Tuning Anatase Surface Reactivity toward Carboxylic Acid Anchor Groups

Adsorption-Controlled Wettability and Self-Cleaning of TiO2

Molecular adsorption on solids is inevitable and has significant influences on the wettability of materials, while the tuning mechanism of the wettability from molecular adsorption is yet to be understood. Using molecular dynamics (MD) simulations, we comprehensively studied the relation between the wettability of the TiO₂ surface and the adsorption of water and carboxylic acid molecules. Our results reveal that the increasing amount of surface hydroxyl groups from the decomposition adsorption of H₂O increases the hydrophilicity of TiO₂, providing molecular-level evidence for the previously proposed mechanism of photo-induced hydrophilicity. By contrast, the surface wettability becomes tunable with water contact angles changing from 0 to ∼130° through length adjustment of the adsorbed carboxylic acids. The TiO₂ surface is hydrophilic with the adsorption of short-alkyl-chain carboxylic acids (e.g., HCOOH) and becomes hydrophobic when longer-alkyl-chain carboxylic acids (H(CH₂)_nCOOH, n > 2) are present. Furthermore, long-alkyl-chain acids also increase surface oleophilicity, while the adsorption of HCOOH and CH₃COOH significantly enhances the oleophobicity of TiO₂. Water molecules can also more easily penetrate the space between oily contaminants and adsorbed short acid molecules, thereby further increasing its self-cleaning capacity. The present simulations not only reveal the mechanism of wettability caused by molecular adsorption but also provide a promising method to create materials with controllable wettability and high self-cleaning efficiency.

Dual keratinocyte-attachment and anti-inflammatory coatings for soft tissue sealing around transmucosal oral implants

Unlike the attachment of soft epithelial skin tissue to penetrating solid natural structures like fingernails and teeth, sealing around percutaneous/permucosal devices such as dental implants is hindered by inflammation and epidermal down growth. Here, we employed a dual keratinocyte-adhesive peptide and anti-inflammatory biomolecule coating on titanium to promote oral epithelial tissue attachment. For minimizing inflammation-triggered epidermal down growth, we coated pristine and oxygen plasma pre-treated polished titanium (pTi) with conjugated linoleic acid (CLA). Further, in order to aid in soft tissue attachment via the formation of hemidesmosomes, adhesive structures by oral keratinocytes, we coated the anionic linoleic acid (LA) adsorbed titanium with cationic cell adhesive peptides (CAP), LamLG3, a peptide derived from Laminin 332, the major extracellular matrix component of the basement membrane in skin tissue and Net1, derived from Netrin-1, a neural chemoattractant capable of epithelial cell attachment via α6β4 integrins. The dual CLA-CAP coatings on pTi were characterized by X-ray photoelectron spectroscopy and dynamic water contact angle measurements. The proliferation of human oral keratinocytes (TERT-2/OKF6) was accelerated on the peptide coated titanium while also promoting the expression of Col XVII and β-4 integrin, two markers for hemidesmosomes. Simultaneously, CLA coating suppressed the production of inducible nitric oxide synthase (anti-iNOS); a pro-inflammatory M1 marker expressed in lipopolysaccharide (LPS) stimulated murine macrophages (RAW 264.7) and elevated expression of anti-CD206, associated to an anti-inflammatory M2 macrophage phenotype. Taken together, the dual keratinocyte-adhesive peptide and anti-inflammatory biomolecule coating on titanium can help reduce inflammation and promote permucosal/peri-implant soft tissue sealing.

UV/Ozone-Assisted Rapid Formation of High-Quality Tribological Self-Assembled Monolayer

UV/ozone (UVO)-assisted formation of self-assembled monolayer (SAM) of 1H,1H,2H,2H-perfluorodecyltriethoxysilane (PFDS) was prepared on a glass surface. The effect of UVO exposure time on surface roughness and hydrophilicity was investigated through goniometer and atomic force microscope (AFM), and deposition time-dependent SAM quality was detected by AFM and X-ray photoelectron spectroscopy (XPS). The glass surface became smooth with UVO radiation after 10 min, and the hydrophilicity was also improved after the treatment. Confirmed by surface topography detection and chemical composition analysis, a high-quality SAM can be formed rapidly on glass with 10 min UVO treatment followed by 2 h deposition in PFDS solution. Excellent tribological performances of SAM coated with UVO treatment glass were demonstrated by friction and wear tests on AFM compared to film-deposited glass without UVO treatment and original glass. The study sheds a light on preparing high-quality lubrication and antiwear self-assembled films on the surface of engineering materials.

