Straightforward Xanthate-Mediated Synthesis of Functional γ-Thiolactones and Their Application to Polymer Synthesis and Modification

Reconfiguration, Welding, Reprogramming, and Complex Shape Transformation of An Optical Shape Memory Polymer Network Enabled by Patterned Secondary Crosslinking

Stimuli-triggered generation of complicated 3D shapes from 2D strips or plates without using sophisticated molds is desirable and achieving such 2D-to-3D shape transformation in combination with shape reconfiguration, welding, and reprogramming on a single material is very challenging. Here, a convenient and facile strategy using the solution of a disulfide-containing diamine for patterned secondary crosslinking of an optical shape-memory polymer network is developed to integrate the above performances. The dangling thiolectones attached to the backbones react with the diamine in the solution-deposited region so that the secondary crosslinking may not only weld individual strips into assembled 3D shapes but also suppress the relaxation of the deformed polymer chains to different extents for shape reconfiguration or heating-induced complex 3D deformations. In addition, as the dynamic disulfide bonds can be thermally activated to erase the initial programming information and the excessive thiolectones are available for subsequent patterned crosslinking, the material also allows shape reprogramming. Combining welding with patterning treatment, it is further demonstrated that a gripper can be assembled and photothermally controlled to readily grasp an object.

Versatile thiolactone-based conjugation strategies to polymer stabilizers for multifunctional upconverting nanoparticles aqueous dispersions

We describe here a new methodology for the synthesis of well-defined phosphonic acid-terminated poly(ethylene glycol) (PEG) and RAFT-derived poly(N-vinylpyrrolidone) (PVP) and poly(N-vinylcaprolactam) (PVCL) by amine-thiol-ene and amine-thiol-thiosulfonate conjugation strategies using a phosphonated thiolactone and their use to prepare stable, water-dispersible multifunctional upconverting luminescent nanohybrids.

Thiolactone chemistry, a versatile platform for macromolecular engineering

This review covers the extensive use of γ-thiolactone chemistry as a versatile and powerful tool for macromolecular engineering and the preparation of various polymer architectures, such as functional, alternating, or sequence-controlled (co)polymers.

Azo-Derived Symmetrical Trithiocarbonate for Unprecedented RAFT Control

Bis(2-cyanopropan-2-yl)trithiocarbonate (TTC-bCP) is a new symmetrical trithiocarbonate with the best leaving group ever reported for reversible addition-fragmentation chain transfer (RAFT) polymerization. We propose an elegant route to obtain TTC-bCP starting from 2,2'-azobis(2-methylpropionitrile) (AIBN) as a donor of the 2-cyanopropan-2-yl group. TTC-bCP allowed the preparation of a high-molar-mass (M_n ≈ 135 kg mol^-1) methyl methacrylate-n-butyl acrylate-methyl methacrylate triblock copolymer with unprecedented control (D̵ = 1.04) in reversible-deactivation radical polymerization. Rheology measurements of this triblock copolymer showed a typical thermoplastic elastomer behavior with a steady rubbery plateau up to 120 °C.

The reaction of potassium xanthates with five-membered cyclic carbonates: selectivity of the underlying cascade reactions and mechanistic insights

In this paper we describe the reaction between various potassium xanthates (potassium O-methyl xanthate, potassium O-isobutyl xanthate, xanthate functionalized MPEGs, etc.) and common five-membered cyclic carbonates such as ethylene carbonate (EC) and propylene carbonate (PC). The reaction was carried out under catalyst-free conditions. Intensive evolution of both CO₂ and COS and the simultaneous formation of a rich precipitate were found to be the characteristic features of the studied reaction. It was determined that the precipitate consists of various alkoxides, including potassium ethane-1,2-bis(olate) (EC-based reaction) and potassium propane-1,2-bis(olate) (PC-based reaction) and alkoxide-terminated sulfides. It was also demonstrated that the resulting liquid phase (the mother liquor) contains polyalkylene sulfides whose number average molecular weight (M_n) was found to be in the range 400–550 Da and 300–400 Da for EC- and PC-based oligomers, respectively. Further studies revealed that the distribution between major products varies considerably with variation in the parameters of the reaction. Thus, by applying reduced pressure conditions and a temperature equal to 90 °C, up to 95% selectivity towards the formation of alkoxide-terminated sulfide (e.g., potassium 1,1′-thiobis(propan-2-olate)) was achieved. On the other hand, selectivity towards alkoxide formation equal to 98% was achieved for the reactions carried out in the presence of water. As a general trend, it was also established that a shift in balance between products towards the formation of sulfur-containing products (sulfides) occurs with an appropriate increase in the temperature of the reaction. Based on the obtained experimental data supplemented with quantum-chemical calculations (NBO analysis and scanning of the potential energy surface), the mechanisms of the cascade reactions underlying the formation of key intermediates and final products were also proposed.

In this paper we describe the reaction between potassium xanthates and common five-membered cyclic carbonates such as ethylene carbonate (EC) and propylene carbonate (PC) with special focus on mechanisms of the underlied cascad transformations.

Organocatalytic Michael Addition as a Method for Polyisobutylene Chain-End Functionalization

Functionalization of polyolefins, in particular polyisobutylene, remains a relatively unexplored application for the Michael reaction. This work evaluates the potential of polyisobutylene acrylate (PIBA) chain-end modification via organocatalyzed thiol-Michael and aza-Michael additions. A series of chain-end functional polyisobutylene oligomers are prepared using "click" reactions of thiols or amines to PIBA in the presence of 0.02 equivalents of organocatalyst. Reaction kinetics and chain-end transformations are monitored using NMR spectroscopy and the macromolecular products are characterized by size exclusion chromatography. Further potential of this synthetic strategy is illustrated by thiol-Michael addition of thiols formed in situ via nucleophilic thiolactone ring opening. The obtained results provide an efficient method for the preparation of functional polyisobutylene oligomers that can be utilized in a broad range of potential applications.

Recent advances in photocatalytic C–S/P–S bond formation via the generation of sulfur centered radicals and functionalization

In this review, we have focused on the recent advances in photocatalytic C–S/P–S bond formation via the generation of thioyl/sulfonyl radicals and further functionalization.

Scope and Limitations of Xanthate-Mediated Synthesis of Functional γ-Thiolactones

A modular platform based on free-radical xanthate addition to alkenes enables access to a large series of functional γ-thiolactones. This methodology includes two different pathways based on xanthate chemistry involving radical addition and Chugaev elimination steps. The first method uses the addition of an ester-functionalized xanthate to various commercially functional alkenes, whereas the second one is based on the addition of functional xanthates to an ester-functionalized alkene. In both cases, a series of xanthate/alkene monoadducts was obtained, and their thermolysis and subsequent cyclization led to a library of functional γ-thiolactones in moderate to good yield. For a few cases where it may not be possible to directly incorporate some targeted functional groups via the proposed process involving free radicals and high temperature, a bromo-functionalized thiolactone was used as a starting material for chemical transformations.

Scope and limitations of ring-opening copolymerization of trimethylene carbonate with substituted γ-thiolactones

The reactivity of functional γ-thiolactones has been investigated in Ring Opening Copolymerization with trimethylene carbonate.