Self-Assembly of Amphiphilic Schiff Base and Selectively Turn on Circularly Polarized Luminescence by Al3

A highly efficient, selective, reversible and ultra-sensitive fluorescence "Turn-ON" chemosensor for aluminium ions by a novel Schiff base

The synthesis of a Schiff base-based chemosensor, denoted as H6L, was accomplished through the condensation reaction of Isophthalohydrazide and 2,6-dihydroxybenzaldehyde in an ethanol solvent. The resulting compound was further characterized using 1H and 13C nuclear magnetic resonance (NMR) spectroscopy, as well as high-resolution mass spectrometry (HRMS). Extensive research has been conducted on several facets of metal sensing phenomena, revealing that the Schiff base H6L demonstrates discerning and expeditious fluorescence sensing characteristics specifically towards Al (III) in acetonitrile. The purported method detects Al (III) can be ascribed to the suppression of photo-induced electron transfer (PET) and the enhanced chelation-induced fluorescence (CHEF). The stoichiometry of metal-ligand complexes (2:1) was determined using Job's plots titrations, HRMS and subsequently confirmed using NMR titration studies. The H6L sensors demonstrated remarkable fluorescence sensing capabilities in acetonitrile, with a low detection limit (LOD) of 0.44 μM. This LOD is suitably low for the detection of Al3+, which is commonly found in many environmental and biological systems. Fluorescence lifetime measurement provides additional evidence of complexation of H6L with Al (III). The reversibility of the sensor was demonstrated through the introduction of pyrophosphate (PPi), which forms a complex with aluminium ions, thereby releasing the chemo sensor for subsequent utilization. The findings suggest that H6L has the potential to serve as a viable probe for the detection and identification of Al3+ ions.

Optical Property Control by the Interligand Charge Transfer Excited State in Brominated Homoleptic and Heteroleptic Aluminum Dinuclear Triple-Stranded Helicates

The utilization of aluminum, an abundant and inexpensive element, for the synthesis of novel functional complexes is extremely important, but the design and control of photofunctionality are still unexplored. In this study, we focused on our previously developed dinuclear triple-stranded helicates incorporating two aluminum ions (ALPHY) to synthesize both homoleptic and heteroleptic complexes with bromine atoms at the 3-position of the pyrrole moiety in the Schiff base ligands. The brominated Schiff base ligands were reacted with AlCl3 to synthesize homoleptic complexes, while different ligands were mixed to prepare heteroleptic complexes. Single-crystal X-ray structural analysis revealed the structures of these novel complexes. We found that increasing the degree of bromination resulted in a tunable emission color, shifting progressively from 550 (yellow) to 566 nm (orange). Optical resolution of the complexes facilitated the observation of mirror-image circular dichroism and circularly polarized luminescence. Furthermore, employing ultrafast spectroscopy techniques, we have elucidated that the optical properties are governed by the interligand charge transfer (ILCT) among the three ligands. The formation of heteroleptic complexes induces the ILCT state even in nonpolar environments, thereby accelerating nonradiative decay and intersystem crossing. These findings mark significant advancements in photofunctional materials based on multinuclear complexes.

Circularly Polarized Luminescence Switching Driven by Precisely Tuned Supramolecular Interactions: From Hydrogen Bonding to π-π Interaction

It is highly challenging to achieve circularly polarized luminescence (CPL) switching by precisely tuning supramolecular interactions and unveiling the mechanism of supramolecular chirality inversion. Herein, we demonstrated CPL switching based on diethyl l-glutamate-9-cyanophenanthrene (LGCP) and diethyl l-glutamate-pyrene (LGP) via the precise regulation of supramolecular interactions. LGCP assembly driven by hydrogen bonding showed right CPL, while LGP assembly driven by π-π interaction led to left CPL. Remarkably, significant CPL switching was observed from the assemblies of LGCP/octafluoronaphthalene (OFN), attributed to the alteration of the dominating interaction from weak hydrogen bonding to rather strong π-π interaction, while the assemblies of LGP/OFN exhibited minimum CPL variation because the dominating π-π interaction within the assembly of LGP/OFN illustrated quite limited variations upon arene-perfluoroarene interaction. This work provides a feasible strategy toward the efficient modulation of the chiroptical properties of multiple component supramolecular systems, meanwhile offering possibilities for the mechanism exploration of the chirality inversion of supramolecular assemblies.

