Encapsulation of AgNPs within Zwitterionic Hydrogels for Highly Efficient and Antifouling Catalysis in Biological Environments

Hybrid Nanoparticle-Hydrogel Systems for Drug Delivery Depots and Other Biomedical Applications

Hydrogel-based depots typically tend to remain where injected and have excellent biocompatibility but are relatively poor at controlling drug release. Nanoparticles (NPs) typically have the opposite properties. The smaller the NPs are, the more likely they are to leave the site of injection. Their biocompatibility is variable depending on the material but can be poor. However, NPs can be good at controlling drug release. In these and other properties, combining NPs and hydrogels can leverage their advantages and negate their disadvantages. This review highlights the rationale for hybrid NP-hydrogel systems in drug delivery, the basic methods of producing them, and examples where combining the two systems addressed specific problems.

Enhanced Stability and Catalytic Activity of a Nanocatalyst with Reusable Ionic Liquid Hydrogels for the Reduction of Organic Pollutants

Nitroaromatic compounds have a wide range of applications. However, they pose a significant threat to both the environment and human health. Ionic liquid hydrogels (ILs-gels) have emerged as a cost-effective and environmentally friendly option for various applications. However, conventional ILs-gels are known to possess mechanical flaws or defects. The procedure utilized a facile synthesis route that involved the polymerization of acrylamide (AM) and ionic liquids (ILs) to create a novel candidate for nanoparticle absorption. This study resolved this issue by creating toughened hydrophobic combined hydrogels synthesized through the addition of SiO2@poly(butyl acrylate) core-shell inorganic-organic hybrid latex particles (SiO2@PBA) to the AM-ILs mixture. The SiO2@PBA particles were chosen to provide the hydrogels with exceptional stretchability (up to 4050% strain) and high mechanical properties (tensile strength of 126 kPa) by acting as both a nanotoughener and a cross-linking point for hydrophobic linkage. Additionally, the P(AM/ILs)-SiO2@PBA hydrogel served as a template for the in situ and stable formation of palladium (Pd) nanoparticles. By incorporation of these Pd nanoparticles as catalysts into P(AM/ILs)-SiO2@PBA hydrogel carriers, the resulting P(AM/ILs)-SiO2@PBA/Pd hydrogels exhibited the ability to catalyze the degradation of p-nitrophenol. Remarkably, even after 15 applications, the efficiency of the degradation process remained consistently above 90%. Thus, the innovative SiO2@PBA toughened ILs-hydrogel design strategy can be utilized to develop robust and stretchable hydrogel materials for catalytic use in the sewage disposal industry.

Green Synthesis of Silver Nanoparticles Loaded Hydrogel for Wound Healing; Systematic Review

Wound healing is a biological process that involves a series of consecutive process, and its impairment can lead to chronic wounds and various complications. Recently, there has been a growing interest in employing nanotechnology to enhance wound healing. Silver nanoparticles (AgNPs) have expanded significant attention due to their wide range of applications in the medical field. The advantages of AgNPs include their easy synthesis, change their shape, and high surface area. Silver nanoparticles are very efficient for topical drug administration and wound healing because of their high ratio of surface area to volume. The efficiency of AgNPs depends on the synthesis method and the intended application. Green synthesis methods offer an eco-friendly approach by utilizing natural sources such as plant extracts and fungus. The characterization of nanoparticles plays an important character, and it is accomplished through the use of several characterization methods such as UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). These techniques are employed to confirm the specific characters of the prepared Silver Nanoparticles. Additionally, the review addresses the challenges and future perspectives of utilizing green-synthesized AgNPs loaded in Polyacrylamide hydrogel for wound healing applications, including the optimization of nanoparticle size, and release kinetics. Overall, this review highlights the potential of green-synthesized AgNPs loaded in Polyacrylamide hydrogel as promising for advanced wound healing therapies. There are different approaches of usage of AgNPs for wound healing such as polyacrylamide -hydrogels, and the mechanism after their antibacterial action, have been exposed.

