Absolute Orientations of Water Molecules at Zwitterionic Polymer Interfaces and Interfacial Dynamics after Salt Exposure

Enzymatically Built Nanoenabled Antimicrobial Coating on Urinary Catheters

Catheter-associated urinary tract infections represent a major share of nosocomial infections, and are associated with longer periods of hospitalization and a huge financial burden. Currently, there are only a handful of commercial materials that reduce biofilm formation on urinary catheters, mostly relying on silver alloys. Therefore, we combined silver-phenolated lignin nanoparticles with poly(carboxybetaine) zwitterions to build a composite antibiotic-free coating with bactericidal and antifouling properties. Importantly, the versatile lignin chemistry enabled the formation of the coating in situ, enabling both the nanoparticle grafting and the radical polymerization by using only the oxidative activity of laccase. The resulting surface efficiently prevented nonspecific protein adsorption and reduced the bacterial viability on the catheter surface by more than 2 logs under hydrodynamic flow, without exhibiting any apparent signs of cytotoxicity. Moreover, the said functionality was maintained over a week both in vitro and in vivo, whereby the animal models showed excellent biocompatibility.

Sulfobetaine-Siloxanes: A Class of Self-Destructive Surfactants

The hydrolytic susceptibility of sulfobetaine-siloxane surfactants is investigated by comparison of a homologous series in this subclass of surfactants (R-(CH2)3N+(Me)2(CH2)3SO3-; R = (Me3SiO)3Si-, (Me3SiO)2Si(Me)-, (Me2SiO)3-Si(Me)-) with an analogue series of oxyethylene-siloxane surfactants (R-(CH2)3(OCH2CH2)10.2OH; R = (Me3SiO)3Si-, (Me3SiO)2Si(Me)-, (Me2SiO)3-Si(Me)-). Nuclear magnetic resonance (NMR) monitoring of these surfactants in an aqueous solution shows that the presence of the sulfobetaine head structure greatly enhances the hydrolysis rate of the siloxane tail as compared with oxyethylene-siloxane analogue control experiments. This sulfobetaine effect is confirmed by adding a model compound, (Me)3N+(CH2)3SO3-, to the oxyethylene-siloxane surfactants and observing the large hydrolysis enhancement. Measurements of pH indicate the sulfobetaine presence greatly enhances acidity, but rigorous analysis could discover no source of acid other than the presence of the sulfobetaine structure. Titration measurements confirmed the presence of a tightly bound hydration layer of 4-7 water molecules per sulfobetaine group. It is speculated that the source of acidity may originate from an aqueous exclusion zone nucleated by the hydrated sulfobetaine at the interface of a sulfobetaine-siloxane surfactant bilayer aggregate. Hydrolysis prevention is investigated by addition of a pH 7 phosphate buffer, of an alkyl polyglycoside cosurfactant, and of a combination of both, with a finding of very significant but not complete suppression of the hydrolysis.

New Nano-Crystalline Hydroxyapatite-Polycarboxy/Sulfo Betaine Hybrid Materials: Synthesis and Characterization

Hybrid materials based on calcium phosphates and synthetic polymers can potentially be used for caries protection due to their similarity to hard tissues in terms of composition, structure and a number of properties. This study is focused on the biomimetic synthesis of hybrid materials consisting of hydroxiapatite and the zwitterionic polymers polysulfobetaine (PSB) and polycarboxybetaine (PCB) using controlled media conditions with a constant pH of 8.0-8.2 and Ca/P = 1.67. The results show that pH control is a dominant factor in the crystal phase formation, so nano-crystalline hydroxyapatite with a Ca/P ratio of 1.63-1.71 was observed as the mineral phase in all the materials prepared. The final polymer content measured for the synthesized hybrid materials was 48-52%. The polymer type affects the final microstructure, and the mineral particle size is thinner and smaller in the synthesis performed using PCB than using PSB. The final intermolecular interaction of the nano-crystallized hydroxyapatite was demonstrated to be stronger with PCB than with PSB as shown by our IR and Raman spectroscopy analyses. The higher remineralization potential of the PCB-containing synthesized material was demonstrated by in vitro testing using artificial saliva.

Absolute local conformation of poly(methyl methacrylate) chains adsorbed on a quartz surface

Polymer chains at a buried interface with an inorganic solid play a critical role in the performance of polymer nanocomposites and adhesives. Sum frequency generation (SFG) vibrational spectroscopy with a sub-nanometer depth resolution provides valuable information regarding the orientation angle of functional groups at interfaces. However, in the case of conventional SFG, since the signal intensity is proportional to the square of the second-order nonlinear optical susceptibility and thereby loses phase information, it cannot be unambiguously determined whether the functional groups face upward or downward. This problem can be solved by phase-sensitive SFG (ps-SFG). We here applied ps-SFG to poly(methyl methacrylate) (PMMA) chains in direct contact with a quartz surface, shedding light on the local conformation of chains adsorbed onto the solid surface. The measurements made it possible to determine the absolute orientation of the ester methyl groups of PMMA, which were oriented toward the quartz interface. Combining ps-SFG with all-atomistic molecular dynamics simulation, the distribution of the local conformation and the driving force are also discussed.

