Highly Active Zinc Sulfide Composite Microspheres: A Versatile Template for Synthesis of a Family of Hollow Nanostructures of Sulfides

Recent Progress of Metal Sulfide Photocatalysts for Solar Energy Conversion

Artificial photosynthetic solar-to-chemical cycles enable an entire environment to operate in a more complex, yet effective, way to perform natural photosynthesis. However, such artificial systems suffer from a lack of well-established photocatalysts with the ability to harvest the solar spectrum and rich catalytic active-site density. Benefiting from extensive experimental and theoretical investigations, this bottleneck may be overcome by devising a photocatalytic platform based on metal sulfides with predominant electronic, physical, and chemical properties. These tunable properties can endow them with abundant active sites, favorable light utilization, and expedited charge transportation for solar-to-chemical conversion. Here, it is described how some vital lessons extracted from previous investigations are employed to promote the further development of metal sulfides for artificial photosynthesis, including water splitting, CO₂ reduction, N₂ reduction, and pollutant removal. Their functions, properties, synthetic strategies, emerging issues, design principles, and intrinsic functional mechanisms for photocatalytic redox reactions are discussed in detail. Finally, the associated challenges and prospects for the utilization of metal sulfides are highlighted and future development trends in photocatalysis are envisioned.

Nano-ZnS decorated hierarchically porous carbon electrocatalyst with multiple enzyme-like activities as a nanozyme sensing platform for simultaneous detection of dopamine, uric acid, guanine, and adenine

The simultaneous detection of multiple biological small molecules is critical for human health evaluation and disease prevention. In this study, a nano-ZnS decorated hierarchically porous carbon (ZSHPC) electrocatalyst with multiple enzyme-like activities as a nanozyme sensing platform for simultaneous derivative voltametric detection of four important biological small molecules, dopamine (DA), uric acid (UA), guanine (G), and adenine (A), is successfully synthesized via an in situ hydrothermal reaction using leaves of Cinnamomum camphora (L.) after the extraction of essential oil as a carbon source, ZnCl₂ as both zinc source and an activator, sulfuric acid as a sulfur source, and silica gel as a hard template. Activator together with the introduction of silica gel is beneficial for tuning pore structure. The in situ synthesized ZnS nanoparticles and sulfur doping improve the conductivity and cycling stability of the material. The ZSHPC electrode with multiple enzyme-like activities and oxidase-like characteristics was employed for the simultaneous detection of multiple target molecules in linear ranges of 0.3-500 μM with detection limits of 0.12 μM for DA, 0.26 μM for UA, 0.07 μM for G, and 0.075 μM for A. A derivative technique was selected for enhancing the peak resolution of the partial overlapped voltammograms and eliminating human error. Both the coefficient of determination and residual prediction deviation were used to evaluate this technique.

Cd0.5Zn0.5S/CoWO4 Nanohybrids with a Twinning Homojunction and an Interfacial S-Scheme Heterojunction for Efficient Visible-Light-Induced Photocatalytic CO2 Reduction

The construction of a phase junction photocatalyst can significantly enhance the photocatalytic performance with high selectivity for CO₂ reduction. In this study, an S-scheme junction Cd_0.5Zn_0.5S/CoWO₄ semiconductor with the coupling of a twin crystal Cd_0.5Zn_0.5S homojunction and CoWO₄ was designed through a hydrothermal method, which could convert CO₂ to CO with high efficiency under visible-light illumination. Cd_0.5Zn_0.5S-10%CoWO₄ exhibited the optimal performance and its CO yield and selectivity were up to 318.68 μmol·g^-1 and 95.90%, respectively, which were 4.54 and 1.62 times higher than that of twin crystal Cd_0.5Zn_0.5S. Moreover, the Cd_0.5Zn_0.5S homojunction with a zinc-blende and wurtzite phase and the S-scheme phase junction of Cd_0.5Zn_0.5S/CoWO₄ enhanced the property of CO₂ adsorption and accelerated the detachment of photogenerated carriers. The combination of photogenerated holes in Cd_0.5Zn_0.5S and the electrons of CoWO₄ can retain the reduction sites to improve photocatalytic performance. This study provides a neoteric concept and reference for the construction of the S-scheme phase junction.

