Mechanical Properties of DPPC-POPE Mixed Langmuir Monolayers

Exploring the Use of a Lipopeptide in Dipalmitoylphosphatidylcholine Monolayers for Enhanced Detection of Glyphosate in Aqueous Environments

The growing reliance on pesticides for pest management in agriculture highlights the need for new analytical methods to detect these substances in food and water. Our research introduces a SPRWG-(C18H37) lipopeptide (LP) as a functional analog of acetylcholinesterase (AChE) for glyphosate detection in environmental samples using phosphatidylcholine (PC) monolayers. This LP, containing hydrophilic amino acids linked to an 18-carbon aliphatic chain, alters lipid assembly properties, leading to a more flexible system. Changes included reduced molecular area and peak pressure in Langmuir adsorption isotherms. Small angle X-ray scattering (SAXS) and atomic force microscopy (AFM) analyses provided insights into the LP's structural organization within the membrane and its interaction with glyphosate (PNG). Structural and geometric parameters, as derived from in silico molecular dynamics simulations (MD), substantiated the impact of LP on the monolayer structure and the interaction with PNG. Notably, the presence of the LP and glyphosate increased charge transfer resistance, indicating strong adherence of the monolayer to the indium tin oxide (ITO) surface and effective pesticide interaction. A calibration curve for glyphosate concentration adjustment revealed a detection limit (LOD) of 24 nmol L-1, showcasing the high sensitivity of this electrochemical biosensor. This LOD is significantly lower than that of a similar colorimetric biosensor in aqueous media with a detection limit of approximately 0.3 μmol L-1. Such an improvement in sensitivity likely stems from adding a polar residue to the amino acid chain of the LP.

Interactions of Brominated Flame Retardants with Membrane Models of Dehalogenating Bacteria: Langmuir Monolayer and Grazing Incidence X-ray Diffraction Studies

Brominated flame retardants (BFRs) are small organic molecules containing several bromine substituents added to plastics to limit their flammability. BFRs can constitute up to 30% of the weight of some plastics, which is why they are produced in large quantities. Along with plastic waste and microplastic particles, BFRs end up in the soil and can easily leach causing contamination. As polyhalogenated molecules, multiple BFRs were classified as persistent organic pollutants (POPs), meaning that their biodegradation in the soils is especially challenging. However, some anaerobic bacteria as Dehaloccocoides can dehalogenate BFRs, which is important in the bioremediation of contaminated soils. BFRs are hydrophobic, can accumulate in plasma membranes, and disturb their function. On the other hand, limited membrane accumulation is necessary for BFR dehalogenation. To study the BFR-membrane interaction, we created membrane models of soil dehalogenating bacteria and tested their interactions with seven legacy and novel BFRs most common in soils. Phospholipid Langmuir monolayers with appropriate composition were used as membrane models. These membranes were doped in the selected BFRs, and the incorporation of BFR molecules into the phospholipid matrix and also the effects of BFR presence on membrane physical properties and morphology were studied. It turned out that the seven BFRs differed significantly in their membrane affinity. For some, the incorporation was very limited, and others incorporated effectively and could affect membrane properties, while one of the tested molecules induced the formation of bilayer domains in the membranes. Thus, Langmuir monolayers can be effectively used for pretesting BFR membrane activity.

Interaction of sakuranetin with unsaturated lipids forming Langmuir monolayers at the air-water interface: A biomembrane model

