Amphiphilic Random-Block Copolymer Micelles in Water: Precise and Dynamic Self-Assembly Controlled by Random Copolymer Association

Synthesis and Characterization of Polyion Complex Micelles with Glycopolymer Shells for Drug Delivery Carriers

Double hydrophilic diblock copolymers (G20A100 and G100A98), composed of non-charged poly(glycosyloxyethyl methacrylate) (PGEMA, G) and cationic poly((3-acrylamidopropyl)trimethylammonium chloride), were synthesized via reversible addition-fragementation chain transfer (RAFT) radical polymerization. Likewise, diblock copolymers (G20S80 and G100S78), composed of PGEMA and anionic poly(2-acrylamido-2-methylpropanesulfonate) were synthesized via RAFT. The subscripts in these abbreviations indicate the degree of polymerization (DP) of each block. Polyion complex (PIC) aggregates (G20A100/G20S80 and G100A98/G100S78) were formed through electrostatic interactions by combining oppositely charged diblock copolymers with matched DPs for charge neutralization. The hydrodynamic radii of the G20A100/G20S80 and G100A98/G100S78 PIC aggregates were 77.4 and 26.2 nm, respectively, with zeta potentials close to 0 mV. The G20A100/G20S80 PIC micelles tend to form intermicellar aggregates, resulting in an increase in the particle size over time. In contrast, G100A98/G100S78 PIC micelles exhibited colloidal stability with a constant spherical core-shell shape, which was unaffected by time. The morphology and stability of the PIC aggregates depend upon the DP ratio of PGEMA and oppositely charged polyelectrolyte blocks. Both G20A100/G20S80 and G100A98/G100S78 PIC aggregates dissociated above 0.8 M NaCl due to the screening effect of NaCl.

Tuning polymer micelle size and dynamics with solvophobic block structure

HYPOTHESIS

Micelles formed by copolymers with mixed solvophobic blocks have attracted much attention lately. It is expected that changing the mixed blocks sequence can be used as a tool to influence the micellization behavior in a way that is not equivalent to simply varying the incompatibility parameter for pure diblock-copolymers. Simulations: By using coarse-grained simulations, the micellization behavior of copolymers with twelve types of solvophobic blocks, which differed in the fraction f as well as the sequence of solvophilic units in the solvophobic blocks, was studied. To enable quantitative comparison of systems with different f, an "effective" incompatibility parameter was introduced.

FINDINGS

The micelles size distributions and dynamics were found to be significantly dependent on both f and the fine details of the sequence. When the solvophobic block sequences were obtained statistically using a model of copolymerization, a strong influence of the reactivity ratios on the resulting micelles was found. Even a moderate tendency to form gradient-like sequences resulted in a noticeable increase in the micelles size. The dynamic properties of the micelles were studied by investigating the rate at which the chains escape from them. The addition of soluble units into the solvophobic block was shown to dramatically decrease the tendency to form kinetically frozen states; gradient-like sequences demonstrated more sluggish dynamics. The physical reasons for the observed peculiarities are discussed in detail.

Reprocessible, Reusable, and Self-Healing Polymeric Adsorbent for Removing Perfluorinated Pollutants

Here, we report a reprocessible, reusable, self-healing, and form-switching polymeric adsorbent for remediating fluorinated pollutants in water. The copolymer hydrogel is designed to contain fluorophilic segments and cationic segments to induce strong binding with perfluorinated pollutants. The sorption performance reveals rapid and quantitative removal of these pollutants, driven by the synergistic effect of fluorophilic and electrostatic interaction. Importantly, a disulfide-containing dynamic crosslinker plays a crucial role in imparting multifunctionality. This enables self-healing by the restoration of crosslinks at the cut surfaces by disulfide exchange reactions and allows for the repeated use of the adsorbent via multiple adsorption-desorption cycles. Furthermore, the adsorbent is reprocessible by cleaving the crosslinks to afford linear copolymers, which can be repolymerized into a hydrogel network on demand. Also, form-switching capability is showcased through the aqueous self-assembly of linear copolymers into a fluorinated micelle, serving as another form of adsorbent for pollutant removal.

