Liquid Crystal based Detection of Pb(II) Ions Using Spinach RNA as Recognition Probe

Label-free liquid crystal-based optical detection of norfloxacin using an aptamer recognition probe in soil and lake water

Norfloxacin (NOX), a broad spectrum fluoroquinolone (FQ) antibiotic, is commonly detected in environmental residues, potentially contributing to biological drug resistance. In this paper, an aptamer recognition probe has been used to develop a label-free liquid crystal-based biosensor for simple and robust optical detection of NOX in aqueous solutions. Stimuli-receptive liquid crystals (LCs) have been employed to report aptamer-target binding events at the LC-aqueous interface. The homeotropic alignment of LCs at the aqueous-LC interface is due to the self-assembly of the cationic surfactant cetyltrimethylammonium bromide (CTAB). In the presence of the negatively charged NOX aptamer, the ordering changes to planar/tilted. On addition of NOX, the aptamer-NOX binding causes redistribution of CTAB at the LC-aqueous interface and the homeotropic orientation is restored. This results in a bright-to-dark optical transition under a polarized optical microscope (POM). This optical transition serves as a visual indicator to mark the presence of NOX. The devised aptasensor demonstrates high specificity with a minimum detection limit of 5 nM (1.596 ppb). Moreover, the application of the developed aptasensor for the detection of NOX in freshwater and soil samples underscores its practical utility in environmental monitoring. This proposed LC-based method offers several advantages over conventional detection techniques for a rapid, feasible and convenient way to detect norfloxacin.

Liquid crystal based sensor for antimony ions detection using poly-adenine oligonucleotides

Antimony is highly toxic and a key water pollutant, which needs to be monitored closely. To date, however, most analytical methods for antimony detection are quite limited because they are complicated, expensive, and not suitable for real-time monitoring of antimony. In this study, a label-free and rapid method for antimony ions (Sb3+) detection is developed based on liquid crystals and a 10-mer poly-adenine oligonucleotide as a specific recognition probe for the first time. The working principle is based on the binding of the oligonucleotide to Sb3+, which weakens the interaction between the oligonucleotide and cationic surfactants. As a result, the event induces a planar-to-homeotropic orientational change of liquid crystals and a bright-to-dark optical change under crossed polars. This liquid crystal-based optical sensor exhibits a rapid response to Sb3+ in 10 s, a detection range between 20 nM and 5 μM, and a detection limit at 6.7 nM calculated from 10-mins assay time. It also shows good selectivity against other metal ions including Ag+, Cd2+, Cu2+, Fe3+, K+, Mg2+, Mn2+, Na+, Pb2+, and Zn2+. Moreover, this system can be used to detect Sb3+ in aqueous solutions with different pH or ionic strengths. This simple, fast, and low-cost liquid crystal-based sensing approach with high sensitivity and selectivity has a high potential for detecting Sb3+ in natural environments and industrial wastewater.

Ultralow background one-pot detection of Lead(II) using a non-enzymatic double-cycle system mediated by a hairpin-involved DNAzyme

A double-cycle system has been developed for specifically detecting trace amounts of Pb2+ by significantly decreasing the background signal. The detection involves two types of RNA cleavage reactions: one using a Pb2+-specific GR5 DNAzyme (PbDz) and the other utilizing a newly constructed 10-23 DNAzyme with two hairpins embedded in its catalytic center (hpDz). The ring-structured hpDz (c-hpDz) exhibits significantly lower activity compared to the circular 10-23 DNAzyme without hairpin structures, which plays a crucial role in reducing the background signal. When Pb2+ is present, PbDz cleaves c-hpDz to its active form, which then disconnects the molecular beacon to emit the fluorescent signal. The method allows for rapid and sensitive Pb2+ detection within 40 min for 10 fM of Pb2+ and even as short as 10 min for 100 nM of Pb2+. Additionally, visual detection is possible through the non-crosslinking assembly of Au nanoparticles. The entire process can be performed in one pot and even one step, making it highly versatile and suitable for a wide range of applications, including food safety testing and environmental monitoring.