Antifouling polymers for nanomedicine and surfaces: recent advances

Antifouling polymers are materials that can resist nonspecific interactions with cells, proteins, and other biomolecules. Typically, they are hydrophilic polymers with polar or charged moieties that are capable of strong nonbonding interactions with water molecules. This propensity to bind water generates a surface hydration layer that reduces nonspecific interactions with other molecules and is paramount to the antifouling behavior. This property is especially useful for nanoscale applications such as nanomedicine and surface modifications at the molecular level. In nanomedicine, antifouling polymers such as poly(ethylene glycol) and its alternatives play a key role in shielding drug molecules and therapeutic proteins/genes from the immune system within nanoassemblies, thereby enabling effective delivery to target tissues. For coatings, antifouling polymers help to prevent adhesion of cells and molecules to surfaces and are thus valued in marine and biomedical device applications. In this Review, we survey recent advances in antifouling polymers in the context of nanomedicine and coatings, while shining the spotlight on the major polymer classes such as PEG, polyzwitterions, poly(oxazoline)s, and other nonionic hydrophilic polymers.

Supramolecular Self-Healing Antifouling Coating for Dental Materials

In orthodontic treatment, orthodontic appliances are prone to bacterial infections, which pose a risk to oral health. Surface modification of orthodontic appliances has been explored to improve their antifouling properties and impart antibacterial capabilities, inhibiting initial bacterial adhesion and biofilm formation. However, coatings are susceptible to damage in the complex oral environment, leading to a loss of functionality. Here, we have prepared an antifouling self-healing coating based on supramolecular bonding by employing a simple spin coating method. The presence of the hydrophilic zwitterionic trimethylamine N-oxide (TMAO) and the hydrophobic antimicrobial moieties triclosan acrylate (TCSA) imparts to the polymers an amphiphilic structure and enhances the interaction with bacteria, resulting in excellent antimicrobial activity and surface antifouling properties. The multiple hydrogen bonds of ureido-pyrimidinone methacrylate (UPyMA) and ionic interactions contained in the polymers not only increased the adhesion of the coating to the material substrate (approximately 3 times) but also endowed the coating with the intrinsic self-healing ability to restore the antibiofouling properties at oral temperature and humidity. Finally, the polymer coating is biologically safe both in vitro and in vivo, showing no cytotoxic effects on cells and tissues. This research offers a promising avenue for improving the performance of orthodontic appliances and contributes to the maintenance and treatment of oral health.

pH-Mediated Mucus Penetration of Zwitterionic Polydopamine-Modified Silica Nanoparticles

Zwitterionic polymers have emerged as promising trans-mucus nanocarriers due to their superior antifouling properties. However, for pH-sensitive zwitterionic polymers, the effect of the pH microenvironment on their trans-mucus fate remains unclear. In this work, we prepared a library of zwitterionic polydopamine-modified silica nanoparticles (SiNPs-PDA) with an isoelectric point of 5.6. Multiple-particle tracking showed that diffusion of SiNPs-PDA in mucus with a pH value of 5.6 was 3 times faster than that in mucus with pH value 3.0 or 7.0. Biophysical analysis found that the trans-mucus behavior of SiNPs-PDA was mediated by hydrophobic and electrostatic interactions and hydrogen bonding between mucin and the particles. Furthermore, the particle distribution in the stomach, intestine, and lung demonstrated the pH-mediated mucus penetration behavior of the SiNPs-PDA. This study reveals the pH-mediated mucus penetration behavior of zwitterionic nanomaterials, which provides rational design strategies for zwitterionic polymers as nanocarriers in various mucus microenvironments.

Hydration behaviors of nonfouling zwitterionic materials

Zwitterionic materials have emerged as highly effective ultralow fouling materials for many applications, however the underlying mechanism of fouling resistance remains unclear. Using ab initio molecular dynamics simulations and surface-sensitive sum frequency generation vibrational spectroscopy, we studied the hydration behaviors of zwitterionic materials, including trimethylamine-N-oxide (TMAO) and carboxybetaines of different charge-separation distances, to understand their fouling-resistant mechanism and provide a design principle for improved performance. Our study reveals that the interplay among hydrogen bonding, net charge, and dipole moment is crucial to the fouling-resistant capabilities of zwitterionic materials. Shortening of the zwitterionic spacing strengthens hydrogen bonding with water against biomolecule attachment due to the increased electrostatic and induction interactions, charge transfer, and improved structural stability. Moreover, the shortened charge separation reduces the dipole moment of zwitterionic materials with an intrinsic near-neutral net charge, decreasing their electrostatic and dipole-dipole interactions with biofoulers, and increasing their resistance to fouling. Compared to carboxybetaine compounds, TMAO has the shortest zwitterionic spacing and exhibits the strongest hydrogen bonding, the smallest net charge, and the minimum dipole moment, making it an excellent nonfouling material.

Conformation and Orientation of Antimicrobial Peptides MSI-594 and MSI-594A in a Lipid Membrane

There is significant interest in the development of antimicrobial compounds to overcome the increasing bacterial resistance to conventional antibiotics. Studies have shown that naturally occurring and de novo-designed antimicrobial peptides could be promising candidates. MSI-594 is a synthetic linear, cationic peptide that has been reported to exhibit a broad spectrum of antimicrobial activities. Investigation into how MSI-594 disrupts the cell membrane is important for better understanding the details of this antimicrobial peptide (AMP)'s action against bacterial cells. In this study, we used two different synthetic lipid bilayers: zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and anionic 7:3 POPC/1-palmitoyl-2-oleoyl-sn-glycero-3-phospho(1'-rac-glycerol) (POPG). Sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) were used to determine the orientations of MSI-594 and its analogue MSI-594A associated with zwitterionic POPC and anionic 7:3 POPC/POPG lipid bilayers. The simulated ATR-FTIR and SFG spectra using nuclear magnetic resonance (NMR)-determined structures were compared with experimental spectra to optimize the bent angle between the N- (1-11) and C- (12-24) termini helices and the membrane orientations of the helices; since the NMR structure of the peptide was determined from lipopolysaccharide (LPS) micelles, the optimization was needed to find the most suitable conformation and orientation in lipid bilayers. The reported experimental results indicate that the optimized MSI-594 helical hairpin structure adopts a complete lipid bilayer surface-bound orientation (denoted "face-on") in both POPC and 7:3 POPC/POPG lipid bilayers. The analogue peptide, MSI-584A, on the other hand, exhibited a larger bent angle between the N- (1-11) and C- (12-24) termini helices with the hydrophobic C-terminal helix inserted into the hydrophobic region of the bilayer (denoted "membrane-inserted") when interacting with both POPC and 7:3 POPC/POPG lipid bilayers. These experimental findings on the membrane orientations suggest that both peptides are likely to disrupt the cell membrane through the carpet mechanism.

