Degradation Kinetics during Oxygen Electrocatalysis on Perovskite-Based Surfaces in Alkaline Media

High-Performance RuOx Catalyst with Advanced Mesoporous Structure for Oxygen Evolution Reaction

Polymer electrolyte membrane water electrolysis (PEMWE) is regarded as one of the most important cornerstone technologies in the upcoming hydrogen society. However, one of the major problems it encounters is its slow oxygen evolution kinetics, which necessitates the use of large amounts of precious metal catalysts to ensure a satisfactory reaction rate. Herein, we have prepared a series of RuO_x with porous structures and ultrahigh Ru utilization toward the oxygen evolution reaction. All porous samples exhibit an enhanced catalytic performance compared with commercial RuO_x. Particularly, for the RuO_x-350 sample, the overpotential to reach 10 mA cm^-2 is as low as 225 mV. It has obvious advantages among all reported pure RuO₂-based catalysts. Here, a new strategy was raised to construct efficient RuO₂ electrocatalysts with outstanding activity and stability for water electrolysis technology.

Atomistic Insights into Activation and Degradation of La0.6Sr0.4CoO3-δ Electrocatalysts under Oxygen Evolution Conditions

The stability of perovskite oxide catalysts for the oxygen evolution reaction (OER) plays a critical role in their applicability in water splitting concepts. Decomposition of perovskite oxides under applied potential is typically linked to cation leaching and amorphization of the material. However, structural changes and phase transformations at the catalyst surface were also shown to govern the activity of several perovskite electrocatalysts under applied potential. Hence, it is crucial for the rational design of durable perovskite catalysts to understand the interplay between the formation of active surface phases and stability limitations under OER conditions. In the present study, we reveal a surface-dominated activation and deactivation mechanism of the prominent electrocatalyst La_0.6Sr_0.4CoO_3−δ under steady-state OER conditions. Using a multiscale microscopy and spectroscopy approach, we identify the evolving Co-oxyhydroxide as catalytically active surface species and La-hydroxide as inactive species involved in the transient degradation behavior of the catalyst. While the leaching of Sr results in the formation of mixed surface phases, which can be considered as a part of the active surface, the gradual depletion of Co from a self-assembled active CoO(OH) phase and the relative enrichment of passivating La(OH)₃ at the electrode surface result in the failure of the perovskite catalyst under applied potential.

Activity-Stability Relationships in Oxide Electrocatalysts for Water Electrolysis

The oxygen evolution reaction (OER) is one of the key kinetically limiting half reactions in electrochemical energy conversion. Model epitaxial catalysts have emerged as a platform to identify structure-function-relationships at the atomic level, a prerequisite to establish advanced catalyst design rules. Previous work identified an inverse relationship between activity and the stability of noble metal and oxide OER catalysts in both acidic and alkaline environments: The most active catalysts for the anodic OER are chemically unstable under reaction conditions leading to fast catalyst dissolution or amorphization, while the most stable catalysts lack sufficient activity. In this perspective, we discuss the role that epitaxial catalysts play in identifying this activity-stability-dilemma and introduce examples of how they can help overcome it. After a brief review of previously observed activity-stability-relationships, we will investigate the dependence of both activity and stability as a function of crystal facet. Our experiments reveal that the inverse relationship is not universal and does not hold for all perovskite oxides in the same manner. In fact, we find that facet-controlled epitaxial La_0.6Sr_0.4CoO_3-δ catalysts follow the inverse relationship, while for LaNiO_3-δ, the (111) facet is both the most active and the most stable. In addition, we show that both activity and stability can be enhanced simultaneously by moving from La-rich to Ni-rich termination layers. These examples show that the previously observed inverse activity-stability-relationship can be overcome for select materials and through careful control of the atomic arrangement at the solid-liquid interface. This realization re-opens the search for active and stable catalysts for water electrolysis that are made from earth-abundant elements. At the same time, these results showcase that additional stabilization via material design strategies will be required to induce a general departure from inverse stability-activity relationships among the transition metal oxide catalysts to ultimately grant access to the full range of available oxides for OER catalysis.

Surface Charge Modulation of Perovskite Oxides at the Crystalline Junction with Layered Double Hydroxide for a Durable Rechargeable Zinc-Air Battery

Perovskite oxides have emerged as promising oxygen electrocatalysts for fuel cells and batteries, yet their catalytic activity and long-term stability are under debate because of local surface alterations and instabilities under sustained oxidative potential. Interconnected particles (40 nm) of Ba_0.6Sr_0.4Co_0.79Fe_0.21O_2.67 (BSCF) are decorated by 10-50 wt % Ni_0.6Fe_0.4(OH)_x [NiFe] layered double hydroxide (LDH) sheets via polyethylenimine linkage. This composite renders modulation of surface charges through Coulombic interaction and provides a leeway for electron mobility between the two components, which bestows relief to the BSCF surface from oxidative degradation. NiFe-LDH (25 wt %) bound to BSCF (BSCF/NiFe-25) is found to be the optimized bifunctional composite after considering the total overpotential of oxygen evolution and reduction reactions. With BSCF/NiFe-25 at the air electrode of a prototype-rechargeable Zn-air battery, a low discharge-charge voltage gap (1.16 V at 10 mA cm^-2), unaltered cyclic stability over 100 h, and an energy density of 776.3 mW·h·g_Zn^-1 are achieved. BSCF/NiFe-25 outperforms BSCF and is comparable to 20% Pt/C-RuO₂ cathodes in all the standard figures of merit. Our work presents a general strategy to circumvent the reconstructions of perovskite oxide surface under oxidative potentials, by creating highly active, stable, and inexpensive bifunctional composite electrocatalysts for future electrochemical energy storage and conversion devices.