Liquid Crystal Biosensors: A New Therapeutic Window to Point-of-Care Diagnostics

After revolutionizing the field of electro-optic displays, liquid crystals (LCs) are emerging as functional soft materials with wide-ranging biomedical implications. Integrating smart sensor designs with label-free imaging presents exciting opportunities in diagnostics. In this Perspective, we present an elegant collage of the key findings that demonstrate the utility of LC biosensors in diagnosing a disease or infection in clinical samples, cellular microenvironments, or bodily fluids. We emphasize the currently prevalent diagnostic techniques and the advances made using LCs in achieving greater sensitivity, a simplified strategy, multiplexed detection, and so on. We collate the landmark contributions in translational research in LC-based diagnostics. We believe that developing LC-based biosensors presents a new therapeutic window in point-of-care diagnostics.

Aptamer-based NanoBioSensors for seafood safety

Chemical and biological contaminants are of primary concern in ensuring seafood safety. Rapid detection of such contaminants is needed to keep us safe from being affected. For over three decades, immunoassay (IA) technology has been used for the detection of contaminants in seafood products. However, limitations inherent to antibody generation against small molecular targets that cannot elicit an immune response, along with the instability of antibodies under ambient conditions greatly limit their wider application for developing robust detection and monitoring tools, particularly for non-biomedical applications. As an alternative, aptamer-based biosensors (aptasensors) have emerged as a powerful yet robust analytical tool for the detection of a wide range of analytes. Due to the high specificity of aptamers in recognising targets ranging from small molecules to large proteins and even whole cells, these have been suggested to be viable molecular recognition elements (MREs) in the development of new diagnostic and biosensing tools for detecting a wide range of contaminants including heavy metals, antibiotics, pesticides, pathogens and biotoxins. In this review, we discuss the recent progress made in the field of aptasensors for detection of contaminants in seafood products with a view of effectively managing their potential human health hazards. A critical outlook is also provided to facilitate translation of aptasensors from academic laboratories to the mainstream seafood industry and consumer applications.

Rapid and Label-Free Methanol Identification in Alcoholic Beverages Utilizing a Textile Grid Impregnated with Chiral Nematic Liquid Crystals

Methanol contamination of alcoholic drinks can lead to severe health problems for human beings including poisoning, headache, blindness, and even death. Therefore, having access to a simple and inexpensive way for monitoring beverages is vital. Herein, a portable, low cost, and easy to use sensor is fabricated based on the exploitation of chiral nematic liquid crystals (CLCs) and a textile grid for detection of methanol in two distinct alcoholic beverages: red wine and vodka. The working principle of the sensor relies on the reorientation of the liquid crystal molecules upon exposure to the contaminated alcoholic beverages with different concentrations of methanol (0, 2, 4, and 6 wt %) and the changes in the observed colorful textures of the CLCs as well as the intensity of the output light. The proposed sensor is label free and rapid.

State-of-the-Art Development in Liquid Crystal Biochemical Sensors

As an emerging stimuli-responsive material, liquid crystal (LC) has attracted great attentions beyond display applications, especially in the area of biochemical sensors. Its high sensitivity and fast response to various biological or chemical analytes make it possible to fabricate a simple, real-time, label-free, and cost-effective LC-based detection platform. Advancements have been achieved in the development of LC-based sensors, both in fundamental research and practical applications. This paper briefly reviews the state-of-the-art research on LC sensors in the biochemical field, from basic properties of LC material to the detection mechanisms of LC sensors that are categorized into LC-solid, LC–aqueous, and LC droplet platforms. In addition, various analytes detected by LCs are presented as a proof of the application value, including metal ions, nucleic acids, proteins, glucose, and some toxic chemical substances. Furthermore, a machine-learning-assisted LC sensing platform is realized to provide a foundation for device intelligence and automatization. It is believed that a portable, convenient, and user-friendly LC-based biochemical sensing device will be achieved in the future.

DNA-Modified Liquid Crystal Droplets

In this work, we have combined the advantages of sequence programmability of DNA nanotechnology and optical birefringence of liquid crystals (LCs). Herein, DNA amphiphiles were adsorbed onto LC droplets. A unique phenomenon of LC droplet aggregation was demonstrated, using DNA-modified LC droplets, through complementary DNA hybridization. Further functionalization of DNA-modified LC droplets with a desired DNA sequence was used to detect a wide range of chemicals and biomolecules, such as Hg²⁺, thrombin, and enzymes, through LC droplet aggregation and vice versa, which can be seen through the naked eye. These DNA-modified LC droplets can be printed onto a desired patterned surface with temperature-induced responsiveness and reversibility. Overall, our work is the first to report DNA-modified LC droplet, which provides a general detection platform based on the development of DNA aptamers. Additionally, this work inspires the exploration of surface information visualization combined with microcontact printing.

