Organocatalysis: A Paradigm Shift in the Synthesis of Aliphatic Polyesters and Polycarbonates

Amino acids as bio-organocatalysts in ring-opening copolymerization for eco-friendly synthesis of biobased oligomers from vegetable oils

Herein, we present an innovative synthetic approach for producing a diverse set of biobased oligomers. This method begins with olive oil and employs a wide variety of commercially available amino acids (AAs) as bio-organocatalysts, in addition to tetrabutylammonium iodide (TBAI) as a cocatalyst, to synthesize various biobased oligomers. These biobased oligomers were strategically prepared starting from epoxidized olive oil (EOO) and a variety of cyclic anhydrides (phthalic, PA; maleic, MA; succinic, SA; and glutaric, GA). Among the amino acids tested as bio-organocatalysts, L-glutamic acid (L-Glu) showed the best performance for the synthesis of both poly(EOO-co-PA) and poly(EOO-co-MA), exhibiting 100% conversion at 80 °C in 2 hours, whereas the formation of poly(EOO-co-SA) and poly(EOO-co-GA) required more extreme reaction conditions (72 hours under toluene reflux conditions). Likewise, we have succeeded in obtaining the trans isomer exclusively for the MA based-oligomer within the same synthetic framework. The obtained oligomers were extensively characterized using techniques including NMR, FT-IR, GPC and TGA. A series of computational simulations based on density functional theory (DFT) and post-Hartree Fock (post-HF) methods were performed to corroborate our experimental findings and to obtain an understanding of the reaction mechanisms.

Creating Remarkably Moisture- and Air-Stable Macromolecular Lewis Acid by Integrating Borane within the Polymer Chain: A Highly Active Catalyst for Homo(co)polymerization of Epoxides

Borane-based Lewis acids (LA) play an indispensable role in the Lewis pair (LP) mediated polymerization. However, most borane-based LPs are moisture- and air-sensitive. Therefore, development of moisture and air-stable borane-based LP is highly desirable. To achieve this goal, the concept of "aggregation induced enlargement effects" by chemically linking multiple borane within a nanoscopic confinement was conceived to create macromolecular LA. Accordingly, an extremely moisture and air stable macromolecular borane, namely, PVP-1B featuring poly(4-vinylphenol) backbone, was constructed. The concentration of borane active site is greatly higher than average concentration due to local confinement. Therefore, an enhanced activity was observed. Moreover, the local LA aggregation effects allow its tolerance to air and large amount of chain transfer agent. Consequently, PVP-1B showed remarkable efficiency for propylene oxide (PO) polymerization at 25 °C (TOF=27900 h-1 ). Furthermore, it enables generation of well-defined telechelic poly (CHO-alt-CO2 ) diol (0.6-15.3 kg/mol) with narrow Đs via copolymerizing cyclohexene oxide and CO2 at 80 °C. This work indicates unifying multiple borane within a polymer in a macromolecular level shows superior catalytic performance than constructing binary, bi(multi)functional systems in a molecular level. This paves a new way to make functional polyethers.

Organocatalyzed ring-opening reactions of γ-carbonyl-substituted ε-caprolactones

Side-chain-functionalized aliphatic polyesters are promising as functional biodegradable polymers. We have investigated ring-opening reactions of γ-carbonyl-substituted ε-caprolactones (gCCLs) to obtain poly(ε-caprolactone) (PCL) analogues. Organic catalysts and Sn(Oct)2 often used for the ring-opening polymerization (ROP) of ε-caprolactone (CL) have been explored to find the conditions for the formation of polymeric products of gCCLs. We confirmed the consumption of gCCLs in all catalyzed reactions. However, chain propagation hardly occurs, as the propagating species are preferentially transformed to α-substituted five-membered lactones when the substituents are linked by ester or not sterically hindered. Intramolecular cyclization to form thermodynamically stable five-membered lactones releases alcohols and amines, serving as nucleophiles for the subsequent ring opening of other gCCLs. Thus, apparent chain reactions are realized for continuous consumption of gCCLs. The reaction preference remains unchanged independent of the catalysts, although the reactions of the amide-linked gCCLs by acidic catalysts are slightly mitigated. Finally, copolymerization of CL and a gCCL catalyzed by diphenyl phosphate has been investigated, which enables the chain propagation reaction to yield the linear oligomers of PCL analogues containing up to 16 mol% of gCCL units. This study contributes to understanding the chemistry of ring-opening reactions of substituted lactones for designing functional degradable polymers.