This study investigates the interaction between sakuranetin, a versatile pharmaceutical flavonoid, and monolayers composed of unsaturated phospholipids, serving as a surrogate for cell membranes. The phospholipids were 1-palmitoyl-2-oleoyl-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE). We conducted a series of experiments to comprehensively investigate this interaction, including surface pressure assessments, Brewster angle microscopy (BAM), and polarization-modulated infrared reflection-absorption spectroscopy (PM-IRRAS). Our findings unequivocally demonstrate that sakuranetin interacts with these phospholipids, expanding the monomolecular films. Notably, regarding POPC, the presence of sakuranetin led to a reduction in stability and a decline in surface elasticity, which can likely be attributed to intricate molecular rearrangements at the interface. The visual evidence of aggregations in BAM images reinforces the interactions substantiated by PM-IRRAS, highlighting sakuranetin's interaction with the polar and nonpolar regions of POPC. However, it is worth noting that these aggregations do not appear to contribute significantly to the viscosity of the mixed film, and our investigations did not reveal any substantial hysteresis. In contrast, when examining POPE, we observed a minor reduction in thermodynamic stability, indicative of fewer rearrangements within the monolayer. This notion was further reinforced by the limited presence of aggregations in the BAM images. Sakuranetin also increased the rigidity of the lipid monolayer; nevertheless, the monolayer remained predominantly elastic, facilitating easy re-spreading on the surface, especially for the first lipid. PM-IRRAS analysis unveiled interactions between sakuranetin and POPE's polar and nonpolar segments, compellingly explaining the observed monolayer expansion. Taken together, our data suggest that sakuranetin was more effectively incorporated into the monomolecular layer of POPE, indicating that membranes comprised of POPC might exhibit a greater degree of interaction in the presence of this pharmacologically active compound.

Langmuir monolayer of lysozyme at variable subphase pH conditions: a comprehensive study on structure, morphology and hysteresis behaviour

Formation of a pure Langmuir monolayer of lysozyme at the air-water interface and its investigation by means of a surface pressure (π)-mean molecular area (A) isotherm has been accomplished under different subphase pH conditions. A normalized area-time curve confirms the stable nature of the lysozyme monolayer whose compressibility variation with an increased surface pressure at specific subphase pH has also been studied from π-A isotherms. The monolayers exhibit irreversible hysteresis behaviour irrespective of subphase pH conditions, as evidenced from successive compression-expansion π-A isotherm cycles. Comparison of surface thermodynamics under hysteresis with subphase pH variation confirms that the monolayer at subphase pH ≈ 4.0 involves a greater amount of energy to attain and retain the ordered and compact monolayer than the other two pH conditions (pH ≈ 7.0 and 9.5). In situ visualization of lysozyme monolayers by Brewster angle microscopy suggests the homogeneous and stripe-like pattern formation at lower and higher surface pressure respectively. Further investigations of lysozyme films at solid surfaces have been carried out with atomic force microscopy and X-ray reflectivity (XRR) analysis. Structural reversibility of lysozyme molecules under compression-expansion-compression of the monolayer is revealed from the comparison of height profiles of AFM images and electron density profiles as extracted from XRR analysis of the films deposited during both first and second compressions of the monolayer. The mechanism of the structural rearrangement of lysozyme molecules with surface pressure variation at different subphase pH is explored, correlating macroscopic and microscopic information.

Seaweed and Dendritic Growth in Unsaturated Fatty Acid Monolayers

The lateral movement in lipid membranes depends on their diffusion constant within the membrane. However, when the flux of the subphase is high, the convective flow beneath the membrane also influences lipid movement. Lipid monolayers of an unsaturated fatty acid at the water-air interface serve as model membranes. The formation of domains in the liquid/condensed coexistence region is investigated. The dimension of the domains is fractal, and they grow with a constant growth velocity. Increasing the compression speed of the monolayer induces a transition from seaweed growth to dendritic growth. Seaweed domains have broad tips and wide and variable side branch spacing. In contrast, dendritic domains have a higher fractal dimension, narrower tips, and small, well-defined side branch spacing. Additionally, the growth velocity is markedly larger for dendritic than seaweed growth. The domains' growth velocity increases and the tip radius decreases with increasing supersaturation in the liquid/condensed coexistence region. Implications for membranes are discussed.

