Quantitative Criterion to Predict Cell Adhesion by Identifying Dominant Interaction between Microorganisms and Abiotic Surfaces

Microalgae cell adhesions on hydrophobic membrane substrates using quartz crystal microbalance with dissipation

Microalgal cell adhesion and biofilm formation are affected by interactions between microalgae strains and membrane materials. Variations of surface properties of microalgae and membrane materials are expected to affect cell-membranes and cell-cell interactions and thus initial microalgal cell adhesion and biofilm formation rates. Hence, it should be possible to identify the dominant mechanisms controlling microalgal cell adhesion and biofilm formation. The effects of surface properties of three different microalgal strains and three different types of membrane materials on microalgal cell adhesion and biofilm formation were systematically investigated in real time by monitoring changes in the oscillation frequency and dissipation of the quartz crystal resonator (QCM-D). The results revealed that in general a higher surface free energy, more negative zeta potential, and higher surface roughness of membrane materials positively correlated with a larger quantity of microalgae cell deposition, while a more hydrophilic microalgae with a larger negative zeta potential preferred to attach to a more hydrophobic membrane material. The adhered microalgal layers exhibited viscoelastic properties. The relative importance of these mechanisms in controlling microalgae cell attachment and biofilm formation might vary, depending on the properties of specific microalgae species and hydrophobic membrane materials used.

Surface properties of membrane materials and their role in cell adhesion and biofilm formation of microalgae

In this study, the effects of surface properties of membrane materials on microalgae cell adhesion and biofilm formation were investigated using Chlorella vulgaris and five different types of membrane materials under hydrodynamic conditions. The results suggest that the contact angle (hydrophobicity), surface free energy, and free energy of cohesion of membrane materials alone could not sufficiently elucidate the selectivity of microalgae cell adhesion and biofilm formation on membrane materials surfaces, and membrane surface roughness played a dominant role in controlling biofilm formation rate, under tested hydrodynamic conditions. A lower level of biofilm EPS production was generally associated with a larger amount of biofilm formation. The zeta potential of membrane materials could enhance initial microalgae cell adhesion and biofilm formation through salt bridging or charge neutralization mechanisms.

Revealing mechanism and influence of microalgae cells' periodical auto-agglomeration induced by high concentration of carbon dioxide

The efficient cultivation of microalgae using CO₂ from flue gas can be a win-win situation for both environmental protection and energy accessibility. In general, 10-20% of CO₂ in flue gas would decrease pH and inhibit microalgae growth. However, Chlorella sorokiniana MB-1 under 15% CO₂ showed a periodical auto-agglomeration, which promoted microalgae growth on the contrary in this study. The maximum biomass concentration of 3.27 g L^-1 was higher than that cultivated with an optimal CO₂ concentration. The pH decreased to 6.04 after the mixed gas with 15% CO₂ (v/v) was bubbled into medium for 0.5 hours, which resulted in auto-agglomeration to protect microalgae from acidification and keep a high specific growth rate of 0.03 h^-1. Then the pH recovered to 7 during stabilization phase, auto-agglomeration ratio was up to 100% because of lamellar extracellular polymeric substances. Therefore, the interesting periodical agglomeration both enhanced growth and simplified harvesting.

Chemotactic movement and zeta potential dominate Chlamydomonas microsphaera attachment and biocathode development

Microalgal cell attaching and biofilm formation are critical in the application of microalgal biocathode, which severs as one of the hopeful candidates to an original cathode in bioelectrochemical systems. Many efforts have been put in biofilm formation and bioelectrochemical systems for years, but the predominant factors shaping microalgal biocathode formation are sketchy. We launched a pair of researches to investigate microalgal attachment and biofilm formation in the presence/absence of applied voltages using Chlamydomonas microsphaera as a model unicellular motile microalga. In this study, we presented how microalga attached and biofilm formed on a carbon felt surface without applied voltages and try to manifest the most important aspects in this process. Results showed that while nutrient sources did not directly regulate cell attachment onto the carbon felt, limited initial nutrient concentration nevertheless promoted cell attachment. Specifically, nutrient availability did not influence the early stage (20-60 min) of microalgal cell attachment but did significantly impact cell attachment during later stages (240-720 min). Further analysis revealed that nutrient availability-mediated chemotactic movements and zeta potential are crucial to facilitate the initial attachment and subsequent biofilm formation of C. microsphaera onto the surfaces, serving as an important factor controlling microalgal surface attachment. Our results demonstrate that nutrient availability is a dominant factor controlling microalgal surface attachment and subsequent biofilm formation processes. This study provides a mechanistic understanding of microalgal surface attachment and biofilm formation processes on carbon felts surfaces in the absence of applied voltages.

