Synthesis and Aqueous Self-Assembly of ABCD Bottlebrush Block Copolymers

Bottlebrush Block Copolymers at the Interface of Immiscible Liquids: Adsorption and Lateral Packing

Amphiphilic bottlebrush block copolymers (BBCPs), having a hydrophilic bottlebrush polymer (BP) linked covalently to a hydrophobic BP, were found to segregate to liquid-liquid interfaces to minimize the free energy of the system. The key parameter influencing the outcome of the experiments is the ratio between the degree of polymerization of the backbone (NBB) and that of the side-chain brushes (NSC). Specifically, a spherical, star-like configuration results when NBB < NSC, while a cylindrical, bottlebrush-like shape is preferred when NBB > NSC. Dynamic interfacial tension (γ) and fluorescence recovery after photobleaching (FRAP) measurements show that the BBCP configuration influences the areal density and in-plane diffusion at the fluid interface. The characteristic relaxation times associated with BBCP adsorption (τA) and reorganization (τR) were determined by fitting time-dependent interfacial tension measurements to a sum of two exponential relaxation functions. Both τA and τR initially increased with NBB up to 92 repeat units, due to the larger hydrodynamic radius in solution and slower in-plane diffusivity, attributed to a shorter cross-sectional diameter of the side-chains near the block junction. This trend reversed at NBB = 190, with shorter τA and τR attributed to increased segregation strength and exposure of the bare water/toluene interface due to tilting and/or wiggling of the backbone chains, respectively. The adsorption energy barrier decreased with higher NBB, due to a reduced BBCP packing density at the fluid interface. This study provides fundamental insights into macromolecular assembly at fluid interfaces, as it pertains to unique bottlebrush block architectures.

Nonorthogonal Cascade Catalysis in Multicompartment Micelles

Multicompartment micelles (MCMs) containing acid and base sites in discrete domains are prepared from poly(norbornene)-based amphiphilic bottlebrush copolymers in aqueous media. The acid and base sites are localized in different compartments of the micelle, enabling the nonorthogonal reaction sequence: deacetalization - Knoevenagel condensation - Michael addition of acetals to 2-amino chromene derivatives. Computational simulations using dissipative particle dynamics (DPD) elucidated the bottlebrush composition required to effectively site-isolate the nonorthogonal catalysts. This contribution presents MCMs as a new class of nanostructures for one-pot multistep nonorthogonal cascade catalysis, laying the groundwork for the isolation of three or more incompatible catalysts to synthesize value-added compounds in a single reaction vessel, in water.

Self-Aggregation in Aqueous Media of Amphiphilic Diblock and Random Block Copolymers Composed of Monomers with Long Side Chains

Amphiphilic diblock copolymers and hydrophobically modified random block copolymers can self-assemble into different structures in a selective solvent. The formed structures depend on the copolymer properties, such as the ratio between the hydrophilic and the hydrophobic segments and their nature. In this work, we characterize by cryogenic transmission electron microscopy (cryo-TEM) and dynamic light scattering (DLS) the amphiphilic copolymers poly(2-dimethylamino ethyl methacrylate)-b-poly(lauryl methacrylate) (PDMAEMA-b-PLMA) and their quaternized derivatives QPDMAEMA-b-PLMA at different ratios between the hydrophilic and the hydrophobic segments. We present the various structures formed by these copolymers, including spherical and cylindrical micelles, as well as unilamellar and multilamellar vesicles. We also examined by these methods the random diblock copolymers poly(2-(dimethylamino) ethyl methacrylate)-b-poly(oligo(ethylene glycol) methyl ether methacrylate) (P(DMAEMA-co-Q_6/12DMAEMA)-b-POEGMA), which are partially hydrophobically modified by iodohexane (Q₆) or iodododecane (Q₁₂). The polymers with a small POEGMA block did not form any specific nanostructure, while a polymer with a larger POEGMA block formed spherical and cylindrical micelles. This nanostructural characterization could lead to the efficient design and use of these polymers as carriers of hydrophobic or hydrophilic compounds for biomedical applications.

