A New Family of Thermo-, pH-, and CO2-Responsive Homopolymers of Poly[Oligo(ethylene glycol) (N-dialkylamino) methacrylate]s

Simultaneous switching of two different CO2-switchable amines in the same solution

Most CO2-responsive systems operate by using a base in water that is expected to be mostly deprotonated when under an atmosphere of air and mostly protonated under an atmosphere of CO2. This concept has led to the development of many different CO2-responsive materials such as solvents, polymers, surfactants, and solutes. As CO2-responsive materials research continues, more complex systems may be developed, including systems containing two different bases with different basicities. Understanding the influence each base has on the protonation equilibrium of the other base is important for designing systems in which effective deprotonation and protonation occur. This article presents a model that can predict the solution pH and the % protonation of two different bases at various concentrations under air and CO2. Experimental data was collected to demonstrate the successful simultaneous switching of two amines and to evaluate the accuracy of the predictive model. The simultaneous switching of two different CO2-switchable amines in the same solution was determined to be possible but only if the amine concentrations and basicities are within certain ranges, and only if the pKaH values of the two bases differ by no more than 3 units.

Polyacrylamide-Based Block Copolymer Bearing Pyridine Groups Shows Unexpected Salt-Induced LCST Behavior

Thermal-responsive block copolymers are a special type of macromolecule that exhibit a wide range of applications in various fields. In this contribution, we report a new type of polyacrylamide-based block copolymer bearing pyridine groups of polyethylene glycol-block-poly(N-(2-methylpyridine)-acrylamide; Px) that display distinct salt-induced lower critical solution temperature (LCST) behavior. Unexpectedly, the phase-transition mechanism of the salt-induced LCST behavior of Px block copolymers is different from that of the reported LCST-featured analogues. Moreover, their thermo-responsive behavior can be significantly regulated by several parameters such as salt species and concentration, urea, polymerization degree, polymer concentration and pH values. This unique thermal behavior of pyridine-containing block copolymers provides a new avenue for the fabrication of smart polymer materials with potential applications in biomedicine.

Thermoresponsive Polymers Based on Tertiary Amine Moieties

Thermoresponsive polymers exhibiting unique reversible phase transition properties in aqueous solution in response to temperature stimuli have been extensively investigated. In the past two decades, thermoresponsive polymers based on tertiary amine moieties have achieved considerable progress and become an important family of thermoresponsive polymers, including tertiary amine functionalized poly((meth)acrylamide)s, poly((meth)acrylate)s, poly(styrene)s, poly(vinyl alcohol)s, and poly(ethylene oxide)s, which exhibit lower critical solution temperature and/or upper critical solution temperature in water or aliphatic alcohols. Their phase transition behavior can be modulated by the solution pH and CO₂ due to the protonation of tertiary amine moieties in acidic condition and deprotonation in alkaline condition and the charged ammonium bicarbonate formed by the tertiary amine moieties and CO₂ . The aim of this review is to summarize the recent progress in the thermoresponsive polymers based on tertiary amine moieties.

Stimuli-Responsive Poly(aspartamide) Derivatives and Their Applications as Drug Carriers

Poly(aspartamide) derivatives, one kind of amino acid-based polymers with excellent biocompatibility and biodegradability, meet the key requirements for application in various areas of biomedicine. Poly(aspartamide) derivatives with stimuli-responsiveness can usually respond to external stimuli to change their chemical or physical properties. Using external stimuli such as temperature and pH as switches, these smart poly(aspartamide) derivatives can be used for convenient drug loading and controlled release. Here, we review the synthesis strategies for preparing these stimuli-responsive poly(aspartamide) derivatives and the latest developments in their applications as drug carriers.

Thermo- and oxidation-sensitive poly(meth)acrylates based on alkyl sulfoxides: dual-responsive homopolymers from one functional group

Alkyl sulfoxide side groups introduce thermo- and oxidation-sensitivity into poly(meth)acrylates, thus realizing new dual-responsive homopolymers based on one functional group.

