Model-Based Design To Push the Boundaries of Sequence Control

Mechanism-Guided Discovery of Cleavable Comonomers for Backbone Deconstructable Poly(methyl methacrylate)

The development of cleavable comonomers (CCs) with suitable copolymerization reactivity paves the way for the introduction of backbone deconstructability into polymers. Recent advancements in thionolactone-based CCs, exemplified by dibenzo[c,e]-oxepine-5(7H)-thione (DOT), have opened promising avenues for the selective deconstruction of multiple classes of vinyl polymers, including polyacrylates, polyacrylamides, and polystyrenics. To date, however, no thionolactone CC has been shown to copolymerize with methacrylates to an appreciable extent to enable polymer deconstruction. Here, we overcome this challenge through the design of a new class of benzyl-functionalized thionolactones (bDOTs). Guided by detailed mechanistic analyses, we find that the introduction of radical-stabilizing substituents to bDOTs enables markedly increased and tunable copolymerization reactivity with methyl methacrylate (MMA). Through iterative optimizations of the molecular structure, a specific bDOT, F-p-CF3PhDOT, is discovered to copolymerize efficiently with MMA. High molar mass deconstructable PMMA-based copolymers (dPMMA, Mn > 120 kDa) with low percentages of F-p-CF3PhDOT (1.8 and 3.8 mol%) are prepared using industrially relevant bulk free radical copolymerization conditions. The thermomechanical properties of dPMMA are similar to PMMA; however, the former is shown to degrade into low molar mass fragments (<6.5 kDa) under mild aminolysis conditions. This work presents the first example of a radical ring-opening CC capable of nearly random copolymerization with MMA without the possibility of cross-linking and provides a workflow for the mechanism-guided design of deconstructable copolymers in the future.

A general model for the ideal chain length distributions of polymers made with reversible deactivation

A general model is developed for the distribution of polymers made with reversible deactivation. The model is applied to a range of experimental systems including RAFT, cationic and ATRP.

A unified kinetic Monte Carlo approach to evaluate (a)symmetric block and gradient copolymers with linear and branched chains illustrated for poly(2-oxazoline)s

The synthesis of well-defined gradient, block-gradient and di-block copolymers with both asymmetric and symmetric compositions considering hydrophilic and hydrophobic monomer units is relevant for application fields, such as drug/gene delivery...

Computational prediction of the molecular configuration of three-dimensional network polymers

The three-dimensional arrangement of natural and synthetic network materials determines their application range. Control over the real-time incorporation of each building block and functional group is desired to regulate the macroscopic properties of the material from the molecular level onwards. Here we report an approach combining kinetic Monte Carlo and molecular dynamics simulations that chemically and physically predicts the interactions between building blocks in time and in space for the entire formation process of three-dimensional networks. This framework takes into account variations in inter- and intramolecular chemical reactivity, diffusivity, segmental compositions, branch/network point locations and defects. From the kinetic and three-dimensional structural information gathered, we construct structure-property relationships based on molecular descriptors such as pore size or dangling chain distribution and differentiate ideal from non-ideal structural elements. We validate such relationships by synthesizing organosilica, epoxy-amine and Diels-Alder networks with tailored properties and functions, further demonstrating the broad applicability of the platform.

The Sequence of a Step-Growth Copolymer Can Be Influenced by Its Own Persistence Length

Synthetic copolymer sequences remain challenging to control, and there are features of even simple one-pot, solution-based copolymerizations that are not yet fully understood. In previous simulations on step-growth copolymerizations in solution, we demonstrated that modest variations in the attractions between type A and B monomers could significantly influence copolymer sequence through an emergent aggregation and phase separation initiated by the lengthening of nascent oligomers. Here we investigate how one aspect of a copolymer's geometry-its flexibility-can modulate those effects. Our simulations show the onset of strand alignment within the polymerization-induced aggregates as chain stiffness increases and demonstrate that this alignment can influence the resulting copolymer sequences. For less flexible copolymers, with persistence lengths ≥10 monomers, modest nonbonded attractions of ∼k_BT between monomers of the same type yield A and B blocks of a characteristic length and result in a polydispersity index that grows rapidly, peaks, and then diminishes as the reaction proceeds. These results demonstrate that for copolymer systems with modest variations in intermonomer attractions and physically realistic flexibilities a nascent copolymer's persistence length can influence its own sequence.

Impact of side reactions on molar mass distribution, unsaturation level and branching density in solution free radical polymerization of n-butyl acrylate under well-defined lab-scale reactor conditions

The paper describes the influence of side reactions in isothermal solution free-radical polymerization of n-butyl acrylate accounting for chain-length dependent diffusional limitations on termination.

