Measuring the Interactions between Protein-Coated Microspheres and Polymer Brushes in Aqueous Solutions

Unravelling Surface Modification Strategies for Preventing Medical Device-Induced Thrombosis

The use of biomaterials in implanted medical devices remains hampered by platelet adhesion and blood coagulation. Thrombus formation is a prevalent cause of failure of these blood-contacting devices. Although systemic anticoagulant can be used to support materials and devices with poor blood compatibility, its negative effects such as an increased chance of bleeding, make materials with superior hemocompatibility extremely attractive, especially for long-term applications. This review examines blood-surface interactions, the pathogenesis of clotting on blood-contacting medical devices, popular surface modification techniques, mechanisms of action of anticoagulant coatings, and discusses future directions in biomaterial research for preventing thrombosis. In addition, this paper comprehensively reviews several novel methods that either entirely prevent interaction between material surfaces and blood components or regulate the reaction of the coagulation cascade, thrombocytes, and leukocytes.

Total internal reflection microscopy: a powerful tool for exploring interactions and dynamics near interfaces

The occurrence of many micro/macrophenomena is closely related to interactions and dynamics near interfaces. Hence, developing powerful tools for characterizing near-interface interactions and dynamics has attached great importance among researchers. In this review, we introduce a noninvasive and ultrasensitive technique called total internal reflection microscopy (TIRM). The principles of TIRM are introduced first, demonstrating the characteristics of this technique. Then, typical measurements with TIRM and the recent development of the technique are reviewed in detail. At the end of the review, we highlight the great progress of TIRM during the past several decades and show its potential to be more influential in measuring interactions and dynamics near interfaces in various research fields.

Mini-Review of Biofilm Interactions with Surface Materials in Industrial Piping System

The growth of biofilm, which is caused by microorganism accumulation and growth on wetted surfaces, may damage industrial piping systems, increase maintenance and cleaning costs for the system sterilization, and even divulge the immune system into high risk. This article systematically analyzes the biofilm interactions with piping surface materials from the perspectives of physical convection, and biological and chemical adhesion. The thermodynamics of the flow, bacterial surface sensing, and bio-communication are the most critical factors for biofilm attachment. Furthermore, experimental analysis methods as well as biofilm control and removal approaches, are also included in this study. Finally, the resistance and growth of biofilm, as well as the practical and advanced methodology to control the biofilm and challenges associated with technology, are also discussed. Moreover, this paper may also offer a significant reference for the practice and strategic applications to address the biofilm resistance issues in industrial piping.

Prediction of Serum Adsorption onto Polymer Brush Films by Machine Learning

Using machine learning based on a random forest (RF) regression algorithm, we attempted to predict the amount of adsorbed serum protein on polymer brush films from the films' physicochemical information and the monomers' chemical structures constituting the films using a RF model. After the training of the RF model using the data of polymer brush films synthesized from five different types of monomers, the model became capable of predicting the amount of adsorbed protein from the chemical structure, physicochemical properties of monomer molecules, and structural parameters (density and thickness of the films). The analysis of the trained RF quantitatively provided the importance of each structural parameter and physicochemical properties of monomers toward serum protein adsorption (SPA). The ranking for the significance of the parameters agrees with our general understanding and perception. Based on the results, we discuss the correlation between brush film's physical properties (such as thickness and density) and SPA and attempt to provide a guideline for the design of antibiofouling polymer brush films.

Measurements of interactions between fluorescent molecules and polyethylene glycol self-assembled monolayers

Blocking the non-specific binding of fluorescent biomolecules to substrates is one of the most important approaches to minimize the background noise in single-molecule fluorescence detection. Polyethylene glycol (PEG) and its derivatives are the most frequently used self-assembled monolayers (SAMs) for surface passivation because they are particularly effective to reduce the adsorption of a majority of biomolecules. Most studies related to PEG SAMs focus only on the interactions between biomolecules and substrates, while few reports exist in which the interactions between fluorophores and organosilane SAMs are directly examined. The objective of this study is to try to clarify the interactions between fluorescein isothiocyanate (FITC) and PEG SAMs at different ionic strengths. Total internal reflection microscopy (TIRM) was utilized for quantitative analysis of the interactions. At low ionic strength, long-range attractions between FITC-modified polystyrene-silica particles and PEG SAM grafting substrates were observed, even though both of them had an ensemble-averaged negative charge. The origin of this attraction could be correlated to their nonuniformly charged surfaces. At high ionic strength, van der Waals attraction at short distances was measured as the electrostatic interactions were completely screened. Due to the polarizability of the FITC molecule, the van der Waals attractions increased with the thickness of the PEG SAMs. This phenomenon is explained by the hydration shell of the PEG SAMs.

