Ultrasensitive pH-Induced Water Solubility Switch Using UCST Polymers

Tailoring a UCST-LCST-pH Multiresponsive Window through a Single Polymer Complex of Chitosan-Hyaluronic Acid

Multistimuli-responsive polymers are important for controlled release. Owing to the fact that these polymers are derived from vinyl-based monomers, their decoration with other molecules is limited. Polysaccharides, especially chitosan (CS) and hyaluronic acid (HA), are pH-responsive biopolymers, whose chemical structures contain reactive functional groups for feasible chemical modifications to obtain add-on functions. The present work demonstrates the introduction of polymers with upper critical solution temperature (UCST) and lower critical solution temperature (LCST) performances onto CS and HA, respectively. By simply varying the mole ratio between the CS-containing UCST polymer and the HA-containing LCST polymer along with adjusting the pH, a polymer system with a UCST-LCST-pH multiresponsive window can be obtained. This multiresponsive window enables us to control the encapsulation and release with repeatability as evidenced from a model study on lysozyme. The present work, for the first time, shows a simple approach to obtain multiresponsive biodegradable polymers through the formation of a single polymer complex to tailor a specific multiresponsive window.

UCST-Type Polymer Capsules Formed by Interfacial Complexation

Formation of aqueous-core polymer capsules exhibiting an upper critical solution temperature (UCST) was achieved using surfactant-polymer interfacial complexation in water-in-oil inverse emulsions. In fluorinated oil, Coulombic interactions between Krytox, an anionic oil-soluble surfactant, and a cationic poly(lysine) grafted with poly(acrylamide-co-acrylonitrile) enabled the formation of an adsorbed polymer shell at the surface of water droplets. The thermoresponsiveness of the polymer shell was assessed by fluorescence microscopy with and without the presence of nanoparticles, including gold particles. We show that, above the cloud point, polymers with a balanced fraction of UCST grafts form flat adlayers that (i) spontaneously entrap nanoparticles upon cooling and (ii) switch from fluid-like dynamics at high temperature to solid-like dynamics below the cloud point. This system offers a straightforward mean to prepare temperature-sensitive capsules in mild, biocompatible conditions and to concentrate nanoparticles (including nanoheaters) in their shell.

The UCST phase transition of a dextran based copolymer in aqueous media with tunable thermoresponsive behavior

A hydrogen bonded UCST polymer has been developed by grafting of methacrylamide and acrylic acid on dextran via free radical polymerization.

Water-soluble copolymers and their hydrogels with pH-tunable diverse thermoresponsive behaviors enabled by hydrogen bonding

Water-soluble copolymers display both UCST and LCST thermosensitivity in aqueous solution due to pH-determined hydrogen bonding between comonomer units, and their hydrogels can be used for information recording and encryption/decryption.

Multiresponsive Cellulose Nanocrystal Cross-Linked Copolymer Hydrogels for the Controlled Release of Dyes and Drugs

Multiresponsive hydrogels have attracted tremendous interest due to their promising applications in tissue engineering, wearable devices, and flexible electronics. In this work, we report a multiresponsive upper critical solution temperature (UCST) composite hydrogel based on poly (acrylic acid-co-acrylamide), PAAc-co-PAAm, sequentially cross-linked by acid-hydrolysis cellulose nanocrystals (CNCs). Scanning electron microscopy (SEM) observations demonstrated that the hydrogels are formed by densely cross-linked porous structures. The PAAc/PAAm/CNC hybrid hydrogels exhibit swelling and shrinking properties that can be induced by multiple stimuli, including temperature, pH, and salt concentration. The driving force of the volume transition is the formation and dissociation of hydrogen bonds in the hydrogels. A certain content of CNCs can greatly enhance the shrinkage capability and mechanical strength of the hybrid hydrogels, but an excess addition may impair the contractility of the hydrogel. Furthermore, the hydrogels can be used as a matrix to adsorb dyes, such as methylene blue (MB), for water purification. MB may be partly discharged from hydrogels by saline solutions, especially by those with high ionic strength. Notably, through temperature-controlled hydrogel swelling and shrinking, doxorubicin hydrochloride (DOX-HCl) can be controllably adsorbed and released from the prepared hydrogels.

