Helicoidal Patterning of Gold Nanorods by Phase Separation in Mixed Polymer Brushes

Polyelectrolyte Cylindrical Brushes in Hairy Gels

We considered dispersions of cylindrical polyelectrolyte (PE) brushes with stiff backbones, and polymer-decorated nanorods with tunable solubility of the brush-forming PE chains that affected thermodynamic stability of the dispersions. We focused on thermo-induced and deionization-induced conformational transition that provokes loss of aggregative dispersion stability of nanorods decorated with weakly ionized polyions. A comparison between theoretical predictions and experiments enabled rationalization and semi-quantitative interpretation of the experimental results.

Patterning of Polymer-Functionalized Nanoparticles with Varied Surface Mobilities of Polymers

The polymers can be either dynamically tethered to or permanently grafted to the nanoparticle to produce polymer-functionalized nanoparticles. The surface mobility of polymer ligands with one end anchored to the nanoparticle can affect the surface pattern, but the effect remains unclear. Here, we addressed the influence of lateral polymer mobility on surface patterns by performing self-consistent field theory calculations on a modeled polymer-functionalized nanoparticle consisting of immobile and mobile brushes. The results show that except for the radius of nanoparticles and grafting density, the fraction of mobile brushes substantially influences the surface patterning of polymer-functionalized nanoparticles, including striped patterns and patchy patterns with various patches. The number of patches on a nanoparticle increases as the fraction of mobile brushes decreases, favored by the entropy of immobile brushes. Critically, we found that broken symmetry usually occurs in patchy nanoparticles, associated with the balance of enthalpic and entropic effects. The present work provides a fundamental understanding of the dependence of surface patterning on lateral polymer mobility. The work could also guide the preparation of diversified nanopatterns, especially for the asymmetric patchy nanoparticles, enabling the fundamental investigation of the interaction between polymer-functionalized nanoparticles.

Phase separation in polymer-based biomimetic structures containing planar membranes

Phase separation in biological membranes is crucial for proper cellular functions, such as signaling and trafficking, as it mediates the interactions of condensates on membrane-bound organelles and transmembrane transport to targeted destination compartments. The separation of a lipid bilayer into phases and the formation of lipid rafts involve the restructuring of molecular localization, their immobilization, and local accumulation. By understanding the processes underlying the formation of lipid rafts in a cellular membrane, it is possible to reconstitute this phenomenon in synthetic biomimetic membranes, such as hybrids of lipids and polymers or membranes composed solely of polymers, which offer an increased physicochemical stability and unlimited possibilities of chemical modification and functionalization. In this article, we relate the main lipid bilayer phase transition phenomenon with respect to hybrid biomimetic membranes, composed of lipids mixed with polymers, and fully synthetic membranes. Following, we review the occurrence of phase separation in biomimetic hybrid membranes based on lipids and/or direct lipid analogs, amphiphilic block copolymers. We further exemplify the phase separation and the resulting properties and applications in planar membranes, free-standing and solid-supported. We briefly list methods leading to the formation of such biomimetic membranes and reflect on their improved overall stability and influence on the separation into different phases within the membranes. Due to the importance of phase separation and compartmentalization in cellular membranes, we are convinced that this compiled overview of this phenomenon will be helpful for any researcher in the biomimicry area.

Synthesis of Patchy Nanoparticles with Symmetry Resembling Polar Small Molecules

Patchy nanoparticles (NPs) show many important applications, especially for constructing structurally complex colloidal materials, but existing synthetic strategies generate patchy NPs with limited types of symmetry. This article describes a versatile copolymer ligand-based strategy for the scalable synthesis of uniform Au-(SiO₂ )_x patchy NPs (x is the patch number and 1 ≤ x ≤ 5) with unusual symmetry at high yield. The hydrolysis and condensation of tetraethyl orthosilicate on block-random copolymer ligands induces the segregation of copolymers on gold NPs (AuNPs) and hence governs the structure and distribution of silica patches formed on the AuNPs. The resulting patchy NPs possess unique configurations where the silica patches are symmetrically arranged at one side of the core NP, resembling the geometry of polar small molecules. The number, size, and morphology of silica patches, as well as the spacing between the patches and the AuNP can be precisely tuned by tailoring copolymer architectures, grafting density of copolymers, and the size of AuNPs. Furthermore, it is demonstrated that the Au-(SiO₂ )_x patchy NPs can assemble into more complex superstructures through directional interaction between the exposed Au surfaces. This work offers new opportunities of designing next-generation complex patchy NPs for applications in such as biomedicines, self-assembly, and catalysis.