Computational Insights into Sensing Mechanism for Al3+ in a New Acylhydrazone Fluorescent Probe Based on Excited-State Intramolecular Proton Transfer (ESIPT) and Twisted Intramolecular Charge Transfer (TICT)

The work explored the fluorescent properties of probe N'-(2, 4-dihydroxy-benzylidene)pyridine-3-carbohydrazide (HL) and its sensing mechanism for the Al³⁺ ion in detail. HL has two competing deactivation processes: ESIPT and TICT. Upon light-excitation, only one proton can transfer, and the SPT1 structure is generated. The SPT1 form is highly emissive, which is inconsistent with the colorless emission observed in the experiment. Then a nonemissive TICT state was obtained by rotating the C-N single bond. The energy barrier of the TICT process is lower than that of the ESIPT process, which indicates that probe HL will decay to the TICT state and quench the fluorescence. When Al³⁺ is recognized by probe HL, strong coordinate bonds are formed between HL and Al³⁺, and then the TICT state is prohibited, and the fluorescence of HL is turned on. Al³⁺ as a coordinated ion can effectively remove the TICT state but cannot influence the photoinduced electron transfer (PET) process of HL.

Facile Synthesis of Water-Soluble Rhodamine-Based Polymeric Chemosensors via Schiff Base Reaction for Fe3+ Detection and Living Cell Imaging

Quantitative and accurate determination of iron ions play a vital role in maintaining environment and human health, but very few polymeric chemosensors were available for the detection of Fe³⁺ in aqueous solutions. Herein, a water-soluble rhodamine-poly (ethylene glycol) conjugate (DRF-PEG), as a dual responsive colorimetric and fluorescent polymeric sensor for Fe³⁺ detection with high biocompatibility, was first synthesized through Schiff base reaction between rhodamine 6G hydrazide and benzaldehyde-functionalized polyethylene glycol. As expected, the introduction of PEG segment in DRF-PEG significantly improved the water solubility of rhodamine derivatives and resulted in a good biosensing performance. The detection limit of DRF-PEG for Fe³⁺ in pure water is 1.00 μM as a fluorescent sensor and 3.16 μM as a colorimetric sensor at pH 6.5. The specific sensing mechanism of DRF-PEG toward Fe³⁺ is proposed based on the intramolecular charge transfer (ICT) mechanism, in which the O and N atoms in rhodamine moiety, together with the benzene groups from benzaldehyde-modified PEG segment, participate in coordination with Fe³⁺. Furthermore, DRF-PEG was applied for the ratiometric imaging of Fe³⁺ in HeLa cells and showed the potential for quantitative determination of Fe³⁺ in fetal bovine serum samples. This work provides insights for the design of water-soluble chemosensors, which can be implemented in iron-related biological sensing and clinical diagnosis.

Metal-ion-mediated synergistic coordination: construction of AIE-metallogel sensor arrays for anions and amino acids

Metallogel-based six membered sensor arrays show applications in multi-analyte detection and fluorescence encryption.

Ruthenium Complexes Bearing Axially Chiral Bipyridyls: The Mismatched Diastereomer Showed Red Circularly Polarized Phosphorescence

Ruthenium^II complexes bearing three axially chiral bipyridyl ligands were synthesized as a new family of chiral complex dyes, and Δ-(S)- and Λ-(S)-diastereomers were obtained. The X-ray crystal structure analyses, spectroscopy, and DFT calculations suggested that all the bipyridyls maintained chirality in both the ground and excited states, and the Δ-(S)- and Λ-(S)-isomers are the matched (more relaxed) and mismatched (more constrained) pairs, respectively. The mismatched Λ-(S)-isomer exhibited red circularly polarized phosphorescence (CPP) both in solution and in the solid state. The solution state CPP is the most intense of ruthenium complexes, while the solid state CPP is the first example of them. It is supposed that, for the Λ-(S)-isomer, the six cumulative CH/π interactions suppress further distortion in the T₁ state.

