Bioinspired Surface Functionalization of Titanium for Enhanced Lubrication and Sustained Drug Release

A biomimetic lubricating nanosystem for synergistic therapy of osteoarthritis

Failure of articular cartilage lubrication and inflammation are the main causes of osteoarthritis (OA), and integrated treatment realizing joint lubrication and anti-inflammation is becoming the most effective treat model. Inspired by low friction of human synovial fluid and adhesive chemical effect of mussels, our work reports a biomimetic lubricating system that realizes long-time lubrication, photothermal responsiveness and anti-inflammation property. To build the system, a dopamine-mediated strategy is developed to controllably graft hyaluronic acid on the surface of metal organic framework. The design constructs a biomimetic core-shell structure that has good dispersity and stability in water with a high drug loading ratio of 99%. Temperature of the solution rapidly increases to 55 °C under near-infrared light, and the hard-soft lubricating system well adheres to wear surfaces, and greatly reduces frictional coefficient by 75% for more than 7200 times without failure. Cell experiments show that the nanosystem enters cells by endocytosis, and releases medication in a sustained manner. The anti-inflammatory outcomes validate that the nanosystem prevents the progression of OA by down-regulating catabolic proteases and pain-related genes and up-regulating genes that are anabolic in cartilage. The study provides a bioinspired strategy to employ metal organic framework with controlled surface and structure for friction reduction and anti-inflammation, and develops a new concept of OA synergistic therapy model for practical applications.

Comparative Study on the Lubrication Mechanism and Performance of Two Representative Ionic and Nonionic Self-Adhesive Polymer Coatings

Surface modification of lubricating coatings on biomedical devices is a pivotal strategy to improve the overall performance and clinical efficacy, significantly reducing friction between devices and human tissues and mitigating tissue damage during intervention and long-term implantation. Recently, various hydrophilic polymeric materials have been used for achieving surface functionalization, endowing the biomedical device with excellent superlubrication performance. N-Vinylpyrrolidone (NVP) and 2-methacryloyloxyethyl phosphorylcholine (MPC) are two typical representatives of nonionic and zwitterionic materials. However, there is still a research gap in a comparative study of the lubrication mechanisms and properties between them. In this study, a bioinspired and dopamine-assisted codeposition technique was used to fabricate biomimetic hydrophilic coatings, including P(DMA-NVP) and P(DMA-MPC), on polyurethane. To achieve a thorough comparative analysis of the self-adhesive coating performance, 3 M ratios of the copolymers were synthesized and comprehensive material evaluations were conducted. Additionally, surface morphology, hydrophilicity, and lubrication at both the microscale and macroscale were performed. It was found that both hydrophilic coatings exhibited good stability. The P(DMA-MPC) coating, due to the ability to attract and bind a large number of water molecules, demonstrated superior lubrication effects compared to the P(DMA-NVP) coating. The study provides an in-depth understanding of the lubrication behavior of the self-adhesive coatings to enhance the functionality and application in biomedical engineering.

An Investigation into the Relative Efficacy of High-Velocity Air-Fuel-Sprayed Hydroxyapatite Implants Based on the Crystallinity Index, Residual Stress, Wear, and In-Flight Powder Particle Behavior

Due to its resemblance to the bone, hydroxyapatite (HA) has been widely used for bioactive surface modification of orthopedic implants. However, it undergoes significant thermal decomposition and phase transformations at a high operating temperature, leading to premature implant failure. This investigation uses high-velocity air-fuel (HVAF) spray, an emerging low-temperature thermal spray technique, to deposit HA over the Ti-6Al-4V substrate. Coating characteristics, such as the crystallinity index and phase analysis, were measured using X-ray diffraction, Raman analysis, and Fourier transform infrared spectroscopy, residual stress using the sin2ψ method, and tribological performance by a fretting wear test. The coating retained an over 90% crystallinity index, a crystallite size of 41.04 nm, a compressive residual stress of -229 ± 34.5 MPa, and a wear rate of 1.532 × 10-3 mm3 N-1 m-1. Computational in-flight particle traits of HA particles (5 to 60 μm) were analyzed using computational fluid dynamics; it showed that 90% of particles were deposited at a 700 to 1000 m/s velocity and a 900 to 1450 K temperature with a 2.1 ms mean residence time. In-flight particle oxidation was minimized, and particle impact deformation was maximized, which caused severe plastic deformation, forming crystalline, compressive residual stressed coatings. The thermal decomposition model of low-temperature HVAF-sprayed HA particles helped to understand the implants' crystallinity index, residual stress, and tribological characteristics. Hence, this experimental and computational analysis shows that the HVAF process can be a promising candidate for biomedical applications for having strong and durable implants.

