Graft Copolymer Elastomers with Polar Polyacrylonitrile as Semicrystalline Side Chains: Excellent Toughness and Healability

Thermally Conductive Elastomer Composites with High Toughness, Softness, and Resilience Enabled by Regulating Interfacial Structure and Dynamics

The emerging applications of thermally conductive elastomer composites in modern electronic devices for heat dissipation require them to maintain both high toughness and resilience under thermomechanical stresses. However, such a combination of thermal conductivity and desired mechanical characteristics is extremely challenging to achieve in elastomer composites. Here this long-standing mismatch is resolved via regulating interfacial structure and dynamics response. This regulation is realized both by tuning the molecular weight of the dangling chains in the polymer networks and by silane grafting of the fillers, thereby creating a broad dynamic-gradient interfacial region comprising of entanglements. These entanglements can provide the slipping topological constraint that allows for tension equalization between and along the chains, while also tightening into rigid knots to prevent chain disentanglement upon stretching. Combined with ultrahigh loading of aluminum-fillers (90 wt%), this design provides a low Young's modulus (350.0 kPa), high fracture toughness (831.5 J m-2), excellent resilience (79%) and enhanced thermal conductivity (3.20 W m-1 k-1). This work presents a generalizable preparation strategy toward engineering soft, tough, and resilient high-filled elastomer composites, suitable for complex environments, such as automotive electronics, and wearable devices.

Programmable Shape Change in Semicrystalline Liquid Crystal Elastomers

Liquid crystal elastomers (LCEs) are stimuli-responsive materials capable of reversible and programmable shape change in response to an environmental stimulus. Despite the highly responsive nature of these materials, the modest elastic modulus and blocking stress exhibited by these actuating materials can be limiting in some engineering applications. Here, we engineer a semicrystalline LCE, where the incorporation of semicrystallinity in a lightly cross-linked liquid crystalline network yields tough and highly responsive materials. Directed self-assembly can be employed to program director profiles through the thickness of the semicrystalline LCE. In short, we use the alignment of a liquid crystal monomer phase to pattern the anisotropy of a semicrystalline polymer network. Both the semicrystalline-liquid crystalline and liquid crystalline-isotropic phase transition temperatures provide controllable shape transformations. A planarly aligned sample's normalized dimension parallel to the nematic director decreases from 1 at room temperature to 0.42 at 250 °C. The introduction of the semicrystalline nature also enhances the mechanical properties exhibited by the semicrystalline LCE. Semicrystalline LCEs have a storage modulus of 390 MPa at room temperature, and monodomain samples are capable of generating a contractile stress of 2.7 MPa on heating from 25 to 50 °C, far below the nematic to isotropic transition temperature. The robust mechanical properties of this material combined with the high actuation strain can be leveraged for applications such as soft robotics and actuators capable of doing significant work.

Design and synthesis of mechanochromic poly(ether-ester-urethane) elastomer with high toughness and resilience mediated by crystalline domains

Mechanochromic elastomers play an important role in stain sensing, materials damage alarming and stress detecting, etc. Low activation strain and stress, high toughness and resilience, and self-recovery ability are essential...

Stretchable and Self-Healable Poly(styrene-co-acrylonitrile) Elastomer with Metal-Ligand Coordination Complexes

Recently, soft electronics have attracted significant attention for various applications such as flexible devices, artificial electronic skins, and wearable devices. For practical applications, the key requirements are an appropriate electrical conductivity and excellent elastic properties. Herein, using the cyano-silver complexes resulting from coordination bonds between the nitrile group of poly(styrene-co-acrylonitrile) (SAN) and Ag ions, a self-healing elastomer demonstrating electrical conductivity is obtained. Because of these coordination complexes, the Ag-SAN elastomer possesses elasticity, compared with pristine SAN. The fracture strain of the Ag-SAN elastomers increased with the amount of added Ag ions, reaching up to 1000%. Additionally, owing to the presence of reversible coordination bonds, the elastomer exhibits self-healing properties at room temperature and electrical conductivity, thereby improving the possibility of its utilization in novel applications wherein elastic materials are generally exposed to external stimuli.

Systematic Evaluation of a Novel Self-Healing Poly(acrylamide-co-vinyl acetate)/Alginate Polymer Gel for Fluid Flow Control in High Temperature and High Salinity Reservoirs

Preferential fluid flow often occurs when water and CO₂ is injected into mature oilfields, significantly reducing their injection efficiency. Particle gels have been evaluated and applied to control the short circulation problems. This study systematically investigated a novel poly(acrylamide-co-vinyl acetate)/alginate-based interpenetrated gel system (Alg-IPNG) which is designed to control the preferential fluid flow problems in high-temperature reservoirs. Chromium acetate was incorporated into the gel system to provide the delayed crosslinking feature of the particle gels. The alginate polymer system can also take advantage of the Ca²⁺ ions in the formation water, which exist in most reservoirs, to reinforce its strength by capturing the Ca²⁺ to form Ca–alginate bonds. In this paper, various characterizations for the Alg-IPNGs before and after the self-healing process were introduced: (1) the elastic modulus is set at up to 1890 Pa, and (2) the water uptake ratio is set at up to 20. In addition, we also discuss their possible self-healing and reinforcement mechanisms. In particular, the self-healing starting time of the Alg-IPNG particles are modified between 38 to 60 h, which is related to the water uptake ratio, Ca²⁺ concentration, and temperature. The reinforced Alg-IPNG gel has an enhanced thermal stability (180 days) at the temperature up to 110 °C.