Circularly polarized luminescence from organic micro-/nano-structures

Circularly polarized light exhibits promising applications in future displays and photonic technologies. Circularly polarized luminescence (CPL) from chiral luminophores is an ideal approach to directly generating circularly polarized light, in which the energy loss induced by the circularly polarized filters can be reduced. Among various chiral luminophores, organic micro-/nano-structures have attracted increasing attention owing to the high quantum efficiency and luminescence dissymmetry factor. Herein, the recent progress of CPL from organic micro-/nano-structures is summarized. Firstly, the design principles of CPL-active organic micro-/nano-structures are expounded from the construction of micro-/nano-structure and the introduction of chirality. Based on these design principles, several typical organic micro-/nano-structures with CPL activity are introduced in detail, including self-assembly of small molecules, self-assembly of π-conjugated polymers, and self-assembly on micro-/nanoscale architectures. Subsequently, we discuss the external stimuli that can regulate CPL performance, including solvents, pH value, metal ions, mechanical force, and temperature. We also summarize the applications of CPL-active materials in organic light-emitting diodes, optical information processing, and chemical and biological sensing. Finally, the current challenges and prospects in this emerging field are presented. It is expected that this review will provide a guide for the design of excellent CPL-active materials.

Multiple chiroptical switches and logic circuit based on salicyl‒ imine‒chitosan hydrogel

A chitosan-based chiral hydrogel was fabricated by grafting achiral salicylaldehyde (SA) on chitosan chains, followed by supramolecular assembly (CS-SA hydrogel hereafter). The structures and properties of the CS-SA hydrogel were characterized and investigated. The results indicated that the swelling ability of the CS-SA hydrogel depended on the medium pH and crosslinking degree. Circular dichroism measurements revealed that the chiral information of the chitosan was successfully transcribed to the achiral salicylic chromophores through imine bonds. Chiroptical switches based on acid-base responses of the imine bond and the OH fragment of SA and the swelling properties of the CS-SA hydrogel were fabricated, which is first reported for a chitosan-based hydrogel. In addition, a gel film showed good fatigue resistance under external stimuli. IMPLICATION, INHIBIT, and PASS logic gates and a logic circuit based on the chiroptical switches were successfully designed. This study suggests a new method of constructing biobased chiral functional materials.

Emission color-tunable oxazol(in)yl-substituted excited-state intramolecular proton transfer (ESIPT)-based luminophores

Oxazolinyl- and arylchalcogenazolyl-substituted hydroxyfluorenes exhibiting excited-state intramolecular proton transfer (ESIPT) are described as potent and highly modular luminophores. Emission color tuning was achieved by varying the π-expansion and the insertion of different chalcogen atoms.

Oxazolinyl- and arylchalcogenazolyl-substituted hydroxyfluorenes exhibiting excited-state intramolecular proton transfer (ESIPT) are described as potent and highly modular luminophores.

Application of real sample analysis and biosensing: Synthesis of new naphthyl derived chemosensor for detection of Al3+ ions

A new chemosensor (NANH) based on naphthyl moiety was synthesized with good selectivity and sensitivity towards Al³⁺ ions via the inhibition by operating through dual mechanisms like photo-induced electron transfer (PET) and excited-state intramolecular proton transfer (ESIPT). The synthesized NANH was validated by various techniques such as ¹H, ¹³C NMR and mass spectrum. While prominent fluorescent enhancement was observed from the NANH upon binding with Al³⁺ ions, however, other metal ions have not responded in the emission spectrum. Detection limit and association constant of NANH for Al³⁺ were calculated as 1.2 × 10^-7 M and 4.09 × 10⁴ M^-1 by using fluorescence titration method. Binding ratio (1:1) of NANH with Al³⁺ ions were proved by Job's plot and DFT studies. Furthermore, aluminium in variety of water samples was determined, and NANH could be used for biosensing of Al³⁺ in living cells.

Metal Ion Mediation of Interfacial Chiral Supramolecular Formation of Amphiphilic Schiff Bases Studied by In Situ Second Harmonic Generation

The coordination effects between chiral Schiff bases and metal ions can provide an effective strategy for fabricating chiral supramolecular self-assemblies. We studied the supramolecular self-assembly of the amphiphilic Schiff base enantiomer, 2-hydroxy-1-naphthylmethylamino-N,N'-bis(octadecyl)-l/d-glutamic diamide (l/dGJ), at the air/water interfaces by using in situ second harmonic generation linear dichroism (SHG-LD) technique combined with UV-vis spectroscopy and atom force microscopy. lGJ and dGJ monolayers can form mirror-image structures of each other at different interfaces, which can be mediated by metal ions. When Mg²⁺ and Zn²⁺ ions were added into the subphases, the l/dGJ monolayers self-assembled into a nanofiber-like structure and showed significant chirality similar to that at the pure water interface. However, when Cu²⁺ ions were added into the subphase, the chirality of the l/dGJ monolayer was destroyed because of the Cu²⁺ coordination effect. The degree of the chirality excess (DCE) value decreased with the increment of the concentration of Cu²⁺ in the subphase. Furthermore, when the surface pressure increased, the DCE value of Cu²⁺-l/dGJ complexes increased gradually, which indicated that the Cu²⁺-l/dGJ complex aggregated into a chiral supramolecular structure through lateral molecular packing.

