Cascade Reactions in Chain-Growth Polymerization

Fast and Selective Main-Chain Scission of Vinyl Polymers Using the Domino Reaction in the Alternating Sequence for Transesterification

This communication reports on vinyl polymers capable of selective and fast main-chain scission (MCS). The trick is the domino reaction in an alternating sequence of methyl 2-(trimethylsiloxymethyl)acrylate and 5,6-benzo-2-methylene-1,3-dioxepane, a cyclic ketene acetal for radical ring-opening polymerization. Removal of the trimethylsilyl group using Bu4N+·F- readily led to MCS via irreversible transesterification of the ester backbone, affording a five-membered lactone fragment. The molar mass decreased drastically within 5 min, and no side reactions were observed. Control experiments suggest that the formation of a five-membered ring via a domino reaction is critical for fast and selective MCS. The terpolymers with methyl methacrylate and styrene also exhibited a large decrease in molar mass within 5 min. In addition, MCS was also observed for the heterogeneous reaction system in acidic aqueous media; treatment of the binary copolymer in a 50 wt % acetic acid solution resulted in a significant decrease in molar mass after 30 min. These results suggest efficient construction of degradable sites using a binary monomer system corresponding to the pendant trigger and ester backbone. Because this molecular design using a binary monomer system provides selective and fast MCS for terpolymers containing other vinyl monomers, it can provide various degradable vinyl polymers.

Designing Degradable Polymers from Tricycloalkenes via Complete Cascade Metathesis Polymerization

Cascade metathesis polymerization has been developed as a promising method to synthesize complex but well-defined polymers from monomers containing multiple reactive functional groups. However, this approach has been limited to the monomers involving simple alkene/alkyne moieties or produced mainly non-degradable polymers. In this study, we demonstrate a complete cascade ring-opening/ring-closing metathesis polymerization (RORCMP) using various tricycloalkenes and two strategies for the efficient degradation. Through rational design of tricycloalkene monomers, the structure and reactivity relationship was explored. For example, tricycloalkenes with trans configuration in the central ring enabled faster and better selective cascade RORCMP than the corresponding cis isomers. Also, a 4-substituted cyclopentene moiety in the monomers significantly enhanced the overall cascade RORCMP performance, with the maximum turnover number (TON) reaching almost 10,000 and molecular weight up to 170 kg/mol using an amide-containing monomer. Furthermore, we achieved one-shot cascade multiple olefin metathesis polymerization using tricycloalkenes and a diacrylate, to produce new highly A,B-alternating copolymers with full degradability. Lastly, we successfully designed xylose-based tricycloalkenes to give well-defined polymers that underwent ultra-fast and complete degradation under mild conditions.

Controlled Ring-Opening Polymerization of Macrocyclic Monomers Based on Ring-Opening/Ring-Closing Cascade Reaction

The development of a controlled ring-opening polymerization (ROP) method for synthesizing backbone-functionalized and sequence-controlled polymers with well-defined architectures from macrocyclic monomers is highly desirable in polymer chemistry. Herein, we developed a novel general controlled ROP of macrocycles for producing backbone functional and sequence-controlled polyurethanes and polyamides with controlled molecular weights and narrow dispersities (Đ < 1.1). The key to this method is the introduction of a trimethyl lock unit, an efficient cyclization-based self-immolative spacer, into the macrocyclic monomer ring as a "ring-opening trigger." ROP is initiated by the attack of a primary amine nucleophile on the ring-activated carbonate/ester group, leading to the ring opening of the macrocyclic monomer. Subsequently, spontaneous 6-exo-trig cyclization of the trimethyl lock unit occurs, detaching this ring-opening trigger and regenerating the primary amine end group. The regenerated primary amine group can then be used to propagate the polymer chain by iterating the ring-opening-ring-closing cascade reaction. The versatile ROP method can be applied in the synthesis of water-soluble polyurethanes, backbone-degradable polyurethanes and poly(ester amide)s, and sequence-controlled poly(amino acid)s with well-defined macromolecular architectures.

A Strategy for Controlling the Polymerizations of Thiyl Radical Propagation by RAFT Agents

The ability to extend the polymerizations of thiyl radical propagation to be regulated by existing controlled methods would be highly desirable, yet remained very challenging to achieve because the thiyl radicals still cannot be reversibly controlled by these methods. In this article, we reported a novel strategy that could enable the radical ring-opening polymerization of macrocyclic allylic sulfides, wherein propagating specie is thiyl radical, to be controlled by reversible addition-fragmentation chain transfer (RAFT) agents. The key to the success of this strategy is the propagating thiyl radical can undergo desulfurization with isocyanide and generate a stabilized alkyl radical for reversible control. Systematic optimization of the reaction conditions allowed good control over the polymerization, leading to the formation of polymers with well-defined architectures, exemplified by the radical block copolymerization of macrocyclic allylic sulfides and vinyl monomers and the incorporation of sequence-defined segments into the polymer backbone. This work represents a significant step toward directly enabling the polymerizations of heteroatom-centered radical propagation to be regulated by existing reversible-deactivation radical polymerization techniques.

