Adsorption of Fluoroquinolone Antibiotics at the Gas-Liquid Interface Using Ionic Surfactants

Ciprofloxacin and Azithromycin Antibiotics Interactions with Bilayer Ionic Surfactants: A Molecular Dynamics Study

The introduction of pharmaceuticals into aquatic ecosystems can lead to the generation of antibiotic-resistant bacteria. This paper employed molecular dynamics simulations to examine the interactions between cationic/anionic surfactants and two antibiotics or drugs, namely, ciprofloxacin and azithromycin. The analysis focused on many factors to elucidate the mechanism by which the surfactant bilayer molecular structure affects the selected antibiotics. These factors include the tilt angle, rotational angle of the surfactants, electrostatic potential, and charge density along the bilayers. Our molecular-level investigation of the adsorption mechanisms of hydrophobic (azithromycin) and hydrophilic (ciprofloxacin) drugs on the cationic/anionic surfactant bilayer offers a crucial understanding for comprehending the optimal selection of surfactants for effectively separating antibiotics.

Effects of surfactants on the adsorption of norfloxacin onto ferrihydrite: comparison between anionic and cationic surfactants

There is little information on how widespread surfactants affect the adsorption of norfloxacin (NOR) onto iron oxide minerals. In order to elucidate the effects of various surfactants on the adsorption characteristics of NOR onto typical iron oxides, we have explored the different influences of sodium dodecylbenzene sulfonate (SDBS), an anionic surfactant, and didodecyldimethylammonium bromide (DDAB), a cationic surfactant, on the interactions between NOR and ferrihydrite under different solution chemistry conditions. Interestingly, SDBS facilitated NOR adsorption, whereas DDAB inhibited NOR adsorption. The adsorption-enhancement effect of SDBS was ascribed to the enhanced electrostatic attraction, the interactions between the adsorbed SDBS on ferrihydrite surfaces and NOR molecules, and the bridging effect of SDBS between NOR and iron oxide. In comparison, the adsorption-inhibition effect of DDAB owning to the adsorption site competitive adsorption between NOR and DDAB for the effective sites as well as the steric hindrance between NOR-DDAB complexes and the adsorbed DDAB on ferrihydrite surfaces. Additionally, the magnitude of the effects of surfactants on NOR adsorption declined with increasing pH values from 5.0 to 9.0, which was related to the amounts of surfactant binding to ferrihydrite surfaces. Moreover, when the background electrolyte was Ca2+, the enhanced effect of SDBS on NOR adsorption was caused by the formation of NOR-Ca2+-SDBS complexes. The inhibitory effect of DDAB was due to the DDAB coating on ferrihydrite, which undermined the cation-bridging effect. Together, the findings from this work emphasize the essential roles of widely existing surfactants in controlling the environmental fate of quinolone antibiotics.

Influence of surfactant molecular features on tetracycline transport in saturated porous media of varied surface heterogeneities

This study aims to understand how surfactants affect the mobility of tetracycline (TC), an antibiotic, through different aquifer media. Two anionic and cationic surfactants, sodium dodecylbenzene sulfonate (SDBS) and cetyltrimethyl ammonium bromide (CTAB), were used to study their influence on TC mobility through clean sand and humic acid (HA)-coated sand. HA coating inhibits TC mobility due to its strong interaction with TC. Both surfactants promoted TC mobility at pH 7.0 due to competitive deposition, steric effect, and increased hydrophilicity of TC. CTAB had a more substantial effect than SDBS, related to the surfactants' molecular properties. Each surfactant's promotion effects were greater in HA-coated sand than in quartz sand due to differences in surfactant retention. CTAB inhibited TC transport at pH 9.0 due to its significant hydrophobicity effect. Furthermore, in the presence of Ca2+, SDBS enhanced TC transport by forming deposited SDBS-Ca2+-TC complexes. On the other hand, CTAB increased TC mobility due to its inhibition of cation bridging between TC and porous media. The findings highlight surfactants' crucial role in influencing the environmental behaviors of tetracycline antibiotics in varied aquifers.

Rational Design and Synthesis of Fe-Doped Co-Based Coordination Polymer Composite Photocatalysts for the Degradation of Norfloxacin and Ciprofloxacin

The solar light-responsive Fe-doped Co-based coordination polymer (Fe@Co-CP) photocatalyst was synthesized under mild conditions. [Co(4-padpe)(1,3-BDC)]n (Co-CP) was first constructed using mixed ligands through the hydrothermal method. Then, Fe was introduced into the Co-CP framework to achieve the enhanced photocatalytic activity. The optimal Fe@Co-CP-2 exhibited excellent catalytic degradation performance for norfloxacin and ciprofloxacin under sunlight irradiation without auxiliary oxidants, and the degradation rates were 91.25 and 92.66% in 120 min. These excellent photocatalytic properties were ascribed to the generation of the Fe-O bond, which not only enhanced the light absorption intensity but also accelerated the separation efficiency of electrons and holes, and hence significantly improved the photocatalytic property of the composites. Meanwhile, Fe@Co-CP-2 displayed excellent stability and reusability. In addition, the degradation pathways and intermediates of antibiotic molecules were effectively analyzed. The free radical scavenging experiment and ESR results confirmed that •OH, •O2-, and h+ active species were involved in the catalytic degradation reaction; the corresponding mechanisms were deeply investigated. This study provides a fresh approach for constructing Fe-doped Co-CP-based composite materials as photocatalysts for degradation of antibiotic contaminants.

