Mechanism of Superlubricity Conversion with Polyalkylene Glycol Aqueous Solutions

Macroscale Superlubricity of Black Phosphorus Quantum Dots

In the present work, Black Phosphorus Quantum Dots (BPQDs) were synthesized via sonication-assisted liquid-phase exfoliation. The average size of the BPQDs was 3.3 ± 0.85 nm. The BPQDs exhibited excellent dispersion stability in ultrapure water. Macroscale superlubricity was realized with the unmodified BPQDs on rough Si3N4/SiO2 interfaces. A minimum coefficient of friction (COF) of 0.0022 was achieved at the concentration of 0.015 wt%. In addition, the glycerol was introduced to promote the stability of the superlubricity state. The COF of the BPQDs-Glycerol aqueous solution (BGaq) was 83.75% lower than that of the Glycerol aqueous solution (Gaq). Based on the above analysis, the lubrication model was presented. The hydrogen-bonded network and silica gel layer were formed on the friction interface, which played a major role in the realization of macroscale superlubricity. In addition, the adsorption water layer could also prevent the worn surfaces from making contact with each other. Moreover, the synergistic effect between BPQDs and glycerol could significantly decrease the COF and maintain the superlubricity state. The findings theoretically support the realization of macroscale superlubricity with unmodified BPQDs as a water-based lubrication additive.

Superlubrication obtained with mixtures of hydrated ions and polyethylene glycol solutions in the mixed and hydrodynamic lubrication regimes

HYPOTHESIS

Superlubricity is known to dramatically reduce frictional energy consumption and to improve service life of mechanical devices and biological systems. However, reduction of wear during the running-in period of friction pairs, especially under high contact pressures, still remains an unresolved issue affecting all machines.

EXPERIMENTS

Here the lubrication, adsorption, and conformational properties of hydrated ions and polyethylene glycol (PEG) mixtures were evaluated at different mass fractions and concentrations of PEG and salts by ball-on-disc tribometer, ζ-potential, quartz crystal microbalance with dissipation (QCM-D), and dynamic light scatting (DLS) analyses.

FINDINGS

These mixtures exhibited superlubricity between Si₃N₄ and sapphire surfaces in a wide range of concentrations and ions valency. Interestingly, a running-in phase shorter than 1 min and low wear rate of 1.85 μm³/(N·m) were observed at contact pressures up to 555 MPa, significantly higher to earlier findings. PEG chains retain random coils filling the bulk of the interfacial film without strongly adsorbing on the interfaces but significantly increasing the viscosity of lubricating film, thereby favoring hydrodynamic lubrication. Hydrated ions are strongly adsorbed on the negatively charged ceramic surfaces, ensuring a sustained hydration effect maintaining superlubricity. The outstanding lubrication characteristics of the PEG/ions mixtures were attributed to the synergistic action of hydration and hydrodynamic lubrication, which appears as a promising avenue for developing new green lubricants and has implications for industrial and biological applications.