Ice recrystallization inhibition mechanism of zwitterionic poly(carboxybetaine methacrylate)

Understanding the ice recrystallization inhibition (IRI) mechanism is of fundamental importance for the rational design of novel antifreeze protein mimetics and reducing IR-related damage. In this communication, using quantitive experimental methods and molecular dynamics simulations we demonstrate that zwitterionic poly(carboxybetaine methacrylate) (PCBMA) can serve as a novel IRI-active substance. This work unravels the atomic-level details of the IRI mechanism of zwitterionic antifreeze protein mimetics and provides insight into the development of next-generation antifreeze protein mimetics.

Antibacterial Adhesion Strategy for Dental Titanium Implant Surfaces: From Mechanisms to Application

Dental implants are widely used to restore missing teeth because of their stability and comfort characteristics. Peri-implant infection may lead to implant failure and other profound consequences. It is believed that peri-implantitis is closely related to the formation of biofilms, which are difficult to remove once formed. Therefore, endowing titanium implants with anti-adhesion properties is an effective method to prevent peri-implant infection. Moreover, anti-adhesion strategies for titanium implant surfaces are critical steps for resisting bacterial adherence. This article reviews the process of bacterial adhesion, the material properties that may affect the process, and the anti-adhesion strategies that have been proven effective and promising in practice. This article intends to be a reference for further improvement of the antibacterial adhesion strategy in clinical application and for related research on titanium implant surfaces.

Biomimetic materials based on zwitterionic polymers toward human-friendly medical devices

This review summarizes recent research on the design of polymer material systems based on biomimetic concepts and reports on the medical devices that implement these systems. Biomolecules such as proteins, nucleic acids, and phospholipids, present in living organisms, play important roles in biological activities. These molecules are characterized by heterogenic nature with hydrophilicity and hydrophobicity, and a balance of positive and negative charges, which provide unique reaction fields, interfaces, and functionality. Incorporating these molecules into artificial systems is expected to advance material science considerably. This approach to material design is exceptionally practical for medical devices that are in contact with living organisms. Here, it is focused on zwitterionic polymers with intramolecularly balanced charges and introduce examples of their applications in medical devices. Their unique properties make these polymers potential surface modification materials to enhance the performance and safety of conventional medical devices. This review discusses these devices; moreover, new surface technologies have been summarized for developing human-friendly medical devices using zwitterionic polymers in the cardiovascular, cerebrovascular, orthopedic, and ophthalmology fields.

Roles of interfacial water states on advanced biomedical material design

When biomedical materials come into contact with body fluids, the first reaction that occurs on the material surface is hydration; proteins are then adsorbed and denatured on the hydrated material surface. The amount and degree of denaturation of adsorbed proteins affect subsequent cell behavior, including cell adhesion, migration, proliferation, and differentiation. Biomolecules are important for understanding the interactions and biological reactions of biomedical materials to elucidate the role of hydration in biomedical materials and their interaction partners. Analysis of the water states of hydrated materials is complicated and remains controversial; however, knowledge about interfacial water is useful for the design and development of advanced biomaterials. Herein, we summarize recent findings on the hydration of synthetic polymers, supramolecular materials, inorganic materials, proteins, and lipid membranes. Furthermore, we present recent advances in our understanding of the classification of interfacial water and advanced polymer biomaterials, based on the intermediate water concept.

Evidence for a Local Field Effect in Surface Plasmon-Enhanced Sum Frequency Generation Vibrational Spectra

Surface plasmon-enhanced vibrational spectroscopy has been demonstrated to be an important highly sensitive diagnostic technique, but its enhanced mechanism is yet to be explored. In this study, we couple femtosecond sum frequency generation vibrational spectroscopy (SFG-VS) with surface plasmon generated by the excitation of localized gold nanorods/nanoparticles and investigate the plasmonically enhanced factors (EFs) of SFG signals from poly(methyl methacrylate) films. Through monitoring the SFG intensity of carbonyl and ester methyl groups, we have established a correlation between EFs and the coupling of localized surface plasmon resonance with SFG and visible beams. It is found that the total enhanced factor is approximately proportional to the square of an enhanced factor of the SFG electromagnetic field and the fourth power of the enhanced factor of the visible electromagnetic field. The local field effect is roughly expressed to be the square of an enhanced factor of the visible electromagnetic field. This finding will help to guide the experimental design of plasmon-enhanced SFG to drastically improve the detection sensitivity and thus provide greater insight into the ultrafast dynamics near plasmonic surfaces.

