Reversible Changes in the Grain Structure and Conductivity in a Block Copolymer Electrolyte

Ultrathin, Mechanically Robust Quasi-Solid Composite Electrolyte for Solid-State Lithium Metal Batteries

Herein, we present the preparation and properties of an ultrathin, mechanically robust, quasi-solid composite electrolyte (SEO-QSCE) for solid-state lithium metal battery (SLB) from a well-defined polystyrene-b-poly(ethylene oxide) diblock copolymer (SEO), Li6.75La3Zr1.75Ta0.25O12 nanofiller, and fluoroethylene carbonate plasticizer. Compared with the ordered lamellar microphase separation of SEO, the SEO-QSCE displays bicontinuous phases, consisting of a Li+ ion conductive poly(ethylene oxide) domain and a mechanically robust framework of the polystyrene domain. Therefore, the 12 μm-thick SEO-QSCE membrane exhibits an exceptional ionic conductivity of 1.3 × 10-3 S cm-1 at 30 °C, along with a remarkable tensile strength of 5.1 MPa and an elastic modulus of 2.7 GPa. The high mechanical robustness and the self-generated LiF-rich SEI enable the SEO-QSCE to have an extraordinary lithium dendrite prohibition effect. The SLB of Li|SEO-QSCE|LiFePO4 reveals superior cycling performances at 30 °C for over 600 cycles, maintaining an initial discharge capacity of 145 mAh g-1 and a remarkable capacity retention of 81% (117 mAh g-1) after 400 cycles at 0.5 C. The high-voltage SLB of Li|SEO-QSCE|LiNi0.5Co0.3Mn0.2O2 displays good cycling stability for over 150 cycles at 30 °C. Moreover, the exceptional robustness of SEO-QSCE enables the high-voltage solid-state pouch cell of Li|SEO-QSCE|LiNi0.5Co0.3Mn0.2O2 with high flexibility and excellent safety features. The current investigation delivers a promising and innovative approach for preparing quasi-solid electrolytes with features of ultrathin design, mechanical robustness, and exceptional electrochemical performance for high-voltage SLBs.

Single-Ion-Conducting Hydrogel Electrolytes Based on Slide-Ring Pseudo-Polyrotaxane for Ultralong-Cycling Flexible Zinc-Ion Batteries

Flexible zinc-ion batteries (ZIBs) with high capacity and long cycle stability are essential for wearable electronic devices. Hydrogel electrolytes have been developed to provide ion-transfer channels while maintaining the integrity of ZIBs under mechanical strain. However, hydrogel matrices are typically swollen with aqueous salt solutions to increase ionic conductivity, which can hinder intimate contact with electrodes and reduce mechanical properties. To address this, a single-Zn-ion-conducting hydrogel electrolyte (SIHE) is developed by integrating polyacrylamide network and pseudo-polyrotaxane structure. The SIHE exhibits a high Zn2+ transference number of 0.923 and a high ionic conductivity of 22.4 mS cm-1 at room temperature. Symmetric batteries with SIHE demonstrate stable Zn plating/stripping performance for over 160 h, with a homogenous and smooth Zn deposition layer. Full cells with La-V2 O5 cathodes exhibit a high capacity of 439 mA h g-1 at 0.1 A g-1 and excellent capacity retention of 90.2% after 3500 cycles at 5 A g-1 . Moreover, the flexible ZIBs display stable electrochemical performance under harsh conditions, such as bending, cutting, puncturing, and soaking. This work provides a simple design strategy for single-ion-conducting hydrogel electrolytes, which could pave the way for long-life aqueous batteries.

