Adsorption of Native Amino Acids on Nanocrystalline TiO2: Physical Chemistry, QSPR, and Theoretical Modeling

Label-free colorimetric analysis strategies based on adsorption-responsive surface-enhanced photochromic phenomena of tungsten(VI) oxide nanoparticles for amino acids

Herein, we present a colorimetric detection method based on the surface-enhanced photochromic phenomenon of tungsten (VI) oxide (WO3) nanocolloid particles for α-amino acid (AA) molecules, including L-aspartic acid (Asp), L-glutamic acid (Glu), L-histidine (His), L-isoleucine (Ile), L-leucine (Leu), L-lysine (Lys), L-phenylalanine (Phe), and L-valine (Val). The UV-induced photochromic phenomena in the AA/WO3 binary aqueous systems were investigated using UV-Vis absorption spectrometry. The adsorption properties of the AA molecules on the surface of the WO3 nanocolloid particles have been identified using a combination of adsorption isotherm analysis and attenuated total reflection Fourier transform infrared (ATR-FTIR) spectroscopy. A good linear correlation between the concentration of the AAs adsorbed on the surface of the WO3 nanocolloid particles and the initial photochromic coloration rate in the corresponding UV-irradiated WO3 colloidal aqueous solution was obtained with over three orders of magnitude, indicating that the surface-enhanced photochromic phenomenon of the WO3 nanocolloid particle can be used to detect the AA molecules. In addition, based on the results of the UV-Vis absorption, ATR-FTIR, and adsorption isotherm analyses, we have experimentally demonstrated that the AA/WO3 binary aqueous system with inner-sphere adsorbed Ile, Leu, Lys, or Val molecules on the surface of the WO3 nanocolloid particles exhibits a more significant surface-enhanced photochromic phenomenon than the system with outer-sphere adsorbed Asp, Glu, His, or Phe molecules. The strong inner-sphere adsorption of the AA molecules successfully improved the limit of detection. This study provides valuable insights into a "label-free" colorimetric assay system based on the surface-enhanced photochromic phenomenon of the WO3 nanocolloid probe.

Adsorption of Glycine on TiO2 in Water from On-the-fly Free-Energy Calculations and In Situ Electrochemical Impedance Spectroscopy

We report here an experimental-computational study of hydrated TiO2 anatase nanoparticles interacting with glycine, where we obtain quantitative agreement of the measured adsorption free energies. Ab initio simulations are performed within the tight binding and density functional theory in combination with enhanced free-energy sampling techniques, which exploit the thermodynamic integration of the unbiased mean forces collected on-the-fly along the molecular dynamics trajectories. The experiments adopt a new and efficient setup for electrochemical impedance spectroscopy measurements based on portable screen-printed gold electrodes, which allows fast and in situ signal assessment. The measured adsorption free energy is -30 kJ/mol (both from experiment and calculation), with preferential interaction of the charged NH3+ group which strongly adsorbs on the TiO2 bridging oxygens. This highlights the importance of the terminal amino groups in the adsorption mechanism of amino acids on hydrated metal oxides. The excellent agreement between computation and experiment for this amino acid opens the doors to the exploration of the interaction free energies for other moderately complex bionano systems.

Energy Landscape of Relaxation and Interaction of an Amino Acid, Glutamine (L), on Pristine and Au/Ag/Cu-Doped TiO2 Surfaces

Studying the interaction of inorganic systems with organic ones is a highly important avenue for finding new drugs and treatment methods. Tumor cells show an increased demand for amino acids due to their rapid proliferation; thus, targeting their metabolism is becoming a potential oncological therapeutic strategy. One of the inorganic materials that show antitumor properties is titanium dioxide, while its doping was found to enhance interactions with biological systems. Thus, in this study, we investigated the energy landscape of glutamine (L), an amino acid, on pristine and doped TiO2 surfaces. We first locally optimized 2D-slab structures of pristine and Au/Ag/Cu-doped anatase (001 and 101 surfaces) and similarly optimized a single molecule of glutamine in vacuum. Next, we placed the pre-optimized glutamine molecule in various orientations and on a variety of locations onto the relaxed substrate surfaces (in vacuum) and performed ab initio relaxations of the molecule on the substrate slabs. We employed the DFT method with a GGA-PBE functional implemented in the Quantum Espresso code. Comparisons of the optimized conformations and electronic structures of the amino acid in vacuum and on the surfaces yield useful insights into various biological processes.

Functional nano-systems for transdermal drug delivery and skin therapy

Transdermal drug delivery is one of the least intrusive and patient-friendly ways for therapeutic agent administration. Recently, functional nano-systems have been demonstrated as one of the most promising strategies to treat skin diseases by improving drug penetration across the skin barrier and achieving therapeutically effective drug concentrations in the target cutaneous tissues. Here, a brief review of functional nano-systems for promoting transdermal drug delivery is presented. The fundamentals of transdermal delivery, including skin biology and penetration routes, are introduced. The characteristics of functional nano-systems for facilitating transdermal drug delivery are elucidated. Moreover, the fabrication of various types of functional transdermal nano-systems is systematically presented. Multiple techniques for evaluating the transdermal capacities of nano-systems are illustrated. Finally, the advances in the applications of functional transdermal nano-systems for treating different skin diseases are summarized.