Choose your own adventure: Picosecond or broadband vibrational sum-frequency generation spectroscopy

Vibrational sum-frequency generation (VSFG) spectroscopy is a method capable of measuring chemical structure and dynamics within the interfacial region between two bulk phases. At the core of every experimental system is a laser source that influences the experimental capabilities of the VSFG spectrometer. In this article, we discuss the differences between VSFG spectrometers built with picosecond and broadband laser sources as it will impact everything from material costs, experimental build time, experimental capabilities, and more. A focus is placed on the accessibility of the two different SFG systems to newcomers in the SFG field and provides a resource for laboratories considering incorporating VSFG spectroscopy into their research programs. This Tutorial provides a model decision tree to aid newcomers when determining whether the picosecond or femtosecond laser system is sufficient for their research program and navigates through it for a few specific scenarios.

Surface Hydration and Antifouling Activity of Zwitterionic Polymers

It is believed that the strong surface hydration of zwitterionic polymers leads to excellent antifouling properties. This Perspective presents the recent developments in studies on such surface hydration in situ using sum frequency generation (SFG) vibrational spectroscopy. SFG research provides direct molecular level evidence that zwitterionic polymers have strong surface hydration, which prevents protein adsorption and marine animal attachment. The salt effect and protein interaction on surface hydration of zwitterionic polymers have also been examined using SFG. Possible future research directions on surface hydration of new zwitterionic polymers including zwitterionic hydrogels, copolymers, and mixed charged polymers are discussed. It is also important to combine experimental SFG studies with computer simulations to further elucidate the surface hydration to understand antifouling mechanisms.

Fabrication of Polysulfobetaine Gradient Coating via Oxidation Polymerization of Pyrogallol To Modulate Biointerfaces

A surface with a gradient physical or chemical feature, such as roughness, hardness, wettability, and chemistry, serves as a powerful platform for high-throughput investigation of cell responses to a biointerface. In this work, we developed a continuous antifouling gradient surface using pyrogallol (PG) chemistry. A copolymer of a zwitterionic monomer, sulfobetaine methacrylate, and an amino monomer, aminoethyl methacrylate, were synthesized (pSBAE) and deposited on glass slides via the deposition of self-polymerized PG. A gradient of pSBAE was fabricated on glass slides in 7 min in the presence of an oxidant, ammonium persulfate, by withdrawing the reaction solution. The modified glass slide showed a wettability gradient, determined by measuring the water contact angle. Cell adhesion and protein adsorption were well correlated with surface wettability. We expect that this simple and faster method for the fabrication of a continuous chemical gradient is applicable for high-throughput screening of surface properties to modulate biointerfaces.

Strong Surface Hydration and Salt Resistant Mechanism of a New Nonfouling Zwitterionic Polymer Based on Protein Stabilizer TMAO

Zwitterionic polymers exhibit excellent nonfouling performance due to their strong surface hydrations. However, salt molecules may severely reduce the surface hydrations of typical zwitterionic polymers, making the application of these polymers in real biological and marine environments challenging. Recently, a new zwitterionic polymer brush based on the protein stabilizer trimethylamine N-oxide (TMAO) was developed as an outstanding nonfouling material. Using surface-sensitive sum frequency generation (SFG) vibrational spectroscopy, we investigated the surface hydration of TMAO polymer brushes (pTMAO) and the effects of salts and proteins on such surface hydration. It was discovered that exposure to highly concentrated salt solutions such as seawater only moderately reduced surface hydration. This superior resistance to salt effects compared to other zwitterionic polymers is due to the shorter distance between the positively and negatively charged groups, thus a smaller dipole in pTMAO and strong hydration around TMAO zwitterion. This results in strong bonding interactions between the O- in pTMAO and water, and weaker interaction between O- and metal cations due to the strong repulsion from the N+ and hydration water. Computer simulations at quantum and atomistic scales were performed to support SFG analyses. In addition to the salt effect, it was discovered that exposure to proteins in seawater exerted minimal influence on the pTMAO surface hydration, indicating complete exclusion of protein attachment. The excellent nonfouling performance of pTMAO originates from its extremely strong surface hydration that exhibits effective resistance to disruptions induced by salts and proteins.

Molecular Structure of the Surface-Immobilized Super Uranyl Binding Protein

Recently, a super uranyl binding protein (SUP) was developed, which exhibits excellent sensitivity/selectivity to bind uranyl ions. It can be immobilized onto a surface in sensing devices to detect uranyl ions. Here, sum frequency generation (SFG) vibrational spectroscopy was applied to probe the interfacial structures of surface-immobilized SUP. The collected SFG spectra were compared to the calculated orientation-dependent SUP SFG spectra using a one-excitonic Hamiltonian approach based on the SUP crystal structures to deduce the most likely surface-immobilized SUP orientation(s). Furthermore, discrete molecular dynamics (DMD) simulation was applied to refine the surface-immobilized SUP conformations and orientations. The immobilized SUP structures calculated from DMD simulations confirmed the SUP orientations obtained from SFG data analyzed based on the crystal structures and were then used for a new round of SFG orientation analysis to more accurately determine the interfacial orientations and conformations of immobilized SUP before and after uranyl ion binding, providing an in-depth understanding of molecular interactions between SUP and the surface and the effect of uranyl ion binding on the SUP interfacial structures. We believe that the developed method of combining SFG measurements, DMD simulation, and Hamiltonian data analysis approach is widely applicable to study biomolecules at solid/liquid interfaces.