Water-Soluble Luminescent Polymers with Room-Temperature Phosphorescence Based on the α-Amino Acids

Nonconventional luminophores have received increasing attention, owing to their fundamental importance, advantages in outstanding biocompatibility, easy preparation, environmental friendliness, and potential applications in sensing, imaging, and encryption. Purely organic molecules with outstanding fluorescence and room-temperature phosphorescence (RTP) have emerged as a new library of benign afterglow agents. However, the cost, toxicity, high reactivity, and poor stability of materials also limit their practical applications. Therefore, some natural products, synthetic compounds, and biomolecules have entered horizons of people. The as-designed exhibits sky blue and green fluorescence emission and green RTP emission (a lifetime of 343 ms and phosphorescence quantum of 15.3%) under air condition. This study presents an organic fluorescence for biological imaging and RTP for anti-counterfeiting and encryption based on amino acids, maleic anhydride and 4-vinylbenzenesulfonic acid sodium salt hydrate. This study provides a strategy for nonconventional luminophores in designing and synthesizing pure organic RTP materials.

Advanced Application of Polymer Nanocarriers in Delivery of Active Ingredients from Traditional Chinese Medicines

Active ingredients from Traditional Chinese Medicines (TCMs) have been a cornerstone of healthcare for millennia, offering a rich source of bioactive compounds with therapeutic potential. However, the clinical application of TCMs is often limited by challenges such as poor solubility, low bioavailability, and variable pharmacokinetics. To address these issues, the development of advanced polymer nanocarriers has emerged as a promising strategy for the delivery of TCMs. This review focuses on the introduction of common active ingredients from TCMs and the recent advancements in the design and application of polymer nanocarriers for enhancing the efficacy and safety of TCMs. We begin by discussing the unique properties of TCMs and the inherent challenges associated with their delivery. We then delve into the types of polymeric nanocarriers, including polymer micelles, polymer vesicles, polymer hydrogels, and polymer drug conjugates, highlighting their application in the delivery of active ingredients from TCMs. The main body of the review presents a comprehensive analysis of the state-of-the-art nanocarrier systems and introduces the impact of these nanocarriers on the solubility, stability, and bioavailability of TCM components. On the basis of this, we provide an outlook on the future directions of polymer nanocarriers in TCM delivery. This review underscores the transformative potential of polymer nanocarriers in revolutionizing TCM delivery, offering a pathway to harness the full therapeutic potential of TCMs while ensuring safety and efficacy in a modern medical context.

Investigating the effect of the micelle structures of block and random copolymers on dye solubilization

To elucidate the correlation between dye solubilization into micelles and their core-shell aggregated structure, the structures of block and random copolymer micelles were characterized. The block copolymer micelles exhibited a higher dye solubilization capacity which correlated with their core volume, clear core-shell contrast and slow solubilization rate.

Multifunctional Fluoropolymer-Engineered Magnetic Nanoparticles to Facilitate Blood-Brain Barrier Penetration and Effective Gene Silencing in Medulloblastoma

Patients with brain cancers including medulloblastoma lack treatments that are effective long-term and without side effects. In this study, a multifunctional fluoropolymer-engineered iron oxide nanoparticle gene-therapeutic platform is presented to overcome these challenges. The fluoropolymers are designed and synthesized to incorporate various properties including robust anchoring moieties for efficient surface coating, cationic components to facilitate short interference RNA (siRNA) binding, and a fluorinated tail to ensure stability in serum. The blood-brain barrier (BBB) tailored system demonstrates enhanced BBB penetration, facilitates delivery of functionally active siRNA to medulloblastoma cells, and delivers a significant, almost complete block in protein expression within an in vitro extracellular acidic environment (pH 6.7) - as favored by most cancer cells. In vivo, it effectively crosses an intact BBB, provides contrast for magnetic resonance imaging (MRI), and delivers siRNA capable of slowing tumor growth without causing signs of toxicity - meaning it possesses a safe theranostic function. The pioneering methodology applied shows significant promise in the advancement of brain and tumor microenvironment-focused MRI-siRNA theranostics for the better treatment and diagnosis of medulloblastoma.