Superlubricity of Materials: Progress, Potential, and Challenges

This review paper provides a comprehensive overview of the phenomenon of superlubricity, its associated material characteristics, and its potential applications. Superlubricity, the state of near-zero friction between two surfaces, presents significant potential for enhancing the efficiency of mechanical systems, thus attracting significant attention in both academic and industrial realms. We explore the atomic/molecular structures that enable this characteristic and discuss notable superlubric materials, including graphite, diamond-like carbon, and advanced engineering composites. The review further elaborates on the methods of achieving superlubricity at both nanoscale and macroscale levels, highlighting the influence of environmental conditions. We also discuss superlubricity's applications, ranging from mechanical systems to energy conservation and biomedical applications. Despite the promising potential, the realization of superlubricity is laden with challenges. We address these technical difficulties, specifically those related to achieving and maintaining superlubricity, and the issues encountered in scaling up for industrial applications. The paper also underscores the sustainability concerns associated with superlubricity and proposes potential solutions. We conclude with a discussion of the possible future research directions and the impact of technological innovations in this field. This review thus provides a valuable resource for researchers and industry professionals engaged in the development and application of superlubric materials.

A snowboard-inspired lubricating nanosystem with responsive drug release for osteoarthritis therapy

Most of present works of osteoarthritis (OA) therapy are focusing on reducing friction and improving drug loading capacity, while little attention is paid to realizing long-time lubrication and on-demand drug release. In this study, inspired by snowboards with good solid-liquid interface lubrication, a fluorinated graphene based nanosystem with dual functions of long-time lubrication and thermal-responsive drug release was constructed for OA synergetic therapy. An aminated polyethylene glycol bridging strategy was developed to enable covalent grafting of hyaluronic acid on fluorinated graphene. This design not only greatly increased the nanosystem's biocompatibility, but also reduced the coefficient of friction (COF) by 83.3 % compared to H₂O. The nanosystem showed long-time and steady aqueous lubrication behavior even after more than 24,000 times of friction tests, and a low COF of 0.13 was obtained with over 90% wear volume reduction. Diclofenac sodium was controllably loaded and sustained drug release was tuned by near-infrared light. Moreover, anti-inflammation results showed that the nanosystem had good protective effect on inhibiting OA deterioration, which could up-regulate cartilage anabolic genes of Col2α and aggrecan while down-regulating catabolic proteases genes of TAC1 and MMP1. This work constructs a novel dual-functional nanosystem that realizes friction and wear reduction with long lubrication life, and shows thermal-responsive on-demand drug release with good synergistic therapeutic effect of OA.

A Biomimetic Lubricating Nanosystem with Responsive Drug Release for Osteoarthritis Synergistic Therapy

Osteoarthritis (OA) is associated with lubrication failure of articular cartilage and severe inflammatory response of joint capsule. Synergistic therapy combining joint lubrication and anti-inflammation emerges as a novel treatment of OA. In this study, bioinspired by ultralow friction of natural articular synovial fluid and mussel adhesion chemistry, a biomimetic nanosystem with dual functions of enhanced lubrication and stimuli-responsive drug release is developed. A dopamine mediated strategy realizes one step biomimetic grafting of hyaluronic acid (HA) on fluorinated graphene. The polymer modified sheets exhibit highly efficient near-infrared absorption, and show steady lubrication with a long time under various working conditions, in which the coefficient of friction is reduced by 75% compared to H₂ O. Diclofenac sodium (DS) with a high loading capacity of 29.2% is controllably loaded, and responsive and sustained drug release is adjusted by near-infrared light. Cell experiments reveal that the lubricating nanosystem is taken up by endocytosis, and anti-inflammation results confirm that the nanosystem inhibits osteoarthritis deterioration by upregulating cartilage anabolic gene and downregulating catabolic proteases and pain-related gene. This work proposes a promising biomimetic approach to integrate polymer modified fluorinated graphene as a dual-functional nanosystem for effective synergistic therapy of OA.

