Lasalocid Acid Antibiotic at a Membrane Surface Probed by Sum Frequency Generation Spectroscopy

Light on the interactions between nanoparticles and lipid membranes by interface-sensitive vibrational spectroscopy

Nanoparticles are produced in natural phenomena or synthesized artificially for technological applications. Their frequent contact with humans has been judged potentially harmful for health, and numerous studies are ongoing to understand the mechanisms of the toxicity of nanoparticles. At the macroscopic level, the toxicity can be established in vitro or in vivo by measuring the survival of cells. At the sub-microscopic level, scientists want to unveil the molecular mechanisms of the first interactions of nanoparticles with cells via the cell membrane, before the toxicity cascades within the whole cell. Unveiling a molecular understanding of the nanoparticle-membrane interface is a tricky challenge, because of the chemical complexity of this system and its nanosized dimensions buried within bulk macroscopic environments. In this review, we highlight how, in the last 10 years, second-order nonlinear optical (NLO) spectroscopy, and specifically vibrational sum frequency generation (SFG), has provided a new understanding of the structural, physicochemical, and dynamic properties of these biological interfaces, with molecular sensitivity. We will show how the intrinsic interfacial sensitivity of second-order NLO and the chemical information of vibrational SFG spectroscopy have revealed new knowledge of the molecular mechanisms that drive nanoparticles to interact with cell membranes, from both sides, the nanoparticles and the membrane properties.

The Biological Activities of Polyether Ionophore Antibiotic Routiennocin is Independent of Absolute Stereochemistry

Carboxylic polyether ionophores (CPIs) are among the most prevalent agricultural antibiotics (notably in the US) and these compounds have been in use for decades. The potential to reposition CPIs beyond veterinary use, e. g. through chemical modifications to enhance their selectivity window, is an exciting challenge and opportunity, considering their general resilience towards resistance development. Given the very large societal impact of these somewhat controversial compounds, it is surprising that many aspects of their mechanisms and activities in cells remain unclear. Here, we report comparative biological activities of the CPI routiennocin and two stereoisomers, including its enantiomer. We used an efficient convergent synthesis strategy to access the compounds and conducted a broad survey of antibacterial activities against planktonic cells and biofilms as well as the compounds' effects on mammalian cells, the latter assessed both via standard cell viability assays and broad morphological profiling. Interestingly, similar bioactivity of the enantiomeric pair was observed across all assays, strongly suggesting that chiral interactions do not play a decisive role in the mode of action. Overall, our findings are consistent with a mechanistic model involving highly dynamic behaviour of CPIs in biological membranes.

Elevated concentrations cause upright alpha-synuclein conformation at lipid interfaces

The amyloid aggregation of α-synuclein (αS), related to Parkinson's disease, can be catalyzed by lipid membranes. Despite the importance of lipid surfaces, the 3D-structure and orientation of lipid-bound αS is still not known in detail. Here, we report interface-specific vibrational sum-frequency generation (VSFG) experiments that reveal how monomeric αS binds to an anionic lipid interface over a large range of αS-lipid ratios. To interpret the experimental data, we present a frame-selection method ("ViscaSelect") in which out-of-equilibrium molecular dynamics simulations are used to generate structural hypotheses that are compared to experimental amide-I spectra via excitonic spectral calculations. At low and physiological αS concentrations, we derive flat-lying helical structures as previously reported. However, at elevated and potentially disease-related concentrations, a transition to interface-protruding αS structures occurs. Such an upright conformation promotes lateral interactions between αS monomers and may explain how lipid membranes catalyze the formation of αS amyloids at elevated protein concentrations.