Helical Nanostructures with Circularly Polarized Luminescence from the Multicomponent Assembly of π-Conjugated N-terminal Amino Acids

Self-assembled structures with circularly polarized luminescence (CPL) have attracted great attention in recent years. π-conjugated N-terminal amino acids with chiral amino acid residues and luminophores are capable of forming self-assembled structures at hierarchical levels, whereby chirality can be transferred to the macroscopic scale with easily modulated CPL properties. Due to the presence of multiple noncovalent binding sites, including hydrogen bonding and aromatic interactions, π-conjugated N-terminal amino acids are emerging core candidates for incorporation into multicomponent self-assembled architectures, accomplishing rational control over supramolecular chirality as well as showing rich chiroptical properties. In this Minireview, we provide a brief summary of multiple-component coassembled systems comprising π-conjugated N-terminal amino acids, small organic species and metal ions. The synthesis of helical structures and manipulation of supramolecular chirality by controlling the self-assembled species is introduced, and the CPL properties of multiple-component π-conjugated N-terminal amino acids are also briefly summarized.

The Progress and Perspective of Organic Molecules With Switchable Circularly Polarized Luminescence

Circularly polarized luminescence (CPL) has been under intense research for future applications in high-resolution 3D displays, smart sensors, and information technologies. Different types of CPL materials have been developed, but neither the handedness nor the asymmetrical luminescence degree can be inferred from the material composition or the components. CPL materials with switchable handedness or emission wavelength play an important role, reducing the need for repetitive bottom-up synthesis. Here, we have presented switchable CPL behaviors toward multiple reported stimuli, including light irradiation, host-guest interaction, metal ions, pH, solvent, temperature, etc. This summary and discussion of the effective stimuli is aimed to promote rational future material exploration and boost related multidisciplinary applications.

Flexible multidentate benzyldiamine derivatives with high affinity for β-amyloid in cerebral amyloid angiopathy

Cerebral amyloid angiopathy (CAA) commonly found in the aged is pathologically characterized by β-amyloid (Aβ) deposition in the walls of arteries and capillaries of brain. In this study, four flexible multidentate benzyldiamine derivatives as potential probes for cerebrovascular Aβ deposition were designed and synthesized. In in vitro inhibition assays, the ligands 18-21 displayed high affinities for Aβ aggregates with K_i values of 1.45 ± 0.53 nM, 1.68 ± 0.35 nM, 1.16 ± 0.23 nM and 1.72 ± 0.19 nM, respectively. A significant improvement in the binding affinity over the monomer, compounds 9-12 or benzyldiamine derivatives, demonstrated the applicability of the multidentate approach. The underlying mechanism of these novel Aβ agents was explored by molecular docking technique, which theoretically verified the high affinities of the multidentate benzyldiamine derivatives for Aβ aggregates. Moreover, the molecular masses of the ligands 18-21 are more than 700 Dalton, which are believed to be hardly capable of penetrating blood brain barrier. In this regard, these ligands could be used to distinguish CAA from Alzheimer's disease which is another Aβ-related disorder disease. To convert these ligands to positron emission tomography imaging agents, we attempted to radiosynthesize [¹⁸F]18. Though the radiolabeling was not very successful, the preliminary results suggested that these newly proposed multidentate benzyldiamine derivatives may be used as potential Aβ imaging agents in cerebral amyloid angiopathy.

Circularly Polarized Luminescence of Aluminum Complexes for Chiral Sensing of Amino Acid and Amino Alcohol

Determination of the absolute configuration (AC) of chiral molecules is a key issue in many fields related to chirality such as drug development, the asymmetric reaction screening, and the structure determination of natural compounds. Although various methods, such as X-ray crystallography and NMR spectroscopy, are used to determine the AC, a simple and cheap alternative method is always anticipated. So far, electronic circular dichroism (ECD) spectroscopy has been widely used to ascertain the AC and enantiomeric excess (ee) values by applying appropriate organic probes. Here, circularly polarized luminescence (CPL) spectroscopy was applied to determine the AC and ee values of a series of amino acid and amino alcohol. The measurements were conducted by mixing the amino acids or amino alcohols with an achiral 1-hydroxy-2-naphthaldehyde. Upon in situ formation of the Schiff base complexes, the system showed emission enhancement and CPL in the presence of Al³⁺ , whose intensity and sign can be used to assign the chiral sense of the amino acids and amino alcohols. The authenticity of the method was further compared with the established CD spectroscopy, revealing that CPL spectra of formed Al³⁺ complex were effective to determine the AC of chiral species.