Catalytically Active Multicompartment Micelles

This article presents the self-assembly behavior of multicompartment micelles (MCMs) in water into morphologies with multiple segregated domains and their use as supports for aqueous catalysis. A library of poly(norbornene)-based amphiphilic bottlebrush copolymers containing covalently attached l-proline in the hydrophobic, styrene, and pentafluorostyrene domains and a poly(ethylene glycol)-containing repeat unit as the hydrophilic block have been synthesized using ring-opening metathesis polymerization. Interaction parameter (χ) values between amphiphilic blocks were determined using a Flory-Huggins-based computational model. The morphologies of the MCMs are observed via cryogenic transmission electron microscopy and modeled using dissipative particle dynamic simulations. The catalytic activities of these MCM nanoreactors were systematically investigated using the aldol addition between 4-nitrobenzaldehyde and cyclohexanone in water as a model reaction. MCMs present an ideal environment for catalysis by providing control over water content and enhancing interactions between the catalytic sites and the aldehyde substrate, thereby forming the aldol product in high yields and selectivities that is otherwise not possible under aqueous conditions. Catalyst location, block ratio, and functionality have substantial influences on micelle morphology and, ultimately, catalytic efficiency. "Clover-like" and "core-shell" micelle morphologies displayed the best catalytic activity. Our MCM-based catalytic system expands the application of these nanostructures beyond selective storage of guest molecules and demonstrates the importance of micelle morphology on catalytic activity.

Influences of the Periodicity in Molecular Architecture on the Phase Diagrams and Microphase Transitions of the Janus Double-Brush Copolymer with a Loose Graft

The backbone of the Janus double-brush copolymer may break during long-term service, but whether this breakage affects the self-assembled phase state and microphase transitions of the material is still unknown. For the Janus double-brush copolymers with a periodicity in molecular architecture ranging from 1 to 10, the influences of the architectural periodicity on their phase diagrams and order–disorder transitions (ODT) were investigated by the self-consistent mean field theory (SCFT). In total, nine microphases with long-range order were found. By comparing the phase diagrams between copolymers of different periodicity, a decrease in periodicity or breakage along the copolymer backbone had nearly no influence on the phase diagrams unless the periodicity was too short to be smaller than 3. For copolymers with neutral backbones, a decrease in periodicity or breakage along the copolymer backbone reduced the critical segregation strengths of the whole copolymer at ODT. The equations for the critical segregation strengths at ODT, the architectural periodicity, and the volume fraction of the backbone were established for the Janus double-brush copolymers. The theoretical calculations were consistent with the previous theoretical, experimental, and simulation results.

Interaction potential for coarse-grained models of bottlebrush polymers

Bottlebrush polymers are a class of highly branched macromolecules that show promise for applications such as self-assembled photonic materials and tunable elastomers. However, computational studies of bottlebrush polymer solutions and melts remain challenging due to the high computational cost involved in explicitly accounting for the presence of side chains. Here, we consider a coarse-grained molecular model of bottlebrush polymers where the side chains are modeled implicitly, with the aim of expediting simulations by accessing longer length and time scales. The key ingredients of this model are the size of a coarse-grained segment and a suitably coarse-grained interaction potential between the non-bonded segments. Prior studies have not focused on developing explicit forms of such potentials, instead, relying on scaling arguments to model non-bonded interactions. Here, we show how to systematically calculate an interaction potential between the coarse-grained segments of bottlebrush from finer grained explicit side chain models using Monte Carlo and Brownian dynamics and then incorporate it into an implicit side chain model. We compare the predictions from our coarse-grained implicit side chain model with those obtained from models with explicit side chains in terms of the potential of mean force, the osmotic second virial coefficient, and the interpenetration function, highlighting the range of applicability and limitations of the coarse-grained representation. Although presented in the context of homopolymer bottlebrushes in athermal solvents, our proposed method can be extended to other solvent conditions as well as to different monomer chemistries. We expect that our implicit side chain model will prove useful for accelerating large-scale simulations of bottlebrush solutions and assembly.

From macromonomers to bottlebrush copolymers with sequence control: synthesis, properties, and applications

Bottlebrush polymers (BBPs) are a type of comb-like macromolecules with densely grafted polymeric sidechains attached to the polymer backbones, and many intriguing properties and applications have been demonstrated due to...