Conformation and Orientation of Antimicrobial Peptides MSI-594 and MSI-594A in a Lipid Membrane

There is significant interest in the development of antimicrobial compounds to overcome the increasing bacterial resistance to conventional antibiotics. Studies have shown that naturally occurring and de novo-designed antimicrobial peptides could be promising candidates. MSI-594 is a synthetic linear, cationic peptide that has been reported to exhibit a broad spectrum of antimicrobial activities. Investigation into how MSI-594 disrupts the cell membrane is important for better understanding the details of this antimicrobial peptide (AMP)'s action against bacterial cells. In this study, we used two different synthetic lipid bilayers: zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and anionic 7:3 POPC/1-palmitoyl-2-oleoyl-sn-glycero-3-phospho(1'-rac-glycerol) (POPG). Sum frequency generation (SFG) vibrational spectroscopy and attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) were used to determine the orientations of MSI-594 and its analogue MSI-594A associated with zwitterionic POPC and anionic 7:3 POPC/POPG lipid bilayers. The simulated ATR-FTIR and SFG spectra using nuclear magnetic resonance (NMR)-determined structures were compared with experimental spectra to optimize the bent angle between the N- (1-11) and C- (12-24) termini helices and the membrane orientations of the helices; since the NMR structure of the peptide was determined from lipopolysaccharide (LPS) micelles, the optimization was needed to find the most suitable conformation and orientation in lipid bilayers. The reported experimental results indicate that the optimized MSI-594 helical hairpin structure adopts a complete lipid bilayer surface-bound orientation (denoted "face-on") in both POPC and 7:3 POPC/POPG lipid bilayers. The analogue peptide, MSI-584A, on the other hand, exhibited a larger bent angle between the N- (1-11) and C- (12-24) termini helices with the hydrophobic C-terminal helix inserted into the hydrophobic region of the bilayer (denoted "membrane-inserted") when interacting with both POPC and 7:3 POPC/POPG lipid bilayers. These experimental findings on the membrane orientations suggest that both peptides are likely to disrupt the cell membrane through the carpet mechanism.

Shape-dependent gold nanoparticle interactions with a model cell membrane

Customizable gold nanoparticle platforms are motivating innovations in drug discovery with massive therapeutic potential due to their biocompatibility, stability, and imaging capabilities. Further development requires the understanding of how discrete differences in shape, charge, or surface chemistry affect the drug delivery process of the nanoparticle. The nanoparticle shape can have a significant impact on nanoparticle function as this can, for example, drastically change the surface area available for modifications, such as surface ligand density. In order to investigate the effects of nanoparticle shape on the structure of cell membranes, we directly probed nanoparticle-lipid interactions with an interface sensitive technique termed sum frequency generation (SFG) vibrational spectroscopy. Both gold nanostars and gold nanospheres with positively charged ligands were allowed to interact with a model cell membrane and changes in the membrane structure were directly observed by specific SFG vibrational modes related to molecular bonds within the lipids. The SFG results demonstrate that the +Au nanostars both penetrated and impacted the ordering of the lipids that made up the membrane, while very little structural changes to the model membrane were observed by SFG for the +Au nanospheres interacting with the model membrane. This suggests that the +Au nanostars, compared to the +Au nanospheres, are more disruptive to a cell membrane. Our findings indicate the importance of shape in nanomaterial design and provide strong evidence that shape does play a role in defining nanomaterial-biological interactions.

Theoretical Sum Frequency Generation Spectra of Protein Amide with Surface-Specific Velocity-Velocity Correlation Functions

Vibrational sum frequency generation (vSFG) spectroscopy is widely used to probe the protein structure at interfaces. Because protein vSFG spectra are complex, they can only provide detailed structural information if combined with computer simulations of protein molecular dynamics and spectra calculations. We show how vSFG spectra can be accurately modeled using a surface-specific velocity-velocity scheme based on ab initio normal modes. Our calculated vSFG spectra show excellent agreement with the experimental sum frequency spectrum of LTα14 peptide and provide insight into the origin of the characteristic α-helical amide I peak. Analysis indicates that the peak shape can be explained largely by two effects: (1) the uncoupled response of amide groups located on opposite sides of the α-helix will have different orientations with respect to the interface and therefore different local environments affecting the local mode vibrations and (2) vibrational splitting from nearest neighbor coupling evaluated as inter-residue vibrational correlation. The conclusion is consistent with frequency mapping techniques with an empirically based ensemble of peptide structures, thus showing how time correlation approaches and frequency mapping techniques can give independent yet complementary molecular descriptions of protein vSFG. These models reveal the sensitive relationship between protein structure and their amide I response, allowing exploitation of the complicated molecular vibrations and their interference to derive the structures of proteins under native conditions at interfaces.

