Probing Surface Hydration and Molecular Structure of Zwitterionic and Polyacrylamide Hydrogels

Precise Lubrication and Protection of Cartilage Damage by Targeting Hydrogel Microsphere

Osteoarthritis (OA) is a degenerative bone and joint disease characterized by decreased cartilage lubrication, leading to continuous wear and ultimately irreversible damage. This situation is particularly challenging for early-stage OA, as current bio-lubricants lack precise targeting for small inflammatory lesions. In this work, an antibody-mediated targeting hydrogel microspheres (HMS) is developed to precisely lubricate the local injury site of cartilage and prevent the progression of early OA. Anti-Collagen type I (Anti-Col1) is an antibody that targets cartilage injury sites in early OA stages. It is anchored on a HMS matrix made of Gelatin methacrylate (GelMA) and poly (sulfobetaine methacrylate) (PSBMA) to create targeted HMS (T-G/S HMS). The T-G/S HMS's high hydrophilicity, along with the dynamic interaction between its surficial Anti-Col1 and the Col1 on cartilage injury site, ensures its precise and effective lubrication of early OA lesions. Consequently, injecting T-G/S HMS into rats with early OA significantly slows disease progression and reduces symptoms. In conclusion, the developed injectable targeted lubricating HMS and the precisely targeted lubrication strategy represent a promising, convenient technique for treating OA, particularly for slowing the early-stage OA progression.

Salt-Screened Transition toward Bulk-Like Water Dynamics near Polymeric Zwitterions

The superior antifouling performance of zwitterionic materials is commonly linked to their hydration structure, in which tight surface binding of water molecules inhibits solute adsorption. However, there is comparatively little direct experimental data on the hydration water structure and dynamics around zwitterionic moieties, including the longer-range behavior of the hydration shell that modulates the approach of solutes to the polymer surface. This work experimentally probes the dynamics of the diffusing hydration water molecules around a series of zwitterion chemistries using Overhauser dynamic nuclear polarization relaxometry. Surprisingly, water dynamics measured within ∼1 nm of the zwitterions were minimally inhibited compared to those near uncharged hydrophilic or cationic side chains. Specific dissolved ions further enhance the water diffusivity near the zwitterions, rendering the hydration shell bulk water-like. These results that the hydration of a zwitterion surface is nearly indistinguishable from bulk water suggest that these surfaces are "invisible" to biological constituents in a manner tunable by the ionic environment and the chemical design of the zwitterionic surface.

Ultrathin Water-Responsive Zwitterionic Hydrogel Brush Coatings for Long-Term Corrosion Protection

Preventing metal corrosion has usually been associated with water-repellent coatings that inhibit the penetration of aggressive chloride ions. Contrary to this conventional wisdom, we engineered ultrathin superhydrophilic zwitterionic hydrogel brushes rooted in a nanoporous anodic aluminum oxide (AAO) substrate that effectively hampered the adsorption of hydrated chloride ions (Cl-·H2O) on the Al alloy surface. The hydrogel brush coating enhanced corrosion resistance by 3 orders of magnitude, with corrosion current density declining from 1.518 to 1.567 × 10-3 μA cm-2. Despite suffering from long-term salt-spaying tests, zwitterionic hydrogel brush coating retained 2 orders of magnitude of corrosion resistance. Direct Raman spectroscopic evidence manifested that interfacial water comprised both highly ordered hydrogen-bonded water and disordered water containing hydrated Cl- ions. Under the hydration effect of zwitterionic hydrogel brushes, an interfacial disordered water structure dynamically transformed into a hydrogen-bonded water film. We correlated the structure and quantities of interfacial water with the corrosion current density and chloride adsorption. Hydrogen-bonded water improved by zwitterionic hydrogel brushes weakened the affinity and adsorption of hydrated Cl- ion water on the oxide film, resulting in excellent corrosion protection. Therefore, employing localized hydration tuning strategies, these findings are anticipated to generally empower ordered interfacial water to enhance metal corrosion resistance through precise interfacial engineering.

Advances in Bioresorbable Triboelectric Nanogenerators

With the growing demand for next-generation health care, the integration of electronic components into implantable medical devices (IMDs) has become a vital factor in achieving sophisticated healthcare functionalities such as electrophysiological monitoring and electroceuticals worldwide. However, these devices confront technological challenges concerning a noninvasive power supply and biosafe device removal. Addressing these challenges is crucial to ensure continuous operation and patient comfort and minimize the physical and economic burden on the patient and the healthcare system. This Review highlights the promising capabilities of bioresorbable triboelectric nanogenerators (B-TENGs) as temporary self-clearing power sources and self-powered IMDs. First, we present an overview of and progress in bioresorbable triboelectric energy harvesting devices, focusing on their working principles, materials development, and biodegradation mechanisms. Next, we examine the current state of on-demand transient implants and their biomedical applications. Finally, we address the current challenges and future perspectives of B-TENGs, aimed at expanding their technological scope and developing innovative solutions. This Review discusses advancements in materials science, chemistry, and microfabrication that can advance the scope of energy solutions available for IMDs. These innovations can potentially change the current health paradigm, contribute to enhanced longevity, and reshape the healthcare landscape soon.