Aqueous Synthesis of Upper Critical Solution Temperature and Lower Critical Solution Temperature Copolymers through Combination of Hydrogen-Donors and Hydrogen-Acceptors

The synthesis of thermo-responsive polymers from non-responsive and water-soluble monomers has great practical advantages but significant challenges. Herein, the authors report a novel aqueous copolymerization strategy to prepare polymers with tunable upper critical solution temperature (UCST) or lower critical solution temperature (LCST) from non-responsive monomers. Acrylic acid (AAc), N-vinylpyrrolidone (NVP), and acrylamide (AAm) are copolymerized in water, yielding copolymers with UCST behavior. Interestingly, by simply replacing AAm with its methylated homologue, dimethyl acrylamide (DMA), the thermo-responsiveness of the copolymers is converted into LCST-type. The cloud points of the copolymers can be tuned rationally with their monomer ratios and the condition of the solvent. The UCST property of the poly(AAc-NVP-AAm) comes from the AAc-AAm and AAc-NVP hydrogen-bonds, while the LCST property of poly(AAc-NVP-DMA) originates from the hydrophobic aggregation of AAc-NVP complex and DMA, as indicated by temperature-dependent ¹ H NMR and dynamic light scattering.

A pH and UCST thermo-responsive tri-block copolymer (PAA-b-PDMA-b-P(AM-co-AN)) with micellization and gelatinization in aqueous media for drug release

A brand new pH and thermo-responsive amphiphilic ABC triblock copolymer of poly(acrylic acid)-block-poly(N,N-dimethyl acrylamide)-block-poly(acrylamide-co-acrylonitrile) (PAA-b-PDMA-b-P(AM-co-AN)) was applied as drug carrier systems.

Supramolecular Polymer Network-Mediated Structural Phase Transitions within Polymeric Micelles in Aliphatic Alcohols

Self-complementary supramolecular polymers (SCSPs), an efficient combination of sextuple hydrogen-bonded dimer moieties and a temperature-responsive polymer, can promote the construction of stable supramolecular polymer networks (SPNs) that enable the formation of well-defined nanospherical micelles in aliphatic alcohols. These micelles undergo tailorable, thermoresponsive phase transitions at the upper critical solution temperature (UCST) and have a desirable spherical morphology and size ranges, thus, are potential candidates for applications in interfacial engineering and biomedical fields. Moreover, concentration-dependent UCST measurements and variable-temperature experiments indicated that the hydrogen-bonded complexes are strong enough to form stable intermolecularly entangled SPNs within the micelles, even above the UCST or at low concentrations in solution, which enables the micelles to undergo reversible temperature-dependent conformational changes between insoluble and soluble globules without significant changes in particle size or size distribution. Thus, this newly discovered system offers a new approach toward the development of next-generation temperature-responsive SCSPs with the desired structural stability that undergoes UCST transitions.

Multiple-Responsive and Amphibious Hydrogel Actuator Based on Asymmetric UCST-Type Volume Phase Transition

Thermoresponsive hydrogel actuators have attracted tremendous interest due to their promising applications in artificial muscles, soft robotics, and flexible electronics. However, most of these materials are based on polymers with lower critical solution temperature (LCST), while those from upper critical solution temperature (UCST) are rare. Herein, we report a multiple-responsive UCST hydrogel actuator based on the complex of poly(acrylic acid) (PAAc) and poly(acrylamide) (PAAm). By applying a heterogeneous photopolymerization, a bilayer hydrogel was obtained, including a layer of the interpenetrating network (IPN) of PAAm/PAAc and a layer of a single network of PAAm. When cooled down below the UCST, the PAAm/PAAc layer contracted due to the hydrogen bonding of the two polymers while the PAAm layer stays in swelling state, driving the hydrogel to curl. By adjusting the composition of the two layers, the amplitude of actuation behavior could be regulated. By creating patterned IPN domains with photomasks, the hydrogel could deform into complex two-dimensional (2D) and three-dimensional (3D) shapes. An active motion was realized in both water and oil bath, thanks to the internal water exchange between the two layers. Interestingly, the hydrogel actuator is also responsive to urea and salts (Na₂SO₄, NaCl, NaSCN), due to that the strength of the hydrogen bonds in the IPN changes with the additives. Overall, the current study realized an anisotropic UCST transition by introducing asymmetrically distributed polymer-polymer hydrogen bonds, which would inspire new inventions of intelligent materials.