Controlled Living Cascade Polymerization of Polycyclic Enyne Monomers: Leveraging Complete Degradability for a Stereochemical and Structural Investigation

Cascade polymerizations recently gained significant attention due to their use of unique transformations, involving multiple bond making and/or breaking steps, when converting monomers to repeat units. However, designing complex cascade polymerizations which proceed in a controlled manner is very challenging. Various side reactions can hamper polymerization performance and the efficiency of the cascade. In this work, we explore a metathesis-based cascade polymerization of unique polycyclic enyne monomers, which contain a terminal alkyne and two cyclic alkenes. By modifying the monomer's stereochemistry, linkers, and ring types, we were able to modulate the polymerization performance and the extent to which a complete cascade reaction occurs. Upon subjecting the resulting polymers to mild acidic conditions and analyzing the degradation products, we were able to calculate the percentage of repeat units derived from a complete cascade reaction (termed the cascade efficiency). In addition to identifying how various structural parameters in the monomer influence the success of a cascade polymerization, we were able to achieve controlled living cascade polymerizations of multiple monomers with >99% cascade efficiency and produce various block copolymers.

Degradable Vinyl Random Copolymers via Photocontrolled Radical Ring-Opening Cascade Copolymerization

Degradable vinyl polymers by radical ring-opening polymerization are promising solutions to the challenges caused by non-degradable vinyl plastics. However, achieving even distributions of labile functional groups in the backbone of degradable vinyl polymers remains challenging. Herein, we report a photocatalytic approach to degradable vinyl random copolymers via radical ring-opening cascade copolymerization (rROCCP). The rROCCP of macrocyclic allylic sulfones and acrylates or acrylamides mediated by visible light at ambient temperature achieved near-unity comonomer reactivity ratios over the entire range of the feed compositions. Experimental and computational evidence revealed an unusual reversible inhibition of chain propagation by in situ generated sulfur dioxide (SO2), which was successfully overcome by reducing the solubility of SO2. This study provides a powerful approach to degradable vinyl random copolymers with comparable material properties to non-degradable vinyl polymers.

Cation Template-Assisted RAFT Cyclopolymerization of Hexa(Ethylene Glycol) Di(meth)acrylates to Thermoresponsive Pseudo-Crown Ether Polymers

Cation template-assisted reversible addition fragmentation/chain transfer (RAFT) cyclopolymerization of hexa(ethylene glycol) diacrylate (PEG6DA) or hexa(ethylene glycol) dimethacrylate (PEG6DMA) is developed as a versatile system to produce large in-chain ring cyclopolymers, thermoresponsive pseudo-crown ether polymers. For an efficient synthesis, potassium hexafluorophosphate (KPF₆ ) is employed as a cation template; PEG6DA as well as PEG6DMA recognizes the potassium cation with the hexa(ethylene glycol) spacer to dynamically form a pseudo-cyclic divinyl monomer. Those monomers interacting with the potassium cations are efficiently polymerized with RAFT agents and radical initiators into cyclopolymers comprising 24-membered hexa(ethylene glycol) rings. The cation template-assisted RAFT cyclopolymerization is also effective for the synthesis of amphiphilic random cyclocopolymers bearing hydrophilic hexa(ethylene glycol) rings and hydrophobic butyl groups. Cyclopolymers of PEG6DA and PEG6DMA further show thermoresponsive solubility in water. The cloud point temperature of cyclopoly(PEG6DA)s is higher than that of a cyclopoly(PEG6DMA).

Recent progress in the construction of polymers with advanced chain structures via hybrid, switchable, and cascade chain-growth polymerizations

Recent progress of hybrid, switchable, and cascade chain-growth polymerizations for the preparation of polymers with advanced chain structures with diverse compositions has been summarized.

Direct formation of nano-objects via in situ self-assembly of conjugated polymers

The development of the polymer self-assembly method “in situ nanoparticlization of conjugated polymers” is discussed in this Perspective.

100th Anniversary of Macromolecular Science Viewpoint: Degradable Polymers from Radical Ring-Opening Polymerization: Latest Advances, New Directions, and Ongoing Challenges

Radical ring-opening polymerization (rROP) allows facile incorporation of labile groups (e.g., ester) into the main chain of vinyl polymers to obtain (bio)degradable materials. rROP has focused a lot of attention especially since the advent of reversible deactivation radical polymerization (RDRP) techniques and is still incredibly moving forward, as attested by the numerous achievements in terms of monomer synthesis, macromolecular engineering, and potential biomedical applications of the resulting degradable polymers. In the present Viewpoint, we will cover the latest progress made in rROP in the last ∼5 years, such as its recent directions, its remaining limitations, and the ongoing challenges. More specifically, this will be achieved through the three different classes of monomers that recently caught most of the attention: cyclic ketene acetals (CKA), thionolactones, and macrocyclic monomers.

Sugar-Based Polymers from d-Xylose: Living Cascade Polymerization, Tunable Degradation, and Small Molecule Release

Enyne monomers derived from D-xylose underwent living cascade polymerizations to prepare new polymers with a ring-opened sugar and degradable linkage incorporated into every repeat unit of the backbone. Polymerizations were well-controlled and had living character, which enabled the preparation of high molecular weight polymers with narrow molecular weight dispersity values and a block copolymer. By tuning the type of acid-sensitive linkage (hemi-aminal ether, acetal, or ether functional groups), we could change the degradation profile of the polymer and the identity of the resulting degradation products. For instance, the large difference in degradation rates between hemi-aminal ether and ether-based polymers enabled the sequential degradation of a block copolymer. Furthermore, we exploited the generation of furan-based degradation products, from an acetal-based polymer, to achieve the release of covalently bound reporter molecules upon degradation.