Photoinduced Reconfiguration of Complex Emulsions Using a Photoresponsive Surfactant

Controllable enzymatic hydrolysis in reverse Janus emulsion microreactors

HYPOTHESIS

The key feature of living cells is multicompartmentalization for enzymatic reactions. Artificial cell-like multicompartments with micro domains are appealing to mimic the biological counterparts. In addition, establishing a sustainable, efficient, and controllable reaction system for enzymatic hydrolysis is imperative for the production of natural fatty acids from animal and plant-based fats.

EXPERIMENTS

Reverse Janus emulsion microreactors, i.e. (W1 + W2)/O, is constructed through directly using natural fats as continuous phase and aqueous two-phase solutions (ATPS) as inner phases. Enzyme is confined in the compartmented aqueous droplets dominated by the salt of Na2SO4 and polyethylene glycol (PEG). Enzyme catalyzed ester hydrolysis employed as a model reaction is performed under the conditions of agitation-free and mild temperature. Regulation of reaction kinetics is investigated by diverse droplet topology, composition of inner ATPS, and on-demand emulsification.

FINDINGS

Excellent enzymatic activity toward hydrolysis of plant and animal oils achieves 88.5 % conversion after 3 h. Compartmented micro domains contribute to condense and organize the enzymes spatially. Timely removal of the products away from reaction sites of oil/water interface "pushed" the reaction forward. Distribution and transfer of enzyme in two aqueous lobes provide extra freedom in the regulation of hydrolysis kinetics, with equilibrium conversion controlled freely from 14.5 % to 88.5 %. Reversible "open" and "shut" of hydrolysis is acheived by on-demand emulsification and spontaneous demulsification. This paper paves the way to advancing progress in compartmentalized emulsion as a sustainable and high-efficiency platform for biocatalytic applications.

In situ Tracking of Exoenzyme Activity Using Droplet Luminescence Concentrators for Ratiometric Detection of Bacteria

We demonstrate a novel, rapid, and cost-effective biosensing paradigm that is based on an in situ visualization of bacterial exoenzyme activity using biphasic Janus emulsion droplets. Sensitization of the droplets toward dominant extracellular enzymes of bacterial pathogens is realized via selective functionalization of one hemisphere of Janus droplets with enzyme-cleavable surfactants. Surfactant cleavage results in an interfacial tension increase at the respective droplet interface, which readily transduces into a microscopically detectable change of the internal droplet morphologies. A macroscopic fluorescence read-out of such morphological transitions is obtained via ratiometrically recording the angle-dependent anisotropic emission signatures of perylene-containing droplets from two different angles. The optical read-out method facilitates detection of marginal morphological responses of polydisperse droplet samples that can be easily produced in any environment. The performance of Janus droplets as powerful optical transducers and signal amplifiers is highlighted by rapid (<4 h) and cost-effective antibody and DNA-free identification of three major foodborne pathogens, with detection thresholds of below 10 CFU mL-1 for Salmonella and <102 to 103 CFU mL-1 for Listeria and Escherichia coli.

Multiplexed and continuous microfluidic sensors using dynamic complex droplets

Emissive complex droplets with reconfigurable morphology and dynamic optical properties offer exciting opportunities as chemical sensors due to their stimuli-responsive characteristics. In this work, we demonstrated a real-time optical sensing platform that combines poly(dimethylsiloxane) (PDMS) microfluidics and complex droplets as sensing materials. We utilized a mechanism, called directional emission, to transduce changes in interfacial tension into optical signals. We discuss the fabrication and integration of PDMS microfluidics with complex emulsions to facilitate continuous measurement of fluorescent emission and, ultimately, the interfacial tensions. Furthermore, by varying the interfacial functionalization and fluorescent dye with characteristic wavelength, we generate multiple formulations of droplets and obtain differential responses to stimuli that alter interfacial tensions (i.e., composition of surfactants, pH). Our results illustrate a proof-of-concept multiplexed and continuous sensing platform with potential applications in miniaturized, on-site environmental monitoring and biosensing.