Molecular Interactions between Amino Silane Adhesion Promoter and Acrylic Polymer Adhesive at Buried Silica Interfaces

In this study, the influence of an amino silane (3-(2-aminoethylamino)-propyldimethoxymethylsilane, AEAPS) on the interfacial structure and adhesion of butyl acrylate/methyl methacrylate copolymers (BAMMAs) to silica was investigated by sum frequency generation vibrational spectroscopy (SFG). Small amounts of methacrylic acid, MAA, were included in the BAMMA polymerizations to assess the impact of carboxylic acid functionality on the glass interface. SFG was used to probe the O-H and C═O groups of incorporated MAA, ester C═O groups of BAMMA, and CH groups from all species at the silica interfaces. The addition of AEAPS resulted in a significant change in the molecular structure of the polymer at the buried interface with silica due to specific interactions between the BAMMA polymers and silane. SFG results were consistent with the formation of ionic bonds between the primary and secondary amines of the AEAPS tail group and the MAA component of the polymer, as evidenced by the loss of the MAA O-H and C═O signals at the interface. It is extensively reported in the literature that methoxy head groups of an amino silane chemically bind to the silanols of glass, leaving the amine groups available to react with various chemical functionalities. Our results are consistent with this scenario and support an adhesion promotion mechanism of amino silane with various aspects: (1) the ionic bond formation between the tail amine group and acid functionality on BAMMA, (2) the chemical coupling between the silane head group and glass, (3) migration of more ester C═O groups to the interface with order, and (4) disordering or reduced levels of CH groups at the interface. These results are important for better understanding of the mechanisms and effect of amino silanes on the adhesion between acrylate polymers and glass substrates in a variety of applications.

Structure and Orientation of the SARS-Coronavirus-2 Spike Protein at Air-Water Interfaces

The SARS coronavirus 2 (SARS-CoV-2) spike protein is located at the outermost perimeter of the viral envelope and is the first component of the virus to make contact with surrounding interfaces. The stability of the spike protein when in contact with surfaces plays a deciding role for infection pathways and for the viability of the virus after surface contact. While cryo-EM structures of the spike protein have been solved with high resolution and structural studies in solution have provided information about the secondary and tertiary structures, only little is known about the folding when adsorbed to surfaces. We here report on the secondary structure and orientation of the S1 segment of the spike protein, which is often used as a model protein for in vitro studies of SARS-CoV-2, at the air-water interface using surface-sensitive vibrational sum-frequency generation (SFG) spectroscopy. The air-water interface plays an important role for SARS-CoV-2 when suspended in aerosol droplets, and it serves as a model system for hydrophobic surfaces in general. The SFG experiments show that the S1 segment of the spike protein remains folded at the air-water interface and predominantly binds in its monomeric state, while the combination of small-angle X-ray scattering and two-dimensional infrared spectroscopy measurements indicate that it forms hexamers with the same secondary structure in aqueous solution.