A Sebum-Mimetic Lipid Monolayer and Its Interaction with (Bio)Surfactants

Surfactants present in cleansing formulations interact not only with the unwanted lipids accumulating on the human skin (dirt) but also with its protective lipidic layer (sebum). Development of simple models of human sebum would help to compare different surfactants and biosurfactants under the same conditions. In this contribution we propose a first monolayer model of synthetic sebum composed of lard, stearic acid, lanolin, squalane and cholesterol. The monolayer compression isotherm features a gas-liquid (G-LE1), two liquid-liquid transitions (LE1-LE2 and LE2-LC), and a collapse at πcoll = 45 mN/m. The monolayer spread on pure water and pre-compressed to π0 = 30 mN/m was exposed to four synthetic surfactants (sodium lauryl sulfate (SLS), sodium laureth sulfate (SLES), ammonium lauryl sulfate (ALS) and cocamidopropyl betaine (CAPB)) and four plant extracts (oat (Avena sativa L.), horse chestnut (Aesculus hippocastanum L.), cowherb (Vaccaria hispanica [P. Mill.] Rauschert), soybean (Glycine max L.) and soapwort (Saponaria officinalis L.)) introduced to the subphase at a dry mass content of 1% (w/w). Three modes of the monolayer-(bio)surfactant interactions were observed: (1) complete solubilization (SLS, SLES, ALS, CAPB); (2) penetration accompanied by an increase of surface pressure and elasticity but without solubilization (horse chestnut, cowherb, soapwort); (3) no interaction (oat, soybean).

Membrane Potentials Trigger Molecular-Scale Rearrangements in the Outer Membrane of Gram-Negative Bacteria

The structural complexity of the cell envelope of Gram-negative bacteria limits the fabrication of realistic models of bacterial cell membranes. A vertical Langmuir-Blodgett withdrawing was used to deposit a 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) monolayer on the Au(111) surface. The second leaflet composed of di[3-deoxy-D-manno-octulosonyl]-lipid A (KLA) was deposited using Langmuir-Schaefer transfer. The use of an electrode material as a support for the POPE-KLA bilayer allowed electrochemical control of the membrane's stability, compactness, and structure. Capacitance-potential curves showed a typical pattern for the supported lipid bilayers electrochemical characteristic. The minimum membrane capacitance was ∼4 μF cm^-2 and did not change in the following desorption-adsorption cycles, indicating the presence of a stable bilayer structure with an asymmetric composition of both leaflets. However, at a molecular scale, as elucidated in spectroelectrochemical experiments, large differences in the response of both leaflets to electric potentials were observed. The acyl chains in POPE and KLA existed in a liquid state. The quantitative analysis of the CH stretching modes indicated potential-driven reorientations in the hydrophobic fragment of the bilayer, already in the adsorbed state. To assign observed rearrangements to POPE and KLA lipids in both leaflets, per-deuterated d₃₁-POPE was transferred into the inner leaflet. Since no potential-dependent changes of the CD₂ stretching modes in the d₃₁-POPE-KLA bilayer were observed, reorientations in the acyl chain region were assigned to the KLA molecules. Mg²⁺ ions were bound to the polar head groups of KLA. The strength of electrostatic interactions in the polar head group region of KLA was dependent on the direction of the electric field. At negative electric potentials, the binding of divalent cations weakened, which gave the KLA molecules increased orientational flexibility. This behavior in electric fields is peculiar for the outer membrane and indicates that the microbial cell membranes have different electrochemical properties than phospholipid bilayers.

Flow field-based data analysis in interfacial shear rheometry

Developments in interfacial shear rheometers have considerably improved the quality of experimental data. However, data analysis in interfacial shear rheometry is still an active field of research and development due to the intrinsic complexity introduced by the unavoidable contact of the interface with, at least, one supporting bulk subphase. Nonlinear velocity profiles, both at the interface and the bulk phases, pervade the system dynamical behavior in the most usual experimental geometries, particularly in the case of soft interfaces. Such flow configurations demand data analysis schemes based on the explicit calculation of the flow field in both the interface and the bulk phases. Such procedures are progressively becoming popular in this context. In this review, we discuss the most recent advances in interfacial shear rheology data analysis techniques. We extensively review some recently proposed flow field-based data analysis schemes for the three most common interfacial shear rheometer geometries (magnetic needle, double wall-ring, and bicone), showing under what circumstances the calculation of the flow field is mandatory for a proper analysis of the experimental data. All cases are discussed starting at the appropriate hydrodynamical models and using the equation of motion of the probe to set up an iterative procedure to compute the value of the complex Boussinesq number and, from it, the complex interfacial viscosity or, equivalently, the complex interfacial modulus. Moreover, two examples of further extensions of such techniques are proposed, concerning the micro-button interfacial shear rheometer and the potential application of interfacial rheometry instruments, together with adapted flow field-based data analysis techniques, for bulk rheometry, particularly in the case of soft samples.