Improving the Stability and Size Tunability of Cesium Lead Halide Perovskite Nanocrystals Using Trioctylphosphine Oxide as the Capping Ligand

Ultrafast Rejuvenation of Aged CsPbI3 Quantum Dots and Efficiency Improvement by Sequential 1-Dodecanethiol Post-Treatment Strategy

Metal halide perovskite CsPbI3 quantum dots (QDs) have sparked widespread research due to their intriguing optoelectronic. However, the CsPbI3 QDs undergo inevitable aging and luminescence quenching caused by the weak binding ability of oleate (OA-)/oleylammonium (OAm+), hindering further practical application. Herein, we have realized ultrafast rejuvenation of the aged CsPbI3 QDs that have lost their photoluminescence performance based on a 1-dodecanethiol (DDT) surface ligand to restore the outstanding red light emission with a high photoluminescence quantum yield (PLQY) from 25 to 90%. Furthermore, CsPbI3 QDs with DDT surface treatment maintain a cubic phase and high PLQY value even after 35 days. The DDT ligands can form a strong bond with Pb2+ and passivate I- ion vacancies, enhancing radiative recombination efficiency and thereby improving the PLQY of the QDs. The stable yet easily accessible surface of the DDT-capped CsPbI3 QDs was successfully employed as white LEDs and exhibited considerable enhanced luminous performance, suggesting promising application in solid-state lighting fields.

Aromatic 2,2-Diphenylethylamine Ligand Exchange of FA0.9Cs0.1PbBr3 Perovskite Nanocrystals for High-Efficiency Pure Green Light-Emitting Diodes

Perovskite nanocrystals (NCs) with long alkyl ligands cannot easily form high-quality composite films owing to their poor dispersibility in π-conjugated small molecules and polymer host materials. In this study, we demonstrated that the aromatic ligand exchange of mixed-cation FA0.9Cs0.1PbBr3 NCs using 2,2-diphenylethylamine (DPEA) can not only enable the fabrication of high-efficiency light-emitting diodes (LEDs) but also allows dispersibility in host materials. The DPEA-NC film exhibited a pure green wavelength of 530 nm and a full width at half-maximum of 20.9 nm with a photoluminescence quantum yield of 90.9%. A DPEA-NC LED achieved a luminance of 39,700 cd/m2 and an external quantum efficiency of 18.6% even in a thick NC film. Interestingly, the DPEA-NCs formed a composite film with small-molecule tris(4-carbazoyl-9-ylphenyl)amine. The operational stability of this composite LED was eight times higher than that of the DPEA-NC LED owing to enhanced hole-electron charge balance and the suppression of perovskite NC degradation. Therefore, the aromatic DPEA ligand exchange of perovskite NCs is an effective way to improve their electrical properties and operational device stabilities.

Mesoporous silica stabilized perovskite quantum dots for the preparation of ultra-stable green flexible film

CsPbBr3 perovskite quantum dots (QDs) have attracted much attention in the optical field because of their low band gap, wide absorption spectrum and high color purity. However, their poor stability in extreme environments such as water, light and heat severely limits their application in optical fields. Here, we prepared m-SiO2/CsPbBr3 composite luminescent material using an aqueous phase method combined with high temperature calcination. The material can retain 87% of the initial photoluminescence quantum efficiency after 60 days of storage under ambient conditions (humidity ∼80%; temperature ∼25 °C), its photoluminescence intensity only decreased by 33% after immersion in water for 90 min. This indicates that the material retains good stability under a high humidity environment. Finally, PMMA@m-SiO2/CsPbBr3 flexible films were prepared by aqueous solution polymerization. The flexible film has excellent green light emission properties and exhibits (0.092, 0.625) CIE coordinates.

Ligand Engineering of Inorganic Lead Halide Perovskite Quantum Dots toward High and Stable Photoluminescence

The ligand engineering of inorganic lead halide perovskite quantum dots (PQDs) is an indispensable strategy to boost their photoluminescence stability, which is pivotal for optoelectronics applications. CsPbX3 (X = Cl, Br, I) PQDs exhibit exceptional optical properties, including high color purity and tunable bandgaps. Despite their promising characteristics, environmental sensitivity poses a challenge to their stability. This article reviews the solution-based synthesis methods with ligand engineering. It introduces the impact of factors like humidity, temperature, and light exposure on PQD's instability, as well as in situ and post-synthesis ligand engineering strategies. The use of various ligands, including X- and L-type ligands, is reviewed for their effectiveness in enhancing stability and luminescence performance. Finally, the significant potential of ligand engineering for the broader application of PQDs in optoelectronic devices is also discussed.

Stability Strategies and Applications of Iodide Perovskites

Iodide perovskites have demonstrated their unprecedented high efficiency and commercialization potential, and their superior optoelectronic properties, such as high absorption coefficient, high carrier mobility, and narrow direct bandgap, have attracted much attention, especially in solar cells, photodetectors, and light-emitting diodes (LEDs). However, whether it is organic iodide perovskite, organic-inorganic hybrid iodide perovskite or all-inorganic iodide perovskite the stability of these iodide perovskites is still poor and the contamination is high. In recent years, scholars have studied more iodide perovskites to improve their stability as well as optoelectronic properties from various angles. This paper systematically reviews the strategies (component engineering, additive engineering, dimensionality reduction engineering, and phase mixing engineering) used to improve the stability of iodide perovskites and their applications in recent years.

Room temperature synthesis of nanocomposite thin films with embedded Cs2AgIn0.9Bi0.1Cl6 lead-free double perovskite nanocrystals with long-term water stability, wide range pH tolerance, and high quantum yield

The synthesis of Cs2AgIn0.9Bi0.1Cl6 nanocrystals was achieved at room temperature under ambient conditions using the ligand-assisted reprecipitation (LARP) method. The synthesized NCs exhibit bright orange emission when excited at 375 nm and have broad photoluminescence (PL) emission spectra with a maximum of 630 nm. A photoluminescence quantum yield (PLQY) of 36% was observed in these NCs without any polymer coatings. Polystyrene (PS), and poly (methyl methacrylate) (PMMA) were used to enhance the water stability and PLQY values up to 64%. Nanocomposite thin films with these polymer encapsulations exhibit good thermal stability up to at least 353 K and high quantum yields. PMMA-coated NCs showed long-term water stability for at least 4 months. The composites remain photostable when in contact with water for at least 120 min under continuous 365 nm UV illumination at 1 mW cm-2. Due to their excellent optical properties, aqueous stability, and wide range pH tolerance, these nanocomposite thin films could be employed for a variety of biological applications.

