Thermal Transport in Polyethylene: The Effect of Force Fields and Crystallinity

Enhancing thermal transport of epoxy composites with vertically aligned graphene in situ grown on the thermal interface

The escalating demands for miniaturization, integration, and portability in electronic devices have underscored the criticality of efficient heat dissipation. The utilization of high-performance thermal interface materials (TIMs) to fill the gaps between contacting surfaces holds significant potential for enhancing heat transfer efficiency. Herein, we successfully enhance the thermal properties of the epoxy composite TIM by integrating in situ grown vertically aligned graphene on the metal surface using radio frequency plasma-enhanced chemical vapor deposition (RF-PECVD). To investigate the effect of vertical graphene on epoxy, the sandwich structure of copper/vertical graphene-epoxy/copper (Cu/VG-EP/Cu) is fabricated by incorporating epoxy resin. The experimental results demonstrate that the thermal conductivity of VG-EP reaches 2.06 W m-1 K-1 and achieves an impressive 1215% maximum enhancement. Furthermore, the numerical simulation findings show that vertical graphene consistent with the temperature gradient exhibits the highest heat transfer efficiency. This work presents an in-depth study of vertically aligned graphene within the epoxy resin, highlighting the advantages of vertically aligned fillers and offering novel perspectives for the advancement of TIMs.

Designing Accurate Moment Tensor Potentials for Phonon-Related Properties of Crystalline Polymers

The phonon-related properties of crystalline polymers are highly relevant for various applications. Their simulation is, however, particularly challenging, as the systems that need to be modeled are often too extended to be treated by ab initio methods, while classical force fields are too inaccurate. Machine-learned potentials parametrized against material-specific ab initio data hold the promise of being extremely accurate and also highly efficient. Still, for their successful application, protocols for their parametrization need to be established to ensure an optimal performance, and the resulting potentials need to be thoroughly benchmarked. These tasks are tackled in the current manuscript, where we devise a protocol for parametrizing moment tensor potentials (MTPs) to describe the structural properties, phonon band structures, elastic constants, and forces in molecular dynamics simulations for three prototypical crystalline polymers: polyethylene (PE), polythiophene (PT), and poly-3-hexylthiophene (P3HT). For PE, the thermal conductivity and thermal expansion are also simulated and compared to experiments. A central element of the approach is to choose training data in view of the considered use case of the MTPs. This not only yields a massive speedup for complex calculations while essentially maintaining DFT accuracy, but also enables the reliable simulation of properties that, so far, have been entirely out of reach.

Hop, Skip, and Jump: Hydrogen Molecular Transport through Amorphous Polyethylene Matrices Studied via Molecular Dynamics Simulations

In the pursuit of advancing and diversifying energy technologies for a more sustainable future, the possibilities of hydrogen (H2) usage will broaden, as will our understanding of its containment materials. Polyethylene (PE) has a vast assortment of uses and applications, which are growing with demands for alternative energy possibilities. One use of PE liner is as a prime candidate for nonmetallic piping and pressurized type IV storage devices. Such applications require PE to effectively prevent H2 transport through containment systems. To study the molecular transport mechanism of hydrogen through polymeric barriers, a system containing hydrogen molecules absorbed within amorphous PE is modeled here using molecular dynamics simulations. The simulations are conducted within a range of temperatures that span the glass transition temperature of amorphous PE. The simulated PE displays bulk density, radius of gyration, and self-diffusion coefficient that are consistent with experimental data. The simulated trajectories are interrogated to study the movement of the guest gas molecules. The results show that the diffusion coefficients increase with temperature, as expected. However, the mobility of the PE chains is found to affect the mobility of absorbed H2 molecules to a much lower extent than it affects that of CH4 molecules because of the much smaller size of the former than of the latter guest. From a molecular perspective, a "hopping" mechanism is observed, according to which H2 molecules hop between one vacant free volume space to another within the polymer matrix, in combination with longer, straight, undisturbed "jumps" or "skips" along directions aligned with regions of ordered PE chains. This suggests that the orientation of the crystallites within the semicrystalline PE matrix affects the H2 containment. Implications of these findings toward PE usage as containment material are discussed.

The Effect of Mechanical Elongation on the Thermal Conductivity of Amorphous and Semicrystalline Thermoplastic Polyimides: Atomistic Simulations

Over the past few decades, the enhancement of polymer thermal conductivity has attracted considerable attention in the scientific community due to its potential for the development of new thermal interface materials (TIM) for both electronic and electrical devices. The mechanical elongation of polymers may be considered as an appropriate tool for the improvement of heat transport through polymers without the necessary addition of nanofillers. Polyimides (PIs) in particular have some of the best thermal, dielectric, and mechanical properties, as well as radiation and chemical resistance. They can therefore be used as polymer binders in TIM without compromising their dielectric properties. In the present study, the effects of uniaxial deformation on the thermal conductivity of thermoplastic PIs were examined for the first time using atomistic computer simulations. We believe that this approach will be important for the development of thermal interface materials based on thermoplastic PIs with improved thermal conductivity properties. Current research has focused on the analysis of three thermoplastic PIs: two semicrystalline, namely BPDA-P3 and R-BAPB; and one amorphous, ULTEM^TM. To evaluate the impact of uniaxial deformation on the thermal conductivity, samples of these PIs were deformed up to 200% at a temperature of 600 K, slightly above the melting temperatures of BPDA-P3 and R-BAPB. The thermal conductivity coefficients of these PIs increased in the glassy state and above the glass transition point. Notably, some improvement in the thermal conductivity of the amorphous polyimide ULTEM^TM was achieved. Our study demonstrates that the thermal conductivity coefficient is anisotropic in different directions with respect to the deformation axis and shows a significant increase in both semicrystalline and amorphous PIs in the direction parallel to the deformation. Both types of structural ordering (self-ordering of semicrystalline PI and mechanical elongation) led to the same significant increase in thermal conductivity coefficient.

State-of-the-Art, Opportunities, and Challenges in Bottom-up Synthesis of Polymers with High Thermal Conductivity

In contrast to metals, polymers are predominantly thermal and electrical insulators. With their unparalleled advantages such as light weight, turning polymer insulators into heat conductors with metal-like thermal conductivity is...