Synthesis of a zwitterionic N-Ser-Ser-C dimethacrylate cross-linker and evaluation in polyampholyte hydrogels

Polyampholyte hydrogels are attractive materials for tissue engineering scaffolds as they offer a wide variety of features including nonfouling, selective protein delivery, and tunable physical characteristics. However, to improve the potential performance of these materials for in vivo applications, there is a need for a higher diversity of zwitterionic cross-linker species to replace commonly used ethylene glycol (EG) based chemistries. Towards this end, the synthesis of a dipeptide based zwitterionic cross-linker, N-Ser-Ser-C dimethacrylate (S-S) from N-Boc-l-serine is presented. The strategy utilized a convergent coupling of methacrylated serine partners followed by careful global deprotection to yield the zwitterionic cross-linker with good overall yields. This novel cross-linker was incorporated into a polyampholyte hydrogel and its physical properties and biocompatibility were compared against a polyampholyte hydrogel synthesized with an EG-based cross-linker. The S-S cross-linked hydrogel demonstrated excellent nonfouling performance, while promoting enhanced cellular adhesion to fibrinogen delivered from the hydrogel. Therefore, the results suggest that the S-S cross-linker will demonstrate superior future performance for in vivo applications.

Superamphiphilic TiO2 Composite Surface for Protein Antifouling

Unwanted protein adsorption deteriorates fouling processes and reduces analytical device performance. Wettability plays an important role in protein adsorption by affecting interactions between proteins and surfaces. However, the principles of protein adsorption are not completely understood, and surface coatings that exhibit resistance to protein adsorption and long-term stability still need to be developed. Here, a nanostructured superamphiphilic TiO2 composite (TiO2 /SiO2 ) coating that can effectively prevent nonspecific protein adsorption on water/solid interfaces is reported. The confined water on the superamphiphilic surface enables a low adhesion force and the formation of an energy barrier that plays a key role in preventing protein adsorption. This adaptive design protects the capillary wall from fouling in a harsh environment during the bioanalysis of capillary electrophoresis and is further extended to applications in multifunctional microfluidics for liquid transportation. This facile approach is not only perfectly applied in channels with complicated configurations but may also offer significant insights into the design of advanced superwetting materials to control biomolecule adhesion in biomedical devices, microfluidics, and biological assays.

Polymeric Delivery of Therapeutic Nucleic Acids

The advent of genome editing has transformed the therapeutic landscape for several debilitating diseases, and the clinical outlook for gene therapeutics has never been more promising. The therapeutic potential of nucleic acids has been limited by a reliance on engineered viral vectors for delivery. Chemically defined polymers can remediate technological, regulatory, and clinical challenges associated with viral modes of gene delivery. Because of their scalability, versatility, and exquisite tunability, polymers are ideal biomaterial platforms for delivering nucleic acid payloads efficiently while minimizing immune response and cellular toxicity. While polymeric gene delivery has progressed significantly in the past four decades, clinical translation of polymeric vehicles faces several formidable challenges. The aim of our Account is to illustrate diverse concepts in designing polymeric vectors towards meeting therapeutic goals of in vivo and ex vivo gene therapy. Here, we highlight several classes of polymers employed in gene delivery and summarize the recent work on understanding the contributions of chemical and architectural design parameters. We touch upon characterization methods used to visualize and understand events transpiring at the interfaces between polymer, nucleic acids, and the physiological environment. We conclude that interdisciplinary approaches and methodologies motivated by fundamental questions are key to designing high-performing polymeric vehicles for gene therapy.

Effects of Chiral Molecule Modification on Surface Biosorption Behavior

Antifouling materials have many important applications in biomedical devices and marine coating. Oligo(ethylene glycol) (OEG) or poly(ethylene glycol) (PEG) exhibit promising antifouling properties and are widely used in biomedical engineering. Chiral selection is an important phenomenon in biological processes. Because of the influence of steric hindrance, the modification of chiral molecules with different chirality at interfaces will affect the intermolecular interaction at the interfaces and lead to different structures of interfacial molecules. The difference of surface structures such as surface hydration structure would impact the adsorption of biomolecules on the surface, thus causing different varieties of cell adhesion and cell growth. In this study, the influence on surface hydration and surface cell adhesion of OEG self-assembled monolayers (SAMs) modified with cysteine showing different chirality are explored. The water structure at the interfaces of OEG/water in different conditions was probed with sum frequency generation vibrational spectroscopy (SFG-VS). The results show that the interfacial water structure can change significantly with either d-cysteine or l-cysteine modification on OEG. Water molecules are more ordered at the OEG/water interface under the d-cysteine modification on OEG SAMs, which improves the protein adsorption resistance of the surface. In contrast, l-cysteine modification would make the water less ordered at the OEG/protein solution interface and enhance the protein adsorption. Additionally, optical micrographs indicate that l-cysteine can significantly promote the OEG SAMs cell adhesion and growth, while d-cysteine exhibits an inhibitory effect, which is consistent with the results of SFG-VS experiments.

Molecular Insights into Adhesion at a Buried Silica-Filled Silicone/Polyethylene Terephthalate Interface

Silicone adhesives are widely used in many important applications in aviation, automotive, construction, and electronics industries. The mixture of (3-glycidoxypropyl)trimethoxysilane (γ-GPS) and hydroxy-terminated dimethyl methylvinyl co-siloxanol (DMMVS) has been widely used as an adhesion promoter in silicone elastomers to enhance the adhesion between silicone and other materials including polymers. The interfacial molecular structures of silicone elastomers and the adhesion promotion mechanisms of a γ-GPS-DMMVS mixture in silicone without a filler or an adhesion catalyst (AC) have been extensively investigated using sum frequency generation (SFG) vibrational spectroscopy previously. In this research, SFG was applied to study interfacial structures of silicone elastomeric adhesives in the presence of a silica filler and/or a zirconium(IV) acetylacetonate adhesion catalyst at the silicone/polyethylene terephthalate (PET) interface in situ nondestructively to understand their individual and synergy effects. The interfacial structures obtained from the SFG study were correlated to the adhesion behavior to PET. The interfacial reactions of methoxy and epoxy groups of the adhesion promoter were found to play significant roles in enhancing the interfacial adhesion of the buried interface. This research provides an in-depth molecular-level understanding on the effects of a filler and an adhesion catalyst on the interfacial behavior of the adhesion promotion system for silicone elastomers as well as the related impact on adhesion.

