Bioinspired Superwettable Covalent Organic Framework Nanofibrous Composite Membrane with a Spindle-Knotted Structure for Highly Efficient Oil/Water Emulsion Separation

Perfluoroalkyl Functionalized Superhydrophobic Covalent Organic Frameworks for Excellent Oil-Water Membrane Separation and Anhydrous Proton Conduction

Rapid economic development has led to oil pollution and energy shortage. Membrane separation has attracted much attention due to its simplicity and efficiency in oil-water-separation. The development of membrane materials with enhanced separation properties is essential to improve the separation-efficiency. Proton exchange membrane fuel cells (PEMFCs) are expected to replace conventional engines due to their high-power-conversion rates and other favorable properties. Anhydrous-proton-conducting materials are vital components of PEMFCs. However, developing stable proton-conducting materials that exhibit high conductivity at varying temperatures remains challenging. Herein, two covalent organic frameworks (COFs) with long-side-chains are synthesized, and their corresponding COF@SSN membranes. Both membranes can effectively separate oil-water mixtures and water-in-oil emulsions. The TFPT-AF membrane achieves a maximum oil-flux of 6.05 × 105 g h-1 m-2 with an oil-water separation efficiency of above 99%, which is almost unchanged after 20 consecutive uses. COF@H3PO4 doped with different ratios of H3PO4 is prepared, the results show that the perfluorocarbon-chain system has  excellent anhydrous proton conductivity , achieving an ultra-high proton-conductivity of 3.98 × 10-1 S cm-1 at 125 °C. This study lays the foundation for tailor-made-functionalization of COF through pre-engineering and surface-modification, highlighting the great potential of COFs for oil-water separation and anhydrous-proton-conductivity.

Nanofibrous Porous Organic Polymers and Their Derivatives: From Synthesis to Applications

Engineering porous organic polymers (POPs) into 1D morphology holds significant promise for diverse applications due to their exceptional processability and increased surface contact for enhanced interactions with guest molecules. This article reviews the latest developments in nanofibrous POPs and their derivatives, encompassing porous organic polymer nanofibers, their composites, and POPs-derived carbon nanofibers. The review delves into the design and fabrication strategies, elucidates the formation mechanisms, explores their functional attributes, and highlights promising applications. The first section systematically outlines two primary fabrication approaches of nanofibrous POPs, i.e., direct bulk synthesis and electrospinning technology. Both routes are discussed and compared in terms of template utilization and post-treatments. Next, performance of nanofibrous POPs and their derivatives are reviewed for applications including water treatment, water/oil separation, gas adsorption, energy storage, heterogeneous catalysis, microwave absorption, and biomedical systems. Finally, highlighting existent challenges and offering future prospects of nanofibrous POPs and their derivatives are concluded.

Covalent organic framework functionalized smart membranes with under-liquid dual superlyophobicity for efficient separation of oil/water emulsions

The smart membrane with under-liquid dual superlyophobicity, which can achieve on-demand separation of oil/water emulsions only by simple liquid pre-wetting, is of essential value for the treatment of complicated real oil/water systems. Here, we first fabricated a stable suspension of imine-linked covalent organic framework nanospheres (TPB-DMTP-COF), and subsequently fabricated COF functionalized smart membranes with under-liquid dual superlyophobicity by immersing polyacrylonitrile-based (PAN-based) membranes into TPB-DMTP-COF nanosphere suspension. Accordingly, effective switchable separation of both oil-in-water and water-in-oil emulsions by TPB-DMTP-COF/PAN membranes can be achieved by employing pre-wetting processes (both the oil contact angle under water and the water contact angle under oil are over 150°). Specifically, the separation flux and the separation efficiency are higher than 1200 L/m2‧h and 98.0 %, and 2100 L/m2‧h and 97.4 % for the surfactant-stabilized oil-in-water and water-in-oil emulsions, respectively. Furthermore, the ultralow adhesions in liquid contributed to the outstanding reusability and antifouling resistance of the prepared TPB-DMTP-COF/PAN membranes. This work provides a feasible approach for fabricating a smart membrane with under-liquid dual superlyophobicity for oily wastewater treatment.

