Surface Characterization and Platelet Adhesion on Thin Hydrogel Films of Poly(vinyl ether)

UV-Induced Thiol-Ene "Click" Surface Grafting Polymerization on BOPP Substrate and Its Postmodifying for Hydrophilic and Antibacterial Applications

This paper proposed a novel and versatile surface modification route by integrating UV light-mediated thiol-ene "click" surface grafting polymerization and postmodification via the reactions of the surface thiol groups. At first, poly(thiol ether) layers with tunable thiol group density, up to 8.2 × 102 ea/nm3 for cross-linked grafting layers, were grafted from biaxially oriented polypropylene (BOPP) film. Then, the surface -SH groups reacted with epoxy compounds to introduce quaternary ammonium salt. With the immobilized quaternary ammonium salt and coordinated Zn2+ ions, the modified film demonstrated 99.98% antibacterial rate against Staphylococcus aureusafter soaking in DI water for 21 days and in a highly alkaline environment (0.1 M NaOH aqueous solution) for 3 days, and the surface water contact angle decreased to 39°. At last, the polymethacrylate chains were also successfully grafted from the surface thiol groups of the cross-linked poly(thiol ether) under visible light irradiation. With 2-(dimethyldodecylammonium) ethyl methacrylate as the grafting monomer, the modified BOPP film had shown a 99.99% antibacterial rate against both Escherichia coliand S. aureus. Meanwhile, with 2-methacryloxyethyl phosphoryl choline as grafting monomer, the modified surface showed an excellent antibioadhesion of living S. aureus, and the surface water contact angle was as low as 48°.

Water-Induced Crystal Transition and Accelerated Relaxation Process of Polyamide 4 Chains in Microfibers

Microplastics have recently been identified as one of the major contributors to environmental pollution. To design and control the biodegradability of polymer materials, it is crucial to obtain a better understanding of the aggregation states and thermal molecular motion of polymer chains in aqueous environments. Here, we focus on melt-spun microfibers of a promising biodegradable plastic, polyamide 4 (PA4), with a relatively greater number density of hydrolyzable amide groups, which is regarded as an alternative to polyamide 6. Aggregation states and thermal molecular motion of PA4 microfibers without/with a post-heating drawing treatment under dry and wet conditions were examined by attenuated total reflectance-Fourier transform infrared spectroscopy and wide-angle X-ray diffraction analysis in conjunction with dynamic mechanical analysis. Sorbed water molecules in the microfibers induced the crystal transition from a meta-stable γ-form to a thermodynamically stable α-form via activation of the molecular motion of PA4 chains. Also, the post-drawing treatment caused a partial structural change of PA4 chains, from an amorphous phase to a crystalline phase. These findings should be useful for designing PA4-based structural materials applicable for use in marine environments.

A facile method for grafting functional hydrogel films on PTFE, PVDF, and TPX polymers

The use of polymeric materials in biomedical applications requires a judicious control of surface properties as they are directly related to cellular interactions and biocompatibility. The most desired chemical surface properties include hydrophilicity and the presence of functional groups for surface modification. In this work, we describe a method to graft a highly stable, ultra-thin, amine-functional hydrogel layer onto highly inert surfaces of poly(tetrafluoroethylene) (PTFE), poly(vinylidene fluoride) (PVDF), and poly(4-methyl-1-pentene) (PMP or TPX). Covalent grafting is realized with hydrophilic poly(vinylamine-co-acetamide)s by C-H insertion crosslinking (CHic) chemistry initiated by UV light. These polyvinylamides carry tetrafluorophenyl azide groups as photo or thermo activated binding sites and contain further free amine groups, which can be used to bind peptides such as biological ligands, polysaccharides, or other hydrogel layers. The covalently bound surface layers resist intensive Soxhlet extraction confirming the stability of the coating. Fluorescent staining verified the accessibility of free primary amine groups, which can be used for the functionalization of the surface with bioactive molecules. The coating demonstrates hydrophobic wetting behavior when conditioned in air and hydrophilic wetting behavior when conditioned in water showing the presence of loosely crosslinked polymer chains that can re-orient. We believe that the reported application of CHic for the surface modification of fluorinated polymers like PTFE and PVDF as well as TPX can form the basis for advanced biocompatible and biofunctional surface engineering.