Natural Polyether Ionophores and Their Pharmacological Profile

This review is devoted to the study of the biological activity of polyether ionophores produced by bacteria, unicellular marine algae, red seaweeds, marine sponges, and coelenterates. Biological activities have been studied experimentally in various laboratories, as well as data obtained using QSAR (Quantitative Structure-Activity Relationships) algorithms. According to the data obtained, it was shown that polyether toxins exhibit strong antibacterial, antimicrobial, antifungal, antitumor, and other activities. Along with this, it was found that natural polyether ionophores exhibit such properties as antiparasitic, antiprotozoal, cytostatic, anti-mycoplasmal, and antieczema activities. In addition, polyethers have been found to be potential regulators of lipid metabolism or inhibitors of DNA synthesis. Further study of the mechanisms of action and the search for new polyether ionophores and their derivatives may provide more effective therapeutic natural polyether ionophores for the treatment of cancer and other diseases. For some polyether ionophores, 3D graphs are presented, which demonstrate the predicted and calculated activities. The data presented in this review will be of interest to pharmacologists, chemists, practical medicine, and the pharmaceutical industry.

Long seed, short pump: converting Yb-doped laser radiation to multi-µJ few-cycle pulses tunable through 2.5-15 µm

We present a setup for generating broadband (up to 1050 cm^-1) and broadly tunable (2.5-15 µm) mid-infrared pulses using an Yb-doped femtosecond laser as the pump source. Our scheme, comprising two parametric amplifiers and a mixing stage, exploits favorable group velocity matching conditions in GaSe pumped at 2 µm to directly produce sub-70 fs pulses throughout the tuning range without any additional dispersion compensation, while 30-50 fs pulse durations are achieved with simple dispersion compensation by propagation through thin bulk media. The generated pulses have sub-1% short- and long-term energy noise, as well as stable spectral parameters, while delivering 0.5-2 W average mid-IR power. We expect the source to be useful for various spectroscopic applications in the mid-IR.

Revealing the Molecular Physics of Lattice Self-Assembly by Vibrational Hyperspectral Imaging

Lattice self-assemblies (LSAs), which mimic protein assemblies, were studied using a new nonlinear vibrational imaging technique called vibrational sum-frequency generation (VSFG) microscopy. This technique successfully mapped out the mesoscopic morphology, microscopic geometry, symmetry, and ultrafast dynamics of an LSA formed by β-cyclodextrin (β-CD) and sodium dodecyl sulfate (SDS). The spatial imaging also revealed correlations between these different physical properties. Such knowledge shed light on the functions and mechanical properties of LSAs. In this Feature Article, we briefly introduce the fundamental principles of the VSFG microscope and then discuss the in-depth molecular physics of the LSAs revealed by this imaging technique. The application of the VSFG microscope to the artificial LSAs also paved the way for an alternative approach to studying the structure-dynamic-function relationships of protein assemblies, which were essential for life and difficult to study because of their various and complicated interactions. We expect that the hyperspectral VSFG microscope could be broadly applied to many noncentrosymmetric soft materials.

Revealing local molecular distribution, orientation, phase separation, and formation of domains in artificial lipid layers: Towards comprehensive characterization of biological membranes

Lipids, together with molecules such as DNA and proteins, are one of the most relevant systems responsible for the existence of life. Selected lipids are able to assembly into various organized structures, such as lipid membranes. The unique properties of lipid membranes determine their complex functions, not only to separate biological environments, but also to participate in regulatory functions, absorption of nutrients, cell-cell communication, endocytosis, cell signaling, and many others. Despite numerous scientific efforts, still little is known about the reason underlying the variability within lipid membranes, and its biochemical significance. In this review, we discuss the structural complexity of lipid membranes, as well as the importance to simplify studied systems in order to understand phenomena occurring in natural, complex membranes. Such systems require a model interface to be analyzed. Therefore, here we focused on analytical studies of artificial systems at various interfaces. The molecular structure of lipid membranes, specifically the nanometric thickens of molecular bilayer, limits in a major extent the choice of highly sensitive methods suitable to study such structures. Therefore, we focused on methods that combine high sensitivity, and/or chemical selectivity, and/or nanometric spatial resolution, such as atomic force microscopy, nanospectroscopy (tip-enhanced Raman spectroscopy, infrared nanospectroscopy), phase modulation infrared reflection-absorption spectroscopy, sum-frequency generation spectroscopy. We summarized experimental and theoretical approaches providing information about molecular structure and composition, lipid spatial distribution (phase separation), organization (domain shape, molecular orientation) of lipid membranes, and real-time visualization of the influence of various molecules (proteins, drugs) on their integrity. An integral part of this review discusses the latest achievements in the field of lipid layer-based biosensors.

