Kinetics of Dynamic Polymer Brush Formation

Surface modifying amphiphilic additives and their effect on the fouling-release performance of siloxane-polyurethane coatings

In this work, surface-modifying amphiphilic additives (SMAAs) were synthesized via hydrosilylation using various polymethylhydrosiloxanes (PMHS) and allyl-terminated polyethylene glycol monomethyl ethers (APEG) of varying molecular weights. The additives synthesized were incorporated into a hydrophobic, self-stratifying siloxane-polyurethane (SiPU) coating system to produce an amphiphilic surface. Contact angle experiments and atomic force microscopy (AFM), in a dry and hydrated state, were performed to assess changes in surface wettability and morphology. The antifouling and fouling-release (AF/FR) performances were evaluated by performing laboratory biological assays using the marine bacterium Cellulophaga lytica, the microalga Navicula incerta, the macroalga Ulva linza, the barnacle Amphibalanus amphitrite, and the marine mussel, Geukensia demissa. Several of the formulations showed improved AF/FR performance vs the base SiPU and performed better than some of the commercial standard marine coatings. Formulations containing SMAAs with a low grafting density of relatively high molecular weight PEG chains showed the best performance overall.

Hydrophilic dangling chain interfacial segregation in polyurethane networks at aqueous interfaces and its underlying mechanisms: molecular dynamics simulations

Polymer networks with hydrophilic dangling chains are ideal candidates for many submerged applications, e.g., protein non-adhesive coatings with non-fouling behavior. The dangling chains segregate from the polymer network towards the water and form a brush-like structure at the interface. Several factors such as the polymer network structure, dangling chain length, and water/dangling chain interaction may all affect the interfacial performance of the polymer. Therefore, we employed a Martini based coarse-grained (CG) molecular dynamics (MD) simulation to elucidate the influences of the abovementioned parameters on dangling chain interfacial segregation. We built up several polyurethane (PU) networks based on poly(tetra methylene glycol) (PTMG), as a macrodiol, and methoxy poly(ethylene glycol) (mPEG), as a dangling chain, with varying molecular weights. We found out that the macrodiol/dangling chain length ratio considerably smaller than one impedes the migration of dangling chains towards the water interface, while the dangling chain hydrophilicity and length determine the polymer interfacial layer density/thickness. Then, we artificially changed the dangling chain affinity to water from an intermediate to a very attractive water/dangling chain interaction. We justified that a brush-like structure forms in two consecutive steps: first, a longitudinal, and then a lateral migration of dangling chains in water. The latter step results in a uniform interfacial layer over the polymer interface that mainly occurs in the case of the attractive water/dangling chain interaction.

Hydration State Variation of Polyzwitterion Brushes through Interplay with Ions

Polyzwitterions have emerged as a new class of antifouling materials alternating poly(ethylene glycol). The exemplary biopassivation and lubrication behaviors are often attributed to the particular chemical structure of zwitterions, which involve a large dipole moment of the charged groups and a neutral net charge, while the hydration state and dynamics also associate with these characteristics. Polymer brushes composed of surface-tethered polyzwitterion chains produced by surface-initiated controlled radical polymerization have been developed as thin films which exhibit excellent antifouling and lubrication properties. In past decades, numerous studies have been devoted to examining the structure and dynamics of polyzwitterion brush chains in aqueous solutions. This feature article provides an overview of recent studies exploring the hydration state of polyzwitterion brushes with specular neutron reflectivity, highlights some newly published work on the nonuniform equilibrium structure, ion concentration dependence, ion specificity, and the effects of charge spacer length in the zwitterions, and discusses future perspective in this field.

Interfacial Energy Measurement on the Reconstructive Polymer Surface: Dynamic Polymer Brush by Segregation of Amphiphilic Block Copolymers

Herein, the interfacial energy of a reconstructive polymer surface formed by segregation is analyzed by measuring the change in the size of elastomer thin films floating on water. When a system in which amphiphilic diblock copolymers are mixed with the hydrophobic elastomer is in contact with water, surface reconstruction is triggered by the segregation of copolymers with a gain in the hydration energy of the hydrophilic blocks. The hydrophilic brush layer spontaneously formed at the elastomer-water interface is named the dynamic polymer brush. Although it is anticipated that the interfacial energy will significantly decrease in the dynamic polymer brush system, a direct measurement of the interfacial energy of the reconstructive interface is a challenge. We propose a novel method to measure the interfacial energy of a reconstructive polymer surface by measuring the deformation of elastomer thin films floating on water and apply it to the dynamic polymer brush system. The interfacial energy of the dynamic polymer brush formed by the segregation of amphiphilic diblock copolymers with longer hydrophilic chains drastically decreased to zero due to the high hydration energy of hydrophilic chains. Based on the neutron reflectometry results, the graft density and thickness of the dynamic polymer brush system floating on water were found to be lower than those of the system fixed onto solid substrates. This indicates that the floating system can respond to an external environment with a high degree of freedom (graft density, brush thickness, and interface area).

