Phenanthrodithiophene–Isoindigo Copolymers: Effect of Side Chains on Their Molecular Order and Solar Cell Performance

Impact of Donor-Acceptor Interaction and Solvent Additive on the Vertical Composition Distribution of Bulk Heterojunction Polymer Solar Cells

The vertical composition distribution of a bulk heterojunction (BHJ) photoactive layer is known to have dramatic effects on photovoltaic performance in polymer solar cells. However, the vertical composition distribution evolution rules of BHJ films are still elusive. In this contribution, three BHJ film systems, composed of polymer donor PBDB-T, and three different classes of acceptor (fullerene acceptor PCBM, small-molecule acceptor ITIC, and polymer acceptor N2200) are systematically investigated using neutron reflectometry to examine how donor-acceptor interaction and solvent additive impact the vertical composition distribution. Our results show that those three BHJ films possess homogeneous vertical composition distributions across the bulk of the film, while very different composition accumulations near the top and bottom surface were observed, which could be attributed to different repulsion, miscibility, and phase separation between the donor and acceptor components as approved by the measurement of the donor-acceptor Flory-Huggins interaction parameter χ. Moreover, the solvent additive 1,8-diiodooctane (DIO) can induce more distinct vertical composition distribution especially in nonfullerene acceptor-based BHJ films. Thus, higher power conversion efficiencies were achieved in inverted solar cells because of facilitated charge transport in the active layer, improved carrier collection at electrodes, and suppressed charge recombination in BHJ solar cells.

N-Alkylation vs. O-alkylation: influence on the performance of the photovoltaic cells based on a tetracyclic lactam polymer donor

Lactam-containing acceptors, which could provide two potential alkylation positions (N-alkylation and O-alkylation), are important building blocks for polymeric donors in high performance polymer solar cells (PSCs). However, the influence of alkylation positions on the PSC performance has seldom been studied. Herein, we investigated the influence of O-alkylation and N-alkylation on a novel bislactam acceptor, namely dibenzonaphthyridinedione (DBND), on the physical properties of the corresponding polymers and hence their PSC performance. Besides O-alkylated and N-alkylated DBND, half-N-alkylated-half-O-alkylated DBND (N,O-DBND) was also prepared and copolymerized with stannyl bithiophene (2T). It was found that by varying the alkylation positions, the optical, crystalline and aggregation properties of the corresponding polymers were greatly altered. In comparison with P(N-DBND-2T) and P(O-DBND-2T), P(N,O-DBND-2T) shows both better solubility and shorter π–π stacking distance. By blending with PC₇₁BM, P(N,O-DBND-2T) forms better nano-fibrillar phase separation so that less charge recombination is observed, thus leading to a much better power conversion efficiency (PCE) around 5%, which is the highest value of the conjugated system based on N,O-alkylated acceptors. The results show that the asymmetric N,O-alkylation protocol is a promising way to adjust the properties of the bislactam-containing conjugated polymers.

The alkylation positions (N-alkylation & O-alkylation) of a bis-lactam containing acceptor has a strong influence on the solar cell performance of the corresponding polymers.

Organic photovoltaics of diketopyrrolopyrrole copolymers with unsymmetric and regiorandom configuration of the side units

Diketopyrrolopyrrole (DPP) is a representative electron acceptor incorporated into narrow-bandgap polymers for organic photovoltaic cells (OPV). Commonly, identical aromatic units are attached to the sides of the DPP unit, forming symmetric DPP polymers. Herein we report the synthesis and characterization of DPP copolymers consisting of unsymmetric configurations of the side aromatics. The unsymmetric DPP copolymer with thienothiophene and benzene side moieties exhibits good solubility owing to the twisted dihedral angle at benzene and regiorandom configuration. A significant shallowing of the highest occupied molecular orbital level is observed in accordance with the electron-donating nature of the side units (benzene, thiophene, and thienothiophene). The overall power conversion efficiencies of the unsymmetric DPPs (2.3–2.4%) are greater than that of the centrosymmetric analogue (0.45%), which is discussed in view of bulk heterojunction morphology, polymer crystallinity, and space-charge-limited current mobilities. This comparative study highlights the effect of unsymmetric design on the molecular stacking and OPV performance of DPP copolymers.