Bandgap-universal passivation enables stable perovskite solar cells with low photovoltage loss

The efficiency and longevity of metal-halide perovskite solar cells are typically dictated by nonradiative defect-mediated charge recombination. In this work, we demonstrate a vapor-based amino-silane passivation that reduces photovoltage deficits to around 100 millivolts (>90% of the thermodynamic limit) in perovskite solar cells of bandgaps between 1.6 and 1.8 electron volts, which is crucial for tandem applications. A primary-, secondary-, or tertiary-amino-silane alone negatively or barely affected perovskite crystallinity and charge transport, but amino-silanes that incorporate primary and secondary amines yield up to a 60-fold increase in photoluminescence quantum yield and preserve long-range conduction. Amino-silane-treated devices retained 95% power conversion efficiency for more than 1500 hours under full-spectrum sunlight at 85°C and open-circuit conditions in ambient air with a relative humidity of 50 to 60%.

Luminescent Perovskite-Cross-Linked Polymer with Low Shrinkage and Excellent Stability

When organic cross-linked polymers are combined with metal halide perovskite nanocrystals (PNCs) for realizing luminescent perovskite-polymer display materials, the stability of PNCs is enhanced and their shrinkage is suppressed. This work presents a feasible strategy for preparing CsPbBr3 nanocrystals (NCs) within a polydicyclopentadiene (PDCPD) thermosetting cross-linked resin matrix simultaneously via a one-step reaction. The obtained PDCPD@PNCs composite exhibits narrow peak half-widths (15-20 nm), high light transmittance (80%), low curing volume shrinkage (1.4%), tunable tensile properties, excellent stability, and a photoluminescence quantum yield (PLQY) of 44.3%. The composite material exhibits long-term stability in water, acid, and base solutions for over 90 days, with the PL intensity being maintained at over 90%. Furthermore, the composite is highly resistant to polar organic solvents owing to the insolubility imparted by cross-linking. White LEDs (WLED) fabricated using the as-prepared composite demonstrate excellent potential as light sources in optical devices.

Chemical Aspects of Halide Perovskite Nanocrystals

Halide perovskite nanocrystals (HPNCs) are currently among the most intensely investigated group of materials. Structurally related to the bulk halide perovskites (HPs), HPNCs are nanostructures with distinct chemical, optical, and electronic properties and significant practical potential. One of the keys to the effective exploitation of the HPNCs in advanced technologies is the development of controllable, reproducible, and scalable methods for preparation of materials with desired compositions, phases, and shapes and low defect content. Another important condition is a quantitative understanding of factors affecting the chemical stability and the optical and electronic properties of HPNCs. Here we review important recent developments in these areas. Following a brief historical prospective, we provide an overview of known chemical methods for preparation of HPNCs and approaches used to control their composition, phase, size, and shape. We then review studies of the relationship between the chemical composition and optical properties of HPNCs, degradation mechanisms, and effects of charge injection. Finally, we provide a short summary and an outlook. The aim of this review is not to provide a comprehensive summary of all relevant literature but rather a selection of highlights, which, in the subjective view of the authors, provide the most significant recent observations and relevant analyses.

Defects in lead halide perovskite light-emitting diodes under electric field: from behavior to passivation strategies

Lead halide perovskites (LHPs) are emerging semiconductor materials for light-emitting diodes (LEDs) owing to their unique structure and superior optoelectronic properties. However, defects that initiate degradation of LHPs through external stimuli and prompt internal ion migration at the interfaces remain a significant challenge. The electric field (EF), which is a fundamental driving force in LED operation, complicates the role of these defects in the physical and chemical properties of LHPs. A deeper understanding of EF-induced defect behavior is crucial for optimizing the LED performance. In this review, the origins and characterization of defects are explored, indicating the influence of EF-induced defect dynamics on LED performance and stability. A comprehensive overview of recent defect passivation approaches for LHP bulk films and nanocrystals (NCs) is also provided. Given the ubiquity of EF, a summary of the EF-induced defect behavior can enhance the performance of perovskite LEDs and related optoelectronic devices.

Direct in situ photolithography of ultra-stable CsPbBr3 quantum dot arrays based on crosslinking polymerization

CsPbX3 (X = Br, Cl, I) perovskite quantum dots (PQDs) are the rising star for various display applications owing to their excellent opto-electrical properties, such as an adjustable spectrum, narrow emission linewidth and high quantum yield. However, these PQDs are well known to suffer from intrinsic instability under atmospheric conditions. In this work, a novel photosensitive ligand, phenylbis(2,4,6-trimethylbenzoyl)phosphine oxide (XBPO), was employed as a dual-functional reagent for PQD surface engineering. The XBPO ligand could cleave to produce phenylphosphinyl radicals and trimethylbenzoyl radicals under UV light irradiation. The phenylphosphinyl radicals with PO bonds could effectively passivate the PQD surface defects, leading to quantum yield improvement. The CsPbBr3 and CsPbI3 PQDs with XBPO modification could achieve a photoluminescence quantum yield (PLQY) of near unity and 92%, respectively. Additionally, the in situ encapsulation of the PQDs was achieved by the subsequent crosslinking polymerization, which significantly improved the stability of the PQDs against solvents and the environment. By combining a standard photolithography procedure, we demonstrated a micro-pattern of CsPbBr3 PQDs. These results establish a universal route for PQD patterning, compatible with the existing photolithography processes, which could facilitate the application of PQDs in next-generation display technology.

Proton-Prompted Ligand Exchange to Achieve High-Efficiency CsPbI3 Quantum Dot Light-Emitting Diodes

CsPbI3 perovskite quantum dots (QDs) are ideal materials for the next generation of red light-emitting diodes. However, the low phase stability of CsPbI3 QDs and long-chain insulating capping ligands hinder the improvement of device performance. Traditional in-situ ligand replacement and ligand exchange after synthesis were often difficult to control. Here, we proposed a new ligand exchange strategy using a proton-prompted in-situ exchange of short 5-aminopentanoic acid ligands with long-chain oleic acid and oleylamine ligands to obtain stable small-size CsPbI3 QDs. This exchange strategy maintained the size and morphology of CsPbI3 QDs and improved the optical properties and the conductivity of CsPbI3 QDs films. As a result, high-efficiency red QD-based light-emitting diodes with an emission wavelength of 645 nm demonstrated a record maximum external quantum efficiency of 24.45% and an operational half-life of 10.79 h.