Two-Dimensional Cellular Patterning on a Polymer Film Based on Interfacial Stiffness

The mechanical properties in the outermost region of a polymer film strongly affect various material functions. We here propose a novel and promising strategy for the two-dimensional regulation of the mechanical properties of a polymer film at the water interface based on an inkjet drawing of silica nanoparticles (SNPs) underneath it. A film of poly(2-hydroxyethyl methacrylate) (PHEMA), which exhibits excellent bioinertness properties at the water interface, was well fabricated on a substrate with a pattern of SNPs. X-ray photoelectron spectroscopy and atomic force microscopy confirmed that the surface of the PHEMA film was flat and chemically homogeneous. However, the film surface was in-plane heterogeneous in stiffness due to the presence of the underlying SNP lines. It was also noted that NIH/3T3 fibroblast cells selectively adhered and formed aggregates on the areas under which an SNP line was drawn.

Modification of a Polymer Surface by Partial Swelling Using Nonsolvents

Surface modification without changing the physical properties in the bulk is of pivotal importance for the development of polymers as devices. We recently proposed a simple surface functionalization method for polymer films by partial swelling using a nonsolvent and demonstrated the incorporation of poly(2-methoxyethyl acrylate) (PMEA), which has an excellent antibiofouling ability, only into the outermost region of a poly(methyl methacrylate) (PMMA) film. We here extend this technology to another versatile polymer, polystyrene (PS). In this case, PS and PMEA have different solubility parameters making it difficult to select a suitable solvent, which is a nonsolvent for PS and a good solvent for PMEA, unlike the combination of PMMA with PMEA. Thus, such a solvent was first sought by examining the swelling behavior of PS films in contact with various alcohols. Once a mixed solvent of methanol/1-butanol (50/50 (v/v)) was chosen, PMEA chains could be successfully incorporated at the outermost region of the PS film. Atomic force microscopy in conjunction with neutron reflectivity revealed that chains of PMEA incorporated in the PS surface region were well swollen in water. This leads to an excellent ability to suppress the adhesion of platelets on the PS film.

Controlling Surface-Induced Platelet Activation by Agarose and Gelatin-Based Hydrogel Films

Platelet-surface interaction is of paramount importance in biomedical applications as well as in vitro studies. However, controlling platelet-surface activation is challenging and still requires more effort as they activate immediately when contacting with any nonphysiological surface. As hydrogels are highly biocompatible, in this study, we developed agarose and gelatin-based hydrogel films to inhibit platelet-surface adhesion. We found promising agarose films that exhibit higher surface wettability, better controlled-swelling properties, and greater stiffness compared to gelatin, resulting in a strong reduction of platelet adhesion. Mechanical properties and surface wettability of the hydrogel films were varied by adding magnetite (Fe3O4) nanoparticles. While all of the films prevented platelet spreading, films formed by agarose and its nanocomposite repelled platelets and inhibited platelet adhesion and activation stronger than those of gelatin. Our results showed that platelet-surface activation is modulated by controlling the properties of the films underneath platelets and that the bioinert agarose can be potentially translated to the development of platelet storage and other medical applications.

Dual dynamically crosslinked thermosensitive hydrogel with self-fixing as a postoperative anti-adhesion barrier