Electrostatics Trigger Interfacial Self-Assembly of Bacterial Ice Nucleators

Ice active bacteria can catalyze water freezing at high subzero temperatures using ice nucleating proteins (INPs) located at their outer cell walls. INPs are the most effective ice nucleators known and are of significant interest for agriculture, climate research, and freeze/antifreeze technologies. The aggregation of INPs into large ice nucleation sites is a key step for effective ice nucleation. It has been proposed that ice active bacteria can drive the aggregation of INPs and thereby trigger ice nucleation. However, the mechanism of INP aggregate assembly and the molecular processes behind the activation are still unclear. Both biochemical pathways and activation through electrostatics have been proposed based on experiments with lysed ice active bacteria. For a more direct view on the assembly of INPs, we follow the structure and water interactions of a synthetic model INP of the well-studied ice bacterium Pseudomonas syringae at the air-water interface as a function of the subphase pH. By combining sum frequency generation spectroscopy with two-dimensional infrared spectra, we conclude that self-assembly and electrostatic interactions drive the formation of ordered INP structures capable of aligning interfacial water.

Investigation of the Atmospheric Moisture Effect on the Molecular Behavior of an Isocyanate-Based Primer Surface

A primer coating is engineered to facilitate compatibility between products like adhesives, sealants, and potting compounds and targeted substrates. Prolonged exposure of isocyanate-based primer surfaces to the environment is known to negatively affect the interfacial adhesion between itself and the products subsequently applied on top of it. However, the molecular behavior behind this observed phenomenon remained to be further investigated. In this study, sum frequency generation (SFG) vibrational spectroscopy, a nonlinear optical spectroscopic technique, was applied to study the surface of an isocyanate-based primer exposed to different environments at the molecular level. Atmospheric moisture was considered to be a potential factor in impairing the adhesion performance of the primer, and thus, time- and humidity-dependent experiments were executed to monitor the molecular behavior at the primer surface using SFG. In addition, 180° peel testing experiments were conducted to measure the adhesion properties of primers after being exposed to the corresponding conditions to correlate to SFG results and establish a chemical structure-macroscopic performance relationship. This study on the changes at the primer surface in different environments with varied humidity levels as a function of time aims to provide an in-depth understanding of the moisture effect on isocyanate-based primers. These learnings may also be helpful toward exploring a broader range of coatings and surface layers and improving customer product use guidelines.

A liquid surface height controller for surface spectroscopy

We present a simple and inexpensive liquid surface height controller that can monitor and maintain the height of a liquid surface in a surface-sensitive experiment. The system is based on a commercial laser pointer, universal serial bus webcam, syringe pump, and homemade control software. The system can sense changes in the height of the surface of ±1 µm, and the maximum range of the device without readjustment is around 2.5 mm. The intended use of the device is to maintain the height of a sample at the air-water interface in a sum-frequency generation spectroscopy measurement, which constantly changes due to water evaporation. A demonstration of the system maintaining the height of a water surface to a tolerance of ±5 µm over a period of 8 h is shown to illustrate the stability of a system controlled by this device.