Coupled matrix kinetic Monte Carlo simulations applied for advanced understanding of polymer grafting kinetics

An innovative coupled matrix-based Monte Carlo (CMMC) concept has been applied to successfully assess the detailed description of the molecular build-up of linear and non-linear chains in the free-radical induced grafting of linear precursors chains.

Effect of Poly(vinyl butyral) Comonomer Sequence on Adhesion to Amorphous Silica: A Coarse-Grained Molecular Dynamics Study

Modulating a comonomer sequence, in addition to the overall chemical composition, is the key to unlocking the true potential of many existing commercial copolymers. We employ coarse-grained molecular dynamics (MD) simulations to study the behavior of random-blocky poly(vinyl butyral-co-vinyl alcohol) (PVB) melts in contact with an amorphous silica surface, representing the interface found in laminated safety glass. Our two-pronged coarse-graining approach utilizes both macroscopic thermophysical data and all-atom MD simulation data. Polymer-polymer nonbonded interactions are described by the fused-sphere SAFT-γ Mie equation of state, while bonded interactions are derived using Boltzmann inversion to match the bond and angle distributions from all-atom PVB chains. Spatially dependent polymer-surface interactions are mapped from a hydroxylated all-atom amorphous silica slab model and all-atom monomers to an external potential acting on the coarse-grained sites. We discovered an unexpected complex relationship between the blockiness parameter and the adhesion energy. The adhesion strength between PVB copolymers with intermediate VA content and silica was found to be maximal for random-blocky copolymers with a moderately high degree of blockiness rather than for diblock copolymers. We attribute this to two main factors: (1) changes in morphology, which dramatically alter the number of VA beads interacting with the surface and (2) a non-negligible contribution of vinyl butyral (VB) monomers to adhesion energy because of their preference to adsorb to zones with low hydroxyl density on the silica surface.

Role of External Field in Polymerization: Mechanism and Kinetics

The past decades have witnessed an increasing interest in developing advanced polymerization techniques subjected to external fields. Various physical modulations, such as temperature, light, electricity, magnetic field, ultrasound, and microwave irradiation, are noninvasive means, having superb but distinct abilities to regulate polymerizations in terms of process intensification and spatial and temporal controls. Gas as an emerging regulator plays a distinctive role in controlling polymerization and resembles a physical regulator in some cases. This review provides a systematic overview of seven types of external-field-regulated polymerizations, ranging from chain-growth to step-growth polymerization. A detailed account of the relevant mechanism and kinetics is provided to better understand the role of each external field in polymerization. In addition, given the crucial role of modeling and simulation in mechanisms and kinetics investigation, an overview of model construction and typical numerical methods used in this field as well as highlights of the interaction between experiment and simulation toward kinetics in the existing systems are given. At the end, limitations and future perspectives for this field are critically discussed. This state-of-the-art research progress not only provides the fundamental principles underlying external-field-regulated polymerizations but also stimulates new development of advanced polymerization methods.

Connecting polymer synthesis and chemical recycling on a chain-by-chain basis: a unified matrix-based kinetic Monte Carlo strategy

Polymer synthesis and subsequent depolymerisation/degradation are linked at the molecular level.

Surface-Initiated Initiators for Continuous Activator Regeneration (SI ICAR) ATRP of MMA from 2,2,6,6-tetramethylpiperidine-1-oxy (TEMPO) Oxidized Cellulose Nanofibers for the Preparations of PMMA Nanocomposites

An effective method of oxidation from paper pulps via 2,2,6,6–tetramethylpiperidine–1–oxy (TEMPO) compound to obtain TEMPO-oxidized cellulose nanofibers (TOCNs) was demonstrated. Following by acylation, TOCN having an atom transfer radical polymerization (ATRP) initiating site of bromoisobutyryl moiety (i.e., TOCN–Br) was successfully obtained. Through a facile and practical technique of surface-initiated initiators for continuous activator regeneration atom transfer radical polymerization (SI ICAR ATRP) of methyl methacrylate (MMA) from TOCN–Br, controllable grafting polymer chain lengths (M_n = ca. 10k–30k g/mol) with low polydispersity (PDI < 1.2) can be achieved to afford TOCN–g–Poly(methyl methacrylate) (PMMA) nanomaterials. These modifications were monitored by Fourier-transform infrared spectroscopy (FT–IR), scanning electron microscopy (SEM), electron spectroscopy for chemical analysis (ESCA), and water contact angle analysis. Eventually, TOCN–g–PMMA/PMMA composites were prepared using the solvent blending method. Compared to the pristine PMMA (T_g = 100 °C; tensile strength (σ_T) = 17.1 MPa), the composites possessed high transparency with enhanced thermal properties and high tensile strength (T_g = 110 °C and σ_T = 37.2 MPa in 1 wt% TOCN containing case) that were investigated by ultraviolet-visible spectroscopy (UV-Vis), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), and tensile tests. We demonstrated that minor amounts of TOCN–g–PMMA nanofillers can provide high efficacy in improving the mechanical and thermal properties of PMMA matrix.