Fluorescence Tumor-Imaging Using a Thermo-Responsive Molecule with an Emissive Aminoquinoline Derivative

We synthesized (2,4-trifluoromethyl-7-N-bis(2,5,8,11-tetraoxatridecane-13-yl)-aminoquinoline) TFMAQ-diEg4, an emissive aminoquinoline derivative that incorporated two tetraethyleneglycol chains into an amino group. TFMAQ-diEg4 showed fluorescence and thermo-responsive properties accompanied by a lower critical solution temperature (LCST), due to the introduction of the oligoethylene glycol chain. This thermo-responsive LCST behavior occurred at the border of a cloud point. Below and above the cloud point, self-assemblies of 6-7-nm nanoparticles and ~2000-nm microparticles were observed, in vitro. In addition, TFMAQ-diEg4 showed a high solubility, over 20 mM for aqueous solution, in vivo, which not only prevented thrombosis but also allowed various examinations, such as single intravenous administration and intravenous drips. Intravenous administration of TFMAQ-diEg4, to tumor-bearing, mice led to the accumulation of the molecule in the tumor tissue, as observed by fluorescence imaging. A subset of mice was treated with local heat around their tumor tissue and an intravenous drip of TFMAQ-diEg4, which led to a high intensity of TFMAQ-diEg4 emission within the tumor tissue. Therefore, we revealed that TFMAQ-diEg4 was useful as a fluorescence probe with thermo-responsive properties.

Tunable Surface Plasmon Resonance-Based Remote Actuation of Bimetallic Core-Shell Nanoparticle-Coated Stimuli Responsive Polymer for Switchable Chemo-Photothermal Synergistic Cancer Therapy

New dual light/temperature-responsive nanocarriers were synthesized using bimetallic plasmonic Au-Ag and Ag-Au nanoparticles (NPs) as cores of vehicles which subsequently functionalized with an upper critical solubility temperature-based poly acrylamide-co-acrylonitrile using reversible addition-fragmentation chain transfer for spatiotemporally controlled chemo-photothermal synergistic cancer therapy. The bimetallic cores were assigned to sense wavelengths close to the localized surface plasmon resonance of monometallic NP shell to produce heat which not only can increase the surrounding temperature over the upper critical solubility temperature of polymer to open its valves and promote drug diffusion but also can kill cancerous cells through photothermal effects with increase in environment temperature by nearly 18°C after about 5 min radiation. The bimetallic NPs were shown good reusability even after 5 heating/cooling cycles, and the efficiency of both photothermal/chemotherapic procedures can be modulated by manipulating carrier's concentration and radiation time. In addition, the cytotoxicity of drug-free nanocarriers on normal L929 fibroblast and letrozole-loaded nanocarriers on MDAMB 231 breast-cancer cell lines were investigated in the absence/presence of laser radiation. Finally, the prepared nanocomposites were exhibited switchable on/off drug release in 2 buffered solutions (pH 5.5 and 7.4) with light actuation. The results revealed that the prepared nanocarriers can be served as efficient delivery platforms for remote-control chemophotothermal synergistic cancer therapy.

Hyperbranched Multiarm Copolymers with a UCST Phase Transition: Topological Effect and the Mechanism

A novel thermoresponsive hyperbranched multiarm copolymer with a hydrophobic hyperbranched poly[3-ethyl-3-(hydroxymethyl)oxetane] core and many poly(acrylamide- co-acrylonitrile) (P(AAm- co-AN)) arms was for the first time synthesized through a reversible addition-fragmentation chain-transfer polymerization. These copolymers show reversible, sharp, and controlled temperature-responsive phase transitions at the upper critical solution temperature (UCST) in water and electrolyte solution. It is the first report on the hyperbranched copolymers with a UCST transition. Two series copolymers with variable AN content (series A) and variable arm length (series B) were synthesized to study the influence of molecular structure on the UCST transition. It was found that the UCST of copolymers could be raised by increasing the AN content or decreasing the arm length. Most interestingly, the amplification effect of the hyperbranched topological structure leads to a broad change of the UCST from 33.2 to 65.2 °C with the little change of AN content (5.9%). On the basis of variable temperature nuclear magnetic resonance, dynamic light scattering, and transmission electron microscopy, a UCST transition mechanism, in combination with hydrophilic/hydrophobic balance and multimicelle aggregate (MMA), was proposed. This work enriches the UCST copolymer topology and may extend the knowledge on the structure-activity relationship as well as the mechanism of the UCST polymers.

Nanogel-like UCST triblock copolymer micelles showing large volume expansion before abrupt dissolution

A comprehensive study of the thermally induced large expansion in volume prior to the abrupt dissociation of the micelles of a novel UCST triblock copolymer.

Zwitterionic poly(sulfobetaine methacrylate)s in water: from upper critical solution temperature (UCST) to lower critical solution temperature (LCST) with increasing length of one alkyl substituent on the nitrogen atom

Increasing the alkyl length on nitrogen of the polymer changes behaviour from UCST, to soluble, LCST, and insoluble.