Nanomaterials-Based Wound Dressing for Advanced Management of Infected Wound

The effective prevention and treatment of bacterial infections is imperative to wound repair and the improvement of patient outcomes. In recent years, nanomaterials have been extensively applied in infection control and wound healing due to their special physiochemical and biological properties. Incorporating antibacterial nanomaterials into wound dressing has been associated with improved biosafety and enhanced treatment outcomes compared to naked nanomaterials. In this review, we discuss progress in the application of nanomaterial-based wound dressings for advanced management of infected wounds. Focus is given to antibacterial therapy as well as the all-in-one detection and treatment of bacterial infections. Notably, we highlight progress in the use of nanoparticles with intrinsic antibacterial performances, such as metals and metal oxide nanoparticles that are capable of killing bacteria and reducing the drug-resistance of bacteria through multiple antimicrobial mechanisms. In addition, we discuss nanomaterials that have been proven to be ideal drug carriers for the delivery and release of antimicrobials either in passive or in stimuli-responsive manners. Focus is given to nanomaterials with the ability to kill bacteria based on the photo-triggered heat (photothermal therapy) or ROS (photodynamic therapy), due to their unparalleled advantages in infection control. Moreover, we highlight examples of intelligent nanomaterial-based wound dressings that can detect bacterial infections in-situ while providing timely antibacterial therapy for enhanced management of infected wounds. Finally, we highlight challenges associated with the current nanomaterial-based wound dressings and provide further perspectives for future improvement of wound healing.

Fabrication of Polysulfobetaine Gradient Coating via Oxidation Polymerization of Pyrogallol To Modulate Biointerfaces

A surface with a gradient physical or chemical feature, such as roughness, hardness, wettability, and chemistry, serves as a powerful platform for high-throughput investigation of cell responses to a biointerface. In this work, we developed a continuous antifouling gradient surface using pyrogallol (PG) chemistry. A copolymer of a zwitterionic monomer, sulfobetaine methacrylate, and an amino monomer, aminoethyl methacrylate, were synthesized (pSBAE) and deposited on glass slides via the deposition of self-polymerized PG. A gradient of pSBAE was fabricated on glass slides in 7 min in the presence of an oxidant, ammonium persulfate, by withdrawing the reaction solution. The modified glass slide showed a wettability gradient, determined by measuring the water contact angle. Cell adhesion and protein adsorption were well correlated with surface wettability. We expect that this simple and faster method for the fabrication of a continuous chemical gradient is applicable for high-throughput screening of surface properties to modulate biointerfaces.

Colorimetric detection of citric acid as the biomarker for urolithiasis based on sodium dodecylsulfate-AgNPs with a portable CD-spectrometer

Citric acid (CA) has been considered as a biomarker of urolithiasis due to its vital suppression role in urinary stone formation. Most analytical methods for detecting CA are complicated and require expensive equipment. Herein, a colorimetric method based on sodium dodecylsulfate (SDS) modified AgNPs was presented for convenient and portable detection of CA in urine. By detecting the absorption of the solution color, the quantitative detection of CA can be achieved. The pH value of SDS-AgNPs, concentration of Al³⁺ and incubation time were optimized. Under optimal conditions, the method has the detection range of 1-10 mg/L, with a limit of detection (LOD) of 0.21 mg/L. Moreover, a self-developed portable CD(Compact Disk)-spectrometer (CDs) was established for detecting CA with a LOD of 0.49 mg/L featuring high simplicity, low time cost and good portability. This method was also validated with good selectivity to CA. In addition, the artificial urine samples were also detected to verify the capability of the method and CDs. The results validated that the method integrating with the CDs can be a promising platform for citric acid detection that can be further used for early screening and prognostic monitoring of urolithiasis.

Incorporation of Silver Nanoparticles in Hydrogel Matrices for Controlling Wound Infection

For centuries, silver has been recognized for its antibacterial properties. With the development of nanotechnology, silver nanoparticles (AgNPs) have garnered significant attention for their diverse uses in antimicrobial gel formulations, dressings for wound healing, orthopedic applications, medical catheters and instruments, implants, and contact lens coatings. A major focus has been determining AgNPs' physical, chemical, and biological characteristics and their potential to be incorporated in biocomposite materials, particularly hydrogel scaffolds, for burn and wound healing. Though AgNPs have been rigorously explored and extensively utilized in medical and nonmedical applications, important research is still needed to elucidate their antibacterial activity when incorporated in wound-healing scaffolds. In this review, we provide an up-to-date, 10-yr (2010-2019), comprehensive literature review on advancements in the understanding of AgNP characteristics, including the particles' preparation and mechanisms of activity, and we explore various hydrogel scaffolds for delivering AgNPs.