Partial induced reorientation of 5CB in a liquid crystal microarray and a signal-on sensing assay for the detection of aflatoxin B1

Herein, a signal-on liquid crystal microarray (LCM) sensor is designed for the first time with a micro-spectral optical sensing signal. Depending on the change of the orientation of the LC molecules in the LCM films and the intensity of the spectral peaks of the PhCs, the signal-on LCM biosensor achieves the detection of AFB1 and the Partial Response Mechanism (PSM) of the LCM films is discovered.

Overview of Liquid Crystal Biosensors: From Basic Theory to Advanced Applications

Liquid crystals (LCs), as the remarkable optical materials possessing stimuli-responsive property and optical modulation property simultaneously, have been utilized to fabricate a wide variety of optical devices. Integrating the LCs and receptors together, LC biosensors aimed at detecting various biomolecules have been extensively explored. Compared with the traditional biosensing technologies, the LC biosensors are simple, visualized, and efficient. Owning to the irreplaceable superiorities, the research enthusiasm for the LC biosensors is rapidly rising. As a result, it is necessary to overview the development of the LC biosensors to guide future work. This article reviews the basic theory and advanced applications of LC biosensors. We first discuss different mesophases and geometries employed to fabricate LC biosensors, after which we introduce various detecting mechanisms involved in biomolecular detection. We then focus on diverse detection targets such as proteins, enzymes, nucleic acids, glucose, cholesterol, bile acids, and lipopolysaccharides. For each of these targets, the development history and state-of-the-art work are exhibited in detail. Finally, the current challenges and potential development directions of the LC biosensors are introduced briefly.

Technological Advancements in Bio‐recognition using Liquid Crystals: Techniques, Applications, and Performance

The application of liquid crystal (LC) materials has undergone a modern-day renaissance from its classical use in electronics industry as display devices to new-fangled techniques for optically detecting biological and chemical analytes. This review article deals with the emergence of LC materials as invaluable material for their use as label-free sensing elements in the development of optical, electro-optical and electrochemical biosensors. The property of LC molecules to change their orientation on perturbation by any external stimuli or on interaction with bioanalytes or chemical species has been utilized by many researches for the fabrication of high sensitive LC-biosensors. In this review article we categorized LC-biosensor based on biomolecular reaction mechanism viz. enzymatic, nucleotides and immunoreaction in conjunction with operating principle at different LC interface namely LC-solid, LC-aqueous and LC-droplets. Based on bimolecular reaction mechanism, the application of LC has been delineated with recent progress made in designing of LC-interface for the detection of bio and chemical analytes of proteins, virus, bacteria, clinically relevant compounds, heavy metal ions and environmental pollutants. The review briefly describes the experimental set-ups, sensitivity, specificity, limit of detection and linear range of various viable and conspicuous LC-based biosensor platforms with associated advantages and disadvantages therein.

Development and Application of Liquid Crystals as Stimuli-Responsive Sensors

This focused review presents various approaches or formats in which liquid crystals (LCs) have been used as stimuli-responsive sensors. In these sensors, the LC molecules adopt some well-defined arrangement based on the sensor composition and the chemistry of the system. The sensor usually consists of a molecule or functionality in the system that engages in some form of specific interaction with the analyte of interest. The presence of analyte brings about the specific interaction, which then triggers an orientational transition of the LC molecules, which is optically discernible via a polarized optical image that shows up as dark or bright, depending on the orientation of the LC molecules in the system (usually a homeotropic or planar arrangement). The various applications of LCs as biosensors for glucose, protein and peptide detection, biomarkers, drug molecules and metabolites are extensively reviewed. The review also presents applications of LC-based sensors in the detection of heavy metals, anionic species, gases, volatile organic compounds (VOCs), toxic substances and in pH monitoring. Additionally discussed are the various ways in which LCs have been used in the field of material science. Specific attention has been given to the sensing mechanism of each sensor and it is important to note that in all cases, LC-based sensing involves some form of orientational transition of the LC molecules in the presence of a given analyte. Finally, the review concludes by giving future perspectives on LC-based sensors.