Altering the Peptide Binding Selectivity of Polymeric Reverse Micelle Assemblies via Metal Ion Loading

Supramolecular reverse micelle assemblies, formed by amphiphilic copolymers, can selectively encapsulate molecules in their interiors depending on the functional groups present in the polymers. Altering the binding selectivity of these materials typically requires the synthesis of alternate functional groups. Here, we demonstrate that the addition of Zr(IV) ions to the interiors of reverse micelles having phosphonate functional groups transforms the supramolecular materials from ones that selectively bind positively charged peptides into materials that selectively bind phosphorylated peptides. We also show that the binding selectivity of these reverse micelle assemblies can be further tuned by varying the fractions of phosphonate groups in the copolymer structure. The optimized reverse micelle materials can selectively transfer and bind phosphorylated peptides from aqueous solutions over a wide range of pH conditions and can selectively enrich phosphorylated peptides even in complicated mixtures.

Enhanced Optical Sensitivity in Thermoresponsive Photonic Crystal Hydrogels by Operating Near the Phase Transition

Photonic crystal hydrogels composed of analyte-responsive hydrogels and crystalline colloidal arrays have immense potential as reagentless chemical and biological sensors. In this work, we investigated a general mechanism to rationally tune the sensitivity of photonic crystal hydrogels consisting of stimuli-responsive polymers to small molecule analytes. This mechanism was based on modulating the demixing temperature of such hydrogels relative to the characterization temperature to in effect maximize the extent of phase separation behavior; thus, the volume changes in response to the target analytes. Using ethanol as a model analyte, we demonstrated that this mechanism led to a dramatic increase in the sensitivity of optically diffracting poly(N-isopropylacrylamide) (pNIPAM) hydrogel films that exhibit a lower critical solution temperature (LCST) behavior. The demixing temperature of the pNIPAM films was modulated by copolymerization of the films with relatively hydrophobic and hydrophilic comonomers, as well as by varying the ionic strength of the characterization solution. Our results showed that copolymerization of the films with 2.5 mol % of N-tert-butylacrylamide, which is hydrophobic relative to pNIPAM, enabled the detection limit of the pNIPAM films to ethanol to be lowered ∼2-fold at 30 °C. Additionally, increasing the ionic strength of the characterization solution above 200 mM resulted in a dramatic increase in the extent of contraction of the films in the presence of ethanol. Ultimately, it was demonstrated that as little as 16 g/L or 2 vol % of ethanol in water could reliably be detected, and that the sensitivity of the films to ethanol was predictably greatest when operating near the phase transition, such that even small additions of the analyte induced the start of demixing and the collapse of the hydrogel. Such a mechanism may be extended to photonic crystal hydrogel sensors prepared from other stimuli-responsive polymers and more broadly exploited to enhance the utility of these sensors for a broad range of analytes.

A Near-Infrared Light-Responsive Hybrid Hydrogel Based on UCST Triblock Copolymer and Gold Nanorods

We report a near-infrared (NIR) light-responsive hydrogel that is capable of undergoing the gel to sol transition upon 785 nm light exposure based on a photothermal effect. The new hydrogel design relies on loading gold nanorods (AuNRs) in an ABA-type triblock copolymer, namely P(AAm–co–AN)–b–PDMA–b–P(AAm–co–AN), where P(AAm–co–AN) stands for a random copolymer of acrylamide and acrylonitrile that exhibits an upper critical solution temperature (UCST) in aqueous solution and PDMA is water-soluble polydimethylacrylamide. At solution temperature below UCST, the insoluble P(AAm–co–AN) blocks lead to formation of hydrogel of flower-like micelles. When the hydrogel is exposed to 785 nm NIR light, the absorption due to the longitudinal surface plasmon resonance of loaded AuNRs generates heat that raises the hydrogel temperature above UCST and, consequently, the gel-to-sol transition. The NIR light-triggered release of a protein loaded in the hydrogel was found to display a switchable fashion.

Phase transition and aggregation behaviour of an UCST-type copolymer poly(acrylamide-co-acrylonitrile) in water: effect of acrylonitrile content, concentration in solution, copolymer chain length and presence of electrolyte

An UCST-type copolymer of acrylamide (AAm) and acrylonitrile (AN) (poly(AAm-co-AN)) was prepared by reversible addition fragmentation chain transfer (RAFT) polymerization and its temperature-induced phase transition and aggregation behaviour studied by turbidimetry, static and dynamic light scattering, small angle neutron scattering (SANS) and cryo-transmission electron microscopy (cryo-TEM) measurements. The phase transition temperature was found to increase with increasing AN content in the copolymer, concentration of the solutions and copolymer chain length. A significant effect was observed onto the phase transition temperature by addition of different electrolytes into the copolymer solution. The copolymer chains were aggregated below the phase transition temperature and disaggregated above it. The size of the aggregates increases with increasing AN contents and concentration of the copolymer solutions below the phase transition temperature. The copolymer chains were expanded and weekly associated in solution above the phase transition temperature. A model is proposed to explain such association-aggregation behaviour of poly(AAm-co-AN) copolymers depending on AN contents and concentration of the copolymer solutions as a function of temperature.