Control of Blood Coagulation by Hemocompatible Material Surfaces-A Review

Hemocompatibility of biomaterials in contact with the blood of patients is a prerequisite for the short- and long-term applications of medical devices such as cardiovascular stents, artificial heart valves, ventricular assist devices, catheters, blood linings and extracorporeal devices such as artificial kidneys (hemodialysis), extracorporeal membrane oxygenation (ECMO) and cardiopulmonary bypass. Although lower blood compatibility of materials and devices can be handled with systemic anticoagulation, its side effects, such as an increased bleeding risk, make materials that have a better hemocompatibility highly desirable, particularly in long-term applications. This review provides a short overview on the basic mechanisms of blood coagulation including plasmatic coagulation and blood platelets, as well as the activation of the complement system. Furthermore, a survey on concepts for tailoring the blood response of biomaterials to improve the hemocompatibility of medical devices is given which covers different approaches that either inhibit interaction of material surfaces with blood components completely or control the response of the coagulation system, blood platelets and leukocytes.

Mechanical properties of temperature-responsive gels containing ethylene glycol in their side chains

The mechanical properties of temperature-responsive and biocompatible poly(oligo-ethylene glycol methyl ether methacrylate)-based gels were investigated using dynamic viscoelasticity measurements so as to find applications in tissue and biomedical engineering. The gels were copolymerized using two ethylene glycol methacrylate monomers with diethylene glycol side chains: diethylene glycol methacrylate (MeO₂MA), which contains two ethylene oxide units, and oligo-ethylene glycol methyl ether methacrylate (OEGMA) with either four or five ethylene oxide units. The storage (G') and loss (G'') moduli of these gels exhibit unique temperature-responsive behavior and depend on the copolymerization ratio. In MeO₂MA-rich gels, phase separation occurred with increasing temperature, resulting in a significant increase in G' and the disappearance of the frequency dependence of G''. Although phase separation of OEGMA-rich gels was also observed with increasing temperature, it resulted in only a slight increase in the storage modulus due to the steric hindrance of the side chain. The mechanical properties of these gels are thus found to be strongly affected by a slight difference in the number of ethylene oxide groups in their side chains.

Measurements of Particle-Surface Interactions in Both Equilibrium and Nonequilibrium Systems

Total internal reflection microscopy (TIRM) is a passive technique that measures colloidal interactions in aqueous solution. A traditional Boltzmann method requires that particles must fluctuate around equilibrium positions for a long time. A method based on multiparticle tracking and drift velocity method was developed to measure interactions in both equilibrium and nonequilibrium systems. This method relaxed the limitation of the traditional Boltzmann method and do not require any external force like optical tweezer. Theoretical predictions of particle sedimentation under the influence of various forces were investigated to determine the proper particle size and solution properties. We found that the polystyrene (PS) particle with a size of 2.1 μm took the longest time to finish sedimentation, and 5% (w/w) sucrose was chosen to suppress the Brownian motion. For single and ensemble particles in equilibrium, the experimental diffusion coefficients and potential energy profiles were consistent with the theoretical prediction. In nonequilibrium experiments, the van der Waals force between the bare/hybrid particles and flat surface was measured, and the silica shell acted to strengthen the van der Waals attraction. This method extends the application of TIRM to nonequilibrium systems without any active control. Moreover, the silica-coated PS core-shell hybrid particles facilitate surface modification with a variety of active chemicals. It would be a great advantage to measure all kinds of long-range interactions between surface-modified particles and surface in aqueous solution with TIRM.