Visualization and design of the functional group distribution during statistical copolymerization

Even though functional copolymers with a low percentage of functional comonomer units (up to 20 mol%) are widely used, for instance for the development of polymer therapeutics and hydrogels, insights in the functional group distribution over the actual chains are lacking and the average composition is conventionally used to describe the functionalization degree. Here we report the visualization of the monomer distribution over the different polymer chains by a synergetic combination of experimental and theoretical analysis aiming at the construction of functionality-chain length distributions (FUNC-CLDs). A successful design of the chemical structure of the comonomer pair, the initial functional comonomer amount (13 mol%), and the temperature (100 °C) is performed to tune the FUNC-CLD of copoly(2-oxazoline)s toward high functionalization degree for both low (100) and high (400) target degrees of polymerization. The proposed research strategy is generic and extendable to a broad range of copolymerization chemistries, including reversible deactivation radical polymerization.

Synthesis of Poly(N-vinylpyrrolidone)-Based Polymer Bottlebrushes by ATRPA and RAFT Polymerization: Toward Drug Delivery Application

Atom transfer radical polyaddition (ATRPA) was utilized herein to synthesize a specific functional polyester. We conducted ATRPA of 4-vinylbenzyl 2-bromo-2-phenylacetate (VBBPA) inimer and successfully obtained a linear type poly(VBBPA) (PVBBPA) polyester with benzylic bromides along the backbone. To obtain a novel amphiphilic polymer bottlebrush, however, the lateral ATRP chain extension of PVBBPA with N-vinyl pyrrolidone (NVP) met the problem of quantitative dimerization. By replacing the bromides to xanthate moieties efficiently, we thus observed a pseudo linear first order reversible addition-fragmentation chain transfer (RAFT) polymerization to obtain novel poly(4-vinylbenzyl-2-phenylacetate)-g-poly(NVP) (PVBPA-g-PNVP) amphiphilic polymer bottlebrushes. The critical micelle concentration (CMC) and particle size of the amphiphilic polymer bottlebrushes were characterized by fluorescence spectroscopy, dynamic light scattering (DLS), and scanning electron microscopy (SEM) (CMCs < 0.5 mg/mL; particle sizes = ca. 100 nm). Toward drug delivery application, we examined release profiles using a model drug of Nile red at different pH environments (3, 5, and 7). Eventually, low cytotoxicity and well cell uptake of the Madin-Darby Canine Kidney Epithelial (MDCK) for the polymer bottlebrush micelles were demonstrated.

Understanding copolymerisation kinetics for the design of functional copolymers via free radical polymerisation

We report the free radical copolymerisation kinetics and co-monomer sequence distribution for a series of functional copolymers based on MMA.

Synthesis of strictly alternating copolymers by living carbanionic copolymerization of diphenylethylene with 1,3-pentadiene isomers

The living carbanionic alternating copolymerizations of 1,3-pentadiene isomers with DPE are reported, and yield well-defined alternating and highly stereoregular amorphous copolymers with controllable M_n, low Đ_M and predominantly trans-1,4 units.

Deterministic Approaches for Simulation of Nitroxide-Mediated Radical Polymerization

Since its development in the last decades, controlled radical polymerization (CRP) has become a very promising option for the synthesis of polymers with controlled structure. The design and production of tailor-made materials can be significantly improved by developing models capable of predicting the polymer properties from the operating conditions. Nitroxide-mediated polymerization (NMP) was the first of the three main variants of CRP to be discovered. Although it has lost preference over the years against other CRP alternatives, NMP is still an attractive synthesis method because of its simple experimental implementation and environmental friendliness. This review focuses on deterministic methods employed in mathematical models of NMP. It presents an overview of the different techniques that have been reported for modelling NMP processes in homogeneous and heterogeneous media, covering from the prediction of average properties to the latest techniques for modelling univariate and multivariate distributions of polymer properties. Finally, an outlook of model-based design studies of NMP processes is given.

