Anomalous Rheological Behavior of Dendritic Nanoparticle/Linear Polymer Nanocomposites

Rationalizing the Dependence of Poly (Vinylidene Difluoride) (PVDF) Rheological Performance on the Nano-Silica

Research on the rheological performance and mechanism of polymer nanocomposites (PNCs), mainly focuses on non-polar polymer matrices, but rarely on strongly polar ones. To fill this gap, this paper explores the influence of nanofillers on the rheological properties of poly (vinylidene difluoride) (PVDF). The effects of particle diameter and content on the microstructure, rheology, crystallization, and mechanical properties of PVDF/SiO₂ were analyzed, by TEM, DLS, DMA, and DSC. The results show that nanoparticles can greatly reduce the entanglement degree and viscosity of PVDF (up to 76%), without affecting the hydrogen bonds of the matrix, which can be explained by selective adsorption theory. Moreover, uniformly dispersed nanoparticles can promote the crystallization and mechanical properties of PVDF. In summary, the viscosity regulation mechanism of nanoparticles for non-polar polymers, is also applicable to PVDF, with strong polarity, which is of great value for exploring the rheological behavior of PNCs and guiding the process of polymers.

Simultaneous Effects of Carboxyl Group-Containing Hyperbranched Polymers on Glass Fiber-Reinforced Polyamide 6/Hollow Glass Microsphere Syntactic Foams

The hollow glass microsphere (HGM) containing polymer materials, which are named as syntactic foams, have been applied as lightweight materials in various fields. In this study, carboxyl group-containing hyperbranched polymer (HBP) was added to a glass fiber (GF)-reinforced syntactic foam (RSF) composite for the simultaneous enhancement of mechanical and rheological properties. HBP was mixed in various concentrations (0.5–2.0 phr) with RSF, which contains 23 wt% of HGM and 5 wt% of GF, and the rheological, thermal, and mechanical properties were characterized systematically. As a result of the lubricating effect of the HBP molecule, which comes from its dendritic architecture, the viscosity, storage modulus, loss modulus, and the shear stress of the composite decreased as the HBP content increased. At the same time, because of the hydrogen bonding among the polymer, filler, and HBP, the compatibility between filler and the polymer matrix was enhanced. As a result, by adding a small amount (0.5–2.0 phr) of HBP to the RSF composite, the tensile strength and flexural modulus were increased by 24.3 and 9.7%, respectively, and the specific gravity of the composite was decreased from 0.948 to 0.917. With these simultaneous effects on the polymer composite, HBP could be potentially utilized further in the field of lightweight materials.

Bio-inspired surface modification of iron oxide nanoparticles for active stabilization in hydrogels

Biological materials employ a variety of dynamic interactions in sophisticated composite structures to function adaptively on different time and length scales. Inspired by such designs we develop a novel surface modification approach to promote dynamic interactions between nanoparticles and polymer chains in physical and double network hydrogels. Physical hydrogels are formed via reversible complexation of borate ions with poly(vinyl alcohol) (PVA) and chemical crosslinks are introduced by electron beam irradiation. Dopamine is used for surface modification of magnetic iron oxide nanoparticles (MNPs) in two different ways: the direct treatment results in anchoring via catechol groups, whereas the indirect method leaves the catechol group on the free surface of MNPs. Although the former particles show very good colloidal stability, they lower the network connectivity, which results in lower plateau modulus, faster terminal relaxation, and lower yield stress, presumably due to imposing an extra distance between PVA chains. In contrast to this passive design, the latter particles actively reinforce the network by forming clusters of physical bonds between catechol groups of the individual particles and the monodiol complexes of the borate ions and PVA chains. Moreover, the additional complexes formed upon the introduction of nanoparticles with active surfaces provide further energy dissipation potential and therefore enhance the toughness. This approach can help develop novel hydrogels with superior toughness and multiple stimuli-responsiveness.

An unexpected N-dependence in the viscosity reduction in all-polymer nanocomposite

Adding small nanoparticles (NPs) into polymer melt can lead to a non-Einstein-like decrease in viscosity. However, the underlying mechanism remains a long-standing unsolved puzzle. Here, for an all-polymer nanocomposite formed by linear polystyrene (PS) chains and PS single-chain nanoparticles (SCNPs), we perform large-scale molecular dynamics simulations and experimental rheology measurements. We show that with a fixed (small) loading of the SCNP, viscosity reduction (VR) effect can be largely amplified with an increase in matrix chain length \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}N, and that the system with longer polymer chains will have a larger VR. We demonstrate that such \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$N$$\end{document}N-dependent VR can be attributed to the friction reduction experienced by polymer segment blobs which have similar size and interact directly with these SCNPs. A theoretical model is proposed based on the tube model. We demonstrate that it can well describe the friction reduction experienced by melt polymers and the VR effect in these composite systems.

