Hydration of Hydrophobic Iron–Carbonyl Homopolymers via Water–Carbonyl Interaction (WCI): Creation of Uniform Organometallic Aqueous Vesicles with Exceptionally High Encapsulation Capacity

Ultrafast absorption mechanism of oil-emulsified micelles onto ferrous absorbents with dielectrophoresis force in the presence of polarization

Absorption and desorption rates were generally dependent on the concentration gradient from bulk to absorbents. A novel methodology based on a capacitor with an alternating electric field (AEF) is developed to accelerate the absorption and desorption rates with the frequency manipulation. Ferrous polystyrene microspheres (PISMs) are synthesized as absorbents, which could enhance the complex permittivities as well as dielectric properties. Theoretically, the attractive force and viscous force predominately determine the particle and micelles movement in the medium under an AEF. Oil-emulsified micelles (OEM) with various viscosities were selected as absorbates. Both the OEM and microspherical absorbents assembled through the external attractive force in the presence of the AEF. When the attractive force is equal to viscous force in the medium at the characteristic frequency, the optimal absorption rate could be obtained. The absorption rate constants of pseudo-first-order for OEMs under the polarization at 50 V and 120 kHz of frequency are ca. 10 times higher than that in absence of the polarization. The desorption rate as well as recycling efficiency could be also improved at 800 kHz. The ferrous PISMs with high complex permittivity prevented the damage from the AEF, which could be recycled 10 times of absorption and desorption with frequency manipulation under the AEF. Our methodology provides novel insights for ultrafast wastewater treatment.

Kinetically Controlled Star Copolymer Self-Assembly for Rapid Fabrication of Nanoparticles with High Encapsulation Capacity

Rapid and scalable self-assembly of an amphiphilic 21-arm star copolymer, (polystyrene-block-polyethylene glycol)21 [(PS-b-PEG)21 ] in aqueous solution has been performed by reverse solvent exchange procedure. Transmission electron microscope (TEM) and nanoparticle tracking analysis (NTA) reveal the formation of nanoparticles with narrow size distribution. Further investigation indicates a kinetically controlled self-assembly mechanism of the copolymers, in which the star topology of the amphiphilic copolymer and deep quenching condition by reverse solvent exchange are key to accelerate intrachain contraction of the copolymer during phase separation. When interchain contraction dominant over interchain association, nanoparticles with low aggregation number could be formed. Thanks to the high hydrophobic contents of the (PS-b-PEG)21 polymers, the resulted nanoparticles could encapsulate a high capacity of hydrophobic cargo up to 19.84 %. The kinetically controlled star copolymer self-assembly process reported here provides a platform for the rapid and scalable fabrication of nanoparticle with high drug loading capacity (LC), which may find broad range of applications in, for example drug delivery, nanopesticide.

The effect of hydration and dehydration on the conformation, assembling behavior and photoluminescence of PBLG

Hydration and dehydration play crucial roles in hydrophobic effects (HEs) and are yet to be understood. Poly(γ-benzyl-L-glutamate) (PBLG) homopolymers in THF/water with various water contents were investigated. We discovered that PBLG was hydrated at low water contents and adopted a helical conformation. The chain became dehydrated with increasing water content, which converted the PBLG₁₀₀ helix to a PPII-helix. The variation in the conformation resulted in an alteration of the self-assembled morphologies from fibers to particles. For PBLG₁₂ with a shorter chain, the chain underwent an α-to-β transition in the conformation due to dehydration as the water content increased, and correspondingly the morphologies varied from tapes to helical ribbons, and eventually to toroids at a higher water content. We also observed that this α-to-β transition is accompanied by an increase in intensity of the fluorescence, which is attributed to the through-space-conjugation of tightly packed phenyl groups within the β-sheet. The discovered effect of hydration and dehydration on the PBLG chain conformation, self-assembling behavior and optical function is essential for the innovation of polypeptide materials and understanding of water-mediated biological systems.

Design and applications of metallo-vesicular structures using inorganic-organic hybrids

In advanced biomedical diagnosis, various supramolecular assemblies based on inorganic-organic hybrids have found great interest as functional materials. These assemblies describe a new field of metallovesicles where the introduction of metal ions enables the chemical manipulation of assemblies in terms of their structural stability, redox activity, and pH stability. Additionally, they mimic the elaborative architecture of natural liposomal assemblies and exhibit hierarchical morphologies, and promise novel functions. With the constant developments in this field, various supramolecular assemblies such as MCsomes, Polymersomes, and Metallosomes, etc. came into existence. These hybrid assemblies have been utilized for several applications such as drug delivery, MRI contrasting, DNA delivery, and catalytic activity. The key advantage of these assemblies is their ability to deliver therapeutics to specific locations due to their biomimetic properties and release their contents at the desired time. Hence, they provide a valuable platform for the treatment of a variety of diseases. Through the present article, we intend to provide insights into the latest developments made in this field. This modularity underscores the tremendous promise of supramolecular assemblies as an emerging interdisciplinary research branch at the interface of chemistry and biological sciences.