Bioinspired Self-Adhesive Lubricated Coating for the Surface Functionalization of Implanted Biomedical Devices

The lubrication property of implanted biomedical devices is of great significance as it affects the clinical performance owing to direct contact with soft tissues. In the present study, a bioinspired copolymer with dual functions of both self-adhesion and lubrication was synthesized with N-(3-aminopropyl) methacrylamide hydrochloride, gallic acid, and 3-[dimethyl-[2-(2-methylprop-2-enoyloxy) ethyl] azaniumyl] propane-1-sulfonate by free radical polymerization and a carbodiimide coupling reaction. The copolymer was further modified on the surface of poly(vinyl chloride) (PVC) samples using a simple dip-coating method and was characterized by different evaluations including Fourier transform infrared spectroscopy, the water contact angle, X-ray photoelectron spectroscopy, optical interferometry, and atomic force microscopy. Additionally, the results of a series of tribological tests at the microscopic level demonstrated that the friction coefficient of the copolymer-coated PVC samples was significantly reduced compared to that of the bare PVC samples. Furthermore, the pull out test at the macroscopic level was performed using copolymer-coated PVC catheters on a poly(dimethylsiloxane)-based test rig, and the result showed that the copolymer-coated PVC catheters were endowed with a greatly decreased and much more stable pull out force compared with that of the bare PVC catheters. In conclusion, the bioinspired self-adhesive lubricated coating developed herein may be applied as a universal and versatile method to enhance the lubrication performance of implanted biomedical devices.

Bioinspired Nanospheres as Anti-inflammation and Antisenescence Interfacial Biolubricant for Treating Temporomandibular Joint Osteoarthritis

The development of temporomandibular joint (TMJ) osteoarthritis is highly associated with mechanical overloading, which can result in accelerated cartilage degradation and damage due to increased interfacial friction and the release of inflammatory factors and catabolic enzymes. In the present study, we for the first time developed self-assembled drug-free nanospheres with pharmaceutical-active functions, which could be used as an intra-articularly injected biolubricant for the treatment of TMJ osteoarthritis based on a synergistic therapy of enhanced lubrication, anti-inflammation, and antisenescence. The nanospheres possessed the hydrophobic core of dopamine methacrylamide and the hydrophilic shell of sulfobetaine methacrylate, which formed into spherical aggregates in aqueous solution by specific interactions following reversible addition-fragmentation chain transfer polymerization. The biodegradation test, tribological test, and free radical scavenging test showed that the nanospheres were endowed with physiological stability, lubrication enhancement, and free radical scavenging capability. In addition, the in vitro cell test revealed that the nanospheres alleviated inflammatory and senescent phenotype for inflammation and oxidative stress stimulated chondrocytes. Furthermore, the in vivo animal test indicated that the nanospheres, after intra-articular injection into TMJ with an osteoarthritis environment, effectively protected condylar cartilage and subchondral bone from structural damage and attenuated cartilage matrix degradation and aging. In summary, the self-assembled nanospheres might be used as a promising biolubricant for achieving anti-inflammatory and antisenescent treatment of TMJ osteoarthritis.

Construction of Core-Shell NanoMOFs@microgel for Aqueous Lubrication and Thermal-Responsive Drug Release

The construction of porous nanocarriers with good lubricating performance and stimuli-responsive drug release is significant for the synergetic therapy of osteoarthritis (OA). Although metal-organic framework nanoparticles (nanoMOFs) as carriers can support drug delivery, achieving the synergy of aqueous lubrication and stimuli-responsive drug release is challenging. In this work, a core-shell nanoMOFs@poly(N-isopropylacrylamide) (PNIPAm) microgel hybrid via one-pot soap-free emulsion polymerization is developed. Programmable growth of the PNIPAm microgel layer on the surface of nanoMOFs is achieved by tuning the concentration of the monomer and the crosslinker in the reaction. Reversible swelling-collapsing behaviors of the hybrid are realized by tuning the temperature below and above the lower critical solution temperature. When used as water lubrication additives, the hybrid enables reductions in both the coefficient of friction and wear volume. In vitro thermal-responsive drug release is demonstrated on the diclofenac sodium-loaded hybrid by controlling the swelling and collapsing states of the PNIPAm nanolayer. Moreover, the good biocompatibility of the hybrid is verified by culturing toward HeLa and BEAS-2B cells. These results establish a nanoMOFs@microgel hybrid that can achieve friction and wear reduction and thermal-responsive drug release.