Fouling evolution of extracellular polymeric substances in forward osmosis based microalgae dewatering

Membrane fouling was still a challenge for the potential application of forward osmosis (FO) in algae dewatering. In this study, the fouling behaviors of Chlorella vulgaris and Scenedesmus obliquus were compared in the FO membrane filtration process, and the roles of their soluble-extracellular polymeric substances (sEPS) and bound-EPS (bEPS) in fouling performance were investigated. The results showed that fouling behaviors could be divided into two stages including a quickly dropped and later a stable process. The bEPS of both species presented the highest flux decline (about 40.0%) by comparison with their sEPS, cells and broth. This performance was consistent with the largest dissolved organic carbon losses in feed solutions, and the highest interfacial free energy analyzed by the extended Derjaguin-Landau-Verwey-Overbeek (XDLVO) theory. The chemical characterizations of algal foulants further showed that the severe fouling performance was also consistent with a proper ratio of carbohydrates and proteins contents in the cake layer, as well as the higher low molecular weight (LMW) components. Compared with the bEPS, the sEPS was crucial for the membrane fouling of S. obliquus, and an evolution of the membrane fouling structure was found in both species at the later filtration stage. This work clearly revealed the fundamental mechanism of FO membrane fouling caused by real microalgal suspension, and it will improve our understanding of the evolutionary fouling performances of algal EPS.

Microalgae as Soft Permeable Particles

The colloidal stability of non-motile algal cells in water drives their distribution in space. An accurate description of the interfacial properties of microalgae is therefore critical to understand how microalgae concentrations can change in their biotope or during harvesting processes. Here, we probe the surface charges of three unicellular algae─Chlorella vulgaris, Nannochloropsis oculata, and Tetraselmis suecica─through their electrophoretic mobility. Ohshima's soft particle theory describes the electrokinetic properties of particles covered by a permeable polyelectrolyte layer, a usual case for biological particles. The results appear to fit the predictions of Ohshima's theory, proving that all three microalgae behave electrokinetically as soft particles. This allowed us to estimate two characteristic parameters of the polyelectrolyte external layer of microalgae: the volume charge density and the hydrodynamic penetration length. Results were compared with transmission electron microscopy observations of the algal cells' surfaces, and in particular of their extracellular polymeric layer, which was identified with the permeable shell evidenced by electrophoretic measurements. Noticeably, the algal surface potentials estimated from electrophoretic mobility using the soft particle theory are less negative than the apparent zeta potentials. This finding indicates that electrostatics are expected to play a minor role in phenomena of environmental and industrial importance, such as microalgae aggregation or adhesion.

How Interfacial Properties Affect Adhesion: An Analysis from the Interactions between Microalgal Cells and Solid Substrates

Microalgal biofilm, a stable community of many algal cells attached to a solid substrate, plays a significant role in the efficient accumulation of renewable energy feedstocks, wastewater treatment, and carbon reduction. The adhesion tendency of microalgal cells on solid substrates is the basis for controlling the formation and development of microalgal biofilm. To promote the adhesion of microalgal cells on solid substrates, it is necessary to clarify which surface properties have to be changed in the most critical factors affecting the adhesion. However, there have been few systematic discussions on what surface properties influence the adhesion tendency of algal cells on solid substrates. In this study, the essential principle of microalgal cell adhesion onto solid substrates was explored from the perspective of the interaction energy between microalgal cells and solid substrates. The influence of surface properties between microalgal cells and solid substrates on interaction energies was discussed via extended Derjaguin-Landau-Verwey-Overbeek (eDLVO) theory and a sensitivity analysis. The results showed that surface properties, including surface potential (ξ) and surface free energy components, significantly affect the adhesion tendency of microalgal cells on different solid substrates. When the solid surface possesses positive charges (ξ > 0), reducing ξ or the electron donor components of the solid substrate (γ_s^-) is an effective measure to promote microalgal cell adhesion onto the solid substrate. When the solid surface possesses negative charges (ξ < 0), an increase in either γ_s^- or the absolute value of ξ should be avoided in the process of microalgae adhesion. Overall, this research provides a direction for the selection of solid substrates and a direction for surface modification to facilitate the adhesion tendency of microalgal cells on solid substrates under different scenarios.