Dynamic In Situ Monitoring of the Salt Counter-ion Effect on Surfactant Effectiveness Using Reconfigurable Janus Emulsions

A straightforward method for visualization and quantification of surfactant effectiveness within different electrolyte environments based on using reconfigurable Janus emulsions as novel optical probes is reported. More specifically, we investigated the effect of different types and concentrations of salt counter-ions on the surfactant surface excess of commercial ionic and non-ionic surfactants, namely sodium dodecyl sulfate (SDS) and Tween 80 via in situ monitoring the morphological reconfigurations of biphasic Janus emulsions comprising hydrocarbon and fluorocarbon oils. We find that significant variations in interfacial tensions of SDS-stabilized interfaces (up to 15 mN·m^-1) can be evoked by titrating mono-, di-, and trivalent cationic counter-ions, which is coherent with the lyotropic (Hofmeister) series. In contrast, the salt counter-ion effect on the surfactant effectiveness was less pronounced for the non-ionic surfactant Tween 80 (∼3 mN·m^-1). Our results reveal a facile in situ method for monitoring the central role of electrolyte type and concentration on surfactant effectiveness and, more broadly, illustrate that Janus emulsions serve as powerful optical probes to dynamically study the properties of surfactants at liquid interfaces. We demonstrate the utility of our findings for an electro-induced morphological reconfiguration of Janus droplet morphologies by dynamically tuning Cu²⁺ concentration in solution using an electrode setup. The latter provides a unique platform for liquid-phase, real-time, and continuous tuning of Janus droplet morphologies, e.g., for their application in sensing and dynamic optical device platforms.

Recent Progress toward Physical Stimuli-Responsive Emulsions

Emulsion as a fine dispersion of immiscible liquids has involved widespread applications in industry, pharmaceuticals, agriculture and personal care. Stimuli-responsive emulsions capable of on-demand demulsification or changing their properties are required in many cases such as controllable release cargo, oil recovery, emulsifiers recycle and product separation, great progress has been achieved in these areas. Among these various triggers, much effort has been made to develop physical stimuli, due to the noninvasive and environmentally friendly characteristics. Physical stimuli-responsive emulsions provide a plenty of valuable practical applications in the fields of sustainable industry, biomedical reaction, drug delivery. Here, we summarize the recent development in the field of emulsions in response to physical stimuli consisting of temperature, light, magnetic field, electrical field, etc. The preparation methods and mechanisms of physical stimuli-responsive emulsions and their applications of catalysis reaction, drug delivery, and oil recovery are highlighted in this review. The future directions and outstanding problems of the physical stimuli-responsive emulsions are also discussed. This article is protected by copyright. All rights reserved.

Reversible morphology-resolved chemotactic actuation and motion of Janus emulsion droplets

We report, for the first time, a chemotactic motion of emulsion droplets that can be controllably and reversibly altered. Our approach is based on using biphasic Janus emulsion droplets, where each phase responds differently to chemically induced interfacial tension gradients. By permanently breaking the symmetry of the droplets’ geometry and composition, externally evoked gradients in surfactant concentration or effectiveness induce anisotropic Marangoni-type fluid flows adjacent to each of the two different exposed interfaces. Regulation of the competitive fluid convections then enables a controllable alteration of the speed and the direction of the droplets’ chemotactic motion. Our findings provide insight into how compositional anisotropy can affect the chemotactic behavior of purely liquid-based microswimmers. This has implications for the design of smart and adaptive soft microrobots that can autonomously regulate their response to changes in their chemical environment by chemotactically moving towards or away from a certain target, such as a bacterium.

Artificial microswimmers can emulate the autonomous regulation of chemotactic motility of living organisms. Frank et al. realize a chemotactic locomotion of emulsion droplets, composed of two phase-separated fluids, that can be reversibly directed up or down a chemical concentration gradient.

Facile Monitoring of Water Hardness Levels Using Responsive Complex Emulsions

The cationic content of water represents a major quality control parameter that needs to be followed by a rapid, on-site, and low-cost method. Herein, we report a novel method for a facile monitoring of the mineral content of drinking water by making use of responsive complex emulsions. The morphology of biphasic oil-in-water droplets solely depends on the balance of interfacial tensions, and we demonstrate that changes in the surfactant effectiveness, caused by variations in the mineral content inside the continuous phase, can be visualized by monitoring internal droplet shapes. An addition of metal cations can significantly influence the surfactant critical micelle concentrations and the surface excess values and therefore induce changes in the effectiveness of ionic surfactants, such as sodium dodecyl sulfate. The morphological response of Janus emulsions droplets was tracked via a simple microscopic setup. We observed that the extent of the droplet response was dependent on the salt concentration and valency, with divalent cations (responsive for water hardness), resulting in a more pronounced response. In this way, Ca²⁺ and Mg²⁺ levels could be quantitatively measured, which we showcased by determination of the mineral content of commercial water samples. The herein demonstrated device concept may provide a new alternative rapid monitoring of water hardness levels in a simple and cost-effective setup.