Binding Study of Antibacterial Drug Ciprofloxacin with Imidazolium-Based Ionic Liquids Having Different Halide Anions: A Spectroscopic and Density Functional Theory Analysis

Herein, we have shown the interaction of an antibiotic drug ciprofloxacin (CIP) with three surface-active ionic liquids (ILs), having the same cation and different anions, namely, 1-decyl-3-methylimidazoliumtetrafluoroborate [C10mim][BF4], 1-decyl-3-methylimidazolium bromide [C10mim][Br], and 1-decyl-3-methylimidazolium chloride [C10mim][Cl]. This study has been performed by exploiting various spectroscopic techniques such as steady-state fluorescence, time-resolved fluorescence, and UV-visible spectroscopy. The fluorescence emission study of CIP with ILs was performed at various concentrations of all the three ILs. The emission spectra of CIP decreased in the presence of ILs, suggesting complex formation between CIP-IL. The effect of different concentrations of ILs on the emission spectra of CIP was exploited in terms of quenching and binding parameters. Further, fluorescence emission study was validated by the time-resolved fluorescence technique by measuring the average lifetime (τavg) of CIP in the presence of all the three ILs. The τavg value of the drug changed with the addition of ILs, which suggests complex formation between the drug and ILs. This complex formation was also confirmed by UV-visible spectroscopy results of CIP with all the three ILs. Further, for evaluating the thermodynamic parameters of the CIP-IL interactions, isothermal titration calorimetry (ITC) was performed. The ITC experiment yielded the thermodynamic parameters, ΔH (change in the enthalpy of association), ΔG (Gibbs free energy change), ΔS (entropy change), and binding constant (Ka). The binding parameters driven by ITC revealed that CIP-IL interactions are spontaneous in nature and enthalpy-driven, involving hydrophobic forces. Further, the classical density functional theory (DFT) calculations were performed, which provided deep insight for CIP-IL complex formation.

Adsorption of fluoroquinolone antibiotics onto ferrihydrite under different anionic surfactants and solution pH

To date, little information is available regarding the impacts of the widespread anionic surfactants on the adsorption behaviors of antibiotics onto typical iron oxides. Herein, we have investigated the effects of two typical surfactants (sodium dodecyl sulfate (SDS) and sodium dodecylbenzene sulfonate (SDBS)) on the adsorption of two widely used antibiotics (i.e., levofloxacin (LEV) and ciprofloxacin (CIP)) onto ferrihydrite. Results of kinetic experiments showed that the adsorption of antibiotics was well fitted by the pseudo-second-order kinetic models, indicating that the adsorption process might be controlled by chemisorption. The affinity of ferrihydrite toward CIP was greater than that toward LEV, which was ascribed to the higher hydrophobicity of CIP than LEV. Both surfactants enhanced antibiotic adsorption owing to SDS or SDBS molecules as bridge agents between ferrihydrite particles and antibiotics. Interestingly, the extent of the enhanced effects of surfactants on antibiotic adsorption declined as the background solution pH increased from 5.0 to 9.0, which was mainly due to the weaker hydrophobic interactions between antibiotics and the adsorbed surfactants on the iron oxide surfaces as well as the greater electrostatic repulsion between the anionic species of antibiotics and the negatively charged ferrihydrite particles at higher pH. Together, these findings emphasize the importance of widespread surfactants for illustrating the interactions between fluoroquinolone antibiotics and iron oxide minerals in the natural environment.

Surfactants-mediated the enhanced mobility of tetracycline in saturated porous media and its variation with aqueous chemistry

Knowledge of the mobility of tetracycline (TC) antibiotics in porous media is critical to understand their potential environmental influences. The transport characteristics of TC in sand columns with three different surfactants, including Tween 80, sodium dodecylbenzene sulfonate (SDBS), and didodecyldimethylammonium bromide (DDAB) under various conditions were investigated in this study. Results demonstrated that all surfactants enhanced TC transport under neutral conditions (10 mM NaCl at pH 7.0). The observation was attributed mostly to deposition site competition, higher electrostatic repulsion between TC molecules and sand grains, steric hindrance, and the increase of TC hydrophilicity. Furthermore, the order of the transport-enhancement effects was generally observed as follows: DDAB > SDBS > Tween 80. The trend was controlled by the variation in the physicochemical properties of surfactants. It was noticed that the presence of Cu²⁺ (a model divalent cation) in the background solution, the cation-bridging contributed to the promotion effects of DDAB or Tween 80 on TC mobility. Interestingly, SDBS considerably suppressed TC transport due to the precipitation of SDBS-Cu²⁺ complexes onto sand surfaces. Moreover, the enhancement order of surfactants at pH 5.0 was similar to that pH 7.0. However, DDAB could inhibit TC transport in sand columns at pH 9.0, which were mainly caused by the decrease of electrostatic repulsion and the hydrophobicity induced by the binding cationic surfactant. Findings from this work provide novel insight into involvement of surfactants in antibiotic transport behaviors in the subsurface environment.