Approach to Circular Chemistry Preparing New Polyesters from Olive Oil

The transformation of cooking oils and their waste into polyesters is a challenge for circular chemistry. Herein, we have used epoxidized olive oil (EOO), obtained from cooking olive oil (COO), and various cyclic anhydrides (such as phthalic anhydride PA, maleic anhydride MA, and succinic anhydride SA) as raw materials for the preparation of new bio-based polyesters. For the synthesis of these materials, we have used the bis(guanidine) organocatalyst 1 and tetrabutylammonium iodide (Bu₄NI) as cocatalyst. The optimal reaction conditions for the preparation of poly(EOO-co-PA) and poly(EOO-co-MA) were 80 °C for 5 h using toluene as solvent; however, the synthesis of poly(EOO-co-SA) required more extreme reaction conditions. Furthermore, we have exclusively succeeded in obtaining the trans isomer for MA-polyester. The obtained biopolyesters were characterized by NMR, Fourier transform infrared, thermogravimetric analysis, and scanning electron microscopy analyses. Since there are few examples of functionalized and defined compounds based on olive oil, it is innovative and challenging to transform these natural-based compounds into products with high added value.

A Biodegradable, Polymer-Supported Oxygen Atom Transfer Reagent

Biodegradable polymers are desirable to mitigate the environmental impact of plastic waste in the environment. Over the past several decades, the development of organocatalytic ring-opening polymerization (OROP) has made the synthesis of many new types of biodegradable polymers possible. In this research article, the first example of an oxygen atom transfer reagent pendant on a biodegradable polymer backbone is reported. The monomers for the polycarbonate backbone are sourced from the biodegradable 2,2-bis(hydroxymethyl) propionic acid molecule, and an iodoaryl group is installed pendant to the cyclic monomer for post-polymerization modification into an iodosylaryl oxygen atom transfer reagent. The key I-O bond is characterized by XPS spectroscopy, and a test reaction to triphenylphosphine demonstrates the ability of the polymer to engage in an oxygen atom transfer reaction with a substrate.

Crystallization of Star-Shaped Poly(l-lactide)s with Arm Chains Aligned in the Same Direction in Two-Dimensional Crystals in a Langmuir Monolayer

Polylactide (PLA) crystallizes to form extended-chain crystals in a Langmuir monolayer because crystallization is accelerated on the water surface. This is a unique situation where chain packing can be analyzed by simply measuring the lamellar thickness. Herein, star-shaped poly(l-lactide)s (PLLAs) with 2-12 arms were synthesized through the polymerization of l-lactide with various polyols as initiators, and their crystallization behavior in a monolayer was studied via atomic force microscopy. The PLLAs comprising 2-4 arms crystallized with all arms aligned in the same direction and being folded at the central polyol unit. Meanwhile, the PLLAs comprising 6 and 12 arms crystallized with both halves of the arms extended from the center to the opposite directions, most likely due to the steric hindrance of the crowded arms. Considering that the PLLAs crystallized from a once-formed condensed amorphous state during compression, they have a strong tendency to crystallize with the arms aligned in the same direction. The crystallization rate of star-shaped PLAs is known to reduce compared with that of a linear PLA even if the number of arms is as few as 2. This should be closely related to the unique crystallization behavior of the star-shaped PLLAs with the arms aligned in the same direction.

Catalytic behavior of a ZnO/TiO2 composite in the synthesis of polycarbonate diol

ZnO/TiO2 catalysts with different ZnO contents have been prepared through equal volume impregnation method, characterized by XRD, SEM, Py-IR, ICP, XPS, NH3-TPD and N2 adsorption/desorption, and evaluated in the synthesis of polycarbonate diol (PCDL) through transesterification. The results showed that titanium zinc oxide formed in these catalysts, and the content of acidic sites varied with the ZnO content, and ZnO/TiO2 (10%) has the highest acid amount. The ZnO/TiO2 (20%) with medium acidic sites showed the highest catalytic activity. The synthesis process of polycarbonate glycol was also optimized. Under the optimal reaction conditions, the yield of PCDL was 72.5%, and the M n reached 4829 g mol-1 with a PDI of 1.6.