Mechanistic Insights into the Photoluminescence Enhancement in Surface Ligand Modified CsPbBr3 Perovskite Nanocrystals

We report a mechanistic study of the photoluminescence (PL) enhancement in CsPbBr3 perovskite nanocrystals (PNCs) induced by organic/inorganic hybrid ligand engineering. Compared to the as-synthesized oleic acid-oleylamine modified PNCs, the tributylphosphine oxide-CaBr2 modified PNCs can achieve a better passivation effect due to strong P═O-Pb coordination and Br-vacancy remedy, resulting in enhanced PL efficiency. We employ steady-state/time-resolved/temperature-dependent PL and fluence/polarization-dependent ultrafast transient absorption spectroscopy to obtain a mechanistic understanding of such an enhancement effect from both nonradiative and radiative perspectives. As for the dominating nonradiative recombination suppression, we quantitatively evaluate the contributions from channels of exciton dissociation and exciton trapping, which are connected to exciton binding energy and activation energy of exciton trapping to surface defect-induced trap states, respectively. We also look into the radiative recombination enhancement, which is likely due to the increase in electron-hole overlap of photogenerated excitons induced by slight Ca-doping. These mechanistic insights would be of guiding value for perovskite-based light-emitting applications.

Surface crafting and entrapment of CsPbBr3 perovskite QDs in ZIF-8 for ammonia recognition

The substantial optical features of perovskite quantum dots (PQD) lead to rapid growth in the investigation of their surface and lattice doping for optoelectronic and biochemical sensor advancements. Herein, we have used the surface ligand crafting model of PQD by ammonia and its optimum response to recognise ammonia in the sensing cellulose paper. The PQD with acetyl amine and octanoic acid capped were synthesized and entrapped in zeolites imidazole framework to delay the instant quenching and envisaged response to ammonia with high sensitivity. The hybrid perovskite quantum dots and Zeolite imidazolate framework-8 (PQD@ZIF-8) materials were further immersed in cellulose paper for solid-state sensor fabrication for the detection of ammonia by naked-eye and a Xiaomi Note-5 mobile camera. The ammonia was measured with high sensitivity at ambient conditions, with a detection limit of 16 ppm and a linear detection range of 1 to 500 ppm. This research provides a new platform for designing sensor selectivity and sensitivity, which could be used to further develop fluorescent nanomaterials-based sensors for small molecule detection.

Encapsulation of CsPb2Br5 in TiO2 Microcrystals to Enhance Environmental Stability

All-inorganic lead halide perovskite has emerged as an attractive semiconducting material due to its unique optoelectronic properties. However, its poor environmental stability restricts its broad application. Here, a simple method for the fabrication of CsPb2Br5/TiO2 is investigated. The introduction of p-aminobenzoic acid, which has two functional groups, is critical for the capping of amorphous TiO2 on CsPb2Br5. After calcination at 300 °C, amorphous TiO2 crystallizes into the anatase phase. The CsPb2Br5/TiO2 NCs show high long-term stability in water and enhanced stability against ultraviolet radiation and heat treatment, owing to the chemical stability of TiO2. More importantly, photo-electrochemical characterizations indicate that the formation of TiO2 shells can increase the charge separation efficiency. Hence, CsPb2Br5/TiO2 exhibits improved photoelectric activity owing to the electrical conductivity of the TiO2 in water. This study provides a new route for the fabrication of optoelectronic devices and photocatalysts based on perovskite NCs in the aqueous phase. Furthermore, the present results demonstrate that CsPb2Br5/TiO2 NCs has considerable potential to be used as a photoelectric material in optical sensing and monitoring.

Real-time observation of ion exchange dynamics during surface treatment of all-inorganic perovskite quantum dots with Zn-halogenide complexes for color tuning and enhanced quantum efficiency

All-inorganic lead perovskite quantum dots (QDs), due to their distinctive optical properties, have become one of the "hottest" topics in materials science; therefore, the development of new QD synthesis methods or their emission color adjustment is of great interest. Within this study, we present the simple preparation of QDs employing a novel ultrasound-induced hot-injection method, which significantly reduces the QD synthesis time from several hours to merely 15-20 minutes. Moreover, the post-synthesis treatment of perovskite QDs in solutions using zinc halogenide complexes could increase the QD emission intensity and, at the same time, boost their quantum efficiency. This behavior is due to the zinc halogenide complex's ability to remove or significantly reduce the number of surface electron traps in perovskite QDs. Finally, the experiment that shows the ability to instantly adjust the desired emission color of perovskite QDs by variation of the amount of added zinc halogenide complex is presented. The instantly obtained perovskite QD colors cover virtually the full range of the visible spectrum. The zinc halogenide modified perovskite QDs exhibit up to 10-15% higher QEs than those prepared by an individual synthesis.

Ligand-free template-assisted synthesis of stable perovskite nanocrystals with near-unity photoluminescence quantum yield within the pores of vaterite spheres

Ligand-free methods for the synthesis of halide perovskite nanocrystals are of great interest because of their excellent performance in optoelectronics and photonics. In addition, template-assisted synthesis methods have become a powerful tool for the fabrication of environmentally stable and bright nanocrystals. Here we develop a novel approach for the facile ligand-free template-assisted fabrication of perovskite nanocrystals with a near-unity absolute quantum yield, which involves CaCO₃ vaterite micro- and submicrospheres as templates. We show that the optical properties of the obtained nanocrystals are affected not mainly by the template morphology, but strongly depend on the concentration of precursor solutions, anion and cation ratio, as well as on adding defect-passivating rare-earth dopants. The optimized samples are further tested as infrared radiation visualizers exhibiting promising characteristics comparable to those that are commercially available.