Critical review on adsorptive removal of antibiotics: Present situation, challenges and future perspective

This review gives a proper dedicated understanding of the contamination level, sources, and biological dangers related with different classes of antibiotics in consumable water. The literature on the adsorption of antibiotics is relatively uncommon and developments are still under progression, especially for adsorbents other than activated carbon. Also, adsorption technique has already been applied vastly for water treatment. Notwithstanding significant progressions, designed natural wastewater treatment frameworks are just bearably effective (48-77%) in the expulsion of antibiotics. Hence, the compilation of available literature especially for antibiotic adsorption was much needed. Moreover, the conventional adsorbents have some limitations of their own. In this study, the main focus was laid on unconventional adsorbents such as Biochar, Biopolymers, Carbon Nanotubes, Clays, Metal-Organic Frameworks, Microalgae and some miscellaneous adsorbents. The mechanism of adsorption by the unconventional adsorbents includes electrostatic interactions, π-π bonding, weak Van der Waal forces, H-bonding and surface complexation, which was similar to that of conventional adsorbents and hence these unconventional adsorbents can easily replace the costlier conventional adsorbents with even better adsorption efficiency. This paper also briefly discussed the thermodynamics, adsorption equilibrium; isotherm and kinetics of adsorption. This review paper seizes the critical advances of adsorption phenomenon at various interfaces and lays the foundation for current scenario associated with further progress. Besides, this study would help in understanding the antibiotic adsorption, cost estimation and future goals that will attract the young the researchers of this field.

Rapid degradation of norfloxacin by VUV/Fe2+/H2O2 over a wide initial pH: Process parameters, synergistic mechanism, and influencing factors

Vacuum UV (VUV) technology has attracted much attention because it effectively splits water to generate reactive oxygen species (ROS) in situ and has the advantages of UV. So far, the synergistic mechanisms, formation pathways and contributions of ROS in VUV/Fe²⁺/H₂O₂ process have not been extensively studied. Herein, complete removal (at 4 min) and 63.3% mineralization (at 8 min) of 45 μM norfloxacin (NOR) were achieved at neutral pH by VUV/Fe²⁺/H₂O₂ (90 μM Fe²⁺ and 3 mM H₂O₂). Compared with its subsystems, VUV/Fe²⁺/H₂O₂ can not only increase the pseudo-first-order reaction rate constant of NOR removal by 2.3-14.9 times and increase the mineralization by 20.4-59.4%, but also reduce the residual ratio of H₂O₂ by 19.9-70.1% and reduce total cost by 20.0-68.0%. The synergy factor of VUV/Fe²⁺/H₂O₂ was 3.97, which was attributed to the VUV irradiation promoting iron redox cycle and H₂O₂ decomposition. Moreover, hydroxyl radical and superoxide radical, which were identified as the main ROS, contributed 79.07% and 18.47% to NOR removal, respectively. Degradation pathways of NOR were proposed. Furthermore, effects of coexisting ions and dissolved organic matter were investigated. As an energy-saving and efficient process, the satisfactory results of VUV/Fe²⁺/H₂O₂ applied in real waters also highlight its application potential.

Sensitive and selective determination of triclosan using visual spectroscopy

Triclosan is a commonly used biocide effective against bacterial and fungal infections. However, its overuse in pharmaceutical and personal care products has resulted in its abundance in the natural environment. The detection of triclosan by visual spectroscopy can be carried out using the azo-coupling reaction of diazonium complexes. However, the reaction is also common to other phenolic compounds and aromatic amines, posing significant challenge. In this work, we investigate the azo-coupling reaction of triclosan and several commonly occurring analogous compounds to develop an improved spectroscopic method for the selective determination of triclosan without interference. We find that the azo-coupling reaction between the diazotized derivative and the phenolic compounds is highly dependent on the pH of the reaction media. At pH 7.2, the absorbance of the azo dye product of triclosan shows a peak at 452 nm which has minimal interference from other phenolic azo-dye products with the exception of naphthol. Naphthol shows an interference corresponding to 58% of the analytical signal of equimolar triclosan concentration. To overcome this, we develop an analytical model for the simultaneous determination of triclosan and naphthol from mixed solutions of the compounds. A linear calibration plot from 1.7 to 34 µM was obtained for both triclosan and naphthol with limit-of-detection (LOD) of 0.62 µM and 1.03 µM respectively. The developed protocol was tested for the analysis of water samples collected from various environmental sources spiked with different concentrations of triclosan and naphthol. The samples were enriched by solid-phase-extraction which allowed a 50-fold enhancement in detection of triclosan. The average relative recovery of triclosan in real samples was found to be 98.6% .