[Advances in separation and analysis of aromatic amino acids in food]

Amino acids are important building blocks of proteins in the human body, which are involved in many metabolic pathways. Patients with metabolic diseases such as phenylketonuria, tyrosinemia, and hepatic encephalopathy are genetically defective and cannot metabolize aromatic amino acids (AAA) in food; hence, a regular diet may lead to permanent physiological damage. For this reason, it is necessary to restrict the intake of AAA in their daily diet by limiting natural protein intake, while ensuring normal intake of low protein foods and supplementation with low-AAA protein equivalents. Sources of low-AAA protein equivalents currently rely on free amino acid complex mixtures and low-AAA peptides (also known as high-Fischer-ratio peptides), which have better absorption availability and palatability. AAA separation and analysis techniques are essential for the preparation and detection of low-AAA peptides. Researchers in this field have explored a variety of efficient adsorption materials to selectively remove AAA from complex protein hydrolysates and thus prepare low-AAA peptide foods, or to establish analysis strategies for AAA. Covering more than 70 publications on AAA removal and separation in the last decade from Web of Science Core Collection and China National Knowledge Infrastructure, this review analyzes the structural characteristics and physicochemical properties of AAA, and summarizes the technological progress of AAA removal based on adsorbents such as activated carbon and resin. The applications of two-dimensional nanomaterials, molecular imprinting, cyclodextrins, and metal-organic frameworks in AAA adsorption and analysis from three dimensions, i. e., sample pretreatment, chiral separation and adsorption sensing, are also reviewed. The mainstream adsorbents for AAA removal, such as activated carbon, still suffer from poor specificity and cause environmental pollution during post-use treatment. Existing AAA separating materials show impressive selective adsorption capability in food samples and chiral mixtures as well as high sensitivity in adsorption sensing. The development of an efficient detection technology for AAA may help in detecting trace AAA in food and in evaluating chiral AAA adulteration in food samples. By exploring the advantages and disadvantages of each type of technology, we provide support for the advancement of the removal and analysis techniques for AAA.

Probing Adsorption of Dipeptides on Anatase in H2 O and D2 O: Thermodynamics and Molecular Geometry

Considering the vast importance of peptide and protein interactions with inorganic surfaces, probing hydrogen bonding during their adsorption on metal oxide surfaces is a relevant task that could shed light on the essential features of their interplay. This work is devoted to studying the dipeptides' adsorption on anatase nanoparticles (ANs) in light and heavy water to reveal differences arising upon the change of the major hydrogen bonding carrier. Thermodynamic study of six native dipeptides' adsorption on ANs in both media shows a strong influence of the solvent on the Gibbs free energy and the effect of side-chain mobile protons on the entropy of the process. The adsorption is endothermic irrespective of the medium and is entropy-driven. Computer simulations of peptide adsorption in both media shows similarity in binding via an amino group and demonstrates structural features of protonated and deuterated peptides in obtained complexes. Calculated peptide- anatase nanoparticle (AN) descriptors indicate surface oxygens as points of peptide-nanoparticle contacts.

Molecular dynamics simulations of amino acid adsorption and transport at the acetonitrile–water–silica interface: the role of side chains

The solvation and transport of amino acid residues at liquid–solid interfaces have great importance for understanding the mechanism of separation of biomolecules in liquid chromatography. This study uses umbrella sampling molecular dynamics simulations to study the adsorption and transport of three amino acid molecules with different side chains (phenylalanine (Phe), leucine (Leu) and glutamine (Gln)) at the silica–water–acetonitrile interface in liquid chromatography. Free energy analysis shows that the Gln molecule has stronger binding affinity than the other two molecules, indicating the side chain polarity may play a primary role in adsorption at the liquid–solid interface. The Phe molecule with a phenyl side chain exhibits stronger adsorption free energy than Leu with a non-polar side chain, which can be ascribed to the better solvated configuration of Phe. Further analysis of molecular orientations found that the amino acid molecules with apolar side chains (Phe and Leu) have ‘standing up’ configurations at their stable adsorption state, where the polar functional groups are close to the interface and the side chain is far from the interface, whereas the amino acid molecule with a polar side chain (Gln) chooses the ‘lying’ configuration, and undergoes a sharp orientation transition when the molecule moves away from the silica surface. Extending our simulation studies to systems with different solute concentrations reveals that there is a decrease in the adsorption free energy as well as surface diffusion as the solute concentration increases, which is related to the crowding in the interfacial layers. This simulation study gives a detailed microscopic description of amino acid molecule solvation and transport at the acetonitrile–water–silica interface in liquid chromatography and will be helpful for understanding the retention mechanism for amino acid separation.

The solvation and transport of amino acid residues at liquid–solid interfaces have great importance for understanding the mechanism of separation of biomolecules in liquid chromatography.