In Situ Construction of Ag/TiO2/g-C3N4 Heterojunction Nanocomposite Based on Hierarchical Co-Assembly with Sustainable Hydrogen Evolution

The construction of heterojunctions provides a promising strategy to improve photocatalytic hydrogen evolution. However, how to fabricate a nanoscale TiO2/g-C3N4 heterostructure and hinder the aggregation of bulk g-C3N4 using simple methods remains a challenge. In this work, we use a simple in situ construction method to design a heterojunction model based on molecular self-assembly, which uses a small molecule matrix for self-integration, including coordination donors (AgNO3), inorganic titanium source (Ti(SO4)2) and g-C3N4 precursor (melamine). The self-assembled porous g-C3N4 nanotube can hamper carrier aggregation and it provides numerous catalytic active sites, mainly via the coordination of Ag+ ions. Meanwhile, the TiO2 NPs are easily mineralized on the nanotube template in dispersive distribution to form a heterostructure via an N-Ti bond of protonation, which contributes to shortening the interfacial carrier transport, resulting in enhanced electron-hole pairs separation. Originating from all of the above synergistic effects, the obtained Ag/TiO2/g-C3N4 heterogenous photocatalysts exhibit an enhanced H2 evolution rate with excellent sustainability 20.6-fold-over pure g-C3N4. Our report provides a feasible and simple strategy to fabricate a nanoscale heterojunction incorporating g-C3N4, and has great potential in environmental protection and water splitting.

Facile Preparation and Highly Efficient Catalytic Performances of Pd-Cu Bimetallic Catalyst Synthesized via Seed-Mediated Method

With the rapid development of industry, the problem of environmental pollution has become increasingly prominent. Exploring and preparing green, efficient, and low cost catalysts has become the key challenge for scientists. However, some conventional preparation methods are limited by conditions, such as cumbersome operation, high energy consumption, and high pollution. Here, a simple and efficient seed-mediated method was designed and proposed to synthesize a highly efficient bimetallic catalyst for catalyzing nitro compounds. A Pd-Cu bimetallic composite (BCM) can be prepared by synthesizing the original seed crystal of precious metal palladium, then growing the mature nanocrystalline palladium and supporting the transition metal copper. Importantly, after eight consecutive catalytic cycles, the conversion of the catalyzed 2-NA was 84%, while the conversion of the catalyzed 4-NP was still 72%. And the catalytic first order rates of 2-NA and 4-NP constants were 0.015 s-1, and 0.069 s-1, respectively. Therefore, current research of nanocomposites catalyst showed great significance for serious environmental pollution problems and the protection of living environment, providing a new idea for the preparation of new bimetallic catalytic materials.

Inversion of Circularly Polarized Luminescence of Nanofibrous Hydrogels through Co-assembly with Achiral Coumarin Derivatives

Control over the handedness of circularly polarized luminescence (CPL) in supramolecular gels is of special significance in biology and optoelectronics; however, it still remains a great challenge to precisely and efficiently regulate the chirality of CPL. Herein, a chiral phenylalanine-derived hydrogelator and achiral coumarin derivatives can co-assemble into nanofibrous hydrogels with controllable chirality, and the handedness of CPL of these hydrogels can be efficiently inverted by coumarin derivatives through noncovalent interactions, which can be further tuned at will by incorporating metal ions into the co-assembly. The hydrogen bonds, coordination interactions, and steric hindrance are proved to be the crucial factors for the CPL inversion. This study provides feasible strategies to efficiently regulate the handedness of CPL through co-assembly, and these CPL materials may have potential applications in the fields of photoelectric devices, smart chiroptical materials, and biological systems.

Reaction-based chiroptical sensing of ClO− using circularly polarized luminescence via self-assembly organogel

A chiral amino acid functionalized probe, PTZ-D, could self-assemble into a chiral organogel displaying unprecedented chiroptical monitoring of ClO⁻ with switchable CPL signals.

A fluorescent conjugated polymer photocatalyst based on Knoevenagel polycondensation for hydrogen production

An organic polymer photocatalyst (p-P) for hydrogen production was designed and synthesized through Knoevenagel condensation with a high yield.