Site-selective modification of metallic nanoparticles

Surface patterning of inorganic nanoparticles through site-selective functionalization with mixed-ligand shells or additional inorganic material is an intriguing approach to developing tailored nanomaterials with potentially novel and/or multifunctional properties. The unique physicochemical properties of such nanoparticles are likely to impact their behavior and functionality in biological environments, catalytic systems, and electronics applications, making it vital to understand how we can achieve and characterize such regioselective surface functionalization. This Feature Article will review methods by which chemists have selectively modified the surface of colloidal nanoparticles to obtain both two-sided Janus particles and nanoparticles with patchy or stripey mixed-ligand shells, as well as to achieve directed growth of mesoporous oxide materials and metals onto existing nanoparticle templates in a spatially and compositionally controlled manner. The advantages and drawbacks of various techniques used to characterize the regiospecificity of anisotropic surface coatings are discussed, as well as areas for improvement, and future directions for this field.

Polymer-Tethered Nanoparticles: From Surface Engineering to Directional Self-Assembly

ConspectusCurrent interest in nanoparticle ensembles is motivated by their collective synergetic properties that are distinct from or better than those of individual nanoparticles and their bulk counterparts. These new advanced optical, electronic, magnetic, and catalytic properties can find applications in advanced nanomaterials and functional devices, if control is achieved over nanoparticle organization. Self-assembly offers a cost-efficient approach to produce ensembles of nanoparticles with well-defined and predictable structures. Nanoparticles functionalized with polymer molecules are promising building blocks for self-assembled nanostructures, due to the comparable dimensions of macromolecules and nanoparticles, the ability to synthesize polymers with various compositions, degrees of polymerization, and structures, and the ability of polymers to self-assemble in their own right. Moreover, polymer ligands can endow additional functionalities to nanoparticle assemblies, thus broadening the range of their applications.In this Account, we describe recent progress of our research groups in the development of new strategies for the self-assembly of nanoparticles tethered to macromolecules. At the beginning of our journey, we developed a new approach to patchy nanoparticles and their self-assembly. In a thermodynamically driven strategy, we used poor solvency conditions to induce homopolymer surface segregation in pinned micelles (patches). Patchy nanoparticles underwent self-assembly in a well-defined and controlled manner. Following this work, we overcame the limitation of low yield of the generation of patchy nanoparticles, by using block copolymer ligands. For block copolymer-capped nanoparticles, patch formation and self-assembly were "staged" by using distinct stimuli for each process. We expanded this work to the generation of patchy nanoparticles via dynamic exchange of block copolymer molecules between the nanoparticle surface and micelles in the solution. The scope of our work was further extended to a series of strategies that utilized the change in the configuration of block copolymer ligands during nanoparticle interactions. To this end, we explored the amphiphilicity of block copolymer-tethered nanoparticles and complementary interactions between reactive block copolymer ligands. Both approaches enabled exquisite control over directional and self-limiting self-assembly of complex hierarchical nanostructures. Next, we focused on the self-assembly of chiral nanostructures. To enable this goal, we attached chiral molecules to the surface of nanoparticles and organized these hybrid building blocks in ensembles with excellent chiroptical properties. In summary, our work enables surface engineering of polymer-capped nanoparticles and their controllable and predictable self-assembly. Future research in the field of nanoparticle self-assembly will include the development of effective characterization techniques, the synthesis of new functional polymers, and the development of environmentally responsive self-assembly of polymer-capped nanoparticles for the fabrication of nanomaterials with tailored functionalities.

Bottom-up nanoscale patterning and selective deposition on silicon nanowires

We demonstrate a bottom-up process for programming the deposition of coaxial thin films aligned to the underlying dopant profile of semiconductor nanowires. Our process synergistically combines three distinct methods-vapor-liquid-solid nanowire growth, selective coaxial lithography via etching of surfaces (SCALES), and area-selective atomic layer deposition (AS-ALD)-into a cohesive whole. Here, we study ZrO₂on Si nanowires as a model system. Si nanowires are first grown with an axially modulated n-Si/i-Si dopant profile. SCALES then yields coaxial poly(methyl methacrylate) (PMMA) masks on the n-Si regions. Subsequent AS-ALD of ZrO₂occurs on the exposed i-Si regions and not on those masked by PMMA. We show the spatial relationship between nanowire dopant profile, PMMA masks, and ZrO₂films, confirming the programmability of the process. The nanoscale resolution of our process coupled with the plethora of available AS-ALD chemistries promises a range of future opportunities to generate structurally complex nanoscale materials and electronic devices using entirely bottom-up methods.