Exploring New Horizons in Liquid Compartmentalization via Microfluidics

Spatial organization of cellular processes is crucial to efficiently regulate life's essential reactions. Nature does this by compartmentalization, either using membranes, such as the cell and nuclear membrane, or by liquid-like droplets formed by aqueous liquid-liquid phase separation. Aqueous liquid-liquid phase separation can be divided in two different phenomena, associative and segregative phase separation, of which both are studied for their membraneless compartmentalization abilities. For centuries, segregative phase separation has been used for the extraction and purification of biomolecules. With the emergence of microfluidic techniques, further exciting possibilities were explored because of their ability to fine-tune phase separation within emulsions of various compositions and morphologies and achieve one of the simplest forms of compartmentalization. Lately, interest in aqueous liquid-liquid phase separation has been revived due to the discovery of membraneless phases within the cell. In this Perspective we focus on segregative aqueous phase separation, discuss the theory of this interesting phenomenon, and give an overview of the evolution of aqueous phase separation in microfluidics.

Responsive drop method: quantitative in situ determination of surfactant effectiveness using reconfigurable Janus emulsions

Characterization of surfactant effectiveness and thus an evaluation of their performance in a wide range of emulsion technologies requires a precise determination of key parameters including their critical micelle concentrations as well as their ability to lower the surface tension at interfaces. In this study, we describe a new approach to quantify marginal variations in interfacial tension of surfactant stabilized fluid interfaces. The method is based on a unique chemical-morphological coupling inside bi-phasic oil-in-water Janus emulsions that undergo dynamic morphological transitions in response to changes in the surfactant type, concentration, ratio, and configuration. Variations in Janus droplet morphologies are readily monitored in situ using a simple side-view imaging setup, resulting in a fast, convenient, cost-effective, time-, and sample-saving technique for the characterization of classical surfactant systems. In addition, the reported method facilitates monitoring of triggered changes in surfactant effectiveness, e.g. invoked by external triggers, and thus proves particularly useful for the in situ analysis of stimuli-responsive surfactants and emulsions.

Temperature and composition induced morphology transition of Cerberus emulsion droplets

HYPOTHESIS

Various advanced geometries are endowed by the unique structure of "three rooms" of immiscible oils composing the Cerberus droplets. Adjustable interfacial properties and tunable volume ratio in the four-liquid system render it possible to realize the controlled morphology transition by the variation of temperature and emulsion composition.

EXPERIMENTS

Cerberus emulsions are prepared in batch scale by traditional one-step vortex mixing, employing the oil combinations of methacryloxypropyl dimethyl silicone (DMS)/2-(perfluorooctyl) ethyl methacrylate (PFOEMA)/vegetable oil (VO). Emulsifier of pluoronic F127, a temperature sensitive surfactant is applied. Stereoscopic topological phase diagram as functions of temperature and composition are plotted. Numerical calculations on the droplet morphology including interface curvature, contact angle, and volume fraction of each domain are performed.

FINDINGS

Four primary regions with specific morphologies, i.e. "VO > DMS < PFOEMA", "VO > DMS > PFOEMA", "VO < DMS > PFOEMA", and finally "VO < DMS < PFOEMA" are obtained. Extended volume ratio range of three lobes, from about 0.03 to 23.3, is achieved and precisely controlled based on the three-phase diagram. What is more, the structural features are found to be thermodynamically determined by the minimization of interfacial energy, though the emulsion is prepared kinetically by vortex mixing. The findings are attractive in the fields of materials synthesis and microreactors.

Confinement-Induced Alteration of Morphologies of Oil-Water Emulsions

Reversible alteration between different emulsion morphologies like core-shell and Janus is conventionally triggered by altering the interfacial energy between different phases. In contrast, here, we show that the morphology of dispersed droplets can be changed also when the emulsion is sufficiently confined between two parallel plates. In particular, we use three immiscible phases: silicone oil, paraffin oil, and aqueous solution of surface-active agents like agarose, sodium dodecylsulfate, dioctyl sodium sulfosuccinate, and cetyl trimethylammonium bromide to generate oil-in-water emulsions consisting of complex morphologies of the dispersed droplets. In the unconfined state, the core-shell drops appear with paraffin oil at the core and silicone oil at the shell. However, the morphology of oil droplets changes to Janus when the emulsion is confined between two parallel plates. We have shown that the meniscus of the continuous phase that forms between the parallel plates alters the pressure field in the emulsion and the total energy of the system, which trigger such morphological transition.