Probing Molecular Interactions between Surface-Immobilized Antimicrobial Peptides and Lipopolysaccharides In Situ

Lipopolysaccharide (LPS) is a component of the outer membrane of Gram-negative bacteria. Recently, a label-free immobilized antimicrobial peptide (AMP) surface plasmon resonance platform was developed to successfully distinguish LPS from multiple bacterial strains. Among the tested AMPs, SMAP29 exhibited excellent affinity with LPS and has two independent LPS-binding sites located at two termini of the peptide. In this study, sum frequency generation vibrational spectroscopy was applied to investigate molecular interactions between three LPS samples and surface-immobilized SMAP29 via the N-terminus, the C-terminus, and a middle site at the solid/liquid interface in situ in real-time, supplemented by circular dichroism spectroscopy. It was found that the conformations and orientations of surface-immobilized SMAP29 via different sites are different when interacting with the same LPS, with different interaction kinetics. The same SMAP29 sample also has different structures and interaction kinetics while interacting with different LPS samples with different charge densities and hydrophobicities. The observed results on molecular interactions between surface-immobilized peptides and LPS can well interpret the different adsorption amounts of various LPSs on different surface-immobilized peptides.

Probing Molecular Behavior of Carbonyl Groups at Buried Nylon/Polyolefin Interfaces in Situ

Nylon and maleic anhydride (MAH)-grafted polyolefin-based thin co-extruded multilayer films are widely used in packaging applications encountered in daily life. The molecular structure of the nylon/MAH-grafted polyolefin buried interface and molecular bonding between these two chemically dissimilar layers are thought to play an important role in achieving packaging structures with good adhesion. Here, the molecular bonds present at a nylon/maleic anhydride (MAH)-grafted polyethylene buried interface were systematically examined in situ for the first time using sum frequency generation (SFG) vibrational spectroscopy. The carbonyl stretching frequency region of the SFG spectra of a nylon/MAH-grafted polyethylene buried interface showed the presence of hydrolyzed MAH groups grafted to the polyethylene chain and very low levels of unreacted MAH enriched at the buried interface. The ability of SFG to detect these molecular species at the buried interface yields important understanding of the interfacial molecular structure and provides the basis for subsequent in situ studies of the bonding reaction between the grafted MAH and nylon directly at the interface. This understanding may guide the design of multilayer films with improved properties such as enhanced adhesion between polymer layers. The approach used in this study is general and is applicable to study the molecular characteristics of other buried interfaces of significance, such as buried interfaces involving polymers in solar cells, polymer semiconductors, and batteries. Nylon impact modification is another area of interest where the interaction between the MAH-grafted elastomer and the continuous phase of nylon is important.

Probing Biological Molecule Orientation and Polymer Surface Structure at the Polymer/Solution Interface In Situ

Polymers are widely used for many applications ranging from biomedical materials, marine antifouling coatings, membranes for biomolecule separation, to substrates for enzyme molecules for biosensing. For such applications, it is important to understand molecular interactions between biological molecules and polymer materials in situ in real time. Such understanding provides vital knowledge to manipulate biological molecule-polymer interactions and to optimize polymer surface structures to improve polymer performance. In this research, sum frequency generation (SFG) vibrational spectroscopy was applied to study interactions between peptides (serving as models for biological molecules) and deuterated polystyrene (d8-PS, serving as a model for polymer materials). The peptide conformations/orientations and polymer surface phenyl orientation during the peptide-d8-PS interactions were determined using SFG. It was found that the π-π interaction between the aromatic amino acids on peptides and phenyl groups on d8-PS surface does not play a significant role. Instead, the peptide-d8-PS interactions are mediated by general hydrophobic interactions between the peptides and the polymer surface.

Ferrocene on Insulator: Silane Coupling to a SiO2 Surface and Influence on Electrical Transport at a Buried Interface with an Organic Semiconductor Layer

A silane coupling-based procedure for decoration of an insulator surface containing abundant hydroxy groups by constructing redox-active self-assembled monolayers (SAMs) is described. A newly synthesized ferrocene (Fc) derivative containing a triethoxysilyl group designated FcSi was immobilized on SiO₂/Si by a simple operation that involved immersing the substrate in a toluene solution of the Fc silane coupling reagent and then rinsing the resulting substrate. X-ray photoelectron spectroscopy (XPS) measurements confirmed that the Fc group was immobilized on SiO₂/Si in the Fe(II) state. Cyclic voltammetry measurements showed that the Fc groups were electrically insulated from the Si electrode by the SiO₂ layer. The FcSi on SiO₂/Si structures were found to serve as a good scaffold for formation of organic semiconductor thin films by vacuum thermal evaporation of C8-BTBT (2,7-dioctyl[1]benzothieno[3,2-b][1]benzothiophene), which is well-known as an organic field-effect transistor (OFET) material. The X-ray diffraction profile indicated that the conventional standing-up conformation of the C8-BTBT molecules perpendicular to the substrates was maintained in the thin films formed on FcSi@SiO₂/Si. Further vacuum thermal evaporation of Au provided an FcSi-based OFET structure with good transfer characteristics. The FcSi-based OFET showed pronounced source-drain current hysteresis between the forward and backward scans. The degree of this hysteresis was varied reversibly via gate bias manipulation, which was presumably accompanied by trapping and detrapping of hole carriers at the Fc-decorated SiO₂ surface. These findings provide new insights into application of redox-active SAMs to nonvolatile OFET memories while also creating new interfaces through junctions with functional thin films, in which the underlying redox-active SAMs play supporting roles.