Electrotaxis-mediated cell motility and nutrient availability determine Chlamydomonas microsphaera-surface interactions in bioelectrochemical systems

Cell attachment onto electrode-forming biocathodes is a promising alternative to expensive catalysts used for electricity production in bioelectrochemical systems (BESs). Though BESs have been extensively studied for decades, the processes, underlying mechanisms, and determinant driving forces of microalgal biocathode formation remain largely unknown. In this study, we employed a model unicellular motile microalga, Chlamydomonas microsphaera, to investigate the microalgal attachment processes onto the electrode surface of a BES and to identify the determinant factors. Results showed that the initial attachment of C. micrrosphaera cells is determined by the applied external voltage rather than nutrient availability and occurs via electrotaxis-mediated cell motility. The subsequent development of the C. microsphaera biofilm is then increasingly determined by nutrient availability. Our results revealed that, in the absence of an external voltage, nutrient availability remains a dominant factor controlling the fate of the microalgal surface attachment and subsequent biofilm formation processes. Thus, our results show that electrotactic and chemotactic movements are crucial to facilitate the initial attachment and subsequent biofilm formation of C. microsphaera onto the electrode surfaces of BES. This study provides new insights into the mechanisms of microalgal surface attachment and biofilm formation processes on microalgal biocathodes, which hold great promise for improving the electrochemical properties of cathodes.

Substrate properties as controlling parameters in attached algal cultivation

There is growing interest in attached algae cultivation systems because they could provide a more cost- and energy-efficient alternative to planktonic (suspended algae) cultivation systems for many applications. However, attached growth systems have been far less studied than planktonic systems and have largely emphasized algae strains of most interest for biofuels. New algal biorefinery pathways have assessed the commercial potentials of algal biomass beyond biofuel production and placed more emphasis on value-added products from that biomass. Therefore, algal strain selection criteria and biomass cultivation methods need to be updated to include additional strains for improved efficiency. One possible way of improving attached cultivation systems is through engineering substrate surface characteristics to boost algal adhesion and enable strain selective algal colonization and growth. This review explores the effect of substrate chemical and topographical characteristics on the cultivation of attached algae. It also highlights the importance of considering algal community structure and attachment mechanisms in investigating attached algae systems using the example of filamentous algae found in algal turf scrubber (ATS™) systems. KEY POINTS : • Attached algal cultivation is a promising alternative to planktonic cultivation. • Performance increase results from tuning surface qualities of attachment substrates. • Attachment adaptation of periphytic algae has innate potential for cultivation.

Analyzing microalgal biofilm structures formed under different light conditions by evaluating cell-cell interactions

Biofilm structure plays an important role in microalgae biofilm-based culture. This work aims to understand microalgal biofilm structures formed under different light conditions. Here, Scenedesmus obliquus was biofilm cultured under the light spectra of white, blue, green, and red, and the photoperiods of 5:5 s, 30:30 min, and 12:12 h (light : dark period). Biofilms were observed with confocal laser scanning microscopes and profilometry, then the porosity and roughness of biofilm were determined. We found that cells under white light formed a heterogeneous biofilm with many voids, high porosity, and roughness. While under red and blue lights, cells formed homogeneous biofilms with low porosity. Biofilm structures formed under different photoperiods were different. The mechanism of forming different biofilm structures under different light conditions was interpreted from the aspect of cell-cell interactions. Moreover, the results revealed that biomass accumulation increased with the increasing biofilm porosity due to the high effective diffusion coefficient.

Thermoresponsive Surfaces Grafted by Shrinkable Hydrogel Poly(N-isopropylacrylamide) for Controlling Microalgae Cells Adhesion during Biofilm Cultivation

Microalgae is a promising candidate for reducing greenhouse gas and producing renewable biofuels. For microalgae biofilm cultivation, a strong adhesion ability of microalgae cells onto the surface is a prerequisite to resist the fluid shear stress, while strong adhesion is not of benefit to the biofilm harvesting process. To solve this dilemma, a thermoresponsive surface (TMRS) with lower critical solution temperature of 33 °C was made by grafting N-isopropylacrylamide onto a silicate glass slide. The wettability of the TMRS changed from hydrophilic (contact angle of 59.4°) to hydrophobic (contact angle of 91.6°) when the temperature rose from 15 to 35 °C, resulting in the increase of adhesion energy of the TMRS to Chlorella vulgaris cells by 135.6%. The experiments showed that the cells were more likely to attach onto the TMRS at the higher temperature of 35 °C owing to the surface microstructures generated by the hydrogel layer shrinkage, which is similar in size to the microalgae cells. And the cell coverage rate on TMRS increased by 32% compared to the original glass surface. Conversely, the cells separate easily from the TMRS at a lower temperature of 15 °C, and the cell adhesion density was reduced by 19% due to hydrogel layer swelling to a relatively flat surface.

