Preparation and Self-Assembly of Supramolecular Coil–Rod–Coil Triblock Copolymer PPO–dsDNA–PPO

Dilational Rheology of Extended Surfactants at the Air/Water and Oil/Water Interfaces: Effect of Propylene Oxide Group Numbers

In this paper, the interfacial properties of extended surfactants with different oxypropylene (PO) groups were comprehensively investigated by using interfacial dilational rheology. The differences in molecular orientation, spatial configuration, and relaxation process were compared at the gas-water interface and oil-water interface. The influences of the PO groups on the interface viscoelasticity were analyzed, providing important theoretical support for the wide application of extended surfactants. Experimental results show that the lower number of PO groups in extended surfactants does not cause differences in their presence states on the interface; however, once it increases, the longer PO segment will spiral up in the direction perpendicular to the interface, forming a spatial configuration like a thin cylinder. Compared with air, the PO group has better solubility in the oil phase. The chain segment can still maintain a helical extension from the beginning to the end as a result. However, the upper layer of the thin cylinder will collapse to a certain extent at the surface. Moreover, the orientation of the hydrophobic side has a dynamic process of "tilting to upright" with the increase of adsorption amount or in response to interfacial dilation and compression. The increase of PO number or the insertion of oil molecules has little effect on dilational modulus, and the interfacial film strength is generally relatively low. That is to say, the better emulsifying and solubilizing ability of PO-containing extended surfactants may be more attributed to the matching steric effect at interface or better packing action in bulk phase than to higher film strength.

Polymers Strive for Accuracy: From Sequence-Defined Polymers to mRNA Vaccines against COVID-19 and Polymers in Nucleic Acid Therapeutics

Unquestionably, polymers have influenced the world over the past 100 years. They are now more crucial than ever since the COVID-19 pandemic outbreak. The pandemic paved the way for certain polymers to be in the spotlight, namely sequence-defined polymers such as messenger ribonucleic acid (mRNA), which was the first type of vaccine to be authorized in the U.S. and Europe to protect against the SARS-CoV-2 virus. This rise of mRNA will probably influence scientific research concerning nucleic acids in general and RNA therapeutics in specific. In this Perspective, we highlight the recent trends in sequence-controlled and sequence-defined polymers. Then we discuss mRNA vaccines as an example to illustrate the need of ultimate sequence control to achieve complex functions such as specific activation of the immune system. We briefly present how mRNA vaccines are produced, the importance of modified nucleotides, the characteristic features, and the advantages and challenges associated with this class of vaccines. Finally, we discuss the chances and opportunities for polymer chemistry to provide solutions and contribute to the future progress of RNA-based therapeutics. We highlight two particular roles of polymers in this context. One represents conjugation of polymers to nucleic acids to form biohybrids. The other is concerned with advanced polymer-based carrier systems for nucleic acids. We believe that polymers can help to address present problems of RNA-based therapeutic technologies and impact the field beyond the COVID-19 pandemic.

Functional DNA-Polymer Conjugates

DNA nanotechnology has seen large developments over the last 30 years through the combination of solid phase synthesis and the discovery of DNA nanostructures. Solid phase synthesis has facilitated the availability of short DNA sequences and the expansion of the DNA toolbox to increase the chemical functionalities afforded on DNA, which in turn enabled the conception and synthesis of sophisticated and complex 2D and 3D nanostructures. In parallel, polymer science has developed several polymerization approaches to build di- and triblock copolymers bearing hydrophilic, hydrophobic, and amphiphilic properties. By bringing together these two emerging technologies, complementary properties of both materials have been explored; for example, the synthesis of amphiphilic DNA-polymer conjugates has enabled the production of several nanostructures, such as spherical and rod-like micelles. Through both the DNA and polymer parts, stimuli-responsiveness can be instilled. Nanostructures have consequently been developed with responsive structural changes to physical properties, such as pH and temperature, as well as short DNA through competitive complementary binding. These responsive changes have enabled the application of DNA-polymer conjugates in biomedical applications including drug delivery. This review discusses the progress of DNA-polymer conjugates, exploring the synthetic routes and state-of-the-art applications afforded through the combination of nucleic acids and synthetic polymers.