Universal Antibacterial Surfaces Fabricated from Quaternary Ammonium Salt-Based PNIPAM Microgels

Because of the excellent film-forming ability of poly(N-isopropylacrylamide) (PNIPAM) microgel and high-efficient bactericidal property of quaternary ammonium salt (QAS), QAS-based PNIPAM (QAS-PNIPAM) microgels are synthesized and employed to modify the surface of a range of commonly used materials including metal, plastic, and elastomer. Bacterial culture is carried out on such QAS-PNIPAM microgel-modified surfaces to examine the viability of the attached bacteria. It is found that the bactericidal efficiency is nearly 100% on the modified surfaces of all the studied materials. We attribute the high-efficient bactericidal performance of QAS-PNIPAM microgel film to the QAS component rather than the topography of the microgel film itself. In addition, the microgel film is robust and shows great integrity even after culture of the bacteria and repeated rinses, and the cell experiment demonstrates that this microgel film is cyto-compatible. Therefore, such a simple, versatile method of preparing antibacterial films paves the way for future bactericidal applications.

Corn Oil-Water Separation: Interactions of Proteins and Surfactants at Corn Oil/Water Interfaces

Purification and collection of industrial products from oil-water mixtures are commonly implemented processes. However, the efficiencies of such processes can be severely influenced by the presence of emulsifiers that induce the formation of small oil droplets dispersed in the mixtures. Understanding of this emulsifying effect and its counteractions which occur at the oil/water interface is therefore necessary for the improvement of designs of these processes. In this paper, we investigated the interfacial mechanisms of protein-induced emulsification and the opposing surfactant-induced demulsification related to corn oil refinement. At corn oil/water interfaces, the pH-dependent emulsifying function of zein protein, which is the major storage protein of corn, was elucidated by the surface/interface-sensitive sum frequency generation (SFG) vibrational spectroscopy technique. The effective stabilization of corn oil droplets by zein protein was illustrated and correlated to its ordered amide I group at the oil/water interface. Substantial decrease of this ordering with the addition of three industrial surfactants to corn oil-zein solution mixtures was also observed using SFG, which explains the surfactant-induced destabilization and coalescence of small oil droplets. Surfactant-protein interaction was then demonstrated to be the driving force for the disordering of interfacial proteins, either by disrupting protein layers or partially excluding protein molecules from the interface. The ordered zein proteins at the interface were therefore revealed to be the critical factor for the formation of corn oil-water emulsion.

Superhydrophilicity and strong salt-affinity: Zwitterionic polymer grafted surfaces with significant potentials particularly in biological systems

In recent years, zwitterionic polymers have been frequently reported to modify various surfaces to enhance hydrophilicity, antifouling and antibacterial properties, which show significant potentials particularly in biological systems. This review focuses on the fabrication, properties and various applications of zwitterionic polymer grafted surfaces. The "graft-from" and "graft-to" strategies, surface grafting copolymerization and post zwitterionization methods were adopted to graft lots type of the zwitterionic polymers on different inorganic/organic surfaces. The inherent hydrophilicity and salt affinity of the zwitterionic polymers endow the modified surfaces with antifouling, antibacterial and lubricating properties, thus the obtained zwitterionic surfaces show potential applications in biosystems. The zwitterionic polymer grafted membranes or stationary phases can effectively separate plasma, water/oil, ions, biomolecules and polar substrates. The nanomedicines with zwitterionic polymer shells have "stealth" effect in the delivery of encapsulated drugs, siRNA or therapeutic proteins. Moreover, the zwitterionic surfaces can be utilized as wound dressing, self-healing or oil extraction materials. The zwitterionic surfaces are expected as excellent support materials for biosensors, they are facing the severe challenges in the surface protection of marine facilities, and the dense ion pair layers may take unexpected role in shielding the grafted surfaces from strong electromagnetic field.

Strong Hydration at the Poly(ethylene glycol) Brush/Albumin Solution Interface

Albumin molecules are extensively used as biocompatible coatings, and poly(ethylene glycol) (PEG) materials are widely used for antifouling. PEG materials have excellent antifouling property because of their strong surface hydration. Our previous research indicates that hydration at the PEG/bovine serum albumin solution interface is stronger than that at the PEG/water interface. This research shows that this observation is general for different types of albumin molecules. Different albumins including bovine, porcine, rat, rabbit, and sheep serum albumins were studied in this research. It was found that the hydration at the PEG methacrylate (pOEGMA)/albumin solution interface is always stronger than that at the pOEGMA/water interface. Here, we define "strong interfacial hydration" as "ordered strongly hydrogen-bonded interfacial water". We believe that such a strong hydration is because of the strong hydration on the albumin surface, leading to its biocompatible property. All of the albumin molecules demonstrated stronger hydration on the pOEGMA surface compared to other protein molecules such as lysozyme and fibrinogen. The strong hydration on albumin molecules is related to the high surface coverage of glutamic acid and lysine with similar amounts.

