Gravitational Effect on the Advancing and Receding Angles of a Two-Dimensional Cassie-Baxter Droplet on a Textured Surface

Development of Adjustable High- to Low-Adhesive Superhydrophobicity Using Aligned Electrospun Fibers

Superhydrophobic surfaces based on electrospun fibrous structures exhibit advantages of additive manufacturing and enable the passage of gases. Compared to randomly deposited fibers, directionally aligned fibers improve the control of surface wetting by a specified fiber orientation and predictable liquid-fiber contact interface. In this article, we create superhydrophobicity with adjustable adhesion based on the understanding of droplet wetting behavior on directionally aligned fibers. Directionally aligned polystyrene fibers with different diameters and interfiber distances (l) are produced using electrospinning with a rotating fin collector. The wetting behavior of droplets on the surfaces dressed by aligned fibers is characterized, and a thermodynamic model of wetting behavior is established to guide the experimental studies. As a result, high-adhesive superhydrophobicity is achieved on weak hydrophobic substrate surfaces dressed by aligned polystyrene fibers with a diameter of 1.8 μm and l between 5 and 130 μm. Water droplets (2 μL) exhibit a maximum contact angle of 156° and adhere to the fiber-dressed surfaces by tilting upside down. Low-adhesive superhydrophobicity is achieved by introducing an additional layer of aligned fibers to increase the transition energy barrier. On the dual-layer structure with an upper-layer l of 9 μm, droplets show a contact angle of 155° and can readily roll off the surface. Moreover, increasing the upper-layer l to 15 μm reserves the surface to high-adhesive superhydrophobicity.

Robust and durable liquid-repellent surfaces

This review provides a comprehensive summary of characterization, design, fabrication, and application of robust and durable liquid-repellent surfaces.

How and When the Cassie-Baxter Droplet Starts to Slide on Textured Surfaces

A theoretical analysis of the sliding of a Cassie-Baxter droplet on a microstructured surface is conducted. The conventional theory based on the force balance has been frequently used to predict the sliding condition of the droplet; however, the sliding condition cannot be precisely determined because the theory requires the available ranges of the contact angles at the rear and front ends of the droplet. In this study, by calculating the droplet shape and examining the stability of a droplet at every possible pinning point, we propose a new theoretical model that can predict the sliding condition of a two-dimensional (2D) Cassie-Baxter droplet without any a priori measurement but using only the surface information. With the proposed theory, we answer two open questions in sliding research: (i) whether the sliding initiates with front end slip or rear end slip and (ii) whether the advancing and receding contact angles measured on the horizontal surface are comparable with the front and rear contact angles of the droplet at the onset of sliding. Additionally, a new droplet translation motion mechanism promoted by a cycle of condensation and evaporation is suggested, which can be further utilized for precise droplet transportation. Finally, the theoretical results are validated against the 2D line-tension-based front-tracking method (LTM), which can seamlessly capture the attachment and detachment between the droplet and the textured surface.