Double thermoresponsive pentablock copolymers: synthesis by one-pot RAFT polymerization and self-assembly in aqueous solutions

Pentablock copolymers synthesized by one-pot successive RAFT polymerization are double thermoresponsive and exhibit block sequence dependent aggregation in aqueous solutions.

Thermo and pH dual responsive polypeptides derived from “clickable” poly(γ-3-methylthiopropyl-l-glutamate)

Thermo and pH dual responsive polypeptides bearing sulfonium linkages and ammonium pendants were prepared from “clickable” thioether-containing polypeptides.

CO2-Triggered UCST transition of amphiphilic triblock copolymers and their self-assemblies

Self-assembled vesicles presenting morphological transformations (vesicles–micelles–unimers) upon external stimuli due to their CO₂ adjustable UCST behavior in aqueous solution.

How to manipulate the upper critical solution temperature (UCST)?

In this mini-review, we discuss multi-stimuli-responsive polymers, which exhibit upper critical solution temperature (UCST) behavior mainly in aqueous solutions, and focus on examples where counter ions, electricity, light, or pH influence the thermoresponsiveness of these polymers.

pH-Tunable Thermoresponsive PEO-Based Functional Polymers with Pendant Amine Groups

Thermoresponsive polymers exhibiting lower critical solution temperatures (LCSTs) in aqueous solution have garnered considerable attention for the development of smart materials. Herein, we report the synthesis and properties of pH-tunable thermoresponsive poly(ethylene oxide) (PEO)-based functional polymers bearing pendant amine groups with varying cloud points. Well-defined poly(ethylene oxide-co-allyl glycidyl ether) (P(EO-co-AGE)) copolymers were prepared via controlled anionic ring-opening copolymerization of ethylene oxide (EO) with 10 mol % of a functional allyl glycidyl ether (AGE) comonomer. Facile, modular thiol-ene click chemistry was then employed to introduce a library of different aminothiols as side chains to the initial P(EO-co-AGE) copolymer. Depending on the nature of the pendant amine groups (primary amine, dimethylamine, and diethylamine) and the hydrophobicity of the side chains (ethyl, propyl, and hexyl), the cloud points could be tuned from 44-100 °C under different pH conditions. This is the first systematic investigation into the effect of PEO copolymer side chains on cloud point, which opens up the opportunity to make new thermoresponsive polymers for a variety of smart material applications.

pH-Sensitive Nanomicelles for High-Efficiency siRNA Delivery in Vitro and in Vivo: An Insight into the Design of Polycations with Robust Cytosolic Release

The extremely low efficient cytosolic release of the internalized siRNA has emerged recently as a central issue for siRNA delivery, while there is a lack of guidelines to facilitate the cytosolic release of internalized siRNA. To address these concerns, we studied the contribution of the pH-sensitive inner core on handling the cytosolic release of siRNA delivered by a series of PG-P(DPAx-co-DMAEMAy)-PCB amphiphilic polycation nanomicelles (GDDC-Ms) with extremely low internalization (<1/4 of lipofactamine 2000 (Lipo2000)). Significantly, just by varying the mole ratio of DPA and DMAEMA to adjust the initial disassembly pH (pH_dis) of the core near to 6.8, GDDC₄-Ms/siRNA could get nearly 98.8% silencing efficiency at w/w = 12 with 50 nM siRNA and ∼78% silencing efficiency at w/w = 30 with a very low dose of 5 nM siRNA in HepG-2 cell lines, while Lipo2000 only got 65.7% with 50 nM siRNA. Furthermore, ∼98.4% silencing efficiency was also realized in the hard-to-transfect human acute monoblastic leukemia cell line U937 by GDDC₄-Ms/siRNA (at w/w = 15, 50 nM siRNA), in the inefficient case for Lipo2000. Additionally, the high silencing efficiency (∼80%) in skin tissue in vivo was discovered. Undoubtedly, the robust potential of GDDC₄-Ms in handling the cytosolic release paves a simple but efficient new way for the design of the nonviral siRNA vector.

Synthesis, characterization and pH sensitivity of polyampholyte containing aromatic rings

pH sensitivity of these polyampholytes containing aromatic rings can be controlled at the fixed degree of substitution.