Pickering Interfacial Catalysts with CO2 and Magnetic Dual Response for Fast Recovering in Biphasic Reaction

Pickering interfacial catalysis provides an excellent platform for biphasic reactions, but the separation and recycling of nanocatalysts is a challenge because of high adsorption energy of nanocatalysts at the liquid-liquid interface. In this work, we represent a new type of versatile Pickering emulsion based on magnetic and CO₂-responsive nanohybrids Fe₃O₄@SiO₂@P(TMA-DEA). The smart nanoparticles can stabilize the water-in-oil Pickering emulsion in the biphasic system and achieve the subsequent demulsification by bubbling CO₂ ascribed to their reversible switching surface. In the absence of energy barrier, the nanohybrids can be easily captured in situ by magnetic field in 2 min and showed excellent recyclability. In the Anelli system for alcohol oxidation, the nanocatalyst exhibited threefold enhancement in catalytic efficiency in comparison with an unemulsified two-phase and little loss on activity after five cycles. The conceptually novel dual-responsive system offers a green and energy-saving strategy for effective recycling of the nanocatalyst and intensification of biphasic reaction.

Multi-stimuli responsive poly(amidoamine) dendrimers with peripheral N-dialkylaminoethyl carbamate moieties

A novel type of multi-stimuli responsive dendrimer with thermo-, pH-, and CO₂-responsiveness was developed through facile modification of polyamidoamine dendrimers with various N-dialkylaminoethyl carbamate moieties.

A polyelectrolyte-containing copolymer with a gas-switchable lower critical solution temperature-type phase transition

A polyelectrolyte-containing copolymer with a CO₂/N₂-switchable cloud point, resulting from the gas-induced alternation of hydrophilicity, was prepared.

Recent development of brush polymers via polymerization of poly(ethylene glycol)-based macromonomers

Polymerization of poly(ethylene glycol)-based macromonomers is a facile and versatile synthetic method to generate well-defined brush polymers.

Design of smart polyacrylates showing thermo-, pH-, and CO2-responsive features

A novel acrylate monomer was synthesized by facile sequential two-step reactions and polymerized using RAFT polymerization to yield a well-defined thermo-, pH- and CO₂-responsive homopolymer.

Synthesis and Properties of Alternating Polypeptoids and Polyampholytes as Protein-Resistant Polymers

Alternating polypeptoids are particularly appealing because alternating sequence may impart highly ordered structure and special functions, while their simple synthesis still remains a key challenge. We describe that natural amino acid monomers can be polymerized via Ugi reaction in a step-growth fashion as an AA' BB' system, which leads to alternating polypeptoids with molecular weight up to 15 kg/mol. These alternating polypeptoids are thermally responsive and exhibit cloud points ( T_cp) between 27 and 37 °C. Importantly, the marriage of high functionality of amino acids with Ugi reaction also enables the preparation of polypeptoids encoding both protected amino and carboxyl groups in the side chains with alternating arrangement. The cleavage of the protecting groups leads to alternating polyampholytes without any compositional drift. Such alternating polyampholytes not only exhibit high water solubility (>100 mg/mL) but also demonstrate the ability to resist aggregation with proteins. Moreover, the cell viability measurements reveal that these materials have minimal cytotoxicity to HeLa cells. Overall, this study offers us a simple way to prepare a variety of polypeptoids and polyampholytes as new protein-resistant materials for bioapplications.

Synthesis, self-assembly and drug release behaviors of reduction-labile multi-responsive block miktobrush quaterpolymers with linear and V-shaped grafts

Stimuli-tunable topological/morphological transitions and drug release properties based on novel disulfide-functionalized coil–comb–coil quaterpolymers were revealed.

Steric hindrance effect on the thermo- and photo-responsive properties of pyrene-based polymers

We synthesized a novel series of pyrene-based thermo- and photo-dual responsive polymers named poly(pyren-1-yl-o(m,p)-vinylbenzoate) (P(Py-o(m,p)-VB)). And the influence of the steric hindrance effect on LCST-type phase behaviors and photocleavage properties has been studied.

Controllable fabrication of novel pH-, thermo-, and light-responsive supramolecular dendronized copolymers with dual self-assembly behavior

Novel tri-stimulus responsive supramolecular dendronized copolymers with dual self-assembly behavior are prepared, exhibiting fast and fully reversible phase transitions and trans–cis isomerization.

Facile synthesis of thermo-, pH-, CO2- and oxidation-responsive poly(amido thioether)s with tunable LCST and UCST behaviors

Multi-responsive N-substituted poly(amido thioether) copolymers synthesized by one-pot amine–thiol–acrylate polyaddition could exhibit composition-dependent and stimuli-triggered single or double thermoresponsivity.