Total Synthesis of Natural Products Containing Enamine or Enol Ether Derivatives

Enamine and enol ethers are nucleophilic functional groups that are well known to most chemists. When enamine or enol ethers are present in natural products, they are nearly exclusively found as derivatives having a direct connection to electron-withdrawing groups for stabilization, and the resulting larger entities, such as enamides or enol acylates, can be further extended or modified in the framework of natural products. The restricted conformational space that is associated with even simple enamine and enol ether derivatives can be a strong determinant of the overall molecular structure, and the more polarized derivatives can endow some natural products with electrophilic properties and thus facilitate covalent interactions with biological targets.In this Account, I describe our efforts (published since 2016) to prepare natural products from several different classes that all feature enamine or enol ether derivatives as key functionalities. Our choice of targets has been guided by a desire to illuminate unknown biological mechanisms associated with the compounds or, alternatively, to improve upon known biological activities that appear to be promising from a biomedical perspective. In the present text, however, the exclusive focus will be on the syntheses.First, I will discuss the basic properties of the functional groups and briefly present a small collection of illustrative and inspirational examples from the literature for their construction in different complex settings. Next, I will provide an overview of our work on the macrocyclic APD-CLD natural products, rakicidin A and BE-43547A₁, involving the development of an efficient macrocyclization strategy and the development of methods to construct the hallmark APD group: a modified enamide. The synthesis of the meroterpenoid strongylophorine-26 is discussed next, where we developed an oxidative quinone methoxylation to build a vinylogous ester group in the final step of the synthesis and employed FeCl₃-mediated cascade reactions for the rapid assembly of the overall scaffold to enable a short semisynthesis from isocupressic acid. An efficient core scaffold assembly was also in focus in our synthesis of the alkaloid streptazone A with the signature enaminone system being assembled through a rhodium-catalyzed Pauson-Khand reaction. Sequential, site-selective redox manipulations were developed to arrive at strepatzone A and additional members of the natural product family. Finally, I discuss our work to prepare analogs of complex polyether ionophores featuring functionalized tetronic acids as cation-binding groups. A method for the construction of a suitably protected chloromethylidene-modified tetronate is presented which enabled its installation in the full structure through a C-acylation reaction. This work exemplifies how components of abundant polyether ionophores can be recycled and used to access new structures which may possess enhanced biological activities.

Expanding the antibacterial selectivity of polyether ionophore antibiotics through diversity-focused semisynthesis

Polyether ionophores are complex natural products capable of transporting cations across biological membranes. Many polyether ionophores possess potent antimicrobial activity and a few selected compounds have ability to target aggressive cancer cells. Nevertheless, ionophore function is believed to be associated with idiosyncratic cellu-lar toxicity and, consequently, human clinical development has not been pursued. Here, we demonstrate that structurally novel polyether ionophores can be efficiently constructed by recycling components of highly abundant polyethers to afford analogues with enhanced anti-bacterial selectivity compared to a panel of natural polyether ionophores. We used classic degradation reactions of the natural polyethers lasalocid and monensin and combined the resulting fragments with building blocks provided by total synthesis, including halogen-functionalized tetronic acids as cation-binding groups. Our results suggest that structural optimization of polyether ionophores is possible and that this area represents a potential opportunity for future methodological innovation.

Orientation and Conformation of Proteins at the Air-Water Interface Determined from Integrative Molecular Dynamics Simulations and Sum Frequency Generation Spectroscopy

Understanding the assembly of proteins at the air-water interface (AWI) informs the formation of protein films, emulsion properties, and protein aggregation. Determination of protein conformation and orientation at an interface is difficult to resolve with a single experimental or simulation technique alone. To date, the interfacial structure of even one of the most widely studied proteins, lysozyme, at the AWI remains unresolved. In this study, molecular dynamics (MD) simulations are used to determine if the protein adopts a side-on, head-on, or axial orientation at the AWI with two different forcefields, GROMOS-53a6 + SPC/E and a99SB-disp + TIP4P-D. Vibrational sum frequency generation (SFG) spectroscopy experiments and spectral SFG calculations validate consistency between the structure determined from MD and experiments. Overall, we show with strong agreement that lysozyme adopts an axial conformation at pH 7. Further, we provide molecular-level insight as to how pH influences the binding domains of lysozyme resulting in side-on adsorption near the isoelectric point of the lysozyme.