Diketopyrrolopyrroles with unsymmetric side aromatics of benzene and (thiophene or thienothiophene) were copolymerized with 2-dimensional benzodithiophene, and their solar cell devices were characterized.

A polymer electron donor based on isoindigo units bearing branched oligo(ethylene glycol) side chains for polymer solar cells

The oligo(ethylene glycol) side chains make the polymer donor exhibit good compatibility with PC₇₁BM and consequently show good photovoltaic performance.

Design directed self-assembly of donor-acceptor polymers

Donor-acceptor polymers with an alternating array of donor and acceptor moieties have gained particular attention during recent years as active components of organic electronics. By implementation of suitable subunits within the conjugated backbone, these polymers can be made either electron-deficient or -rich. Additionally, their band gap and light absorption can be precisely tuned for improved light-harvesting in solar cells. On the other hand, the polymer design can also be modified to encode the desired supramolecular self-assembly in the solid-state that is essential for an unhindered transport of charge carriers. This review focuses on three major factors playing a role in the assembly of donor-acceptor polymers on surfaces which are (1) nature, geometry and substitution position of solubilizing alkyl side chains, (2) shape of the conjugated polymer defined by the backbone curvature, and (3) molecular weight which determines the conjugation length of the polymer. These factors adjust the fine balance between attractive and repulsive forces and ensure a close polymer packing important for an efficient charge hopping between neighboring chains. On the microscopic scale, an appropriate domain formation with a low density of structural defects in the solution deposited thin film is crucial for the charge transport. The charge carrier transport through such thin films is characterized by field-effect transistors as basic electronic elements.

Synthesis and characterization of acceptor–donor–acceptor-based low band gap small molecules containing benzoselenadiazole

Acceptor–donor–acceptor-type compounds 5′,5″-(benzo[c][1,2,5]selenadiazole-4,7-diyl)bis(3′-dodecyl-2,2′-bithiophene-5-carbonitrile) (9) and 4,4′-(5,5′-(benzo[c][1,2,5]selenadiazole-4,7-diyl)bis(3-dodecylthiophene-5,2-diyl))dibenzonitrile (10) were designed and synthesized. These compounds differ in terminal positions, compound 9 with a thiophene-containing nitrile group and compound 10 with a phenyl-containing nitrile group. Both compounds have shown good thermal stability and low band gap. The band gaps of compounds 9 and 10 were 1.74 and 1.83 eV, respectively. These results indicate that they are promising materials for use in optoelectronics.

Impact of the Crystalline Packing Structures on Charge Transport and Recombination via Alkyl Chain Tunability of DPP-Based Small Molecules in Bulk Heterojunction Solar Cells

A series of small compound materials based on benzodithiophene (BDT) and diketopyrrolopyrrole (DPP) with three different alkyl side chains were synthesized and used for organic photovoltaics. These small compounds had different alkyl branches (i.e., 2-ethylhexyl (EH), 2-butyloctyl (BO), and 2-hexyldecyl (HD)) attached to DPP units. Thin films made of these compounds were characterized and their solar cell parameters were measured in order to systematically analyze influences of the different side chains of compounds on the film microstructure, molecular packing, and hence, charge-transport and recombination properties. The relatively shorter side chains in the small molecules enabled more ordered packing structures with higher crystallinities, which resulted in higher carrier mobilities and less recombination factors; the small molecule with the EH branches exhibited the best semiconducting properties with a power conversion efficiency of up to 5.54% in solar cell devices. Our study suggested that tuning the alkyl chain length of semiconducting molecules is a powerful strategy for achieving high performance of organic photovoltaics.

Benzobisthiadiazole-alt-bithiazole copolymers with deep HOMO levels for good-performance field-effect transistors with air stability and a high on/off ratio

Two benzobisthiadiazole-alt-bithiazole copolymers were designed and synthesized, and the resulting transistors achieved high performance with air stability and a high on/off ratio.

Highly crystalline, low band-gap semiconducting polymers based on phenanthrodithiophene-benzothiadiazole for solar cells and transistors

Newly developed PDT-benzothiadiazole copolymers formed highly-crystalline films in a highly ordered edge-on manner. As a result, fabricated solar cells and transistor devices showed a moderate PCE of ∼3.8% and a high hole mobility of up to 0.18 cm² V⁻¹ s⁻¹.