Simple and Rapid Detection of Ibuprofen─A Typical Pharmaceuticals and Personal Care Products─by a Liquid Crystal Aptasensor

This work established a liquid crystal (LC) aptasensor for simple and rapid detection of ibuprofen, a typical pharmaceuticals and personal care products (PPCPs) pollutant. A negatively charged DNA aptamer specific for ibuprofen and a positively charged amphiphilic surfactant, hexadecyltrimethylammonium bromide (CTAB), were incubated with the sample and then directly added onto the LC interface. In the presence of ibuprofen, the specific binding of ibuprofen with the DNA aptamer will release CTAB, which then adsorbed at the LC-aqueous interface and induced the orientational change of LCs to homeotropic orientation with a dark optical signal output. While in the absence of ibuprofen, the DNA aptamer binds with CTAB through hydrophobic and electrostatic interactions, LCs remained in the planar orientation with a bright optical signal output. This LC aptasensor also has good specificity for ibuprofen and can even detect ibuprofen drug in tap water. Moreover, the response time of the LC aptasensor is fast in minutes. Additionally, this LC aptasensor benefits in monitoring the water quality and inspires the exploration of a general platform for PPCPs detection.

A cationic surfactant-decorated liquid crystal-based sensor for sensitive detection of quinoline yellow

Quinoline yellow (QY) is one of the popular synthetic food colorants and in food industry greatly used. Developing accurate and simple QY detection procedures is of major considerable importance in ensuring food safety. Hence, it is important to detect this food colorant effectively to reduce risk. Herein, an innovative liquid crystal (LC)-based sensor was designed for the label-free and ultra-sensitive detecting of the QY by means of a cationic surfactant-decorated LC interface. The nematic liquid crystal in touch with CTAB revealed a homeotropic alignment, when QY was injected into the LC-cell, the homeotropic alignment consequently altered to a planar one by electrostatic interactions between QY and CTAB. The designed LC-based sensor detected QY at the too much trace level as low as 0.5 fM with analogous selectivity. The suggested LC-based sensor is a rapid, convenient and simple procedure for label-free detection of QY in food industrial and safety control application.

Distinct interfacial ordering of liquid crystals observed by protein-lipid interactions that enabled the label-free sensing of cytoplasmic protein at the liquid crystal-aqueous interface

Interfaces formed between a lipid decorated liquid crystal (LC) film and an aqueous phase can mimic the bimolecular membrane where interfacially occurring biological phenomena (e.g., lipid-protein interactions, protein adsorption) can be visually monitored by observing the surface-sensitive orientations of LCs. The ordering behavior of LCs at different phospholipid-based LC interfaces (1,2-dilauroyl-sn-glycero-3-phosphocholine (DLPC) and lysophosphatidic acid (LPA)) were investigated to determine the sensing of an important cytoplasmic protein (juxtamembrane of epidermal growth factor receptor (JM-EGFR)). At both DLPC and LPA decorated interfaces, the LC adopts homeotropic ordering, causing a dark optical appearance under crossed polarizers. Interestingly, upon the introduction of JM-EGFR to these LC-aqueous interfaces, the homeotropic orientation of the LC changed to planar (bright optical appearance), suggesting the potential of the designed system for JM-EGFR sensing. The use of different lipid decorated LC-aqueous interfaces results in the emergence of distinct optical patterns. For example, at a DLPC laden interface, elongated bright domains are observed, whereas a uniform bright texture is observed on an LPA laden interface. The DLPC decorated LC-aqueous interface is found to be highly selective for the sensing of JM-EGFR with a detection limit in the nanomolar concentration region (∼ 50 nM). When compared to spectroscopic and other conventional techniques, the LC-based design is simpler, and it allows the simple and label-free optical sensing of JM-EGFR at fluidic interfaces.