Aqueous Self-Assembly of Hydrophobic Molecules Influenced by the Molecular Geometry

Water, in addition to acting as a solvent, plays a constructional role in aqueous self-assembly. The hydrophobic molecule of POSS-PDI-POSS (POSS = polyhedral oligomeric silsesquioxanes, PDI = perylene diimide) has a shape anisotropy in which POSS is a ball-like bulky group and PDI is a flat aromatic group. The self-assembly of this molecule in water created assemblies with inner spaces due to the steric effect, which suppressed aromatic interactions of PDI and trapped water for the colloidal stability. By replacing POSS with dodecyl (C₁₂), C₁₂-PDI-C₁₂ aggregated with extended aromatic interaction of PDI and less inner water. The resulting aggregates tended to agglomerate and precipitate. This discovery extended the scope of aqueous self-assembly by using the building blocks without amphiphilicity and created knowledge for biophysics.

Regulating the morphology and size of homopolypeptide self-assemblies via selective solvents

It remains a great challenge to control the morphology and size of self-assembled homopolypeptide aggregates. In this work, rod-like micelles including spindles and cylinders were prepared by a solution self-assembly of poly(γ-benzyl-l-glutamate) (PBLG) homopolypeptides with different degrees of polymerization, in which their size was controlled precisely by tuning the ratio of water/methanol in selective cosolvents. The length of the rod-like micelles increased with an increasing amount of methanol in the selective cosolvents, which was confirmed using the combination of SEM, TEM and AFM. The self-assembly mechanism of PBLG in selective cosolvents was investigated by using complementary Fourier transform infrared (FT-IR), circular dichroism (CD) and low-field NMR analyses. It was found that the shrinkage and swelling of PBLG chains play important roles in the self-assembly process. The obtained results may provide a guideline for the study of regulating the assembled aggregate sizes.

Aqueous self-assembly of hydrophobic macromolecules with adjustable rigidity of the backbone

P(FpC₃P) (Fp: CpFe(CO)₂; C₃P: propyl diphenyl phosphine) has a helical backbone, resulting from piano stool metal coordination geometry, which is rigid with intramolecular aromatic interaction of the phenyl groups. The macromolecule is hydrophobic, but the polarized CO groups can interact with water for aqueous self-assembly. The stiffness of P(FpC₃P), which is adjustable by temperature, is an important factor influencing the morphologies of kinetically trapped assemblies. P(FpC₃P)₇ self-assembles in DMSO/water (10/90 by volume) into lamellae at 25 °C, vesicles at 40 °C and irregular aggregates at higher temperatures (60 and 70 °C). The colloidal stability decreases in the order of lamellae, vesicles and irregular aggregates. Dissipative particle dynamics (DPD) simulation reveals the same temperature-dependent self-assembled morphologies with an interior of hydrophobic aromatic groups covered with the metal coordination units. The rigid backbone at 25 °C accounts for the formation of the layered morphology, while the reduced rigidity of the same P(FpC₃P)₇ at 40 °C curves up the lamellae into vesicles. At a higher temperature (60 or 70 °C), P(FpC₃P)₇ behaves as a random coil without obvious amphiphilic segregation, resulting in irregular aggregates. The stiffness is, therefore, a crucial factor for the aqueous assembly of macromolecules without obvious amphiphilic segregation, which is reminiscent of the solution behavior observed for many hydrophobic biological macromolecules such as proteins.

Flexibility and Stability of Metal Coordination Macromolecules

The effect of chain structure on flexibility and stability of macromolecules containing weak P-Fe metal coordination bonds is studied. Migration insertion polymerization (MIP) of FpC_X Fp (1) and PR₂ C_Y PR₂ (2) (Fp: CpFe(CO)₂ ; C_X and C_Y : alkyl spacers; P: phosphine; R: phenyl or isopropyl) generates P(1/2), in which the P-Fe and Fe-P bonds with opposite bonding direction are alternatively arranged in the backbone. On the other hand, P(FpC_X P) synthesized from AB-type monomers (FpC_X P) has P-Fe bonds arranged in the same direction. P(1/2) is more rigid and stable than P(FpC_X P), which is attributed to the chain conformation resulting from the P-Fe bonding direction. In addition, the longer spacers render P(1/2) relatively flexible; the phenyl substituents, as compared with the isopropyl groups, improves the rigidity, thermal, and solution stability of P(1/2). It is therefore possible to incorporate weak metal coordination bonds into macromolecules with improved stability and adjustable flexibility for material processing.

Synthesis of Air-Stable Cyclopentadienyl Fe(CO)2 (Fp) Polymers by a Host-Guest Interaction of Cyclodextrin with Air-Sensitive Fp Pendant Groups

Host-guest chemistry is used to address the challenge of the synthesis of air-stable polymers containing air-sensitive metal complexes. The complexation of the CpFe(CO)₂ (Fp) pendent group with cyclodextrin (CD) molecules created air-stable poly(Fp-methylstyrene) P(CD/FpMSt). This CD complexation resulted in dimerization of the adjacent Fp groups, which was characterized by NMR, FTIR, and cyclic voltammetry (CV) analyses. P(CD/FpMSt) was soluble in DMSO and remained stable even the solution was exposed to air for months. The host-guest chemistry accounted for the improved stability, because the Fp groups decomposed upon removal of the CD molecules using competing guest molecules. The CD-complexed polymer showed light-trigged properties, including CO release and antimicrobial activity. Host-guest chemistry of air-sensitive organometallic complexes is therefore a promising technique that can be used to broaden the scope of metal-containing polymers (MCPs) with processable novel functions.