Organic Polymers as Additives in Perovskite Solar Cells

Chemical Reaction of FA Cations Enables Efficient and Stable Perovskite Solar Cells

Organometal halide perovskite solar cells (PSCs) have received great attention owing to a rapid increase in power conversion efficiency (PCE) over the last decade. However, the deficit of long-term stability is a major obstacle to the implementation of PSCs in commercialization. The defects in perovskite films are considered as one of the primary causes. To address this issue, isocyanic acid (HNCO) is introduced as an additive into the perovskite film, in which the added molecules form covalent bonds with FA cations via a chemical reaction. This chemical reaction gives rise to an efficient passivation on the perovskite film, resulting in an improved film quality, a suppressed non-radiation recombination, a facilitated carrier transport, and optimization of energy band levels. As a result, the HNCO-based PSCs achieve a high PCE of 24.41% with excellent storage stability both in an inert atmosphere and in air. Different from conventional passivation methods based on coordination effects, this work presents an alternative chemical reaction for defect passivation, which opens an avenue toward defect-mitigated PSCs showing enhanced performance and stability.

Crystallization Kinetics of Hybrid Perovskite Solar Cells

Metal halide perovskites (MHPs) are considered ideal photovoltaic materials due to their variable crystal material composition and excellent photoelectric properties. However, this variability in composition leads to complex crystallization processes in the manufacturing of Metal halide perovskite (MHP) thin films, resulting in reduced crystallinity and subsequent performance loss in the final device. Thus, understanding and controlling the crystallization dynamics of perovskite materials are essential for improving the stability and performance of PSCs (Perovskite Solar Cells). To investigate the impact of crystallization characteristics on the properties of MHP films and identify corresponding modulation strategies, we primarily discuss the relevant aspects of MHP crystallization kinetics, systematically summarize theoretical methods, and outline modulation techniques for MHP crystallization, including solution engineering, additive engineering, and component engineering, which helps highlight the prospects and current challenges in perovskite crystallization kinetics.

Photo-Cross-Linked Fullerene-Based Hole Transport Material for Moisture-Resistant Regular Fullerene Sandwich Perovskite Solar Cells

Despite the high efficiencies currently achieved with perovskite solar cells (PSCs), the need to develop stable devices, particularly in humid conditions, still remains. This study presents the synthesis of a novel photo-cross-linkable fullerene-based hole transport material named FT12. For the first time, the photo-cross-linking process is applied to PSCs, resulting in the preparation of photo-cross-linked FT12 (PCL FT12). Regular PSCs based on C60-sandwich architectures were fabricated using FT12 and PCL FT12 as dopant-free hole transport layers (HTLs) and compared to the reference spiro-OMeTAD. The photovoltaic results demonstrate that both FT12 and PCL FT12 significantly outperform pristine spiro-OMeTAD regarding device performance and stability. The comparison between devices based on FT12 and PCL FT12 demonstrates that the photo-cross-linking process enhances device efficiency. This improvement is primarily attributed to enhanced charge extraction, partial oxidation of the HTL, increased hole mobility, and improved layer morphology. PCL FT12-based devices exhibit improved stability compared to FT12 devices, primarily due to the superior moisture resistance achieved through photo-cross-linking.

Perovskite Solar Cells: A Review of the Latest Advances in Materials, Fabrication Techniques, and Stability Enhancement Strategies

Perovskite solar cells (PSCs) are gaining popularity due to their high efficiency and low-cost fabrication. In recent decades, noticeable research efforts have been devoted to improving the stability of these cells under ambient conditions. Moreover, researchers are exploring new materials and fabrication techniques to enhance the performance of PSCs under various environmental conditions. The mechanical stability of flexible PSCs is another area of research that has gained significant attention. The latest research also focuses on developing tin-based PSCs that can overcome the challenges associated with lead-based perovskites. This review article provides a comprehensive overview of the latest advances in materials, fabrication techniques, and stability enhancement strategies for PSCs. It discusses the recent progress in perovskite crystal structure engineering, device construction, and fabrication procedures that has led to significant improvements in the photo conversion efficiency of these solar devices. The article also highlights the challenges associated with PSCs such as their poor stability under ambient conditions and discusses various strategies employed to enhance their stability. These strategies include the use of novel materials for charge transport layers and encapsulation techniques to protect PSCs from moisture and oxygen. Finally, this article provides a critical assessment of the current state of the art in PSC research and discusses future prospects for this technology. This review concludes that PSCs have great potential as a low-cost alternative to conventional silicon-based solar cells but require further research to improve their stability under ambient conditions in view of their definitive commercialization.