Control of Liquid Crystal Microarray Optical Signals Using a Microspectral Mode Based on Photonic Crystal Structures

Herein, a novel liquid crystal microarray (LCM) film with optical regulation ability is first constructed by combining liquid crystals (LC) and the highly ordered microporous structure of inverse opal photonic crystals (IOPhCs). The LCM films are fabricated by infiltrating LC molecules into the LC polymer with the structure of IOPhCs, and their properties are very different from those without the LC. Interestingly, the optical property of LCM films can be controlled by changing the orientation of LC molecules, which varies with the interfacial force. In combination with polarization images, spectral reflection peak, circular dichroism spectra, potential difference, and fluorescence images of LCM films, the mechanism of this change is investigated. It is found that the exposed basic group of single-stranded DNA is the key to the change of the optical property of LC microarrays. Meanwhile, the optical signals of LC microarrays based on the PhCs provide a novel LC signal mode for an LC sensing system (microspectral signal mode), and it can be recorded by a fiber-optic spectrometer, which is a great improvement on LC sensing signals. Therefore, the LC microarray sensing signal can be used for accurate analysis of targets by the change of the reflection peak intensity of PhCs. When the LC molecules are induced by different aptamers, the LC microarray sensing interface can be further used for the determination of different targets, such as cocaine and Hg²⁺. The research on LCM films is of significant value for the development of LC sensing technology and also shows great application prospects in biochemical sensing fields.

Applications of liquid crystals in biosensing

Liquid crystals (LCs), as a promising branch of highly-sensitive, quick-response, and low-cost materials, are widely applied to the detection of weak external stimuli and have attracted significant attention. Over the past decade, many research groups have been devoted to developing LC-based biosensors due to their self-assembly potential and functional diversity. In this paper, recent investigations on the design and application of LC-based biosensors are reviewed, based on the phenomenon that the orientation of LCs can be directly influenced by the interactions between biomolecules and LC molecules. The sensing principle of LC-based biosensors, as well as their signal detection by probing interfacial interactions, is described to convert, amplify, and quantify the information from targets into optical and electrical parameters. Furthermore, commonly-used LC biosensing targets are introduced, including glucose, proteins, enzymes, nucleic acids, cells, microorganisms, ions, and other micromolecules that are critical to human health. Due to their self-assembly potential, chemical diversity, and high sensitivity, it has been reported that tunable stimuli-responsive LC biosensors show bright perspectives and high superiorities in biological applications. Finally, challenges and future prospects are discussed for the fabrication and application of LC biosensors to both enhance their performance and to realize their promise in the biosensing industry.

Development and Applications of Fluorogen/Light-Up RNA Aptamer Pairs for RNA Detection and More

The central role of RNA in living systems made it highly desirable to have noninvasive and sensitive technologies allowing for imaging the synthesis and the location of these molecules in living cells. This need motivated the development of small pro-fluorescent molecules called "fluorogens" that become fluorescent upon binding to genetically encodable RNAs called "light-up aptamers." Yet, the development of these fluorogen/light-up RNA pairs is a long and thorough process starting with the careful design of the fluorogen and pursued by the selection of a specific and efficient synthetic aptamer. This chapter summarizes the main design and the selection strategies used up to now prior to introducing the main pairs. Then, the vast application potential of these molecules for live-cell RNA imaging and other applications is presented and discussed.

A Label-Free Liquid Crystal Biosensor Based on Specific DNA Aptamer Probes for Sensitive Detection of Amoxicillin Antibiotic

We developed a liquid crystal (LC) aptamer biosensor for the sensitive detection of amoxicillin (AMX). The AMX aptamer was immobilized onto the surface of a glass slide modified with a mixed self-assembled layer of dimethyloctadecyl [3-(trimethoxysilyl) propyl] ammonium chloride (DMOAP) and (3-aminopropyl) triethoxysilane (APTES). The long alkyl chains of DMOAP maintained the LC molecules in a homeotropic orientation and induced a dark optical appearance under a polarized light microscope (POM). In the presence of AMX, the specific binding of the aptamer and AMX molecules induced a conformational change in the aptamers, leading to the disruption of the homeotropic orientation of LCs, resulting in a bright optical appearance. The developed aptasensor showed high specificity and a low detection limit of 3.5 nM. Moreover, the potential application of the developed aptasensor for the detection of AMX in environmental samples was also demonstrated. Therefore, the proposed aptasensor is a promising platform for simple, rapid, and label-free monitoring of AMX in an actual water environment with high selectivity and sensitivity.

