Toward a Better Understanding of the Nature-Inspired Aquaporin Biomimetic Membrane

Proteoliposome-Incorporated Seawater Reverse Osmosis Polyamide Membrane: Is the Aquaporin Water Channel Effect in Improving Membrane Performance Overestimated?

The water channel feature of the aquaporin (AQP) is considered to be the key in improving the permselectivity of AQP-based thin-film composite (TFC) polyamide (PA) membranes, yet much less attention has been paid to the physicochemical property changes of the PA layer induced by AQP-reconstituted proteoliposomes. This study systematically investigated the roles of proteoliposome constituents (liposome/detergent/AQP) in affecting the physicochemical properties and performance of the membranes. For the first time, we demonstrated that the constituents in the proteoliposome could facilitate the formation of a PA layer with enlarged protuberances and thinner crumples, resulting in a 79% increase in effective surface area and lowering of hydraulic resistance for filtration. These PA structural changes of the AQP-based membrane were found to contribute over 70% to the water permeability increase via comparing the separation performance of the membranes prepared with liposome, detergent, and proteoliposome, respectively, and one proteoliposome-ruptured membrane. The contribution from the AQP water channel feature was about 27% of water permeability increase in the current study, attributed to only ∼20% vesicle coverage in the PA matrix, and this contribution may be easily lost as a result of vesicle rupture during the real seawater reverse osmosis process. This study reveals that the changed morphology dominates the performance improvement of the AQP-based PA membrane and well explains why the actual AQP-based PA membranes cannot acquire the theoretical water/salt selectivity of a biomimetic AQP membrane, deepening our understanding of the AQP-based membranes.

Self-standing, conducting and capacitive biomimetic hybrid nanomembranes for selective molecular ion separation

Hybrid free-standing biomimetic materials are developed by integrating the VDAC36 β-barrel protein into robust and flexible three-layered polymer nanomembranes. The first and third layers are prepared by spin-coating a mixture of poly(lactic acid) (PLA) and poly(vinyl alcohol) (PVA). PVA nanofeatures are transformed into controlled nanoperforations by solvent-etching. The two nanoperforated PLA layers are separated by an electroactive layer, which is successfully electropolymerized by introducing a conducting sacrificial substrate under the first PLA nanosheet. Finally, the nanomaterial is consolidated by immobilizing the VDAC36 protein, active as an ion channel, into the nanoperforations of the upper layer. The integration of the protein causes a significant reduction of the material resistance, which decreases from 21.9 to 3.9 kΩ cm2. Electrochemical impedance spectroscopy studies using inorganic ions and molecular metabolites (i.e.l-lysine and ATP) not only reveal that the hybrid films behave as electrochemical supercapacitors but also indicate the most appropriate conditions to obtain selective responses against molecular ions as a function of their charge. The combination of polymers and proteins is promising for the development of new devices for engineering, biotechnological and biomedical applications.

Aquaporin-Containing Proteopolymersomes in Polyelectrolyte Multilayer Membranes

The field of membranes saw huge developments in the last decades with the introduction of both polyelectrolyte multilayer (PEM)-based membranes and biomimetic membranes. In this work, we combine these two promising systems and demonstrate that proteopolymersomes (PP+) with the incorporated aquaporin protein can be distributed in a controlled fashion using PEMs, even on the inner surface of a hollow fiber membrane. In this way, various proteopolymersome multilayers (PPMs) are fabricated using PP+ as the positively charged species in combination with the polyanions poly(styrene 4-sulfonate) (PSS) and poly(acrylic acid) (PAA). It is shown by reflectometry through alternately adsorbing the polyanions and PP+ that, for both PAA and PSS, a good layer growth is possible. However, when the multilayers are imaged by SEM, the PAA-based PPMs show dewetting, whereas vesicular structures can only be clearly observed in and on the PSS-based PPMs. In addition, membrane permeability decreases upon coating the PPMs to 2.6 L∙m⁻²∙h⁻¹∙bar⁻¹ for PAA/PP+ and 7.7 L∙m⁻²∙h⁻¹∙bar⁻¹ for PSS/PP+. Salt retentions show that PAA/PP+ layers are defective (salt retentions <10% and high molecular weight cut-off (MWCO)), in line with the observed dewetting behavior, while PPMs based on PSS show 80% MgSO₄ retention in combination with a low MWCO. The PSS/PP+ membranes show a Donnan-exclusion behavior with moderate MgCl₂ retention (50%–55%) and high Na₂SO₄ retention (85%–90%) indicating a high amount of negative charge present within the PPMs. The corresponding PEMs, on the other hand, are predominately positively charged with MgCl₂ retention of 97%–98% and Na₂SO₄ retention of 57%–80%. This means that the charge inside the multilayer and, thus, its separation behavior can be changed when PP+ is used instead of a polycation. When comparing the PPM membranes to the literature, similar performances are observed with other biomimetic membranes that are not based on interfacial polymerization, but these are the only ones prepared using a desired hollow fiber geometry. Combining PEMs and biomimetic approaches can, thus, lead to relevant membranes, especially adding to the versatility of both systems.

A Review on Reverse Osmosis and Nanofiltration Membranes for Water Purification

Sustainable and affordable supply of clean, safe, and adequate water is one of the most challenging issues facing the world. Membrane separation technology is one of the most cost-effective and widely applied technologies for water purification. Polymeric membranes such as cellulose-based (CA) membranes and thin-film composite (TFC) membranes have dominated the industry since 1980. Although further development of polymeric membranes for better performance is laborious, the research findings and sustained progress in inorganic membrane development have grown fast and solve some remaining problems. In addition to conventional ceramic metal oxide membranes, membranes prepared by graphene oxide (GO), carbon nanotubes (CNTs), and mixed matrix materials (MMMs) have attracted enormous attention due to their desirable properties such as tunable pore structure, excellent chemical, mechanical, and thermal tolerance, good salt rejection and/or high water permeability. This review provides insight into synthesis approaches and structural properties of recent reverse osmosis (RO) and nanofiltration (NF) membranes which are used to retain dissolved species such as heavy metals, electrolytes, and inorganic salts in various aqueous solutions. A specific focus has been placed on introducing and comparing water purification performance of different classes of polymeric and ceramic membranes in related water treatment industries. Furthermore, the development challenges and research opportunities of organic and inorganic membranes are discussed and the further perspectives are analyzed.