A comprehensive review on the behavior and evolution of oil droplets during oil/water separation by membranes

Membrane separation technology has significant advantages for treating oil-in-water emulsions. Understanding the evolution of oil droplets could reveal the interfacial and colloidal interactions, facilitate the design of advanced membranes, and improve the separation performances. This review on the characteristic behavior and evolution of oil droplets focuses on the advanced analytical techniques, and the subsequent fouling as well as demulsification effects during membrane separation. A detailed introduction is provided on microscopic observations and numerical simulations of the dynamic evolution of oil droplets, featuring real-time in-situ visualization and accurate reconstruction, respectively. Characteristic behaviors of these oil droplets include attachment, pinning, wetting, spreading, blockage, intrusion, coalescence, and detachment, which have been quantified by specific proposed parameters and criteria. The fouling process can be evaluated using Hermia and resistance models. The related adhesion force and intrusion pressure as well as droplet-droplet/membrane interfacial interactions can be accurately quantified using various force analysis methods and advanced force measurement techniques. It is encouraging to note that oil coalescence has been achieved through various effects such as electrostatic interactions, mechanical actions, Laplace pressure/surface free energy gradients, and synergistic effects on functional membranes. When oil droplets become destabilized and coalesce into larger ones, the functional membranes can overcome the limitations of size-sieving effect to attain higher separation efficiency. This not only bypasses the trade-off between permeability and rejection, but also significantly reduces membrane fouling. Finally, the challenges and potential research directions in membrane separation are proposed. We hope this review will support the engineering of advanced materials for oil/water separation and research on interface science in general.

Non-Stop Switching Separation of Superfine Solid/Liquid Dispersed Phases in Oil and Water Systems Using Polymer-Assisted Framework Fiber Membranes

Fabricating filtration membranes with wide applicability and high efficiency is always a challenge in the precise separation of small colloidal particles under mild conditions. For this purpose, a strategy mixing supramolecular framework fiber with polymer is adopted. The fibrous assembly in the gel state provides uniform nanopores for both channel and interception and controlled wettability for lyophilic/lyophobic switching. The used polymer fills the gaps between fiber assemblies and improves the mechanical property. The composite membrane shows both under-oil superhydrophobic and underwater superoleophobic nature, which allows the conversions via in situ modulation of joystick solvents. Based on surface wetting and size-sieving, ultrafine hard nanoparticles dispersing in both hydrophobic organic solvents and water are selectively sieved. In addition, on-demand separation of water-in-oil and oil-in-water microemulsions without and with surfactants as systems containing soft droplets are realized. The smallest cut-off size of ≈3 nm is achieved for both hard and soft emulsions, while separation efficiency maintains during sustained in situ reversible switches.

Solvent‐Influenced Fragmentations in Free‐Standing Three‐Dimensional Covalent Organic Framework Membranes for Hydrophobicity Switching

The ordered open organic frameworks membranes are attractive candidates for flow‐assisted molecular separations. The physicochemical properties of such membranes mostly depend on their selectively chosen functional building blocks. In this work, we have introduced a novel concept of functional switchability of three‐dimensional covalent organic framework (3D‐COF) membranes through a simple solvent‐influenced fragmentation method. This room‐temperature interfacial synthesis provides free‐standing 3D‐COF membranes with distinct physicochemical properties from the same building monomers. Notably, the change of solvent from chloroform to ethyl acetate switches the membrane property from hydrophilic (water contact angle 60°) to hydrophobic (water contact angle 142°) nature. The hydrophobic 3D‐COF membrane selectively passes oil molecules from an oil–water emulsion with a gravitational flux of 1536 L m⁻² h⁻¹.