Chemical antifouling strategies in sensors for food analysis: A review

Surface biofouling induced by the undesired nonspecific adsorption of foulants (e.g., coexisting proteins and cells) in food matrices is a major issue of sensors for food analysis, hindering their reliability and accuracy of sensing. This issue can be addressed by developing antifouling strategies to prevent or alleviate nonspecific binding. Chemical antifouling strategies involve the use of chemical modifiers (i.e., antifouling materials) to strongly hydrate the surface and reduce surface biofouling. Through appropriate immobilization approaches, antifouling materials can be tethered onto sensors to form antifouling surfaces with well-ordered structures, balanced surface charges, and appropriate surface density and thickness. A rational antifouling surface can reduce the matrix effect, simplify sample pretreatment, and improve analytical performance. This review summarizes recent developments in chemical antifouling strategies in sensing. Surface antifouling mechanisms and common antifouling materials are described, and factors that may influence the antifouling effects of antifouling surfaces and approaches incorporating antifouling materials onto sensing surfaces are highlighted. Moreover, the specific applications of antifouling sensors in food analysis are introduced. Finally, we provide an outlook on future developments in antifouling sensors for food analysis.

Chemically revised conducting polymers with inflammation resistance for intimate bioelectronic electrocoupling

Conducting polymers offer attractive mixed ionic-electronic conductivity, tunable interfacial barrier with metal, tissue matchable softness, and versatile chemical functionalization, making them robust to bridge the gap between brain tissue and electronic circuits. This review focuses on chemically revised conducting polymers, combined with their superior and controllable electrochemical performance, to fabricate long-term bioelectronic implants, addressing chronic immune responses, weak neuron attraction, and long-term electrocommunication instability challenges. Moreover, the promising progress of zwitterionic conducting polymers in bioelectronic implants (≥4 weeks stable implantation) is highlighted, followed by a comment on their current evolution toward selective neural coupling and reimplantable function. Finally, a critical forward look at the future of zwitterionic conducting polymers for in vivo bioelectronic devices is provided.

Immobilization of horseradish peroxidase with zwitterionic polymer material for industrial phenolic removal

Horseradish peroxidase (HRP) is a hemoglobin composed of a single peptide chain that catalyzes the oxidation of various substrates such as phenol and aniline in the presence of hydrogen peroxide via its iron-porphyrin catalytic center. This enzyme is widely used in industrial phenol removal, food additives, biomedicine, and clinical test reagents due to its rapid reaction rate and obvious reaction outcomes. However, the large-scale use of HRP in industrial applications still faces numerous challenges, including activity, stability, and sustainability. This study demonstrates that when peroxidase is immobilized in zwitterionic polymer hydrogels, polycarboxybetaine (PCB) and polysulfobetaine (PSB), the properties of the enzyme are improved. PCB and PSB-embedded HRP exhibit a 6.11 and 1.53 times increase in Kcat/Km value, respectively, compared to the free enzyme. The immobilized enzyme also experiences increased activity over a range of temperatures and better tolerance to extreme pH and organic solvents, including formaldehyde. In addition, immobilized HRP exhibits excellent performance in storage and reproducibility. Remarkably, PCB-HRP still retains 80% of the initial activity after a 6-week storage period and can still attain the initial catalytic level of the free enzyme after six repeated cycles. It also removes 90% of phenol within 12 min, surpassing the current pharmacy on the market. These experimental results indicated that we have successfully designed a set of stable and efficient support substrates for horseradish peroxidase, which enhances its suitability for deployment in industrial applications.