Cononsolvency of Poly[2-(methacryloyloxy)ethyl phosphorylcholine] in Ethanol-Water Mixtures: A Neutron Reflectivity Study

Molecular mechanisms underlying the cononsolvency, a re-entrant coil-to-globule-to-coil conformational transition of polymer chains in mixtures of two good solvents, of poly[2-(methacryloyloxy)ethyl phosphorylcholine] (PMPC) in ethanol-water binary mixtures were complementarily investigated. This was accomplished by following a statistical mechanical model for competitive hydrogen bonding combined with the cooperative solvation concept as well as neutron reflectivity (NR) experiments employing contrast variation in the cononsolvents. The experimental re-entrant aggregation of the PMPC chains in ethanol-water mixed solvents, obtained on the basis of turbidity was accurately reproduced by theoretical calculations. The calculation proved the relatively strong cooperativity of ethanol and the preferential interaction of water, while the total coverage of solvents was the lowest at an ethanol volume fraction (f_ethanol) of 0.90. At this level, the cononsolvency was the most significant, and the collapsed PMPC chains were solvated with more water than the bulk mixed solvent. The ethanol-water cononsolvency for the PMPC brushes on a planar silicon wafer was investigated by NR experiments, and the solvent composition involved in the collapsed PMPC brush was addressed according to the contrast variation study with mixed solvents of water, deuterium oxide, ethanol-d₅, and ethanol-d₆. The collapsed PMPC brushes at f_ethanol = 0.90 contained more water than the bulk solvent. The preferential distribution of water in the collapsed PMPC brush was consistent with the simulation results. Therefore, the molecular mechanism for the cononsolvency of PMPC in ethanol-water mixed solvents based on competitive hydrogen bonding coupled with cooperative solvation was experimentally rationalized.

Cellular studies and sustained drug delivery via nanostructures fabricated on 3D printed porous Neovius lattices of Ti6Al4V ELI

Site-specific drug delivery has the potential to reduce drug dosage by 3 to 5-folds. Given the propensity of drugs used in the treatment of tuberculosis and cancers, the increased drug dosages via oral ingestion for several months to a few years of medication is often detrimental to the health of patients. In this study, the sustained delivery of drugs with multiscale structured novel Neovius lattices was achieved. 3D Neovius Open Cell Lattices (NOCL) with porosities of 40, 45, and 50 % were fabricated layer-by-layer on the laser bed fusion process. Micron-sized Ti6Al4V Eli powder was used for 3D printing. The Young's modulus achieved from the novel Neovius lattices were in the range of 1.2 to 1.6 GPa, which is comparable to human cortical bone and helps to improve implant failure due to the stress shielding effect. To provide sustained drug delivery, nanotubes (NTs) were fabricated on NOCLs via high-voltage anodisation. The osteogenic agent icariin was loaded onto the NOCL-NT samples and their release profiles were studied for 7 days. A significantly steady and slow release rate of 0.05% per hour of the drug was achieved using NOCL-NT. In addition, the initial burst release of NOCL-NT was 4 fold lower than that of the open-cell lattices without nanotubes. Cellular studies using MG63 human osteoblast-like cells were performed to determine their biocompatibility and osteogenesis which were analysed using Calcein AM staining and Alamar Blue after 1, 5, and 7 days. 3D printed NOCL samples with NTs and with Icariin loaded NTs demonstrated a significant increase in cell proliferation as compared to as printed NOCL samples.