Addition of small nanoparticles into polymer melt can lead to decrease in viscosity but the underlying mechanism for such viscosity reduction remains unclear. Here, the authors investigate the reduction in viscosity by large-scale molecular dynamics simulation and experimental rheology measurements for an all-polymer nanocomposite formed by linear polystyrene chains and PS single-chain nanoparticle.

Tuning the Relaxation of Nanopatterned Polymer Films with Polymer-Grafted Nanoparticles: Observation of Entropy-Enthalpy Compensation

Polymer films provide a versatile platform in which complex functional relief patterns can be thermally imprinted with a resolution down to few nanometers. However, a practical limitation of this method is the tendency for the imprinted patterns to relax ("slump"), leading to loss of pattern fidelity over time. While increasing temperature above glass transition temperature ( Tg) accelerates the slumping kinetics of neat films, we find that the addition of polymer-grafted nanoparticles (PGNP) can greatly enhance the thermal stability of these patterns. Specifically, increasing the concentration of poly(methyl methacrylate) (PMMA) grafted titanium dioxide (TiO2) nanoparticles in the composite films slows down film relaxation dynamics, leading to enhanced pattern stability for the temperature range that we investigated. Interestingly, slumping relaxation time is found to obey an entropy-enthalpy compensation (EEC) relationship with varying PGNP concentration, similar to recently observed relaxation of strain-induced wrinkling in glassy polymer films having variable film thickness. The compensation temperature,  Tcomp was found to be in the vicintity of the bulk  Tg of PMMA. Our results suggest a common origin of EEC relaxation in patterned polymer thin films and  nanocomposites.

Nanoparticle-polymer interfacial layer properties tune fragility and dynamic heterogeneity of athermal polymer nanocomposite films

Enthalpic interactions at the interface between nanoparticles and matrix polymers are known to influence various properties of the resultant polymer nanocomposites (PNC). For athermal PNCs, consisting of grafted nanoparticles embedded in chemically identical polymers, the role and extent of the interface layer (IL) interactions in determining the properties of the nanocomposites are not very clear. Here, we demonstrate the influence of the interfacial layer dynamics on the fragility and dynamical heterogeneity (DH) of athermal and glassy PNCs. The IL properties are altered by changing the grafted to matrix polymer size ratio, f, which in turn changes the extent of matrix chain penetration into the grafted layer, λ. The fragility of PNCs is found to increase monotonically with increasing entropic compatibility, characterised by increasing λ. Contrary to observations in most polymers and glass formers, we observe an anti-correlation between the dependence on IL dynamics of fragility and DH, quantified by the experimentally estimated Kohlrausch-Watts-Williams parameter and the non-Gaussian parameter obtained from simulations.

Translational and rotational dynamics of an ultra-thin nanorod probe particle in linear polymer melts

Translational and rotational dynamics of a single rigid ultra-thin nanorod probe particle in linear polymer melts are investigated using coarse-grained molecular dynamics (CG-MD) simulations.

Toward Maximizing the Mechanical Property of Interconnected Macroporous Polystyrenes Made from High Internal Phase Emulsions

Macroporous materials polymerized from high internal phase emulsions (PolyHIPEs) possess well-defined interconnected porous structures and tunable device shapes. This provides interesting property characteristics well-suited for a variety of applications. However, such materials also demonstrate poor mechanical performances, which limit their potential use. As will be demonstrated, this results from the high surfactant content required by PolyHIPEs. Herein, a new approach is introduced for designing a highly efficient polymeric surfactant, which generates interconnected pores in PolyHIPEs through designing an incompatible surfactant and skeleton material. The surfactant also possesses a hyperbranched topology, which combines the strong amphipathy of small molecular surfactants and the nanosphere structure of Pickering emulsifiers to provide an excellent colloidal stability to HIPEs. A hyperbranched polyethylene having pendant sodium sulfonate groups (HBPE-SO₃Na) was thus designed and synthesized via chain walking copolymerization of ethylene and 2-trimethylsilyloxyethyl acrylate followed by sulfonation. Stable HIPEs of styrene/divinylbenzene and water at a weight ratio of 1 to 5 were obtained with using HBPE-SO₃Na. The polymerization of HIPEs produced interconnected macroporous polystyrenes (PSs) at a substantially lower surfactant content, for example, 0.5 wt % HBPE-SO₃Na. The compressive Young's moduli of PolyHIPEs reached 104-111 MPa with 0.5-2 wt % HBPE-SO₃Na, which is the first reported case of a PS-based PolyHIPE achieving its theoretical modulus. The PolyHIPE was used to support Au nanoparticles and embed in a column for oxidation of dimethylphenylsilane. A complete conversion of dimethylphenylsilanol was achieved with low column back pressure in a 50 h continuous reaction with no degradation of PolyHIPE integrity and mechanical property.