Cell Surface Energy Affects the Structure of Microalgal Biofilm

Microalgae biofilm-based culture systems have wide applications in environmental engineering and biotechnology. Biofilm structure is critical for the transport of nutrients, gas, and signaling molecules in a microalgal biofilm. This work aims to understand the influence of cell surface energy (SE) on the microalgal biofilm structure. Three microalgae species were used as model cells in the study: Chlorella sp., Nannochloris oculata, and Chlorella pyrenoidosa. First, by mediating biofilm culture conditions, we obtained Chlorella sp. cells with SEs of 40.4 ± 1.5, 44.7 ± 1.0, and 62. 7 ± 1.2 mJ/m², N. oculata cells with SEs of 47.7 ± 0.5, 41.1 ± 1.0, and 62.6 ± 1.2 mJ/m², and C. pyrenoidosa cells with SEs of 64.0 ± 0.6, 62.1 ± 0.7, and 62.8 ± 0.6 mJ/m². Then, based on the characterizations of biofilm structures, we found that cell SE can significantly affect the microalgae biofilm structure. When the cell SEs ranged from 40 to 50 mJ/m², the microalgae cells formed heterogeneous biofilms with a large number of open voids, and the biofilm porosity was higher than 20%. Alternatively, when the cell SEs ranged from 50 to 65 mJ/m², the cells formed a flat, homogeneous biofilm with the porosity lower than 20%. Finally, the influencing mechanism of cell SE on biofilm structure was interpreted based on the thermodynamic theory via analyzing the co-adhesion energy between cells. The study has important implications in understanding factors that influence the biofilm structures.

Light-Emitting Diode Power Conversion Capability and CO2 Fixation Rate of Microalgae Biofilm Cultured Under Different Light Spectra

Microalgae biofilm-based culture has attracted much interest due to its high harvest efficiency and low energy requirements. Using light-emitting diodes (LEDs) as light source for microalgae culture has been considered as a promising choice to enhance the economic feasibility of microalgae-based commodities. In this work, the LED power conversion capability and CO2 fixation rate of microalgae biofilms (Chlorella ellipsoidea and Chlorella pyrenoidosa) cultured under different light spectra (white, blue, green and red) were studied. The results indicated that the power-to-biomass conversion capabilities of these two microalgae biofilms cultured under blue and white LEDs were much higher than those under green and red LEDs (C. ellipsoidea: 32%–33% higher, C. pyrenoidosa: 34%–46% higher), and their power-to-lipid conversion capabilities cultured under blue LEDs were 61%–66% higher than those under green LEDs. The CO2 fixation rates of these two biofilms cultured under blue LEDs were 13% and 31% higher, respectively, than those under green LEDs. The results of this study have important implications for selecting the optimal energy-efficient LEDs using in microalgae biofilm-based culture systems.

Bacterial Biofilm Bioinspired Persistent Luminescence Nanoparticles with Gut-Oriented Drug Delivery for Colorectal Cancer Imaging and Chemotherapy

Colorectal cancer (CRC) is now one of the leading causes of cancer incidence and mortality. Although nanomaterial-based drug delivery has been used for the treatment of colorectal cancer, inferior targeting ability of existing nanocarriers leads to inefficient treatment and side effects. Moreover, the majority of intravenously administered nanomaterials aggregate into the reticuloendothelial system, leaving a certain hidden risk to human health. All those problems gave great demands for further construction of well-performed and biocompatible nanomaterials for in vivo theranostics. In the present work, from a biomimetic point of view, Lactobacillus reuteri biofilm (LRM) was coated on the surface of trackable zinc gallogermanate (ZGGO) near-infrared persistent luminescence mesoporous silica to create the bacteria bioinspired nanoparticles (ZGGO@SiO₂@LRM), which hold the inherent capability of withstanding the digestion of gastric acid and targeted release 5-FU to colorectum. Through the background-free persistent luminescence bioimaging of ZGGO, the coating of LRM facilitated the localization of ZGGO@SiO₂@LRM to the tumor area of colorectum for more than 24 h after intragastric administration. Furthermore, ZGGO@SiO₂@LRM hardly entered the blood, which avoided possible damage to immune organs such as the liver and spleen. In vivo chemotherapy experiment demonstrated the number of tumors per mouse in ZGGO@SiO₂@LRM group decreased by one-half compared with the 5-FU group (P < 0.001). To sum up, this LRM bioinspired nanoparticles could tolerate the digestion of gastric acid, avoid aggregation by the immune system, favor gut-oriented drug delivery, and targeted release oral 5-FU into colorectum for more than 24 h, which may give new application prospects for targeted delivery of oral drugs into the colorectum.