Bioinspired Phosphorylcholine Coating for Surface Functionalization of Interventional Biomedical Implants with Bacterial Resistance and Anti-Encrustation Properties

Enhancing the lubrication property and bacterial resistance is extremely important for interventional biomedical implants to avoid soft tissue damage and biofilm formation. In this study, a zwitterionic phosphorylcholine coating (PMPC) was successfully developed to achieve surface functionalization of a polyurethane (PU)-based ureteral stent via subsurface "grafting from" photopolymerization. Typical surface characterizations such as Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and surface wettability and morphology analyses examined by scanning electron microscopy, atomic force microscopy, and transmission electron microscopy demonstrated that the phosphorylcholine polymer was grafted on the substrate with a thickness of 180 nm. Additionally, the tribological experiment performed by a universal material tester showed that the lubrication performance of PU-PMPC was significantly improved compared with that of PU. The in vitro experiments indicated that the PMPC coating was biocompatible and stably modified on the surface of the substrate with an excellent bacterial resistance rate of >90%. Furthermore, the result of the in vivo experiment showed that the anti-encrustation performance of the surface-functionalized ureteral stent was better than that of the bare ureteral stent. The great enhancement in the lubrication, bacterial resistance, and anti-encrustation properties of the phosphorylcholine coating was thought to be due to the hydration effects of the zwitterionic charges. In summary, the bioinspired zwitterionic phosphorylcholine coating developed herein achieved significantly improved lubrication, bacterial resistance, and anti-encrustation performances and could be used as a convenient approach for surface functionalization of interventional biomedical implants.

Fabrication of a Hydrophilic Low-Friction Poly(hydroxyethyl methacrylate) Coating on Silicon Rubber

Silicon rubber has been widely used in the biomedical field due to its excellent mechanical properties and physiological inertia. However, the hydrophobic properties of silicon rubber surfaces limit their further application. Therefore, constructing a silicon rubber coating with hydrophilic and low-friction surface properties would be highly significant. Existing methods to achieve such coatings, including grafting polymer brushes and the deposition of hydrophilic materials, suffer from several deficiencies such as complicated coating processes and insufficient coating firmness. In this paper, we report a hydrophilic polymer poly(hydroxyethyl methacrylate) (PHEMA) coating that can easily coat the surface of silicon rubber to provide low-friction performance. Sample silicon rubber was treated with benzophenone and hydroxyethyl methacrylate monomer solution in turn. The as-prepared coating was characterized by infrared spectroscopy, X-ray photoelectron spectroscopy, white light interference, and MFT-5000 wear test. The results indicated that the PHEMA coating had excellent hydrophilic properties (with a low contact angle of 9.39°) compared to uncoated silicon rubber. As the concentration of glycerol in the monomer solution was increased, the thickness and surface roughness of the as-prepared coating gradually decreased. The coating was firmly adsorbed on the substrate, and it had a zero-class bonding strength. In addition, the as-prepared coating demonstrated good friction-reduced properties, with the coefficient of friction being reduced by 98.0% compared with the uncoated silicon rubber in simulated blood. In summary, a hydrophilic and low-friction coating was successfully prepared using a simple method, and the results reported herein provide valuable insight into the surface design of similar soft materials.

Biomimetic injectable hydrogel microspheres with enhanced lubrication and controllable drug release for the treatment of osteoarthritis

The occurrence of osteoarthritis (OA) is highly associated with the reduced lubrication property of the joint, where a progressive and irreversible damage of the articular cartilage and consecutive inflammatory response dominate the mechanism. In this study, bioinspired by the super-lubrication property of cartilage and catecholamine chemistry of mussel, we successfully developed injectable hydrogel microspheres with enhanced lubrication and controllable drug release for OA treatment. Particularly, the lubricating microspheres (GelMA@DMA-MPC) were fabricated by dip coating a self-adhesive polymer (DMA-MPC, synthesized by free radical copolymerization) on superficial surface of photo-crosslinked methacrylate gelatin hydrogel microspheres (GelMA, prepared via microfluidic technology), and encapsulated with an anti-inflammatory drug of diclofenac sodium (DS) to achieve the dual-functional performance. The tribological test and drug release test showed the enhanced lubrication and sustained drug release of the GelMA@DMA-MPC microspheres. In addition, the functionalized microspheres were intra-articularly injected into the rat knee joint with an OA model, and the biological tests including qRT-PCR, immunofluorescence staining assay, X-ray radiography and histological staining assay all revealed that the biocompatible microspheres provided significant therapeutic effect against the development of OA. In summary, the injectable hydrogel microspheres developed herein greatly improved lubrication and achieved sustained local drug release, therefore representing a facile and promising technique for the treatment of OA.