Interfacially Engineered ZnxMn1-xS@Polydopamine Hollow Nanospheres for Glutathione Depleting Photothermally Enhanced Chemodynamic Therapy

Fenton-like reactions driven by manganese-based nanostructures have been widely applied in cancer treatment owing to the intrinsic physiochemical properties of these nanostructures and their improved sensitivity to the tumor microenvironment. In this work, Zn_xMn_1-xS@polydopamine composites incorporating alloyed Zn_xMn_1-xS and polydopamine (PDA) were constructed, in which the Fenton-like reactions driven by Mn ions can be tuned by a controllable release of Mn ions in vitro and in vivo. As a result, the Zn_xMn_1-xS@PDA exhibited good biocompatibility with normal cells but was specifically toxic to cancer cells. In addition, the shell thickness of PDA was carefully investigated to obtain excellent specific toxicity to cancer cells and promote synergistic chemodynamic and photothermal therapies. Overall, this work highlights an alternative strategy for fabricating high-performance, multifunctional composite nanostructures for a combined cancer treatment.

Facile Synthesis of Thermo-Sensitive Composite Hydrogel with Well Dispersed Ag Nanoparticles for Application in Superior Antibacterial Infections

In this study, we have described a facile process for fabrication of multifunctional composite hydrogel, in which sodium alginate was subjected to cross-linking using Ca²⁺ derived from ZnO/CaCO₃/Ag composite nanospheres. The ZnO/CaCO₃/Ag composite nanospheres were prepared based on our previously reported AA-[Zn(OH)₄]^2- composite nanosphere reaction conducted with silver and calcium salt following hydrothermal method, that led to the disintegration and release of Ca²⁺ under acidic conditions for application as a cross-linking agentto catalyze reaction with sodium alginate. Ag nanoparticles were well-dispersed in the multifunctional composite hydrogel, exhibiting excellent antibacterial activity. Additionally, polydopamine (PDA) with photothermal effect was also added to obtain a multifunctional composite hydrogel, and this hydrogel showed photothermal conversion performance and facilitated the release of Ag⁺ to achieve the rapid antibacterial effect. Simultaneously, PDA NPs could scavenge free radicals and improve cell adhesion. All such features would promote wound healing. The potent antimicrobial activity of the prepared composite hydrogel was demonstrated in the mouse model of S. aureus infection, and biosafety of the hydrogel was confirmed by conducting histopathological examination in the mouse model. This type of multifunctional hydrogel wound dressing with photosensitive and antibacterial properties presents with broad applications and prospects in antibacterial treatment.

Upconversion nanoparticles modified by Cu2S for photothermal therapy along with real-time optical thermometry

Highly effective photothermal conversion performance coupled with high resolution temperature detection in real time is urgently needed for photothermal therapy (PTT). Herein, ultra-small Cu₂S nanoparticles (NPs) were designed to absorb on the surface of NaScF₄: Yb³⁺/Er³⁺/Mn²⁺@NaScF₄@SiO₂ NPs to form a central-satellite system, in which the Cu₂S NPs play the role of providing significant light-to-heat conversion ability and the Er³⁺ ions in the NaScF₄: Yb³⁺/Er³⁺/Mn²⁺ cores act as a thermometric probe based on the fluorescence intensity ratio (FIR) technology operating in the biological windows. A wavelength of 915 nm is used instead of the conventional 980 nm excitation wavelength to eliminate the laser induced overheating effect for the bio-tissues, by which Yb³⁺ can also be effectively excited. The temperature resolution of the FIR-based optical thermometer is determined to be better than 0.08 K over the biophysical temperature range with a minimal value of 0.06 K at 298 K, perfectly satisfying the requirements of biomedicine. Under the radiation of 915 nm light, the Cu₂S NPs exhibit remarkable light-to-heat conversion capacity, which is proved by photothermal ablation testing of E. coli. The results reveal the enormous potential of the present NPs for PTT integrated with real-time temperature sensing with high resolution.

Recent Development on Controlled Synthesis of Metal Sulfides Hollow Nanostructures via Hard Template Engaged Strategy: A Mini-Review

In this mini-review, we highlighted the recent progresses in the controlled synthesis of metal sulfides hollow nanostructures via hard template technique. After a brief introduction about the formation mechanism of the inorganic hollow nanostructures via hard template technique, the discussions primarily focused on the emerging development of metal sulfides hollow nanostructures. Various synthetic strategies were summarized concerning the use of the hard template engaged strategies to fabricate various metal sulfides hollow nanostructures, such as hydrothermal method, solvothermal method, ion-exchange, sulfidation or calcination etc. Finally, the perspectives and summaries have been presented to demonstrate that a facile synthetic technique would be widely used to fabricate metal sulfides hollow nanostructures with multi-shells and components.