Heterojunction solar cell based on donor-acceptor pi-conjugated naphthalene bisbenzimidazole, perylene bisbenzimidazole, and naphthalene imidazole: A spectroscopic, microscopic and DFT assessment

This study represents detailed vibrational analysis of naphthalene bisbenzimidazole (NBBI), perylene bisbenzimidazole (PBBI), and naphthalene imidazole (NI) by vibrational spectroscopic (Fourier Transform Infrared (FT-IR) and Raman), Atomic Force Microscopic (AFM) and quantum chemical studies for the first time. These sorts of compounds provide an opportunity to build potential n-type organic thin film phototransistors which can be used as organic semiconductors. Optimized molecular structures and vibrational wavenumbers of these molecules in their ground states have been calculated by Density Functional Theory (DFT) using B3LYP functional with 6-311++G(d,p) basis set. Finally, theoretical UV-Visible spectrum was predicted and Light Harvesting Efficiencies (LHE) were evaluated. AFM analysis revealed that PBBI has the highest surface roughness thus exhibits an increase in high Jsc value and high conversion efficiency.

Dendrimer Modification Strategy Based on the Understanding of the Photovoltaic Mechanism of a Perovskite Device under Full Sun and Indoor Light

The wide-band-gap inorganic CsPbI₂Br perovskite material provides a highly matched absorption range with the indoor light spectrum and is expected to be used in the fabrication of highly efficient indoor photovoltaic cells (IPVs) and self-powered low-power Internet of Things (IoT) sensors. However, the defects that cause nonradiative recombination and ion migration are assumed to form leakage loss channels, resulting in a severe impact on the open-circuit voltage (V_OC) and the fill factor (FF) of IPVs. Herein, we introduce poly(amidoamine) (PAMAM) dendrimers with multiple passivation sites to fully repair the leakage channels in the devices, taking into account the characteristics of IPVs that are extremely sensitive to nonradiative recombination and shunt resistance. The as-optimized IPVs demonstrate a promising PCE of 35.71% under a fluorescent light source (1000 lux), with V_OC increased from 0.99 to 1.06 V and FF improved from 75.21 to 84.39%. The present work provides insight into the photovoltaic mechanism of perovskites under full sun and indoor light, which provides guidance for perovskite photovoltaic technology with industrialization prospects.

The Role of Polymers in Halide Perovskite Resistive Switching Devices

Currently, halide perovskites (HPs) are gaining traction in multiple applications, such as photovoltaics and resistive switching (RS) devices. In RS devices, the high electrical conductivity, tunable bandgap, good stability, and low-cost synthesis and processing make HPs promising as active layers. Additionally, the use of polymers in improving the RS properties of lead (Pb) and Pb-free HP devices was described in several recent reports. Thus, this review explored the in-depth role of polymers in optimizing HP RS devices. In this review, the effect of polymers on the ON/OFF ratio, retention, and endurance properties was successfully investigated. The polymers were discovered to be commonly utilized as passivation layers, charge transfer enhancement, and composite materials. Hence, further HP RS improvement integrated with polymers revealed promising approaches to delivering efficient memory devices. Based on the review, detailed insights into the significance of polymers in producing high-performance RS device technology were effectively understood.

Surface Chelation Enabled by Polymer-Doping for Self-Healable Perovskite Solar Cells

Polymer doping is an efficient approach to achieve self-healing perovskite solar cells. However, achieving high self-healing efficiency under moderate conditions remains challenging. Herein, an innovative self-healable polysiloxane (PAT) containing plenty of thiourea hydrogen bonds was designed and introduced into perovskite films. Abundant thiourea hydrogen bonds in PAT facilitated the self-healing of cracks at grain boundaries for damaged SPSCs. Importantly, the doped SPSCs demonstrated a champion efficiency of 19.58% with little hysteresis, almost rivalling those achieved in control atmosphere. Additionally, owing to the effective chelation by PAT and good level of thiourea hydrogen bonds, after 800 cycles of stretching, releasing and self-healing, the doped SPSCs retained 85% of their original IPCE. The self-healing characteristics were demonstrated in situ after stretching at 20% strain for 200 cycles. This strategy of pyridine-based supramolecular doping in SPSCs paves a promising way for achieving efficient and self-healable crystalline semiconductors.

Interface chelation induced by pyridine-based polymer for efficient and durable air-processed perovskite solar cells

Polymer doping is a significant approach to precisely control nucleation and crystal growth of perovskites and enhance electronic quality in perovskite solar cells (PSC) prepared in air. Here, a brand-new self-healing polysiloxane (SHP) with dynamic 2,6-pyridinedicarboxamide (PDCA) coordination units and plenty of hydrogen bonds was designed and incorporated into perovskite films. PDCA units, showing strong intermolecular Pb 2+ -N amido , I - -N pyridyl , and Pb 2+ -O amido coordination interactions, were expected to enhance crystallinity and passivate the grain boundary. In addition, abundant hydrogen bonds in SHP afforded the self-healing of cracks at grain boundaries for fatigue PSCs. Significantly, the doped device demonstrated a champion efficiency of 19.50% with inconspicuous hysteresis, almost rivaling those achieved in control atmosphere. This strategy of heterocyclic-based macromolecular doping in PSCs will pave a way for realizing efficient and durable crystalline semiconductors.