MOF-Based Antibiofouling Hemoadsorbent for Highly Efficient Removal of Protein-Bound Bilirubin

A metal-organic framework (MOF)-based antibiofouling hemoadsorbent (PCB-MIL101) was developed through a facile encapsulation of MIL-101(Cr) in zwitterionic poly carboxybetaine (PCB) hydrogel. PCB-MIL101 possessed strong mechanical strength and superior hemocompatibility, ensuring its safety in hemoperfusion applications. In addition, it showed efficient and effective adsorption toward bilirubin (BR), and its maximum adsorption capacity was ∼583 mg g^-1. Moreover, due to the protection of antibiofouling PCB hydrogel, PCB-MIL101 showed ability to resist protein adsorption, thus working effectively to remove BR molecules from their binding albumin in biological solutions. The finding in this study provides a novel insight into developing MOF-based hemoadsorbents for the improvement of hemoperfusion therapies.

Facile fabrication of functional cellulose paper with high-capacity immobilization of Ag nanoparticles for catalytic applications for tannery wastewater

Abstract

It has been a research goal to develop macroscopic materials with an optimized surface structure to affix silver nanoparticles which could contaminate water and maximize their practical functions. Cellulose paper is a versatile biomass material valued for its abundance, low cost, biocompatibility, and natural composition. Until now, its potential application in water purification has not been adequately explored. In this study, gallic acid-modified silver nanoparticles (GA@AgNPs) were loaded onto commercial cellulose filter paper using a simple lipoic acid modification process (GA@AgNPs-LA-CP). Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) were used to characterize the GA@AgNPs-LA-CP. The catalytic activity of the GA@AgNPs-LA-CP was evaluated by the reduction reaction of methylene blue (MB), Rhodamine B (RhB), and 4-nitrophenol (4-NP) with sodium borohydride (NaBH4). The GA@AgNPs-LA-CP exhibited excellent catalytic activity toward MB, RhB, and 4-NP, taking advantage of its high specific surface area generated by the cellulose fiber network structure. Interestingly, due to the electrostatic interactions between the cationic dyes and the GA@AgNPs, the as-prepared catalytic composite material serves as a better catalyst for MB and RhB, suggesting dual applications of the composite materials for organic wastewater treatment and the removal of harmful dyes. This implies that the immobilization of AgNPs on cellulose papers is an effective method and can be applied to efficient wastewater treatment applications.

Graphical abstract

Hemocompatible hemoadsorbent for effective removal of protein-bound toxin in serum

Resin hemoperfusion is a life-saving treatment for drug intoxication or hepatic failure of patients. However, current resin adsorbents exhibit a limited hemocompatibility or low adsorption efficiency, representing a major roadblock to successful clinical applications. In this work, we developed a hemocompatible and effective hemoadsorbent based on polystyrene resin (H103) microparticles encapsulated in anti-biofouling zwitterionic poly(carboxybetaine) (PCB) hydrogels. Apart from a strong mechanical stability, this PCB-based adsorbent (PCB-H103) exhibited excellent hemocompatibility (hemolysis ratio was ∼0.64%), which was attributed to the anti-biofouling property of PCB hydrogel. In addition, it can efficiently adsorb both small and middle molecular weight molecules in phosphate-buffered saline, and the efficiencies were significantly higher than poly(ethylene glycol) methacrylate-based and poly(2-hydroxyethyl methacrylate)-based adsorbent counterparts, indicating the favorable permeability of PCB hydrogel coating. More importantly, PCB-H103 could effectively remove protein-bound toxins including phenol red and bilirubin in bovine serum albumin solution or even in 100% fetal bovine serum (FBS). In 100% FBS, the adsorption capacity of PCB-H103 towards bilirubin was 8.3 times higher than that of pristine clinical-scale resin beads. Findings in this work may provide a new strategy for the development of modern resin hemoperfusion technology.