Ligands in Lead Halide Perovskite Nanocrystals: From Synthesis to Optoelectronic Applications

Ligands are indispensable for perovskite nanocrystals (NCs) throughout the whole lifetime, as they not only play key roles in the controllable synthesis of NCs with different sizes and shapes, but also act as capping shell that affects optical properties and electrical coupling of NCs. Establishing a systematic understanding of the relationship between ligands and perovskite NCs is significant to enable many potential applications of NCs. This review mainly focuses on the influence of ligands on perovskite NCs. First of all, the ligands-dominated size and shape control of NCs is discussed. Whereafter, the surface defects of NCs and the bonding between ligands and perovskite NCs are classified, and corresponding post-treatment of surface defects via ligands is also summarized. Furthermore, advances in engineering the ligands towards the high performance of optoelectronic devices based on perovskite NCs, including photodetector, solar cell, light emitting diode (LED), and laser, and finally to potential challenges are also discussed.

Anionic ligand-induced chirality in perovskite nanoplatelets

Perovskite materials passivated by chiral ligands have recently shown unique chiroptical activity with promising optoelectronic applications. However, the ligands have been limited to chiral amines. Here, chiral phosphate molecules have been exploited to synthesize CsPbBr₃ nanoplatelets. The nanoplatelets showed a distinct circular dichroism signal and maintained their chiroptical properties after purification with anti-solvent.

Tiny spots to light the future: advances in synthesis, properties, and application of perovskite nanocrystals in solar cells

Perovskites are in the hotspot of material science and technology. Outstanding properties have been discovered, fundamental mechanisms of defect formation and degradation elucidated, and applications in a wide variety of optoelectronic devices demonstrated. Advances through adjusting the bulk-perovskite composition, as well as the integration of layered and nanostructured perovskites in the devices, allowed improvement in performance and stability. Recently, efforts have been devoted to investigating the effects of quantum confinement in perovskite nanocrystals (PNCs) aiming to fabricate optoelectronic devices based solely on these nanoparticles. In general, the applications are focused on light-emitting diodes, especially because of the high color purity and high fluorescence quantum yield obtained in PNCs. Likewise, they present important characteristics featured for photovoltaic applications, highlighting the possibility of stabilizing photoactive phases that are unstable in their bulk analog, the fine control of the bandgap through size change, low defect density, and compatibility with large-scale deposition techniques. Despite the progress made in the last years towards the improvement in the performance and stability of PNCs-based solar cells, their efficiency is still much lower than that obtained with bulk perovskite, and discussions about upscaling of this technology are scarce. In light of this, we address in this review recent routes towards efficiency improvement and the up-scaling of PNC solar cells, emphasizing synthesis management and strategies for solar cell fabrication.

Supermolecule-assisted synthesis of perovskite nanorods with high PLQY for standard blue emission

We fabricated CsPbBr₃ nanorods with standard blue emission (462 nm) and a high PLQY of ∼90% with the assistance of supermolecules. The β-CD works as a co-ligand and confine the isotropic growth of the nanocrystals to produce anisotropic nanorods. The strong coordination between β-CD and Pb favors the improvement of the PLQY and stability.

Practice of electron microscopy on nanoparticles sensitive to radiation damage: CsPbBr3 nanocrystals as a case study

In-depth and reliable characterization of advanced nanoparticles is crucial for revealing the origin of their unique features and for designing novel functional materials with tailored properties. Due to their small size, characterization beyond nanometric resolution, notably, by transmission electron microscopy (TEM) and associated techniques, is essential to provide meaningful information. Nevertheless, nanoparticles, especially those containing volatile elements or organic components, are sensitive to radiation damage. Here, using CsPbBr₃ perovskite nanocrystals as an example, strategies to preserve the native structure of radiation-sensitive nanocrystals in high-resolution electron microscopy studies are presented. Atomic-resolution images obtained using graphene support films allow for a clear comparison with simulation results, showing that most CsPbBr₃ nanocrystals are orthorhombic. Low-dose TEM reveals faceted nanocrystals with no in situ formed Pb crystallites, a feature observed in previous TEM studies that has been attributed to radiation damage. Cryo-electron microscopy further delays observable effects of radiation damage. Powder electron diffraction with a hybrid pixel direct electron detector confirms the domination of orthorhombic crystals. These results emphasize the importance of optimizing TEM grid preparation and of exploiting data collection strategies that impart minimum electron dose for revealing the true structure of radiation-sensitive nanocrystals.

Amine-Free Synthetic Route: An Emerging Approach to Making High-Quality Perovskite Nanocrystals for Futuristic Applications

In recent years, colloidal cesium lead halide (CsPbX₃) perovskite nanocrystals (PNCs) have attracted significant attention from researchers due to their unique optical properties and potential use in optoelectronic applications. In colloidal synthesis, oleic acid and oleylamine are commonly used as surface-capping ligands. Although oleylamine plays a crucial role in maintaining the colloidal stability and surface passivation of PNCs, its dynamic equilibrium with oleic acid leads to the formation of labile oleylammonium, which pulls halides from the surface of PNCs and thus degrades the crystals. In this Perspective, we summarize the various approaches for eliminating the amines to make high-quality, photostable, and amine-free CsPbX₃ PNCs. In addition, we look over the prospects of these PNCs regarding stability in different environmental conditions, photoluminescence properties, and optoelectronic device performance. This perspective will give a broad overview of amine-free PNCs starting from their synthesis, challenges, and optoelectronic properties to their future prospects.

Cesium Lead Iodide Perovskites: Optically Active Crystal Phase Stability to Surface Engineering

Among perovskites, the research on cesium lead iodides (CsPbI₃) has attracted a large research community, owing to their all-inorganic nature and promising solar cell performance. Typically, the CsPbI₃ solar cell devices are prepared at various heterojunctions, and working at fluctuating temperatures raises questions on the material stability-related performance of such devices. The fundamental studies reveal that their poor stability is due to a lower side deviation from Goldschmidt's tolerance factor, causing weak chemical interactions within the crystal lattice. In the case of organic-inorganic hybrid perovskites, where their stability is related to the inherent chemical nature of the organic cations, which cannot be manipulated to improve the stability drastically whereas the stability of CsPbI₃ is related to surface and lattice engineering. Thus, the challenges posed by CsPbI₃ could be overcome by engineering the surface and inside the CsPbI₃ crystal lattice. A few solutions have been proposed, including controlled crystal sizes, surface modifications, and lattice engineering. Various research groups have been working on these aspects and had accumulated a rich understanding of these materials. In this review, at first, we survey the fundamental aspects of CsPbI₃ polymorphs structure, highlighting the superiority of CsPbI₃ over other halide systems, stability, the factors (temperature, polarity, and size influence) leading to their phase transformations, and electronic band structure along with the important property of the defect tolerance nature. Fortunately, the factors stabilizing the most effective phases are achieved through a size reduction and the efficient surface passivation on the delicate CsPbI₃ nanocrystal surfaces. In the following section, we have provided the up-to-date surface passivating methods to suppress the non-radiative process for near-unity photoluminescence quantum yield, while maintaining their optically active phases, especially through molecular links (ligands, polymers, zwitterions, polymers) and inorganic halides. We have also provided recent advances to the efficient synthetic protocols for optically active CsPbI₃ NC phases to use readily for solar cell applications. The nanocrystal purification techniques are challenging and had a significant effect on the device performances. In part, we summarized the CsPbI₃-related solar cell device performances with respect to the device fabrication methods. At the end, we provide a brief outlook on the view of surface and lattice engineering in CsPbI₃ NCs for advancing the enhanced stability which is crucial for superior optical and light applications.