Gold Nanorods: The Most Versatile Plasmonic Nanoparticles

Gold nanorods (NRs), pseudo-one-dimensional rod-shaped nanoparticles (NPs), have become one of the burgeoning materials in the recent years due to their anisotropic shape and adjustable plasmonic properties. With the continuous improvement in synthetic methods, a variety of materials have been attached around Au NRs to achieve unexpected or improved plasmonic properties and explore state-of-the-art technologies. In this review, we comprehensively summarize the latest progress on Au NRs, the most versatile anisotropic plasmonic NPs. We present a representative overview of the advances in the synthetic strategies and outline an extensive catalogue of Au-NR-based heterostructures with tailored architectures and special functionalities. The bottom-up assembly of Au NRs into preprogrammed metastructures is then discussed, as well as the design principles. We also provide a systematic elucidation of the different plasmonic properties associated with the Au-NR-based structures, followed by a discussion of the promising applications of Au NRs in various fields. We finally discuss the future research directions and challenges of Au NRs.

Adaptable Multivalent Hairy Inorganic Nanoparticles

We report a polymer brush-based approach for fabricating multivalent patchy nanoparticles (NPs) with the number of nanodomains (valency) from 6 to 10, potentially from 1 to 10, by exploiting the lateral microphase separation of binary mixed homopolymer brushes grafted on NPs with a radius comparable to the polymer sizes. Well-defined mixed brushes were grown on 20.4 nm silica NPs by two-step surface-initiated reversible deactivation radical polymerizations and microphase separated laterally upon casting from a good solvent, producing multivalent NPs on 2D surfaces. A linear relationship between valency and average core size for the corresponding valency was observed. The mixed brush NPs exhibited abilities to form "bonds" through the overlap of nanodomains and to change the valency when interacting with adjacent NPs. This method could open up a new avenue for studying patchy NPs.

Tracking the Effects of Ligands on Oxidative Etching of Gold Nanorods in Graphene Liquid Cell Electron Microscopy

Surface ligands impact the properties and chemistry of nanocrystals, but observing ligand binding locations and their effect on nanocrystal shape transformations is challenging. Using graphene liquid cell electron microscopy and the controllable, oxidative etching of gold nanocrystals, the effect of different ligands on nanocrystal etching can be tracked with nanometer spatial resolution. The chemical environment of liquids irradiated with high-energy electrons is complex and potentially harsh, yet it is possible to observe clear evidence for differential binding properties of specific ligands to the nanorods' surface. Exchanging CTAB ligands for PEG-alkanethiol ligands causes the nanorods to etch at a different, constant rate while still maintaining their aspect ratio. Adding cysteine ligands that bind preferentially to nanorod tips induces etching predominantly on the sides of the rods. This etching at the sides leads to Rayleigh instabilities and eventually breaks apart the nanorod into two separate nanoparticles. The shape transformation is controlled by the interplay between atom removal and diffusion of surface atoms and ligands. These in situ observations are confirmed with ex situ colloidal etching reactions of gold nanorods in solution. The ability to monitor the effect of ligands on nanocrystal shape transformations will enable future in situ studies of nanocrystals surfaces and ligand binding positions.

Morphological Transitions in Patchy Nanoparticles

Nanoparticles (NPs) decorated with topographically or chemically distinct surface patches are an emerging class of colloidal building blocks of functional hierarchical materials. Surface segregation of polymer ligands into pinned micelles offers a strategy for the generation of patchy NPs with controlled spatial distribution and number of patches. The thermodynamic nature of this approach poses a question about the stability of multiple patches on the NP surface, as the lowest energy state is expected for NPs carrying a single patch. In the present work, for gold NPs end-grafted with thiol-terminated polymer molecules, we show that the patchy surface morphology is preserved under conditions of strong grafting of the thiol groups to the NP surface (i.e., up to a temperature of 40 °C), although the patch shape changes over time. At higher temperatures (e.g., at 80 °C), the number of patches per NP decreases, due to the increased lateral mobility and coalescence of the patches as well as the ultimate loss of the polymer ligands due to desorption at enhanced solvent quality. The experimental results were rationalized theoretically, using a scaling approach. The results of this work offer insight into the surface science of patchy nanocolloids and specify the time and temperature ranges of the applications of patchy NPs.