The Martini Model in Materials Science

The Martini model, a coarse-grained force field initially developed with biomolecular simulations in mind, has found an increasing number of applications in the field of soft materials science. The model's underlying building block principle does not pose restrictions on its application beyond biomolecular systems. Here, the main applications to date of the Martini model in materials science are highlighted, and a perspective for the future developments in this field is given, particularly in light of recent developments such as the new version of the model, Martini 3.

From DNA Nanotechnology to Material Systems Engineering

In the past 35 years, DNA nanotechnology has grown to a highly innovative and vibrant field of research at the interface of chemistry, materials science, biotechnology, and nanotechnology. Herein, a short summary of the state of research in various subdisciplines of DNA nanotechnology, ranging from pure "structural DNA nanotechnology" over protein-DNA assemblies, nanoparticle-based DNA materials, and DNA polymers to DNA surface technology is given. The survey shows that these subdisciplines are growing ever closer together and suggests that this integration is essential in order to initiate the next phase of development. With the increasing implementation of machine-based approaches in microfluidics, robotics, and data-driven science, DNA-material systems will emerge that could be suitable for applications in sensor technology, photonics, as interfaces between technical systems and living organisms, or for biomimetic fabrication processes.

What dominates the interfacial properties of extended surfactants: Amphipathicity or surfactant shape?

HYPOTHESIS

The properties of conventional surfactants (c-surfactants) are generally accepted to be amphipathicity-dominated, but extended surfactants (e-surfactants) are additionally polypropylene oxide (PPO)-dependent; this additional property makes us wonder how an intramolecular PPO spacer would be "extended" at various interfaces and what is responsible for the excellent all-round properties of e-surfactants.

EXPERIMENTS

A series of novel sodium medium alkyl chain PPO-b-PEO sulfates (2-ethylhexyl polypropylene oxide-block-polyethylene oxide sulfates, C₈P_pE_eS) were designed, synthesized and structurally identified. Tensiometry was applied to estimate the surfactant shape at the air/water surface. Surface tension, interfacial tension, emulsifying power, electrolyte tolerance, adsorption onto oil sands and thermal hydrolysis stability were measured to evaluate the effect of the PPO coil on the interfacial and micellar properties of the e-surfactants.

FINDINGS

On the basis of obtaining greater values for e-surfactants than c-surfactants for both surface area (a_m) per surfactant molecule and the corresponding shape factor (S), we were surprised to find that e-surfactants form a rugby ball shape not only at the air/water surface but also at the oil/water interface; this result is potentially explained by the PPO spacer coiling and collapsing to produce dense packing at the monolayer adsorption, which is rationally borrowed by other interfaces. Many positive or negative correlations were observed between the interfacial/micellar properties of C₈P_pE_eS and a_m values, which seems that the surfactant shape dominants the properties of the e-surfactants. In fact, the properties of C₈P_pE_eS are dominated by the dynamic amphipathicity and assisted by the rugby ball shape of the molecules because of both being driven by the dynamic biphasic affinity of the PPO coil in response to the external environment; these findings provide soft interfacial materials specially adapted for surfactant flooding.

Comparative Study of Conventional/Ethoxylated/Extended n-Alkylsulfate Surfactants