Enhancing the Intrinsic and Extrinsic Stability of Halide Perovskite Nanocrystals for Efficient and Durable Optoelectronics

Over the past few years, metal halide perovskite nanocrystals have been at the forefront of colloidal semiconductor nanomaterial research because of their fascinating properties and potential applications. However, their intrinsic phase instability and chemical degradation under external exposures (high temperature, water, oxygen, and light) are currently limiting the real-world applications of perovskite optoelectronics. To overcome these stability issues, researchers have reported various strategies such as doping and encapsulation. The doping improves the optical and photoactive phase stability, whereas the encapsulation protects the perovskite NCs from external exposures. This perspective discusses the rationale of various strategies to enhance the stability of perovskite NCs and suggests possible future directions for the fabrication of optoelectronic devices with long-term stability while maintaining high efficiency.

Amplified Spontaneous Emission from Thermally Evaporated High-Quality Thin Films of CsPb(Br1-xYx)3 (Y = I, Cl) Perovskites

As a wavelength-tunable lasing material, perovskites are now generating a lot of scientific attention. Conventional solution-processed CsPbX₃ perovskite films sometimes suffer unavoidable pinhole defects and poor surface morphology, severely limiting their performance on amplified spontaneous emission (ASE) and lasing application. Herein, a thermal evaporation approach is explored in our work to achieve a uniform and high-coverage CsPb(Br_1-xY_x)₃ (Y = I, Cl) perovskites polycrystalline thin film. The ASE of these films was studied using a picosecond laser system. The ASE profile increases rapidly over the narrow peak in relation to the laser pump intensity, confirming the development of stimulated emission. ASE began when the energy density threshold was reached and ranged between 25 and 170 μJ/cm² per pulse for perovskite materials when replacing I with Br and then Cl. This work emphasizes the notable optical properties of high-quality perovskite thin films, leading to possible accessible uses in optoelectronic applications.

Luminescent Thin Films Enabled by CsPbX3 (X=Cl, Br, I) Precursor Solution

Inorganic cesium lead halide perovskite nanocrystals are candidates for lighting and display materials due to their outstanding optoelectronic properties. However, the dissolution issue of perovskite nanocrystals in polar solvents remains a challenge for practical applications. Herein, we present a newly designed one-step spin-coating strategy to prepare a novel multicolor-tunable CsPbX₃ (X=Cl, Br, I) nanocrystal film, where the CsPbX₃ precursor solution was formed by dissolving PbO, Cs₂ CO₃ , and CH₃ NH₃ X into the ionic liquid n-butylammonium butyrate. The as-designed CsPbX₃ nanocrystal films show high color purity with a narrow emission width. Also, the blue CsPb(Cl/Br)₃ film demonstrates an absolute photoluminescence quantum yields (PLQY) of 15.6 %, which is higher than 11.7 % of green CsPbBr₃ and 8.3 % of red CsPb(Br/I)₃ film. This study develops an effective approach to preparing CsPbX₃ nanocrystal thin films, opening a new avenue to design perovskite nanocrystals-based devices for lighting and display applications.

Enhanced Thermal Stability of Planar Perovskite Solar Cells Through Triphenylphosphine Interface Passivation

While extensive research has driven the rapid efficiency trajectory noted to date for organic-inorganic perovskite solar cells (PSCs), their thermal stability remains one of the key issues hindering their commercialization. Herein, a significant reduction in surface defects (a precursor to perovskite instability) could be attained by introducing triphenylphosphine (TPP), an effective Lewis base passivator, to the vulnerable perovskite/spiro-OMeTAD interface. Not only did TPP passivation enable a high power conversion efficiency (PCE) of 20.22 % to be achieved, these devices also exhibited superior ambient and thermal stability. Unlike the pristine device, which exhibited a sharp descend to 16 % of its initial PCE on storing in relative humidity of 10 %, at 85 °C for more than 720 h, the TPP-passivated devices retained 71 % of its initial PCE. Hence, this study presents a facile yet excellent approach to attain high-performing yet thermally stable PSCs.

Organic building blocks at inorganic nanomaterial interfaces

This tutorial review presents our perspective on designing organic molecules for the functionalization of inorganic nanomaterial surfaces, through the model of an "anchor-functionality" paradigm. This "anchor-functionality" paradigm is a streamlined design strategy developed from a comprehensive range of materials (e.g., lead halide perovskites, II-VI semiconductors, III-V semiconductors, metal oxides, diamonds, carbon dots, silicon, etc.) and applications (e.g., light-emitting diodes, photovoltaics, lasers, photonic cavities, photocatalysis, fluorescence imaging, photo dynamic therapy, drug delivery, etc.). The structure of this organic interface modifier comprises two key components: anchor groups binding to inorganic surfaces and functional groups that optimize their performance in specific applications. To help readers better understand and utilize this approach, the roles of different anchor groups and different functional groups are discussed and explained through their interactions with inorganic materials and external environments.