Self-adhesive lubricated coating for enhanced bacterial resistance

Limited surface lubrication and bacterial biofilm formation pose great challenges to biomedical implants. Although hydrophilic lubricated coatings and bacterial resistance coatings have been reported, the harsh and tedious synthesis greatly compromises their application, and more importantly, the bacterial resistance property has seldom been investigated in combination with the lubrication property. In this study, bioinspired by the performances of mussel and articular cartilage, we successfully synthesized self-adhesive lubricated coating and simultaneously achieved optimal lubrication and bacterial resistance properties. Additionally, we reported the mechanism of bacterial resistance on the nanoscale by studying the adhesion interactions between biomimetic coating and hydrophilic/hydrophobic tip or living bacteria via atomic force microscopy. In summary, the self-adhesive lubricated coating can effectively enhance lubrication and bacterial resistance performances based on hydration lubrication and hydration repulsion, and represent a universal and facial strategy for surface functionalization of biomedical implants.

Ball-Bearing-Inspired Polyampholyte-Modified Microspheres as Bio-Lubricants Attenuate Osteoarthritis

Osteoarthritis, a lubrication dysfunction related disorder in joint, is characterized by articular cartilage degradation and joint capsule inflammation. Enhancing joint lubrication, combined with anti-inflammatory therapy, is considered as an effective strategy for osteoarthritis treatment. Herein, based on the ball-bearing-inspired superlubricity and the mussel-inspired adhesion, a superlubricated microsphere, i.e., poly (dopamine methacrylamide-to-sulfobetaine methacrylate)-grafted microfluidic gelatin methacrylate sphere (MGS@DMA-SBMA), is developed by fabricating a monodisperse, size-uniform microsphere using the microfluidic technology, and then a spontaneously modified microsphere with DMA-SBMA copolymer by a one-step biomimetic grafting approach. The microspheres are endowed with enhanced lubrication due to the tenacious hydration layer formed around the charged headgroups (-N⁺ (CH₃ )₂ - and -SO₃^- ) of the grafted poly sulfobetaine methacrylate (pSBMA), and simultaneously are capable of efficient drug loading and release capability due to their porous structure. Importantly, the grafting of pSBMA enables the microspheres with preferable properties (i.e., enhanced lubrication, reduced degradation, and sustained drug release) that are highly desirable for intraarticular treatment of osteoarthritis. In addition, when loaded with diclofenac sodium, the superlubricated microspheres with excellent biocompatibility can inhibit the tumor necrosis factor α (TNF-α)-induced chondrocyte degradation in vitro, and further exert a therapeutic effect toward osteoarthritis in vivo.

Bioinspired Surface Functionalization of Titanium Alloy for Enhanced Lubrication and Bacterial Resistance

In clinics it is extremely important for implanted devices to achieve the property of enhanced lubrication and bacterial resistance; however, such a strategy has rarely been reported in previous literature. In the present study, a surface functionalization method, motivated by articular cartilage-inspired superlubrication and mussel-inspired adhesion, was proposed to modify titanium alloy (Ti6Al4V) using the copolymer (DMA-MPC) synthesized via free radical copolymerization. The copolymer-coated Ti6Al4V (Ti6Al4V@DMA-MPC) was evaluated by X-ray photoelectron spectroscopy, water contact angle, and Raman spectra to confirm that the DMA-MPC copolymer was successfully coated onto the Ti6Al4V substrate. In addition, the tribological test, with the polystyrene microsphere and Ti6Al4V or Ti6Al4V@DMA-MPC as the tribopair, indicated that the friction coefficient was greatly reduced for Ti6Al4V@DMA-MPC. Furthermore, the bacterial resistance test showed that bacterial attachment was significantly inhibited for Ti6Al4V@DMA-MPC for the three types of bacteria tested. The enhanced lubrication and bacterial resistance of Ti6Al4V@DMA-MPC was due to the tenacious hydration shell formed surrounding the zwitterionic charges in the phosphorylcholine group of the DMA-MPC copolymer. In summary, a bioinspired surface functionalization strategy is developed in this study, which can act as a universal and promising method to achieve enhanced lubrication and bacterial resistance for biomedical implants.