Organocatalytic Ring-Opening Polymerization of ϵ-Caprolactone with Phosphoramidimidates (PADIs) as a Bifunctional Brønsted Acid Catalyst

In this study, an organocatalytic ring-opening polymerization (ROP) of ϵ-caprolactone (ϵ-CL) has been developed by employing PADIs as a novel and efficient acid/base bifunctional organocatalyst, which could afford metal-free poly(ϵ-caprolactone) with predictable molecular weight and narrow dispersity at a low catalyst loading under mild conditions. NMR and kinetic studies indicate that the ring-opening polymerizations of lactones catalyzed by PADIs proceed in a living and well controlled manner. Moreover, this organic Brønsted acid catalytic system could allow the synthesis of PCL with molecular weight above 60 kg/mol, as well as well-defined star polymers.

Biodegradable and biocompatible synthetic polymers for applications in bone and muscle tissue engineering

In medicine, tissue engineering has made significant advances. Using tissue engineering techniques, transplant treatments result in less donor site morbidity and need fewer surgeries overall. It is now possible to create cell-supporting scaffolds that degrade as new tissue grows on them, replacing them until complete body function is restored. Synthetic polymers have been a significant area of study for biodegradable scaffolds due to their ability to provide customizable biodegradable and mechanical features as well as a low immunogenic effect due to biocompatibility. The food and drug administration has given the biodegradable polymers widespread approval after they showed their reliability. In the context of tissue engineering, this paper aims to deliver an overview of the area of biodegradable and biocompatible synthetic polymers. Frequently used synthetic biodegradable polymers utilized in tissue scaffolding, scaffold specifications, polymer synthesis, degradation factors, as well as fabrication methods are discussed. In order to emphasize the many desired properties and corresponding needs for skeletal muscle and bone, particular examples of synthetic polymer scaffolds are investigated. Increased biocompatibility, functionality and clinical applications will be made possible by further studies into novel polymer and scaffold fabrication approaches.  

Introducing SuFEx click chemistry into aliphatic polycarbonates: a novel toolbox/platform for post-modification as biomaterials

As a biodegradable and biocompatible biomaterial, aliphatic polycarbonates (APCs) have attracted substantial attention in terms of post-polymerization modification (PPM) for functionalization. A strategy for the introduction of sulfur(VI)-fluoride exchange (SuFEx) click chemistry into APCs for PPM is proposed for the first time in this work. 4'-(Fluorosulfonyl)benzyl 5-methyl-2-oxo-1,3-dioxane-5-carboxylate (FMC) was designed as a SuFEx clickable cyclic carbonate for APCs via ring-opening polymerization (ROP), and an operational and nontoxic synthetic route was achieved. FMC managed to undergo both ROP and PPM through the SuFEx click chemistry organocatalytically without constraining or antagonizing each other, using 1,5,7-triazabicyclo[4,4,0]dec-5-ene (TBD) as a co-organocatalyst here. Its ROP was systematically investigated, and density functional theory (DFT) calculations were performed to understand the acid-base catalytic mechanism in the anionic ROP. Exploratory investigations into PPM by SuFEx of poly(FMC) were conducted as biomaterials, and the one-pot strategies to achieve both ROP and SuFEx were confirmed.

