcellular delivery of FMDP via free diffusion or endocytosis has become crucial. In this study, we report on in vitro nanomedical applications of FMDP and one of its ketoacid analogues, N³- trans-4-oxo-4-phenyl-2-butenoyl-l-2,3-diaminopropanoic acid (BADP). FMDP and BADP covalently attached to polyethylene glycol-coated iron oxide/silica core-shell nanoparticles are tested against intrinsically multidrug-resistant C. albicans. Three different human cancer cell lines potentially overexpressing the GlcN-6-P synthase enzyme are tested to demonstrate the immediate inhibitory effects of nanoparticle conjugates against mammalian cells. It is shown that nanoparticle-mediated delivery transforms FMDP and BADP into strong anticancer agents by inhibiting the growth of the tested cancer cells, whereas their anti-Candidal activity is decreased. This study discusses the emerging inhibitory effect of the FMDP/BADP-nanoparticle conjugates based on their cellular internalization efficiency and biocompatibility.

Dendrimer based theranostic nanostructures for combined chemo- and photothermal therapy of liver cancer cells in vitro

Here we report the synthesis of multifunctional nanocarriers based on PAMAM dendrimers generation (G) 4.0, 5.0 and 6.0 fixed to polydopamine (PDA) coated magnetite nanoparticles (Fe₃O₄). Synthesized nanoplatforms were characterized by transmission electron microscopy (TEM), the electrokinetic (zeta) potential, Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS) and magnetic resonance imaging (MRI). Further, we show as a proof of concept that nanocarriers functionalized with G 5.0 could be successfully applied in combined chemo- and photothermal therapy (CT-PTT) of the liver cancer cells. The cooperative effect of the modalities mentioned above led to higher mortality of cancer cells when compared to their individual performance. Moreover, the performed in vitro studies revealed that the application of dual therapy triggered the desired cell death mechanism-apoptosis. Furthermore, performed tests using Magnetic Resonance Imaging (MRI) showed that our materials have competitive contrast properties. Overall, the functionality of dendrimers has been extended by merging them with magnetic nanoparticles resulting in multifunctional hybrid nanostructures that are promising smart drug delivery system for cancer therapy.