Simulation of the Degradation of Cyclic Ketene Acetal and Vinyl-Based Copolymers Synthesized via a Radical Process: Influence of the Reactivity Ratios on the Degradability Properties

The radical copolymerization of vinyl and cyclic ketene acetal (CKA) monomers is a promising way to prepare degradable vinyl polymers. The reactivity of the comonomer pair is known to be dependent of the vinyl monomer structure that requires to play with experimental conditions (feed ratio, overall monomer conversion, etc.) to target a desired cumulative (average) copolymer composition. Even if the materials are completely degradable, there is no information about the homogeneity of the degraded products. This theoretical study, using kinetic Monte Carlo simulations, allows simulating degradation at the molecular level. It is shown that disparate reactivity ratios (styrene/CKA, etc.) and also a composition drift at high conversion can lead to an inhomogeneous degraded product compared to systems with similar reactivity ratios (vinyl ether/CKA, etc.). The use of reversible deactivation radical polymerization techniques does not influence the final degraded products and is only useful for the design of advanced macromolecular architectures before degradation.

Exploring Strategies To Bias Sequence in Natural and Synthetic Oligomers and Polymers

Millions of years of biological evolution have driven the development of highly sophisticated molecular machinery found within living systems. These systems produce polymers such as proteins and nucleic acids with incredible fidelity and function. In nature, the precise molecular sequence is the factor that determines the function of these macromolecules. Given that the ability to precisely define sequence emerges naturally, the fact that biology achieves unprecedented control over the unit sequence of the monomers through evolved enzymatic catalysis is incredible. Indeed, the ability to engineer systems that allow polymer synthesis with precise sequence control is a feat that technology is yet to replicate in artificial synthetic systems. This is the case because, without access to evolutionary control for finely tuned biological catalysts, the inability to correct errors or harness multiple competing processes means that the prospects for digital control of polymerization have been firmly bootstrapped to biological systems or limited to stepwise synthetic protocols. In this Account, we give an overview of strategies that have been used over the last 5 years in efforts to program polymer synthesis with sequence control in the laboratory. We also briefly explore how the use of robotics, algorithms, and stochastic chemical processes might lead to new understanding, mechanisms, and strategies to achieve full digital control. The aim is to see whether it is possible to go beyond bootstrapping to biological polymers or stepwise chemical synthesis. We start by describing nonenzymatic techniques used to obtain sequence-controlled natural polymers, a field that lends itself to direct application of insights gleaned from biology. We discuss major advances, such as the use of rotaxane-based molecular machines and templated approaches, including the utilization of biological polymers as templates for purely synthetic chains. We then discuss synthetic polymer chemistry, whose array of techniques allows the production of polymers with enormous structural and functional diversity, but so far with only limited control over the unit sequence itself. Synthetic polymers can be subdivided into multiple classes depending on the nature of processes used to synthesize them, such as by addition or condensation. Consequently, varied approaches for sequence control have been demonstrated in the area, including but not limited to click reactions, iterative solid-phase chemistry, and exploiting the chemical affinity of the monomers themselves. In addition to those, we highlight the importance of environmental bias in possible control of polymerization at the single-unit level, such as using catalyst switching or external stimuli. Even the most successful experimental sequence control approach needs appropriate tools to verify its scope and validity; therefore, we devote part of the present Account to possible analytical approaches to sequence readout, starting with well-established tandem mass spectrometry techniques and touching on those more applicable to specific classes of processes, such as diffusion-ordered NMR spectroscopy. Finally, we discuss progress in modeling and automation of sequence-controlled polymers. We postulate that developments in analytical chemistry, bioinformatics, and computer modeling will lead to new ways of exploring the development of new strategies for the realization of sequence control by means of sequence bias. This is the case because treating the assembly of polymers as a network of chemical reactions will enable the development of control strategies that can bias the outcome of the polymer assembly. The grand aim would be the synthesis of complex polymers in one step with a precisely defined digital sequence.