Improved Solid Electrolyte Conductivity via Macromolecular Self-Assembly: From Linear to Star Comb-like P(S-co-BzMA)-b-POEGA Block Copolymers

Star block copolymer electrolytes with a lithium-ion conducting phase are investigated in the present work to assess the influence of this complex architecture compared to that of the linear one, on both, bulk morphology and ionic conductivity. For that purpose, the controlled synthesis of a series of poly(styrene-co-benzyl methacrylate)-b-poly[oligo(ethylene glycol) methyl ether acrylate] [P(S-co-BzMA)-b-POEGA] block copolymers (BCPs) by reversible addition-fragmentation transfer polymerization was performed from either a monofunctional or a tetrafunctional chain transfer agent containing trithiocarbonate groups. We emphasized how a small amount of styrene (6 mol %) drastically improved the control of the RAFT polymerization of benzyl methacrylate mediated by the tetrafunctional chain transfer agent. Transmission electron microscopy and small-angle X-ray scattering demonstrated a clear segregation of the BCPs in the presence of lithium salt. Interestingly, the star BCPs gave rise to highly ordered lamellar structures as compared to that of the linear analogues. Consequently, the reduced lamellae tortuosity of self-assembled star BCPs improved the lithium conductivity by more than 8 times at 30 °C for ∼30 wt % of the POEGA conductive phase.

Block copolymers as (single-ion conducting) lithium battery electrolytes

Solid-state batteries are considered the next big step towards the realization of intrinsically safer high-energy lithium batteries for the steadily increasing implementation of this technology in electronic devices and particularly, electric vehicles. However, so far only electrolytes based on poly(ethylene oxide) have been successfully commercialized despite their limited stability towards oxidation and low ionic conductivity at room temperature. Block copolymer (BCP) electrolytes are believed to provide significant advantages thanks to their tailorable properties. Thus, research activities in this field have been continuously expanding in recent years with great progress to enhance their performance and deepen the understanding towards the interplay between their chemistry, structure, electrochemical properties, and charge transport mechanism. Herein, we review this progress with a specific focus on the block-copolymer nanostructure and ionic conductivity, the latest works, as well as the early studies that are fr"equently overlooked by researchers newly entering this field. Moreover, we discuss the impact of adding a lithium salt in comparison to single-ion conducting BCP electrolytes along with the encouraging features of these materials and the remaining challenges that are yet to be solved.

Crystallization Induced Self-Assembly: A Strategy to Achieve Ultra-Small Domain Sizes

Achieving self-assembled nanostructures with ultra-small feature sizes (e. g., below 5 nm) is an important prerequisite for the development of block copolymer lithography. In this work, the preparation and self-assembly of a series of giant molecules composed of vinyl polyhedral oligomeric silsesquioxane (VPOSS) tethered with monodispersed oligo(L-lactide) chains are presented. Small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM) results demonstrate that ultra-small domain sizes (down to 3 nm) of phase separated lamellar morphology are achieved in bulk, driven by the strong tendency and fast kinetics for crystallization of VPOSS moieties. Moreover, upon gamma ray radiation, VPOSS cages in the lamellar structure can be crosslinked via polymerization of the vinyl groups. After pyrolysis at high temperature, ultra-thin two-dimensional nano-silica sheets can be obtained.

100th Anniversary of Macromolecular Science Viewpoint: Block Copolymers with Tethered Acid Groups: Challenges and Opportunities

Scientific research on advanced polymer electrolytes has led to the emergence of all-solid-state energy storage/transfer systems. Early research began with acid-tethered polymers half a century ago, and research interest has gradually shifted to high-precision polymers with controllable acid functional groups and nanoscale morphologies. Consequently, various self-assembled acid-tethered block polymer morphologies have been produced. Their ion properties are profoundly affected by the multiscale intermolecular interactions in confinements. The creation of hierarchically organized ion/dipole arrangements inside the block copolymer nanostructures has been highlighted as a future method for developing advanced single-ion polymers with decoupled ion dynamics and polymer chain relaxation. Several emerging practical applications of the acid-tethered block copolymers have been explored to draw attention to the challenges and opportunities in developing state-of-the-art electrochemical systems.