Adhesion Force Analysis of Dynamic Polymer Brushes

Spontaneous surface segregation of amphiphilic diblock copolymers at the water interface from the elastomeric portion was utilized for the fabrication of hydrophilic brushes, named as "dynamic polymer brush". Observation of the dynamic polymer brushes appears only when immersed in water and demands advanced experimental techniques for embedded interfaces such as neutron reflectivity. Measurement of the hydrophobic interaction at the polymer/water interface is not only an alternative method to monitor the brush but also reveals its unique surface properties. We carried out adhesion force measurements using atomic force microscopy with a hydrophobic probe for measuring the hydrophobic interactions of dynamic polymer brushes in water. Dynamic polymer brushes showed reduced hydrophobic interaction, which becomes more significant at higher graft density. Moreover, a unique transitional response to the applied pressure was observed for the dynamic polymer brush: the adhesion force was almost zero at low applied pressure and increased by further increasing the applied pressure. This phenomenon may indicate reallocation or retraction of the block copolymer chains from the contact area by the applied pressure, which are the unique characteristics of nonbound dynamic polymer brush chains. We also conducted adhesion force imaging and proved that dynamic polymer brushes form uniform layers without any defects, irrespective of brush density, which suggests that the interaction between the dynamic polymer brush chains is that of repulsion.

Adaptive Wetting-Adaptation in Wetting

Many surfaces reversibly change their structure and interfacial energy upon being in contact with a liquid. Such surfaces adapt to a specific liquid. We propose the first order kinetic model to describe dynamic contact angles of such adaptive surfaces. The model is general and does not refer to a particular adaptation process. The aim of the proposed model is to provide a quantitative description of adaptive wetting and to link changes in contact angles to microscopic adaptation processes. By introducing exponentially relaxing interfacial energies and applying Young's equation locally, we predict a change of advancing and receding contact angles depending on the velocity of the contact line. Even for perfectly homogeneous and smooth surfaces, a dynamic contact angle hysteresis is obtained. As possible adaptations, we discuss changes and reconstruction of polymer surfaces or monolayers, diffusion and swelling, adsorption of surfactants, replacement of contaminants, reorientation of liquid molecules, or formation of an electric double layer.

A thermoresponsive dynamic polymer brush fabricated by the segregation of amphiphilic diblock copolymers

A highly dense polymer brush was previously fabricated by the spontaneous segregation of amphiphilic diblock copolymers in an elastomer matrix into water and a hydrophobic polymer interface and named a 'dynamic polymer brush'. We fabricated a lower critical solution temperature (LCST)-type thermoresponsive dynamic polymer brush by mixing polyisoprene-b-poly[tri(ethylene glycol)methyl ether methacrylate] (PI-b-PME3MA) into a polystyrene-b-polyisoprene-b-polystyrene (SIS) elastomer. The LCST of PME3MA in water is 52 °C. The structure of the polymer brush was determined at several different temperatures using neutron reflectivity. With increasing temperature, the brush thickness of the LCST-type thermoresponsive dynamic polymer brush decreases, similar to the conventional fixed brush with the LCST-type thermoresponse. However, the graft density of the dynamic polymer brush surprisingly increases with increasing temperature. The change of the brush density of the conventional fixed polymer brush is not allowed. However, we observed for the first time that dynamic polymer brushes uniquely respond to increasing temperature with increasing brush densities.

Polyrotaxane Brushes Dynamically Formed at a Water/Elastomer Interface

Dense polymer brushes with closely packed rotaxane structures were formed at the interface of water and a styrene-butadiene elastomer by spontaneous segregation of an amphiphilic polyrotaxane (PR), a mechanically interlocked polymer consisting of hydrophobic polybutadiene threading through multiple hydrophilic γ-cyclodextrin (γ-CD) derivatives. Segregation of PR at the water/elastomer interface was suggested by X-ray photoelectron spectroscopy. The polymer brush structure at the water interface was investigated using neutron reflectometry. Brush structures were found to depend on the number of CDs on the PRs; the PR with a small number of CDs formed a thinner and homogeneous brush, whereas the PR with a higher number of CDs formed a thicker and less-ordered brush. These PR-brushes showed protein repulsion, resulting from the surface-hydrated brush layer preventing direct contact of proteins.