The metal doping strategy in all inorganic lead halide perovskites: synthesis, physicochemical properties, and optoelectronic applications

All inorganic perovskites CsPbX₃ (X = Cl, Br, I), rising stars of optical materials, have shown promising application prospects in optoelectronic and photovoltaic fields. However, some open issues still exist in these perovskites, like poor long-term stability, inevitable intrinsic defects and much nonradiative recombination, which greatly weakens their optical capability and seriously hinders their further development. The metal doping strategy, through the partial substitution of foreign ions for native ions, has gradually become an effective method for significantly enhancing the comprehensive properties of CsPbX₃. Whereas some previous studies have reported the impressive properties of metal-doped CsPbX₃, there is still a lack of a comprehensive review on the influences of metal doping on CsPbX₃. In this review, we aim to provide a systematic review of the latest achievements in metal-doped CsPbX₃, which focuses on their synthetic methods and the positive effects of metal doping on structure, optical properties, morphology control, carrier behavior and related optoelectronic and photovoltaic devices. Finally, we put forward a few opportunities and challenges about the further investigation of metal-doped perovskites, which may help researchers explore new research directions.

Enhancement of photoluminescence and the stability of CsPbX3 (X = Cl, Br, and I) perovskite nanocrystals with phthalimide passivation

Cesium lead halide perovskite nanocrystals (CsPbX₃ NCs) have been the flourishing area of research in the field of photovoltaic and optoelectronic applications because of their excellent optical and electronic properties. However, they suffer from low stability and deterioration of photoluminescence (PL) properties post-synthesis. In this work, we demonstrate that incorporating an additional ligand can further enhance the optical properties and stability of NCs. Here, we introduced phthalimide as a new surface passivation ligand into the oleic acid/oleylamine system in situ to get near-unity photoluminescence quantum yield (PLQY) of CsPbBr₃ and CsPbI₃ perovskite NCs. Phthalimide passivation dramatically improves the stability of CsPbCl₃, CsPbBr₃, and CsPbI₃ NCs under ambient light and UV light. The PL intensity was recorded for one year, which showed a dramatic improvement for CsPbBr₃ NCs. Nearly 11% of PL can be retained even after one year with phthalimide passivation. CsPbCl₃ NCs exhibit 3 times higher PL with phthalimide and retain 12% PL intensity even after two months, while PL of as-synthesized NCs completely diminishes. Under continuous UV light illumination, the PL intensity of phthalimide passivated NCs is well preserved, while the as-synthesized NCs exhibit negligible PL emission in 2 days. About 40% and 25% of initial PL is preserved for CsPbBr₃ and CsPbCl₃ NCs in the presence of phthalimide. CsPbI₃ NCs with phthalimide exhibit PL even after 2 days, while PL for as-synthesized NCs rapidly declined in the first 10 h. The presence of phthalimide in CsPbI₃ NCs could maintain stability even after a week, while the as-synthesized NCs underwent a transition to the non-luminescent phase within 4 days. Furthermore, blue, green, yellow, and red-emitting diodes using CsPbCl_1.5Br_1.5, CsPbBr₃, CsPbBr_1.5I_1.5, CsPbI₃ NCs, respectively, are fabricated by drop-casting NCs onto blue LED lights, which show great potential in the field of display and lighting technologies.

Bromopropane as a novel bromine precursor for the completely amine free colloidal synthesis of ultrastable and highly luminescent green-emitting cesium lead bromide (CsPbBr3) perovskite nanocrystals

Recently, lead halide perovskite nanocrystals (PNCs) have attracted intense interest as promising active materials for optoelectronic devices. However, their extensive applications are still hampered by poor stability under ambient conditions. Oleic acid and oleylamine are the most commonly used ligands in colloidal CsPbX₃ (X = Cl, Br, and I) synthesis. Oleylamine plays a dual role as it stabilizes the surface but in the long run or post-synthesis, it may disturb the colloidal stability due to facile proton exchange leading to the formation of labile oleylammonium halide, which detaches the halide ions from the NC surface. To address these issues, herein, we report an open-atmospheric, facile, efficient, and completely amine-free synthesis of cesium lead bromide perovskite nanocrystals using a novel bromine precursor, bromopropane, which is inexpensive and available at hand. The reaction mechanism follows a trioctylphosphine/oleic acid-mediated surface passivation route that provides an amine-free reaction environment to stabilize ligand capping on the NC surface. Uniform, highly monodisperse NCs of size ∼29 nm were obtained. The as-synthesized NCs have a high photoluminescence quantum yield (PLQY) of around 80%, and especially, exhibited strong stability under ambient conditions and continuous UV irradiation. The PLQY can maintain 83% of the initial one even after 120 days. Furthermore, after 96 h of continuous irradiation under UV light at 365 nm (8 W cm^-2) under open ambient conditions, the photoluminescence (PL) intensity showed retention of 68% of its original value with no significant changes in the full width at half-maximum, whereas the amine-based sample retains only 5% of its original PL intensity. Furthermore, we have utilized these NCs to fabricate stable down-converted LED devices. The present work demonstrated the synthesis of ultra-stable CsPbBr₃ NCs that can be an ideal candidate for display applications.

State of the Art and Prospects for Halide Perovskite Nanocrystals

Metal-halide perovskites have rapidly emerged as one of the most promising materials of the 21st century, with many exciting properties and great potential for a broad range of applications, from photovoltaics to optoelectronics and photocatalysis. The ease with which metal-halide perovskites can be synthesized in the form of brightly luminescent colloidal nanocrystals, as well as their tunable and intriguing optical and electronic properties, has attracted researchers from different disciplines of science and technology. In the last few years, there has been a significant progress in the shape-controlled synthesis of perovskite nanocrystals and understanding of their properties and applications. In this comprehensive review, researchers having expertise in different fields (chemistry, physics, and device engineering) of metal-halide perovskite nanocrystals have joined together to provide a state of the art overview and future prospects of metal-halide perovskite nanocrystal research.

Recent Advances in Ligand Design and Engineering in Lead Halide Perovskite Nanocrystals

Lead halide perovskite (LHP) nanocrystals (NCs) have recently garnered enhanced development efforts from research disciplines owing to their superior optical and optoelectronic properties. These materials, however, are unlike conventional quantum dots, because they possess strong ionic character, labile ligand coverage, and overall stability issues. As a result, the system as a whole is highly dynamic and can be affected by slight changes of particle surface environment. Specifically, the surface ligand shell of LHP NCs has proven to play imperative roles throughout the lifetime of a LHP NC. Recent advances in engineering and understanding the roles of surface ligand shells from initial synthesis, through postsynthetic processing and device integration, finally to application performances of colloidal LHP NCs are covered here.