A Cationic Surfactant-Decorated Liquid Crystal-Based Aptasensor for Label-Free Detection of Malathion Pesticides in Environmental Samples

We report a liquid crystal (LC)-based aptasensor for the detection of malathion using a cationic surfactant-decorated LC interface. In this method, LCs displayed dark optical images when in contact with aqueous cetyltrimethylammonium bromide (CTAB) solution due to the formation of a self-assembled CTAB monolayer at the aqueous/LC interface, which induced the homeotropic orientation of LCs. With the addition of malathion aptamer, the homeotropic orientation of LCs changed to a planar one due to the interactions between CTAB and the aptamer, resulting in a bright optical image. In the presence of malathion, the formation of aptamer-malathion complexes caused a conformational change of the aptamers, thereby weakening the interactions between CTAB and the aptamers. Therefore, CTAB is free to induce a homeotropic ordering of the LCs, which corresponds to a dark optical image. The developed sensor exhibited high specificity for malathion determination and a low detection limit of 0.465 nM was achieved. Moreover, the proposed biosensor was successfully applied to detect malathion in tap water, river water, and apple samples. The proposed LC-based aptasensor is a simple, rapid, and convenient platform for label-free monitoring of malathion in environmental samples.

Liquid crystal-based sensing platform for detection of Pb2+ assisted by DNAzyme and rolling circle amplification

Lead ions (Pb²⁺) are one of the most widespread heavy metal contaminants that pose detrimental impact on environment and human health. We demonstrate a highly sensitive and specific liquid crystal (LC)-based sensing platform for detecting Pb²⁺ assisted by DNAzyme and rolling circle amplification (RCA). Magnetic beads (MBs) are functionalized with DNA duplexes of the catalytic strands (DNAzymes) and the substrate strands. In the presence of Pb²⁺, the substrate strands are disassembled due to activation of the DNAzyme, which allows initiation of DNA RCA on MBs. The amplified DNA strands can disrupt arrangement of octadecy trimethyl ammonium bromide monolayers (OTAB), thereby inducing planar orientation of LC molecules at the interface of aqueous and LCs. Thus, LCs exhibit bright appearance. In contrast, RCA cannot be triggered in the absence of Pb²⁺. Therefore, LC molecules adopt perpendicular orientation at the interface, which induces the dark morphology of LCs. The limit of detection reaches as low as 16.7 pM. It is an improvement of more than two orders of magnitude compared to that of previously reported LC-based sensing approaches. This approach also shows excellent performance in monitoring Pb²⁺ in tap water and lake water.

Flexible DNA Hydrogel SERS Active Biofilms for Conformal Ultrasensitive Detection of Uranyl Ions from Aquatic Products

It is of great significance to sensitively and conveniently detect trace UO₂²⁺ ions in biological and environmental samples due to severe health risks. However, such suitable sensors are still scarce. In this work, DNAzyme-based hydrogels modified on Ag NP-grafted PAN nanorods array as flexible SERS biosensor have been developed for ultrasensitive UO₂²⁺ ion detection. They were first formed by the substrate strand and enzyme strand comprising the main cleavage-reaction stem-loop complex. Then, a UO₂²⁺ ions responsive smart hydrogel capsule was achieved by DNAzyme complex hybridized with DNA polyacrylamide chains. Raman reporter RhB was introduced and intentionally trapped inside the hydrogel. In the absence of UO₂²⁺ ions, a tiny Raman signal was presented because RhB was trapped inside the hydrogel and far away from SERS substrates. Conversely, the responsive hydrogel could be specifically attacked by UO₂²⁺ ions to release RhB, leading to a strong Raman signal. With the amplified signal procedure, this flexible SERS biofilm accomplished sensitive and selective detection of UO₂²⁺ ions with a wide linear range from 1 pM to 0.1 μM and a low detection limit of 0.838 pM. This result is nearly five orders below the EPA-defined maximum contaminant level (180 nM). Furthermore, this biofilm gives full play to the advantages of a flexible biosensor. It can directly detect the aquatic products (such as fish and kelp) polluted by UO₂²⁺ ions, demonstrating that this flexible SERS biofilm has promising potential for applications in a rapid environmental safety inspection.