A series of novel anionic e-surfactants n-C _cP _pS was molecular designed and synthesized from long-chain fatty alcohols by polypropoxylation and sulfation followed by neutralization. Excellent all-round performance of extended surfactants (e-surfactants) interests us how a simple polypropylene oxide (PPO) spacer has great effects on properties. By a comparative study of conventional/ethoxylated/extended n-alkylsulfate surfactants, we were surprised to find that e-surfactants are in an obvious rugby shape at the air/water surface according to molecular surface area ( a_m), and it comes down to the intramolecular PPO spacer coiling and surface-induced collapse. On the basis of the interfacial properties of the e-surfactants, it is found that the PPO spacer can provide both hydrophilic and lipophilic contributions to an e-surfactant molecule. The synergism between PPO spacers and alkyl chains indicates that a certain PPO spacer can adjust the contributions in view of different alkyl chain lengths. Therefore, it is both the rugby-shaped molecular geometry of e-surfactants and the dynamic amphipathicity of a PPO spacer that makes e-surfactants behave with excellent interfacial and solution properties for household cleaning. Therefore, this work gives us a hint that the molecular geometry of surfactants plays a vital role in interfacial and solution properties similar to molecular amphipathicity.

Amphiphilic DNA Organic Hybrids: Functional Materials in Nanoscience and Potential Application in Biomedicine

Due to the addressability and programmability, DNA has been applied not merely in constructing static elegant nanostructures such as two dimensional and three dimensional DNA nanostructures but also in designing dynamic nanodevices. Moreover, DNA could combine with hydrophobic organic molecules to be a new amphiphilic building block and then self-assemble into nanomaterials. Of particular note, a recent state-of-the-art research has turned our attention to the amphiphilic DNA organic hybrids including small molecule modified DNA (lipid-DNA, fluorescent molecule-DNA, etc.), DNA block copolymers, and DNA-dendron hybrids. This review focuses mainly on the development of their self-assembly behavior and their potential application in nanomaterial and biomedicine. The potential challenges regarding of the amphiphilic DNA organic hybrids are also briefly discussed, aiming to advance their practical applications in nanoscience and biomedicine.

Self-Collapsing of Single Molecular Poly-Propylene Oxide (PPO) in a 3D DNA Network

On the basis of DNA self-assembly, a thermal responsive polymer polypropylene oxide (PPO) is evenly inserted into a rigid 3D DNA network for the study of single molecular self-collapsing process. At low temperature, PPO is hydrophilic and dispersed uniformly in the network; when elevating temperature, PPO becomes hydrophobic but can only collapse on itself because of the fixation and separation of DNA rigid network. The process has been characterized by rheological test and Small Angle X-Ray Scattering test. It is also demonstrated that this self-collapsing process is reversible and it is believed that this strategy could provide a new tool to study the nucleation-growing process of block copolymers.

Self-organization of hydrophobic-capped triblock copolymers with a polyelectrolyte midblock: a coarse-grained molecular dynamics simulation study

We present the results of a Langevin dynamics simulation study of micellar organization and hydrogel formation in the solutions of coarse-grained ABA copolymer chains. Polymer chains are modeled as bead-spring chains of Lennard-Jones particles by explicit treatment of ionic species in implicit solvent. The studied copolymer is composed of a polyelectrolyte midblock flanked by two hydrophobic endblocks. We explore the self-assembly of copolymer solutions at a fixed polymer concentration and temperature upon systematic variation of the midblock charge fraction, valency of neutralizing counterions, and the stiffness and length of hydrophobic endblocks. Minimization of the surface energy, conformational entropy of the midblock chains, electrostatic repulsion of midblock charges, and the translational entropy of counterions are found to play central roles in controlling the self-organization features of copolymer solutions. Flower-like micelles with A-blocks forming the core of spherical aggregates and B-blocks constituting the micelle corona are established for the neutral midblocks. Increasing the charge content of B chains lowers the fraction of loop conformations and yields a spanning hydrogel network with midblocks bridging the hydrophobic clusters. Counterion valence is shown to exert a strong effect on the micelle size and network structure. The increase in the rigidity of terminal A-blocks increases the fraction of bridging chains and results in the formation of a hydrogel network with bundle-like hydrophobic domains. Longer endblocks are shown to increase the hydrophobic cluster size and enhance the bridged midblock fraction. The qualitative agreement between the experimental and theoretical studies is also discussed. The comprehensive molecular picture provides a framework for the future studies of stimuli-responsive copolymer systems.