Trioctylphosphine-Assisted Pre-protection Low-Temperature Solvothermal Synthesis of Highly Stable CsPbBr3/TiO2 Nanocomposites

Lead halide perovskite quantum dots (PQDs) are reported as a promising branch of perovskites, which have recently emerged as a field in luminescent materials research. However, before the practical applications of PQDs can be realized, the problem of poor stability has not yet been solved. Herein, we propose a trioctylphosphine (TOP)-assisted pre-protection low-temperature solvothermal synthesis of highly stable CsPbBr₃/TiO₂ nanocomposites. Due to the protection of branched ligands and the lower temperature of shell formation, these TOP-modified CsPbBr₃ PQDs are successfully incorporated into a TiO₂ monolith without a loss of fluorescence intensity. Because the excellent nature of both parent materials is preserved in CsPbBr₃/TiO₂ nanocomposites, it is found that the as-prepared CsPbBr₃/TiO₂ nanocomposites not only display excellent photocatalytic activity but also yield improved PL stability, enabling us to build highly stable white light-emitting diodes and to photodegrade rhodamine B.

Synthesis of Red Cesium Lead Bromoiodide Nanocrystals Chelating Phenylated Phosphine Ligands with Enhanced Stability

Two new phosphine ligands, diphenylmethylphosphine (DPMP) and triphenylphosphine (TPP), were introduced onto cesium lead bromoiodide nanocrystals (CsPbBrI₂ NCs) to improve air stability in the ambient atmosphere. Incorporating DPMP or TPP ligands can also enhance film-forming and optoelectronic properties of the CsPbBrI₂ NCs. The results reveal that DPMP is a better ligand to stabilize the emission of CsPbBrI₂ NCs than TPP after storage for 21 days. The increased carrier lifetime and photoluminescence quantum yield (PLQY) of perovskite NCs are due to the surface passivation by DPMP or TPP ligands, which reduces nonradiative recombination at the trap sites. The DPMP and TPP-treated CsPbBrI₂ NCs were successfully utilized as red emitters for fabricating perovskite light-emitting diodes with enhanced performance and prolonged device lifetime relative to the pristine one.

Completely Amine-Free Open-Atmospheric Synthesis of High-Quality Cesium Lead Bromide (CsPbBr3 ) Perovskite Nanocrystals

Cesium lead halide perovskite nanocrystals (NCs) CsPbX₃ (X=Cl, Br, and I) have been prominent materials in the last few years due to their high photoluminescence quantum yield (PLQY) for light-emitting diodes and other significant applications in photovoltaics and optoelectronics. In colloidal CsPbX₃ synthesis, the most commonly used ligands are oleic acid and oleylamine. The latter plays an important role in surface passivation but may also be responsible for poor colloidal stability as a result of facile proton exchange leading to the formation of labile oleylammonium halide, which pulls halide ions out of the NC surface. Herein, a facile, efficient, completely amine-free synthesis of cesium lead bromide perovskite nanocrystals using hydrobromic acid as halide source and tri-n-octylphosphane as ligand under open-atmospheric conditions is demonstrated. Hydrobromic acid serves as labile source of bromide ion, and thus this three-precursor approach (separate precursors for Cs, Pb, Br) gives more control than a conventional single-source precursor for Pb and Br (PbBr₂ ). The use of HBr paved the way to eliminate oleylamine, and thus the formation of labile oleylammonium halide can be completely excluded. Various Cs:Pb:Br molar ratios were studied and optimum conditions for making very stable CsPbBr₃ NCs with high PLQY were found. These completely amine-free CsPbBr₃ perovskite NCs synthesized under bromine-rich conditions exhibit good stability and durability for more than three months in the form of colloidal solutions and films, respectively. Furthermore, stable tunable emission across a wide spectral range through anion exchange was demonstrated. More importantly, this work reports open-atmosphere-stable CsPbBr₃ NCs films exhibiting strong PL, which can be further used for optoelectronic device applications.

Red Light-Emitting Diodes with All-Inorganic CsPbI3/TOPO Composite Nanowires Color Conversion Films

This work presents a method for obtaining a color-converted red light source through a combination of a blue GaN light-emitting diode and a red fluorescent color conversion film of a perovskite CsPbI3/TOPO composite. High-quality CsPbI3 quantum dots (QDs) were prepared using the hot-injection method. The colloidal QD solutions were mixed with different ratios of trioctylphosphine oxide (TOPO) to form nanowires. The color conversion films prepared by the mixed ultraviolet resin and colloidal solutions were coated on blue LEDs. The optical and electrical properties of the devices were measured and analyzed at an injection current of 50 mA; it was observed that the strongest red light intensity was 93.1 cd/m2 and the external quantum efficiency was 5.7% at a wavelength of approximately 708 nm when CsPbI3/TOPO was 1:0.35.

Highly efficient ligand-modified manganese ion doped CsPbCl3 perovskite quantum dots for photon energy conversion in silicon solar cells

Manganese ion doped CsPbX₃ perovskite quantum dots (QDs) demonstrate high absorption of ultraviolet (UV) light and efficient orange emission with a large Stokes shift, and are almost transparent to visible light, which are ideal photon energy converters for solar cells. In this work, Mn²⁺ ion doped CsPbCl₃ QDs were synthesized by incorporating a long-chain ammonium ligand dodecyl dimethylammonium chloride (DDAC), in which the DDAC ligand not only played the role of replacing the surface ligands of QDs, but also enhanced the efficiency and stability of Mn²⁺ ion doped QDs. The as-prepared QD sample displayed a photoluminescence quantum yield (PLQY) as high as 91% and served as a photon energy converter for silicon solar cells (SSCs). The photoelectric conversion efficiency (PCE) of SSCs increased from 19.64% to 20.65% with a relative enhancement of 5.14%. This work displays a method to tune the efficiency of QDs by modifying the surface ligands and an efficient photon energy converter for SSCs, which is of great importance for practical applications.