Preparing Well-Defined Polyacrylamide-b-Polycarbonate by Integrating Photoiniferter Polymerization and TBD-Catalyzed ROP

The dual-initiator technique allows the polymerization of different monomers from orthogonal polymerization mechanisms to obtain block copolymers (BCPs). In this study, it is attempted to combine photoiniferter living free radical polymerization and organocatalytic ring-opening polymerization (ROP) to design a hydroxyl-functionalized carbamodithioate, i.e., 4-(hydroxymethyl)benzyl diethylcarbamodithioate (HBDC), which can integrate photoiniferter polymerization of acrylamide monomers and ROP of cyclic carbonates. As a proof of concept, the monomer applicability is further extended to acrylates and lactones. The results confirm that the two polymerization systems are experimentally compatible in a stepwise sequence as well as in a simultaneous one-pot process to synthesize BCPs. It is reasonable to assume that HBDC can allow for simple and efficient one-pot access to well-defined BCPs from a larger range of monomers, which is more advantageous from the operational, economical, and environmental points of view.

Highly Active Heterogeneous Double Metal Cyanide Catalysts for Ring-Opening Polymerization of Cyclic Monomers

A series of heterogeneous Zn-Co double metal cyanide (DMC) catalysts were investigated for ring-opening polymerization (ROP) of various cyclic monomers. Notably, inexpensive and commonly used organic solvents such as acetone, N,N-dimethylacetamide, N,N-dimethylformamide, dimethyl sulfoxide, nitromethane, and 1-methylpyrrolidin-2-one were very effective complexing agents for the preparation of DMC catalysts, showing high catalytic activity for the ROP of propylene oxide, ε-caprolactone, and δ-valerolactone. The chemical structures and compositions of the resultant catalysts were determined using various techniques such as FT-IR, X-ray photoelectron spectroscopy, powder X-ray diffraction, and elemental analysis. α,ω-Hydroxyl-functionalized polyether and polyester polyols with high yields and tunable molecular weights were synthesized in the presence of various initiators to control functionality. Kinetic studies of the ROP of δ-valerolactone were also performed to confirm the reaction mechanism.

Ultrafast ring-opening copolymerization of lactide with glycolide toward random poly(lactic-co-glycolic acid) copolymers by organophosphazene base and urea binary catalysts

The preparation of poly(lactic-co-glycolic acid) (PLGA) copolymers with controllable random microstructures remains as a challenge due to the much higher reactivity of glycolide (GA) compared to lactide (LA). In this...

Organic carboxylate salt-enabled alternative synthetic routes for bio-functional cyclic carbonates and aliphatic polycarbonates

A cyclic carbonate with an ammonium carboxylate residue was found to serve as a nucleophile for esterification with alkyl bromides via the SN2 mechanism.

Controlling polymer stereochemistry in ring-opening polymerization: a decade of advances shaping the future of biodegradable polyesters

This review highlights recent developments in the field of biodegradable polymeric materials intended to replace non-degradable conventional plastics, focusing on studies from the last ten years involving the stereoselective ring-opening polymerization of cyclic esters. This encompasses exciting advances in both catalyst design and monomer scope. Notably, the last decade has seen the emergence of metal-free stereocontrolled ROP for instance, as well as the synthesis and stereocontrolled polymerization of new types of chiral monomers. This study will emphasize recent stereoselective polymerization catalysts and chiral monomers and will focus on stereocontrol quantification, the mechanisms of stereocontrol and their differentiation if reported and studied for a specific catalyst system.

Heterogeneous Double Metal Cyanide Catalyzed Synthesis of Poly(ε-caprolactone) Polyols for the Preparation of Thermoplastic Elastomers

A series of polycaprolactones (PCLs) with molecular weights of 950–10,100 g mol−1 and Ð of 1.10–1.87 have been synthesized via one-pot, solvent-free ring-opening polymerization (ROP) of ε-caprolactone (CL) using a heterogeneous double metal cyanide (DMC) catalyst. Various initiators, such as polypropylene glycol, ethylene glycol, propylene glycol, glycerol, and sorbitol, are employed to tune the number of hydroxyl end groups and properties of the resultant PCLs. Kinetic studies indicate that the DMC-catalyzed ROP of CL proceeds via a similar mechanism with the coordination polymerization. Branched PCLs copolymers are also synthesized via the DMC-catalyzed copolymerization of CL with glycidol. The α,ω-hydroxyl functionalized PCLs were successfully used as telechelic polymers to produce thermoplastic poly(ester-ester) and poly(ester-urethane) elastomers with well-balanced stress and strain properties.