The High Flux of Superhydrophilic-Superhydrophobic Janus Membrane of cPVA-PVDF/PMMA/GO by Layer-by-Layer Electrospinning for High Efficiency Oil-Water Separation

A simple and novel strategy of superhydrophilic-superhydrophobic Janus membrane was provided here to deal with the increasingly serious oil-water separation problem, which has a very bad impact on environmental pollution and resource recycling. The Janus membrane of cPVA-PVDF/PMMA/GO with opposite hydrophilic and hydrophobic properties was prepared by layer-by-layer electrospinning. The structure of the Janus membrane is as follows: firstly, the mixed solution of polyvinylidene fluoride (PVDF), polymethylmethacrylate (PMMA) and graphene oxide (GO) was electrospun to form a hydrophobic layer, then polyvinyl alcohol (PVA) nanofiber was coated onto the hydrophobic membrane by layer-by-layer electrospinning to form a composite membrane, and finally, the composite membrane was crosslinked to obtain a Janus membrane. The addition of GO can significantly improve the hydrophobicity, mechanical strength and stability of the Janus membrane. In addition, the prepared Janus membrane still maintained good oil-water separation performance and its separation efficiency almost did not decrease after many oil-water separation experiments. The flux in the process of oil-water separation can reach 1909.9 L m-2 h-1, and the separation efficiency can reach 99.9%. This not only proves the separation effect of the nanocomposite membrane, but also shows its high stability and recyclability. The asymmetric Janus membrane shows good oil-water selectivity, which gives Janus membrane broad application prospects in many fields.

Construction of hydrophilic covalent organic frameworks and their fast and efficient adsorption of cationic dyes from aqueous solution

TFPB-Pa-SO3H COF and TFPB-BDSA COF were synthesized and showed fast adsorption of MLB (1 and 2 min) and high adsorption uptakes of CV (1559 and 1288 mg g−1). TFPB-Pa-SO3H COF as adsorbing material was used for the removal of dye molecules in real water samples.

Green Superlubricity Enabled by Only One Water Droplet on Plant Oil-Infused Surfaces

The increase in energy loss due to friction and the use of large amounts of lubricants to improve it are major challenges we face from a global environmental perspective. Pitcher-plant-inspired liquid-infused surfaces (LISs) are emerging super-repellent surfaces against liquids. However, their coefficient of friction (CoF) against solids is higher than that of conventional lubricant surfaces. Herein, we demonstrate superlubricity with a single water droplet placed on a LIS holding oleic acid, a component of plant oil. When a water droplet is placed on the fluid layer, the CoF under reciprocating and rotating friction is 0.012 and 0.0098, respectively. A force in the direction opposite to the loading due to the Laplace pressure on the droplet and an autonomous positional movement of the water accompanied by the optimization of surface energy maintain the fluid-lubrication state and prevent direct contact between the surface and the friction material, resulting in a decrease of the dependence of the CoF on the friction velocity. The key technology here will not only present a novel strategy for preparing LISs against solids but also serve as a step toward a sustainable green strategy for friction reduction and lubrication, which would greatly reduce energy loss and environmental degradation.

Superhydrophilic and Photothermal Fe-TCPP Nanofibrous Membrane for Efficient Oil-in-Water Nanoemulsion Separation

Separation and purification of surfactant-stabilized oil-in-water nanoemulsions is a great environmental challenge. Membrane-based separation strategies are more effective over conventional methods in the treatment of nanoemulsion waste water. In this paper, we construct a superhydrophilic membrane by coating a thin photothermal-responsive iron tetrakis(4-carboxyphenyl)porphyrin (Fe-TCPP) nanofibrous metal organic framework (MOF) selective layer on a macroporous polyethersulfone membrane. The as-prepared membrane exhibits high separation performance of oil-in-water nanoemulsions with permeance of 46.4 L·m^-2·h^-1·bar^-1 and separation efficiency of 99%. It also demonstrates nice anti-oil/ionic-fouling property, good recyclability, and desirable stability. The high separation performance is accredited to the superhydrophilicity, highly charged surface, and nanometer pore sizes of the Fe-TCPP nanofibrous membrane. Due to the unique photothermal property of Fe-TCPP nanofibers, the permeance can be enhanced more than 50% by visible light without deteriorating the rejection. This photo-stimuli MOF-based thin-layer membrane offers great potential for the generation of point-of-use water treatment devices.