Evidence for a Local Field Effect in Surface Plasmon-Enhanced Sum Frequency Generation Vibrational Spectra

Surface plasmon-enhanced vibrational spectroscopy has been demonstrated to be an important highly sensitive diagnostic technique, but its enhanced mechanism is yet to be explored. In this study, we couple femtosecond sum frequency generation vibrational spectroscopy (SFG-VS) with surface plasmon generated by the excitation of localized gold nanorods/nanoparticles and investigate the plasmonically enhanced factors (EFs) of SFG signals from poly(methyl methacrylate) films. Through monitoring the SFG intensity of carbonyl and ester methyl groups, we have established a correlation between EFs and the coupling of localized surface plasmon resonance with SFG and visible beams. It is found that the total enhanced factor is approximately proportional to the square of an enhanced factor of the SFG electromagnetic field and the fourth power of the enhanced factor of the visible electromagnetic field. The local field effect is roughly expressed to be the square of an enhanced factor of the visible electromagnetic field. This finding will help to guide the experimental design of plasmon-enhanced SFG to drastically improve the detection sensitivity and thus provide greater insight into the ultrafast dynamics near plasmonic surfaces.

Surface Hydration and Antifouling Activity of Zwitterionic Polymers

It is believed that the strong surface hydration of zwitterionic polymers leads to excellent antifouling properties. This Perspective presents the recent developments in studies on such surface hydration in situ using sum frequency generation (SFG) vibrational spectroscopy. SFG research provides direct molecular level evidence that zwitterionic polymers have strong surface hydration, which prevents protein adsorption and marine animal attachment. The salt effect and protein interaction on surface hydration of zwitterionic polymers have also been examined using SFG. Possible future research directions on surface hydration of new zwitterionic polymers including zwitterionic hydrogels, copolymers, and mixed charged polymers are discussed. It is also important to combine experimental SFG studies with computer simulations to further elucidate the surface hydration to understand antifouling mechanisms.

Probing Covalent Interactions at a Silicone Adhesive/Nylon Interface

Covalent bonding is one of the most robust forms of intramolecular interaction between adhesives and substrates. In contrast to most noncovalent interactions, covalent bonds can significantly enhance both the interfacial strength and durability. To utilize the advantages of covalent bonding, specific chemical reactions are designed to occur at interfaces. However, interfacial reactions are difficult to probe in situ, particularly at the buried interfaces found in well-bonded adhesive joints. In this work, sum frequency generational (SFG) vibrational spectroscopy was used to directly examine and analyze the interfacial chemical reactions and related molecular changes at buried nylon/silicone elastomer interfaces. For self-priming elastomeric silicone adhesives, silane coupling agents have been extensively used as adhesion promoters. Here with SFG, the interfacial chemical reactions between nylon and two alkoxysilane adhesion promoters with varied functionalities (maleic anhydride (MAH) and epoxy) formulated into the silicone were observed and investigated. Evidence of reactions between the organofunctional group of each silane and reactive groups on the polyamide was found at the buried interface between the cured silicone elastomer and nylon. The adhesion strength at the nylon/cured silicone interfaces was substantially enhanced with both silane additives. SFG results elucidated the mechanisms of organo-silane adhesion promotion for silicone at the molecular level. The ability to probe and analyze detailed interfacial reactions at buried nylon/silicone interfaces demonstrated that SFG is a powerful analytical technique to aid the design and optimization of materials with desired interfacial properties.

Thermally Driven Transformation of Water Clustering Structures at Self-Assembled Monolayers

Water clustering structures are considered to play key roles in various temperature-dependent life activities. However, our fundamental understanding of the temperature-dependent water structures remains murky because of the limits of the real-time and real-condition monitoring techniques at the molecular level. We propose an in situ ATR-IR approach combining Gaussian fitting to qualitatively and quantitatively explore the temperature-dependent structural stability and transformation of the three water components, multimer water (MW), intermediate water (IW), and network water (NW), on interfaces with different wettabilities. Our results show that the transformation between NW and IW/MW will occur with a change in temperature. This conversion process shows reversibility on hydrophilic Au NPs film/ZnSe, while it is irreversible on a hydrophobic mercaptohexane self-assembled monolayer due to the irreversibility of the monolayer structure and the hydrophobic confinement effect. The established approach enables us to explore the change in the water properties at any interfaces upon external stimuli.

Solution-Processable Conductive Composite Hydrogels with Multiple Synergetic Networks toward Wearable Pressure/Strain Sensors

A biocompatible, flexible, yet robust conductive composite hydrogel (CCH) for wearable pressure/strain sensors has been achieved by an all-solution-based approach. The CCH is rationally constructed by in situ polymerization of aniline (An) monomers in the polyvinyl alcohol (PVA) matrix, followed by the cross-linking of PVA with glutaraldehyde (GA) as the cross-linker. The unique multiple synergetic networks in the CCH including strong chemical covalent bonds and abundance of weak physical cross-links, i.e., hydrogen bondings and electrostatic interactions, impart excellent mechanical strength (a fracture tensile strength of 1200 kPa), superior compressibility (ε = 80%@400 kPa), outstanding stretchability (a fracture strain of 670%), high sensitivity (0.62 kPa^-1 at a pressure range of 0-1.0 kPa for pressure sensing and a gauge factor of 3.4 at a strain range of 0-300% for strain sensing, respectively), and prominent fatigue resistance (1500 cycling). As the flexible wearable sensor, the CCH is able to monitor different types of human motion and diagnostically distinguish speaking. As a proof of concept, a sensing device has been designed for the real-time detection of 2D distribution of weight or pressure, suggesting its promising potentials for electronic skin, human-machine interaction, and soft robot applications.