Synthesis of Waterborne Polyurethane by the Telechelic α,ω-Di(hydroxy)poly(n-butyl acrylate)

A key for the preparation of polyacrylate-based polyurethane is the synthesis of hydroxyl-terminated polyacrylate. To our knowledge, exactly one hydroxyl group of every polyacrylate chain has not been reported. The hydroxyl-terminated poly(butyl acrylate) (PBA) has been successfully synthesized by degenerative iodine transfer polymerization (DITP) of the n-butyl acrylate (n-BA) using 4,4′-azobis(4-cyano-1-pentanol) (ACPO) and diiodoxylene (DIX) as initiator and chain transfer agent, respectively, and subsequently substituted reaction of the iodine-terminated PBA with β-mercaptoethanol in alkaline condition. The latter reaction was highly efficient, and the terminal iodine at the end of polymer chains were almost quantitatively transformed to a hydroxyl group. 2,2′-Azobis(isobutyronitrile) (AIBN) and ACPO were used as initiators in the DITPs of n-BA. The results demonstrated that they had a significant influence on the terminal groups of the formed polymer chains. The structure, molecular weight, and molecular weight distribution of the hydroxyl-terminated PBA have been studied by ¹H, ¹³C NMR, and GPC results. The components of hydroxyl-terminated PBA were determined by MALDI-TOF MS spectra, and their formation is discussed. The broad molecular weight distribution of the PBA and the difference in the polymerization behaviors from typical living radical polymerization are explained based on the results of ¹H NMR and MALDI-TOF MS spectra. The hydroxyl-terminated PBA has been successfully used in the preparation of PBA-based polyurethane dispersions (PUDs). The aqueous PUDs were stable, and based on the DSC results it can be said that the miscibility of hard segments with PBA chains was improved.

Analytical and advanced kinetic models for characterization of chain-growth copolymerization: the state-of-the-art

A detailed overview is given on the currently developed analytical and advanced kinetic models to calculate the main bulk/solution chain-growth copolymerization characteristics.

Gradient helical copolymers: synthesis, chiroptical properties, thermotropic liquid crystallinity, and self-assembly in selective organic solvents

A series of novel gradient copolymers R-(−)-poly(StN-grad-C8) were synthesized through atom transfer radical copolymerization of an achiral styrenic monomer, N,N-dimethyl-4-ethenylbenzamide (M-StN), and a chiral bulky vinylterphenyl monomer, (−)-2,5-bis{4′-[(R)-sec-octyloxycarbonyl]phenyl}styrene (R-(−)-M-C8).

Two-compartment kinetic Monte Carlo modelling of electrochemically mediated ATRP

Novel eATRP mechanistic insights are formulated, considering a two-compartment kinetic Monte Carlo model with catalyst concentration gradients accounted for.

Defining the Field of Sequence-Controlled Polymers

Over the last ten years, the development of synthetic polymers containing controlled monomer sequences has become a prominent topic in fundamental and applied polymer science. This emerging area is particularly broad and combines classical polymer chemistry tools with techniques imported from other domains such as biology, biochemistry, organic synthesis, engineering, and bioanalytics. Consequently, it also generates new structures, terminologies, and applications that are not within the traditional scope of polymer science. The term "sequence-controlled polymers" (SCPs) was recently proposed as a generic name to describe all these recent trends. However, since the field of SCPs has been growing very rapidly in recent literature, it is urgent to accurately define its scientific frontiers. In this important context, this review is an attempt to define, rationalize, and classify the field of SCPs. In particular, all synthetic approaches that have been reported for the synthesis of SCPs are discussed and categorized. In addition, the characterization tools, properties, and potential applications of these new polymers are described herein. Overall, this review serves as a reference guide for understanding the burgeoning field of SCPs.

Radical Ring-Opening Copolymerization of Cyclic Ketene Acetals and Maleimides Affords Homogeneous Incorporation of Degradable Units

Radical copolymerization of donor-acceptor (D-A) monomer pairs has served as a versatile platform for the development of alternating copolymers. However, due to the use of conventional radical polymerization, the resulting copolymers have generally been limited to nondegradable vinyl polymers. By combining radical D-A copolymerization with radical ring-opening polymerization (rROP), we have synthesized an alternating copolymer with a high incorporation of degradable backbone units. Copolymerization of N-ethyl maleimide (NEtMI) with the cyclic ketene acetal (CKA) 2-methylene-4-phenyl-1,3-dioxolane (MPDL) was demonstrated to proceed in an alternating fashion, and controlled polymerization was achieved using reversible addition-fragmentation chain transfer (RAFT) polymerization. Spontaneous copolymerization, in the absence of an exogenous initiating source, occurred when the mixture of monomers was heated, presumably due to the large electron disparity between the comonomers. Chain-extension with styrene afforded well-defined P(MPDL-alt-NEtMI)-b-polystyrene copolymers, and degradation of the homopolymers and block copolymers showed complete breakdown of the alternating copolymer.

A detailed mechanistic study of bulk MADIX of styrene and its chain extension

By combining experimental and modeling tools, a detailed characterization study of MADIX properties becomes possible.