Hotpots and trends of covalent organic frameworks (COFs) in the environmental and energy field: Bibliometric analysis

Covalent organic frameworks (COFs) have attracted extensive attention due to their low density, adjustable structure, functionalization, and good stability. This paper systematically and comprehensively describes to qualitatively and quantitatively the progress, trends, and hotspots of COFs in the environmental and energy fields from the perspective of bibliometrics. Herein, based on the Web of Science database, a total of 2589 articles from 2005 to October 6, 2020, were collected. Thereafter, co-occurrence, co-citation analysis, and cluster analysis were conducted using CiteSpace and VOSviewer software. The results indicated that COFs research shows the characteristics of rapid growth. The active countries were mainly USA, Germany, Japan, China, and India. More than half of the top 20 active institutions were from China. The research hotspots in this field were systematically elaborated, including synthesis, adsorption, catalysis, membrane, sensor, and energy storage. Research has shown that various COFs are reasonably designed, synthesized, and used in different applications. For example, when COFs are used for photocatalysis, groups containing photocatalytic active sites are integrated into COFs to improve photocatalytic activity. Finally, some challenges were proposed, that are beneficial to the rapid and balanced development of the COFs field. For instance, the preparation methods still need to be further improved for mass production and there is an imbalance in environmental applications such as fewer sensor and membrane applications. We believe that this study provides a comprehensive and systematic overview of the environmental and energy applications of COFs for future investigations.

The Photocatalysis-Enhanced TiO2@HPAN Membrane with High TiO2 Surface Content for Highly Effective Removal of Cationic Dyes

The elimination of dye pollutants from wastewater is a significant concern that has prompted extensive research into the development of highly efficient photocatalytic membranes. A novel method was proposed to prepare photocatalysis-enhanced poly(acrylonitrile-methyl acrylate) (PAN-based) membranes in this study. In detail, the blended membrane containing SiO₂@TiO₂ nanoparticles with a shell-core structure was first prepared via thermal-induced phase separation. The SiO₂ nanoshells were dissolved, and the released TiO₂ nanoparticles migrated to the membrane surface during a simple hydrolysis process, which prevents the TiO₂ nanoparticles from directly contacting or interacting with the polymer matrix. The hydrogen bonds bind the exposed TiO₂ with the PAN membrane surface, resulting in the formation of the TiO₂@HPAN hybrid membrane. The photocatalytic efficiency of the TiO₂@HPAN membrane doubled compared with that of nonhydrolyzed membranes. In the presence of UV light, the hybrid membrane can degrade 99.8% of methylene blue solution in less than 2 h, compared to only 86.1% for the blended membranes. Further, the TiO₂@HPAN membrane showed excellent photocatalytic activity for cationic dyes due to electrostatic attraction. Moreover, the high-flux recovery rate and recycling stability of the TiO₂@HPAN membrane lead to an excellent antifouling property. The facile preparation method proposed in this work shows extraordinary potential for the development of highly efficient selective photocatalytic materials for cationic dyes to be used in wastewater treatment applications.

Emerging new-generation hybrids based on covalent organic frameworks for industrial applications

This review highlights the advancement of COF hybrid-based materials for diverse industrial applications.

A Self-Cleaning Heterostructured Membrane for Efficient Oil-in-Water Emulsion Separation with Stable Flux

Lack of clean water is a major global challenge. Membrane separation technology is an ideal choice for the treatment of industrial, domestic sewage owing to its low energy consumption and cost. However, membranes are highly susceptible to contamination, particularly during wastewater treatment, which has limited their practical applications in this field. Similarly, the flux of the membrane decreases with prolonged use due to its reduced interlayer spacing. Preparation of membranes with anticontamination properties and stable flux is the key to addressing this problem. In this study, a 2D heterostructure membrane with visible-light-driven self-cleaning performance is prepared via a self-assembly process. Notably, the addition of palygorskite increases the interlayer spacing of the graphene and heterojunction structures, which increases the flux of the membrane and avoids a decrease of the interlayer spacing of the membrane under pressure. The presence of a heterojunction with visible light catalytic properties effectively avoids membrane fouling and avoids a sharp decrease of the permeation flux. Importantly, the prepared 2D membrane has excellent separation performance for oil-water emulsions with both high flux and efficiency. These features suggest great potential for the prepared 2D membrane in wastewater treatment applications.