Molecular Insights into Adhesion at a Buried Silica-Filled Silicone/Polyethylene Terephthalate Interface

Silicone adhesives are widely used in many important applications in aviation, automotive, construction, and electronics industries. The mixture of (3-glycidoxypropyl)trimethoxysilane (γ-GPS) and hydroxy-terminated dimethyl methylvinyl co-siloxanol (DMMVS) has been widely used as an adhesion promoter in silicone elastomers to enhance the adhesion between silicone and other materials including polymers. The interfacial molecular structures of silicone elastomers and the adhesion promotion mechanisms of a γ-GPS-DMMVS mixture in silicone without a filler or an adhesion catalyst (AC) have been extensively investigated using sum frequency generation (SFG) vibrational spectroscopy previously. In this research, SFG was applied to study interfacial structures of silicone elastomeric adhesives in the presence of a silica filler and/or a zirconium(IV) acetylacetonate adhesion catalyst at the silicone/polyethylene terephthalate (PET) interface in situ nondestructively to understand their individual and synergy effects. The interfacial structures obtained from the SFG study were correlated to the adhesion behavior to PET. The interfacial reactions of methoxy and epoxy groups of the adhesion promoter were found to play significant roles in enhancing the interfacial adhesion of the buried interface. This research provides an in-depth molecular-level understanding on the effects of a filler and an adhesion catalyst on the interfacial behavior of the adhesion promotion system for silicone elastomers as well as the related impact on adhesion.

Probing Molecular Behavior of Carbonyl Groups at Buried Nylon/Polyolefin Interfaces in Situ

Nylon and maleic anhydride (MAH)-grafted polyolefin-based thin co-extruded multilayer films are widely used in packaging applications encountered in daily life. The molecular structure of the nylon/MAH-grafted polyolefin buried interface and molecular bonding between these two chemically dissimilar layers are thought to play an important role in achieving packaging structures with good adhesion. Here, the molecular bonds present at a nylon/maleic anhydride (MAH)-grafted polyethylene buried interface were systematically examined in situ for the first time using sum frequency generation (SFG) vibrational spectroscopy. The carbonyl stretching frequency region of the SFG spectra of a nylon/MAH-grafted polyethylene buried interface showed the presence of hydrolyzed MAH groups grafted to the polyethylene chain and very low levels of unreacted MAH enriched at the buried interface. The ability of SFG to detect these molecular species at the buried interface yields important understanding of the interfacial molecular structure and provides the basis for subsequent in situ studies of the bonding reaction between the grafted MAH and nylon directly at the interface. This understanding may guide the design of multilayer films with improved properties such as enhanced adhesion between polymer layers. The approach used in this study is general and is applicable to study the molecular characteristics of other buried interfaces of significance, such as buried interfaces involving polymers in solar cells, polymer semiconductors, and batteries. Nylon impact modification is another area of interest where the interaction between the MAH-grafted elastomer and the continuous phase of nylon is important.

Strong Hydration at the Poly(ethylene glycol) Brush/Albumin Solution Interface

Albumin molecules are extensively used as biocompatible coatings, and poly(ethylene glycol) (PEG) materials are widely used for antifouling. PEG materials have excellent antifouling property because of their strong surface hydration. Our previous research indicates that hydration at the PEG/bovine serum albumin solution interface is stronger than that at the PEG/water interface. This research shows that this observation is general for different types of albumin molecules. Different albumins including bovine, porcine, rat, rabbit, and sheep serum albumins were studied in this research. It was found that the hydration at the PEG methacrylate (pOEGMA)/albumin solution interface is always stronger than that at the pOEGMA/water interface. Here, we define "strong interfacial hydration" as "ordered strongly hydrogen-bonded interfacial water". We believe that such a strong hydration is because of the strong hydration on the albumin surface, leading to its biocompatible property. All of the albumin molecules demonstrated stronger hydration on the pOEGMA surface compared to other protein molecules such as lysozyme and fibrinogen. The strong hydration on albumin molecules is related to the high surface coverage of glutamic acid and lysine with similar amounts.