Molecular anchoring to oxide surfaces in ultrahigh vacuum and in aqueous electrolytes: phosphonic acids on atomically-defined cobalt oxide

In this work, we investigated the interaction of phenylphosphonic acid (PPA, C₆H₅PO₃H₂) with atomically-defined Co₃O₄(111) thin films, grown on Ir(100), under ultrahigh vacuum (UHV) conditions and in the electrochemical environment. In the first step, we employed infrared reflection absorption spectroscopy (IRAS) and followed the formation of a saturated monolayer (380 K) in UHV. We observed that the binding motif changes from a chelating tridentate in the sub-monolayer regime to a chelating bidentate at full monolayer coverages. In the electrochemical environment, we analyzed the interaction of PPA with the same Co₃O₄(111) surface by electrochemical infrared reflection absorption spectroscopy (EC-IRRAS) (0.3 V_RHE-1.3 V_RHE). When adsorbed at pH 10 from an ammonia buffered aqueous solution, PPA binds to the surface in form of a fully deprotonated chelating bidentate. With increasing electrode potential, we observed two fully reversible processes. At low buffer concentration, protons are released upon oxidation of surface Co²⁺ ions and lead to protonation of the anchored phosphonates. At high buffer concentration, most of the protons released are accepted by NH₃. Simultaneously, the surface phosphonate changes its adsorption motif from bidentate to tridentate while adopting a more upright geometry.

Stabilization of dry protein coatings with compatible solutes

Exposure of protein modified surfaces to air may be necessary in several applications. For example, air contact may be inevitable during the implantation of biomedical devices, for analysis of protein modified surfaces, or for sensor applications. Protein coatings are very sensitive to dehydration and can undergo significant and irreversible alterations of their conformations upon exposure to air. With the use of two compatible solutes from extremophilic bacteria, ectoine and hydroxyectoine, the authors were able to preserve the activity of dried protein monolayers for up to >24 h. The protective effect can be explained by the preferred exclusion model; i.e., the solutes trap a thin water layer around the protein, retaining an aqueous environment and preventing unfolding of the protein. Horseradish peroxidase (HRP) immobilized on compact TiO₂ was used as a model system. Structural differences between the compatible solute stabilized and unstabilized protein films, and between different solutes, were analyzed by static time-of-flight secondary ion mass spectrometry (ToF-SIMS). The biological activity difference observed in a colorimetric activity assay was correlated to changes in protein conformation by application of principal component analysis to the static ToF-SIMS data. Additionally, rehydration of the denatured HRP was observed in ToF-SIMS with an exposure of denatured protein coatings to ectoine and hydroxyectoine solutions.

Metal-Phosphate Bilayers for Anatase Surface Modification

Compared to many other metal oxides, anatase TiO₂ shows relatively lower reactivity toward carboxylic acid anchor groups. The latter is crucial for applications, for example, in dye-sensitized solar cells (DSSCs), where the most used dyes bind to the metal oxide surface through carboxylic acid terminations. To improve the surface reactivity, metal-phosphate bilayers of Ni or Co were synthesized on anatase TiO₂ compact oxide and nanotubes. In both cases, time-of-flight secondary ion mass spectrometry (ToF-SIMS) and X-ray photoelectron spectroscopy (XPS) results showed that the bilayers were successfully formed and that the phosphate layer works as an intermediate between TiO₂ and the other species. ToF-SIMS depth profiles of modified nanotubes showed that Ni and Co are present through the whole tube length and reduce in content after heat treatment, in agreement with XPS results. Phosphate groups, on the other hand, are more present in the tubes' depth, and their content on the surface is reduced upon exposure to temperature. The reactivity of the modified surfaces toward carboxylic acid-terminated molecules, as stearic acid and Ru-based N719 dye, was evaluated. Contact angle measurements together with dye desorption experiments demonstrated that the Co-phosphate bilayers heat-treated at 300 °C resulted in the largest enhancement compared to the reference. Bilayer-modified compact anatase TiO₂ and anatase TiO₂ nanotubes were utilized as photoanodes in DSSCs. An increase in efficiency was observed for all modified electrodes with phosphate-Co treatment, leading to the highest J_SC values and an efficiency improvement of 48%.