Structure-function-dynamics of α-chymotrypsin based conjugates as a function of polymer charge

The field of protein-polymer conjugates has suffered from a lack of predictive tools and design guidelines to synthesize highly active and stable conjugates. In order to develop this type of information, structure-function-dynamics relationships must be understood. These relationships depend strongly on protein-polymer interactions and how these influence protein dynamics and conformations. Probing nanoscale interactions is experimentally difficult, but computational tools, such as molecular dynamics simulations, can easily obtain atomic resolution. Atomistic molecular dynamics simulations were used to study α-chymotrypsin (CT) densely conjugated with either zwitterionic, positively charged, or negatively charged polymers. Charged polymers interacted with the protein surface to varying degrees and in different regions of the polymer, depending on their flexibilities. Specific interactions of the negatively charged polymer with CT caused structural deformations in CT's substrate binding pocket and active site while no deformations were observed for zwitterionic and positively charged polymers. Attachment of polymers displaced water molecules from CT's surface into the polymer phase and polymer hydration correlated with the Hofmeister series.

Structure of water and polymer at the buried polymer/water interface unveiled using heterodyne-detected vibrational sum frequency generation

Heterodyne-detected vibrational sum frequency generation reveals the molecular-level structure of the polymer/water interface that is different from what has been argued.

Probing the Interfacial Interactions of Monoclonal and Bispecific Antibodies at the Silicone Oil-Aqueous Solution Interface by Using Sum Frequency Generation Vibrational Spectroscopy

Silicone oil has been widely utilized in the pharmaceutical industry especially as a lubricant coating commonly used in syringes for the smooth delivery of drugs. Protein structure perturbation and aggregation have been reported upon protein contacting silicone oil by using indirect methods and ex-situ techniques. The conclusions derived from such indirect and ex-situ methods may not truly reflect the exact nature of the protein-silicone oil interfacial interactions. Recently, we have successfully demonstrated that sum frequency generation (SFG) vibrational spectroscopy can be used as a powerful and direct method of studying the fusion protein-silicone oil interfacial interactions in situ and in real time. In this article, we studied monoclonal and bispecific antibody interactions with the silicone oil surface by using SFG spectroscopy. Being structurally and functionally different in the nature of fusion proteins and antibodies, this study is important in enhancing our current understanding of protein-silicone oil interfacial interactions. Both types of antibodies investigated here readily and strongly adsorb onto the silicone oil surface and remain stable at least for 10 h. SFG spectra in the amide I region for monoclonal and bispecific antibodies centered at 1660 and 1665 cm^-1, respectively, suggest the difference in their molecular structures. The absence of the antibody signals in the amide I region of time-dependent and static SFG spectra obtained for preadsorbed antibodies onto silicone oil after contacting polysorbate 80 (PS-80) surfactant suggests that PS-80 can effectively remove both types of antibodies from the silicone oil surface. This study demonstrated the feasibility of using SFG spectroscopy as a powerful tool for probing the antibody-interfacial interactions in situ and in real time.

Polymaleimide-Based Polysulfobetaines Bearing Functional and Nonfunctional Hydrophobic Units and Its Aggregation Behavior in Aqueous Media

Copolymaleimide-based zwitterionic polysulfobetaines (PM-SBs) were prepared by a "top down" method for the first time. Interfacial studies of these polymers showed many interesting characteristics. These PM-SBs did not require any salt in the form of sodium chloride (NaCl) to dissolve in water and exhibited exceptional salt tolerance. PM-SBs showed very mild thermogelling behavior. The viscosity of 5 wt % aqueous solution of polymers increased with increasing concentration of salt without showing any limits within the salt concentrations studied [200g/L of NaCl (3.4 M)] in contrast to other reported zwitterionic polysulfobetaines. Dynamic light scattering (DLS) studies also indicated a structure-dependent particle size with varying concentrations of NaCl solution. The uniformity of particles of 5 wt % aqueous solution of PM-SBs increased with increasing concentration of NaCl. At 0.1 wt % concentration, even in the absence of NaCl, mild aggregation was noticed. The concentration of aggregated particles increased with the increasing concentration of NaCl. Because of the exceptionally high salt tolerance, these polymers are potentially suitable for applications in antifouling, oil field, personal care formulations, and water purification.

Probing Surface Hydration and Molecular Structure of Zwitterionic and Polyacrylamide Hydrogels

A hydrogel is a hydrophilic cross-linked polymer network which can contain a large amount of water. Hydrogels with distinguished interfacial physical toughness were analyzed for their potential application as antifouling coating materials, utilizing sum frequency generation (SFG) spectroscopy as the interfacial analytical technique. The surface structures of one sulfobetaine (SBMA) zwitterionic hydrogel (ZWHG) and two polysaccharide hydrogels (PHGs) were probed in air; their interfacial structures with silica were examined using SFG in water and protein solutions, respectively. Both ZWHG and PHGs interfaces in water were dominated by strongly hydrogen-bonded water molecules, but the bonding strength associated with ZWHG was much stronger. Although all hydrogels experienced interfacial change in the presence of protein solutions, after cleaning, the zwitterionic hydrogel interface recovered almost completely while the other two hydrogels were subject to irreversible protein adsorption. Additionally, orientational analysis of ZWHG methyl groups in water was conducted and related to the superior hydrogen-bonding strength of water molecules at the ZWHG interface. The interfacial structures of hydrogel materials probed by SFG can be correlated to their antifouling properties. This research highlighted the critical role that hydrogen-bonding strength of interfacial water molecules play for antifouling applications.