Nano-based drug delivery systems for active ingredients from traditional Chinese medicine: Harnessing the power of nanotechnology

Introduction: Traditional Chinese medicine (TCM) is gaining worldwide popularity as a complementary and alternative medicine. The isolation and characterization of active ingredients from TCM has become optional strategies for drug development. In order to overcome the inherent limitations of these natural products such as poor water solubility and low bioavailability, the combination of nanotechnology with TCM has been explored. Taking advantage of the benefits offered by the nanoscale, various drug delivery systems have been designed to enhance the efficacy of TCM in the treatment and prevention of diseases. Methods: The manuscript aims to present years of research dedicated to the application of nanotechnology in the field of TCM. Results: The manuscript discusses the formulation, characteristics and therapeutic effects of nano-TCM. Additionally, the formation of carrier-free nanomedicines through self-assembly between active ingredients of TCM is summarized. Finally, the paper discusses the safety behind the application of nano-TCM and proposes potential research directions. Discussion: Despite some achievements, the safety of nano-TCM still need special attention. Furthermore, exploring the substance basis of TCM formulas from the perspective of nanotechnology may provide direction for elucidating the scientific intension of TCM formulas.

Toughening of epoxy thermosets by self-assembled nanostructures of amphiphilic comb-like random copolymers

Amphiphilic comb-like random copolymers synthesized from poly(ethylene glycol) methyl ether methacrylate (PEGMMA) and stearyl methacrylate (SMA) with PEGMMA contents ranging between 30 wt% and 25 wt% were demonstrated to self-assemble into various well-defined nanostructures, including spherical micelles, wormlike micelles, and vesicle-like nanodomains, in anhydride-cured epoxy thermosets. In addition, the polymer blends of the comb-like random copolymer and poly(stearyl methacrylate) were prepared and incorporated into epoxy thermosets to form irregularly shaped nanodomains. Our research findings indicate that both the comb-like random copolymers and polymer blends are suitable as toughening modifiers for epoxy. When added at a concentration of 5 wt%, both types of modifiers lead to substantial improvements in the tensile toughness (>289%) and fracture toughness of epoxy thermosets, with minor reductions in their elastic modulus (<16%) and glass transition temperature (<6.1 °C). The fracture toughness evaluated in terms of the critical stress intensity factor (KIC) and the strain energy release rate (GIC) increased by more than 67% and 131% for the modified epoxy thermosets containing comb-like random copolymers.

The Nanostructured Self-Assembly and Thermoresponsiveness in Water of Amphiphilic Copolymers Carrying Oligoethylene Glycol and Polysiloxane Side Chains

Amphiphilic copolymer self-assembly is a straightforward approach to obtain responsive micelles, nanoparticles, and vesicles that are particularly attractive for biomedicine, i.e., for the delivery of functional molecules. Here, amphiphilic copolymers of hydrophobic polysiloxane methacrylate and hydrophilic oligo (ethylene glycol) methyl ether methacrylate with different lengths of oxyethylenic side chains were synthesized via controlled RAFT radical polymerization and characterized both thermally and in solution. In particular, the thermoresponsive and self-assembling behavior of the water-soluble copolymers in water was investigated via complementary techniques such as light transmittance, dynamic light scattering (DLS), and small-angle X-ray scattering (SAXS) measurements. All the copolymers synthesized were thermoresponsive, displaying a cloud point temperature (T_cp) strongly dependent on macromolecular parameters such as the length of the oligo(ethylene glycol) side chains and the content of the SiMA counits, as well as the concentration of the copolymer in water, which is consistent with a lower critical solution temperature (LCST)-type behavior. SAXS analysis revealed that the copolymers formed nanostructures in water below T_cp, whose dimension and shape depended on the content of the hydrophobic components in the copolymer. The hydrodynamic diameter (D_h) determined by DLS increased with the amount of SiMA and the associated morphology at higher SiMA contents was found to be pearl-necklace-micelle-like, composed of connected hydrophobic cores. These novel amphiphilic copolymers were able to modulate thermoresponsiveness in water in a wide range of temperatures, including the physiological temperature, as well as the dimension and shape of their nanostructured assemblies, simply by varying their chemical composition and the length of the hydrophilic side chains.