Tissue adhesion is a severe postoperative complication. Various strategies have been developed to minimize postoperative adhesion, but the clinical efficacy is still far from satisfactory. Herein, we present a dual dynamically crosslinked hydrogel to serve as a physical postoperative anti-adhesion barrier. The hydrogel was generated by dynamic chemical oxime bonding from alkoxyamine-terminated Pluronic F127 (AOP127) and oxidized hyaluronic acid (OHA), as well as hydrophobic association of AOP127. Rheological analysis demonstrated that the hydrogel exhibits temperature sensitivity. At 37 °C, it shows much higher modulus and higher stability than the Pluronic F127 hydrogel. Hemolytic assays suggested that the hydrogel undergoes low hemolysis. In addition, it exhibited anti-adhesion to blood cells in blood cell adhesion tests. It also showed an anti-attachment effect to fibroblasts and biocompatibility in vitro cell studies. Macroscopic evaluation and lap-shear tests revealed that the hydrogel has a moderate adhesive capacity to tissue, which is important for self-fixation. A rat model of sidewall defect-bowel abrasion was established to evaluate the anti-adhesion effect in vivo. The gross observation and pathological analysis revealed a significant reduction in postoperative peritoneal adhesion in the AOP127/OHA hydrogel-treated group than those treated with normal saline or Pluronic F127 hydrogel. Hence, the dual dynamically crosslinked hydrogel with self-fixable capacity may be suitable as a physical barrier for postoperative adhesion prevention. STATEMENT OF SIGNIFICANCE: Despite the development of numerous postoperative anti-adhesion barriers, their anti-adhesion efficacy is still limited in clinical trials due to poor tissue adhesion and rapid clearance from injured areas. Herein, we have developed a dual dynamic crosslinked hydrogel, generated by dynamic oxime bonds and hydrophobic interactions. The hydrogel is temperature-sensitive and demonstrates moderate tissue adhesion capacity, which allows for self-fixation when applied to defects. The introduction of dynamic covalent bonds improves the stability of the hydrogel. Moreover, the hydrogel not only displays appropriate hemocompatibility, cytocompatibility and anti-adhesion of blood cells and fibroblasts, but it also effectively contributes to preventing postoperative peritoneal adhesions in vivo. Hence, this dual dynamic crosslinked hydrogel may have potential applications as a physical barrier in clinical practice.

Design of a star-like hyperbranched polymer having hydrophilic arms for anti-biofouling coating

A star-like hyperbranched polymer having hydrophilic poly(ethyleneoxide acrylate) arms (HB-PEO9A) was prepared by a core-first method based on atom transfer radical polymerization. The PEO9A layer coated on a solid substrate was dissolved by water, and effectively inhibited protein adsorption and cell adhesion.

Effect of Surface Hydration on Antifouling Properties of Mixed Charged Polymers

Interfacial water structure on a polymer surface in water (or surface hydration) is related to the antifouling activity of the polymer. Zwitterionic polymer materials exhibit excellent antifouling activity due to their strong surface hydration. It was proposed to replace zwitterionic polymers using mixed charged polymers because it is much easier to prepare mixed charged polymer samples with much lower costs. In this study, using sum frequency generation (SFG) vibrational spectroscopy, we investigated interfacial water structures on mixed charged polymer surfaces in water and how such structures change while being exposed to salt solutions and protein solutions. The 1:1 mixed charged polymer exhibits excellent antifouling property whereas other mixed charged polymers with different ratios of the positive/negative charges do not. It was found that on the 1:1 mixed charged polymer surface, SFG water signal is dominated by the contribution of the strongly hydrogen bonded water molecules, indicating strong hydration of the polymer surface. The responses of the 1:1 mixed charged polymer surface to salt solutions are similar to those of zwitterionic polymers. Interestingly, exposure to high concentrations of salt solutions leads to stronger hydration of the 1:1 mixed charged polymer surface after replacing the salt solution with water. Protein molecules do not substantially perturb the interfacial water structure on the 1:1 mixed charged polymer surface and do not adsorb to the surface, showing that this mixed charged polymer is an excellent antifouling material.

Structures and Adhesion Properties at Polyethylene/Silica and Polyethylene/Nylon Interfaces

The molecular structures of buried interfaces of maleic anhydride grafted and ungrafted polyethylene films with silica and nylon surfaces were studied in situ using sum-frequency generation (SFG) vibrational spectroscopy. Grafting maleic anhydride to polyethylene altered the molecular structures at buried interfaces, including changing the orientation of polymer methylene groups and resulting in the presence of C═O groups at silica interfaces. These molecular level changes are correlated with enhanced adhesion properties, with ordered C═O groups and in-plane orientation of the methylene groups associated with higher levels of adhesion. While improved adhesion was observed for grafted polyethylene at the nylon interface, no C═O groups were detected at the interface using SFG, for films thermally treated at 185 °C. In this case, either no C═O groups are present at the interface or they are disordered; the latter explanation is more likely, considering the observed improvement in adhesion.