Interface Matters: Enhanced Photoluminescence and Long-Term Stability of Zero-Dimensional Cesium Lead Bromide Nanocrystals via Gas-Phase Aluminum Oxide Encapsulation

Cesium lead halide perovskite nanocrystals (PNCs), while possessing facile chemical synthesis routes and high photoluminescence (PL) properties, are still challenged by issues of instability and degradation. Although atomic layer deposition (ALD) of metal oxides has been one of the common encapsulation approaches for longer term stability, its application inevitably resulted in severe loss of emission efficiency and at times partial loss of structural integrity of perovskites, creating a bottleneck in its practical viability. We demonstrate a nondestructive modified gas-phase technique with codeposition of both precursors trimethylaluminum and water to dramatically enhance the PL emission in zero-dimensional (0D) Cs₄PbBr₆ PNCs via alumina encapsulation. X-ray photoelectron spectroscopy analysis of Cs₄PbBr₆ films reveals the alumina deposition to be accompanied by elemental composition changes, particularly by the reduction of the excessive cesium content. Ab initio density functional theory simulations further unfold that the presence of excess Cs on the surface of PNCs leads to decomposition of structural [PbBr₆]^4- octahedra in the 0D perovskite lattice, which can be prevented in the presence of added hydroxyl groups. Our study thus unveils the pivotal role of the PNC surface composition and treatment in the process of its interaction with metal oxide precursors to control the PL properties as well as the stability of PNCs, providing an unprecedented way to use the conventional ALD technique for their successful integration into optoelectronic and photonic devices with improved properties.

Improving the Quality and Luminescence Performance of All-Inorganic Perovskite Nanomaterials for Light-Emitting Devices by Surface Engineering

Lead halide perovskites and their applications in the optoelectronic field have garnered intensive interest over the years. Inorganic perovskites (IHP), though a novel class of material, are considered as one of the most promising optoelectronic materials. These materials are widely used in detectors, solar cells, and other devices, owing to their excellent charge-transport properties, high defect tolerance, composition- and size-dependent luminescence, narrow emission, and high photoluminescence quantum yield. In recent years, numerous encouraging achievements have been realized, especially in the research of CsPbX₃ (X = Cl, Br, I) nanocrystals (NCs) and surface engineering. Therefore, it is necessary to summarize the principles and effects of these surface engineering optimization methods. It is also important to scientifically guide the applications and promote the development of perovskites more efficiently. Herein, the principles of surface ligands are reviewed, and various surface treatment methods used in CsPbX₃ NCs as well as quantum-dot light-emitting diodes are presented. Finally, a brief outlook on CsPbX₃ NC surface engineering is offered, illustrating the present challenges and the direction in which future investigations are intended to obtain high-quality CsPbX₃ NCs that can be utilized in more applications.

Eco-Friendly Strategy To Improve Durability and Stability of Zwitterionic Capping Ligand Colloidal CsPbBr3 Nanocrystals

Long-chain zwitterionic ligands have been demonstrated to greatly improve the chemical durability of colloidal CsPbBr₃ nanocrystals (NCs) by the chelate effect. However, Br sources are toxic, and the reaction is so dynamic that it is hard to control the size of the crystal. We propose an eco-friendly strategy to improve the chemical durability of colloidal CsPbBr₃ NCs. Nontoxic, inexpensive, and directly available benzoyl bromine was used as the Br source, and tri-n-octylphosphine oxide was used as the adjuvant to control the reaction kinetics. Uniform, monodispersed NCs with a size of ∼11 nm were obtained. They had high photoluminescence quantum yields (PLQYs) of above 95% and, especially, showed strong stability against attack by polar solvents. The PLQY remained 80% even after 12 cycles of purification. Furthermore, after 24 h of continuous radiation by 405 nm laser, the photoluminescence (PL) intensity showed negligible decrease, and the wavelength and full width at half-maximum of PL had no significant change.

Synthesis and dimensional control of CsPbBr3 perovskite nanocrystals using phosphorous based ligands

Nanocrystals of the inorganic perovskite, CsPbBr₃, display outstanding photo-physical properties, making them ideal for next generation optical devices. However, the typical combination of oleic acid and oleylamine ligands employed in their synthesis is easily displaced, leading to poor stability that can hinder their applicability. In this work, we look toward the replacement of the oleic acid and amine with phosphorous-based ligands. We synthesize CsPbBr₃ nanocrystals using an oleylamine/alkylphosphonic acid combination with near perfect monodispersity with the ability to tune the bandgap by varying the alkyl chain length. We further investigate the replacement of the oleylamine giving a ligand combination of alkylphosphonic acid/trioctylphosphine oxide for perovskite nanocrystal nucleation and growth. This combination is typical for the widely studied metal chalcogenide synthesis and in our study with CsPbBr₃ yields a pure phase perovskite.

Ionic liquid assisted preparation and modulation of the photoluminescence kinetics for highly efficient CsPbX3 nanocrystals with improved stability

CsPbX₃ (X = Cl, Br, I) nanocrystals (NCs) are competitive fluorescent materials for lighting and displays owing to their excellent photophysical properties. However, the stability and optoelectronic performance of the perovskite NCs are severely limited by the highly dynamic binding feature of the present ligand strategy. Herein, a facile approach was employed to synthesize CsPbBr₃ NCs with the assistance of the ionic liquid (IL) 1-butyl-3-methylimidazolium bromide ([Bmim]Br). By strictly controlling the addition dose of [Bmim]Br (n_IL/n_Pb = 0.125) into the reaction precursor, it is possible to obtain the desired cube-shaped and monodisperse CsPbBr₃ NCs with simultaneous enhancement of the storage and irradiation stability as well as photoluminescence quantum yields (PLQYs, ∼91%). Stability tests show that the emission intensity of the parent CsPbBr₃ NCs drops to 50% of its initial emission intensity after storage under an open atmosphere for 91 days, while the sample prepared with the assistance of [Bmim]Br can maintain 82% of the PL intensity. Meanwhile, the modified CsPbBr₃ NCs also present superior photo-stability, and still maintain 81% of the original PL intensity after continuous illumination under an ultraviolet lamp for 24 h, but the intensity of the parent CsPbBr₃ NCs reduces to 35% of the original intensity. Through the morphology, composition, and luminescence kinetics evolution of CsPbBr₃ NCs, these benefits were attributed to the modulation by [Bmim]Br, which could effectively provide Br ions for the formation and growth of NCs, resulting in the reduction of surface traps. Moreover, [Bmim]Br exhibited strong interactions with NCs, and the deprotonation of oleic acid (OA) was inhibited, resulting in the effective passivation of surface defects. Finally, CsPbX₃ NCs with different compositions were obtained via a facile anion exchange reaction, leading to the tunable emission in the range of 462-665 nm and a wide colour gamut (129.65% NTSC standard). This work opens a new avenue for modulating the surface properties of CsPbX₃ NCs, which will create opportunities for their application in the photoelectric field.