Synthesis, Characterization, Conformation in Solution, and Thermoresponsiveness of Polymer Brushes of methoxy[oligo (propylene glycol)-block-oligo(ethylene glycol)]methacrylate and N-[3-(dimethylamino)propyl]methacrylamide Obtained via RAFT Polymerization

The thermo- and pH-responsive polymer brushes based on methoxy[oligo(propyleneglycol)8-block-oligo(ethyleneglycol)8]methacrylate with different concentrations of N-[3-(dimethylamino)propyl]methacrylamide (from 0% to 20%) were synthesized via RAFT polymerization. The “grafting-through” approach was used to prepare the low-molar-mass dispersion samples (Mw/Mn ≈ 1.3). Molar masses and hydrodynamic characteristics were obtained using static and dynamic light scattering and viscometry. The solvents used were acetonitrile, DMFA, and water. The molar masses of the prepared samples ranged from 40,000 to 60,000 g·mol–1. The macromolecules of these polymer brushes were modeled using a prolate revolution ellipsoid or a cylinder with spherical ends. In water, micelle-like aggregates were formed. Critical micelle concentrations decreased with the content of N-[3-(dimethylamino)propyl]methacrylamide. Molecular brushes demonstrated thermo- and pH-responsiveness in water–salt solutions. It was shown that at a given molecular mass and at close pH values, the increase in the number of N-[3-(dimethylamino)propyl]methacrylamide units led to an increase in phase separation temperatures.

Copolymers with Nonblocky Sequences as Novel Materials with Finely Tuned Properties

The copolymer sequence can be considered as a new tool to shape the resulting system properties on demand. This perspective is devoted to copolymers with "partially segregated" (or nonblocky) sequences. Such copolymers include gradient copolymers and copolymers with random sequences as well as copolymers with precisely controlled sequences. We overview recent developments in the synthesis of these systems as well as new findings regarding their properties, in particular, self-assembly in solutions and in melts. An emphasis is put on how the microscopic behavior of polymer chains is influenced by the chain sequences. In addition to that, a novel class of approaches allowing one to efficiently tackle the problem of copolymer chain sequence design─data driven methods (artificial intelligence and machine learning)─is discussed.

"Smart" drug delivery: A window to future of translational medicine

Chemotherapy is the mainstay of cancer treatment today. Chemotherapeutic drugs are non-selective and can harm both cancer and healthy cells, causing a variety of adverse effects such as lack of specificity, cytotoxicity, short half-life, poor solubility, multidrug resistance, and acquiring cancer stem-like characteristics. There is a paradigm shift in drug delivery systems (DDS) with the advent of smarter ways of targeted cancer treatment. Smart Drug Delivery Systems (SDDSs) are stimuli responsive and can be modified in chemical structure in response to light, pH, redox, magnetic fields, and enzyme degradation can be future of translational medicine. Therefore, SDDSs have the potential to be used as a viable cancer treatment alternative to traditional chemotherapy. This review focuses mostly on stimuli responsive drug delivery, inorganic nanocarriers (Carbon nanotubes, gold nanoparticles, Meso-porous silica nanoparticles, quantum dots etc.), organic nanocarriers (Dendrimers, liposomes, micelles), antibody-drug conjugates (ADC) and small molecule drug conjugates (SMDC) based SDDSs for targeted cancer therapy and strategies of targeted drug delivery systems in cancer cells.

A Review of Polymeric Micelles and Their Applications

Self-assembly of amphiphilic polymers with hydrophilic and hydrophobic units results in micelles (polymeric nanoparticles), where polymer concentrations are above critical micelle concentrations (CMCs). Recently, micelles with metal nanoparticles (MNPs) have been utilized in many bio-applications because of their excellent biocompatibility, pharmacokinetics, adhesion to biosurfaces, targetability, and longevity. The size of the micelles is in the range of 10 to 100 nm, and different shapes of micelles have been developed for applications. Micelles have been focused recently on bio-applications because of their unique properties, size, shape, and biocompatibility, which enhance drug loading and target release in a controlled manner. This review focused on how CMC has been calculated using various techniques. Further, micelle importance is explained briefly, different types and shapes of micelles are discussed, and further extensions for the application of micelles are addressed. In the summary and outlook, points that need focus in future research on micelles are discussed. This will help researchers in the development of micelles for different applications.