Studies of Dynamic Binding of Amino Acids to TiO2 Nanoparticle Surfaces by Solution NMR and Molecular Dynamics Simulations

Adsorption of biomolecules onto material surfaces involves a potentially complex mechanism where molecular species interact to varying degrees with a heterogeneous material surface. Surface adsorption studies by atomic force microscopy, sum frequency generation spectroscopy, and solid-state NMR detect the structures and interactions of biomolecular species that are bound to material surfaces, which, in the absence of a solid-liquid interface, do not exchange rapidly between surface-bound forms and free molecular species in bulk solution. Solution NMR has the potential to complement these techniques by detecting and studying transiently bound biomolecules at the liquid-solid interface. Herein, we show that dark-state exchange saturation transfer (DEST) NMR experiments on gel-stabilized TiO₂ nanoparticle (NP) samples detect several forms of biomolecular adsorption onto titanium(IV) oxide surfaces. Specifically, we use the DEST approach to study the interaction of amino acids arginine (Arg), lysine (Lys), leucine (Leu), alanine (Ala), and aspartic acid (Asp) with TiO₂ rutile NP surfaces. Whereas Leu, Ala, and Asp display only a single weakly interacting form in the presence of TiO₂ NPs, Arg and Lys displayed at least two distinct bound forms: a species that is surface bound and retains a degree of reorientational motion and a second more tightly bound form characterized by broadened DEST profiles upon the addition of TiO₂ NPs. Molecular dynamics simulations indicate different surface bound states for both Lys and Arg depending on the degree of TiO₂ surface hydroxylation but only a single bound state for Asp regardless of the degree of surface hydroxylation, in agreement with results obtained from the analysis of DEST profiles.

Microfluidic-mediated nano-drug delivery systems: from fundamentals to fabrication for advanced therapeutic applications

Nano-drug delivery systems (NDDS) are functional drug-loaded nanocarriers extensively applied in the healthcare and pharmaceutical areas. Recently, microfluidics has been demonstrated as one of the most promising techniques to fabricate high-performance NDDS with uniform morphology, size and size distribution, reduced batch-to-batch variations and controllable drug delivering capacity. Here, a brief review of the microfluidic-mediated NDDS is presented. The fundamentals of microfluidics are first interpreted with an emphasis on the fluid characteristics, design and materials for microfluidic devices. Then a comprehensive and in-depth depiction of the microfluidic-mediated fabrications of controllable NDDS with well-tailored internal structures and integrated functions for controlled encapsulation and drug release are categorized and reviewed, with particular descriptions about the underlying formation mechanisms. Afterwards, recently appreciated representative applications of the microfluidic-mediated NDDS for delivering multiple drugs are systematically summarized. Finally, conclusions and perspectives on further advancing the microfluidic-mediated NDDS toward more powerful and versatile platforms for therapeutic applications are discussed.

On interaction of arginine, cysteine and guanine with a nano-TiO2 cluster

Nanoscopic properties of TiO₂ augmented with its physicochemical properties and biocompatibility make it a material interest in the biomedical field. Efficient methods to design of such materials require a thorough understanding of associated nano-bio interfaces. In the present study, density functional theory calculations were performed to study the interactions of arginine, cysteine and guanine with a nano-TiO₂ cluster. Different configurations were sampled for the adsorption of arginine, cysteine and guanine to probe the nano-bio interface via the interaction of various functional groups present on biomolecules. Adsorption energies for arginine, cysteine and guanine were in a range of -25.0 to -57.6, -12.1 to -29.6 and -45.6 to -58.7 kcal/mol, respectively. From the change in adsorption energies and free energies, interaction of amino acids with carboxylic (COOH), thiol (SH) and amine (NH₂) groups while the interaction of the nucleobase via O bonded to C and N of purine ring was found to be essential for thermodynamically stable and energetically favorable states. Density of states analysis also disclosed the prominent interactions of the biomolecules with the nano-TiO₂ cluster. Decrease in band gaps on adsorption of the biomolecules was a pertinent phenomenon indicating the strong chemical interactions of the biomolecules with the nanoscopic TiO₂ chosen for analysis in this study.

Improved Sampling in Ab Initio Free Energy Calculations of Biomolecules at Solid–Liquid Interfaces: Tight-Binding Assessment of Charged Amino Acids on TiO2 Anatase (101)

Atomistic simulations can complement the scarce experimental data on free energies of molecules at bio-inorganic interfaces. In molecular simulations, adsorption free energy landscapes are efficiently explored with advanced sampling methods, but classical dynamics is unable to capture charge transfer and polarization at the solid–liquid interface. Ab initio simulations do not suffer from this flaw, but only at the expense of an overwhelming computational cost. Here, we introduce a protocol for adsorption free energy calculations that improves sampling on the timescales relevant to ab initio simulations. As a case study, we calculate adsorption free energies of the charged amino acids Lysine and Aspartate on the fully hydrated anatase (101) TiO2 surface using tight-binding forces. We find that the first-principle description of the system significantly contributes to the adsorption free energies, which is overlooked by calculations with previous methods.

Theoretical study of the surface structure of anatase nanoparticles: effect on dye adsorption and photovoltaic properties

The properties of TiO₂ can vary greatly, depending on the size and morphology of the particles used.