Near-Infrared Fluorescent Micelles from Poly(norbornene) Brush Triblock Copolymers for Nanotheranostics

This contribution describes the design and synthesis of multifunctional micelles based on amphiphilic brush block copolymers (BBCPs) for imaging and selective drug delivery of natural anticancer compounds. Well-defined BBCPs were synthesized via one-pot multi-step sequential grafting-through ring-opening metathesis polymerization (ROMP) of norbornene-based macroinitiators. The norbornenes employed contain a poly(ethylene glycol) methyl ether chain, an alkyl bromide chain, and/or a near-infrared (NIR) fluorescent cyanine dye. After block copolymerization, post-polymerization transformations using bromide-azide substitution, followed by the strain-promoted azide-alkyne cycloaddition (SPAAC) allowed for the functionalization of the BBCPs with the piplartine (PPT) moiety, a natural product with well-documented cytotoxicity against cancer cell lines, via an ester linker between the drug and the polymer side chain. The amphiphilic BBCPs self-assembled in aqueous media into nano-sized spherical micelles with neutral surface charges, as confirmed by dynamic light scattering analysis and transmission electron microscopy. During self-assembly, paclitaxel (PTX) could be effectively encapsulated into the hydrophobic core to form stable PTX-loaded micelles with high loading capacities and encapsulation efficiencies. The NIR fluorescent dye-containing micelles exhibited remarkable photophysical properties, excellent colloidal stability under physiological conditions, and a pH-induced disassembly under slightly acidic conditions, allowing for the release of the drug in a controlled manner. The in vitro studies demonstrated that the micelles without the drug (blank micelles) are biocompatible at concentrations of up to 1 mg mL^-1 and present a high cellular internalization capacity toward MCF-7 cancer cells. The drug-functionalized micelles showed in vitro cytotoxicity comparable to free PPT and PTX against MCF-7 and PC3 cancer cells, confirming efficient drug release into the tumor environment upon cellular internalization. Furthermore, the drug-functionalized micelles exhibited higher selectivity than the pristine drugs and preferential cellular uptake in human cancer cell lines (MCF-7 and PC3) when compared to the normal breast cell line (MCF10A). This study provides an efficient strategy for the development of versatile polymeric nanosystems for drug delivery and image-guided diagnostics. Notably, the easy functionalization of BBCP side chains via SPAAC opens up the possibility for the preparation of a library of multifunctional systems containing other drugs or functionalities, such as target groups for recognition.

Compartmentalization and Photoregulating Pathways for Incompatible Tandem Catalysis

This contribution describes an advanced compartmentalized micellar nanoreactor that possesses a reversible photoresponsive feature and its application toward photoregulating reaction pathways for incompatible tandem catalysis under aqueous conditions. The smart nanoreactor is based on multifunctional amphiphilic poly(2-oxazoline)s and covalently cross-linked with spiropyran upon micelle formation in water. It responds to light irradiation in a wavelength-selective manner switching its morphology as confirmed by dynamic light scattering and cryo-transition electron microscopy. The compartmental structure renders distinct nanoconfinements for two incompatible enantioselective transformations: a rhodium-diene complex-catalyzed asymmetric 1,4-addition occurs in the hydrophilic corona, while a Rh-TsDPEN-catalyzed asymmetric transfer hydrogenation proceeds in the hydrophobic core. Control experiments and kinetic studies showed that the gated behavior induced by the phototriggered reversible spiropyran to merocyanine transition in the cross-linking layer is key to discriminate among substrates/reagents during the catalysis. The smart nanoreactor realized photoregulation to direct the reaction pathway to give a multichiral product with high conversions and perfect enantioselectivities in aqueous media. Our SCM catalytic system, on a basic level, mimics the concepts of compartmentalization and responsiveness Nature uses to coordinate thousands of incompatible chemical transformations into streamlined metabolic processes.

One-pot synthesis of linear triblock terpolymers and their aqueous self-assembly

Compartmentalized micelles are prepared through the self-assembly of linear triblock terpolymers containing hydrophilic (H), lipophilic (L), and fluorophilic (F) domains.

Interaction between Bottlebrush Polymers and Phospholipid Membranes in Solutions

In this work, the interactions between bottlebrush polymers and phospholipid membranes were investigated using dissipative particle dynamics simulations. The weak and strong adsorption phenomena between the polymers and membranes were examined by calculating the system parameters. A spring model was introduced to explain the variances in the shape factors and the radius of gyration of the bottlebrush polymers, as well as the order parameters of the phospholipid membrane in the pulling processes. This work provides further understanding for the application of bottlebrush polymers in biological processes.