Highly Thermally Stable, Transparent, and Flexible Polybenzoxazine Nanocomposites by Combination of Double-Decker-Shaped Polyhedral Silsesquioxanes and Polydimethylsiloxane

Catalyzing Benzoxazine Polymerization with Titanium-Containing POSS to Reduce the Curing Temperature and Improve Thermal Stability

Trisilanolphenyl-polyhedral oligomeric silsesquioxane titanium (Ti-Ph-POSS) was synthesized through the corner-capping reaction, and Ti-Ph-POSS was dispersed in benzoxazine (BZ) to prepare Ti-Ph-POSS/PBZ composite materials. Ti-Ph-POSS could catalyze the ring-opening polymerization (ROP) of BZ and reduce the curing temperature of benzoxazine. In addition, Ti immobilized on the Ti-Ph-POSS cage could form covalent bonds with the N or O atoms on polybenzoxazine, improving the thermal stability of PBZ. The catalytic activity of the Ti-Ph-POSS/BZ mixtures was assessed and identified through ¹H nuclear magnetic resonance (¹H-NMR) and Fourier-transform infrared (FTIR) analyses, while thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA) were used to determine the thermal properties of the composite. It was found that PBZ exhibited a higher glass transition temperature (T_g) and better thermal stability when Ti-Ph-POSS was added. The curing behavior of the Ti-Ph-POSS/BZ mixtures showed that the initial (T_i) and peak (T_p) curing temperatures sharply decreased as the content of Ti-Ph-POSS and the heating rate increased. The curing kinetics of these Ti-Ph-POSS/BZ systems were analyzed using the Kissinger method, and the morphology of Ti-Ph-POSS/PBZ was determined via scanning electron microscopy (SEM). It was found that the Ti-Ph-POSS particles were well distributed in the composites. When the content exceeded 2 wt%, several Ti-Ph-POSS particles could not react with benzoxazine and were only dispersed within the PBZ matrix, resulting in aggregation of the Ti-Ph-POSS molecules.

Construction of novel polybenzoxazine coating precursor exhibiting excellent anti-corrosion performance through monomer design

In this study, we utilized salicylaldehyde (SA) and p-toluidine (Tol-NH₂) to synthesize 2-(Z)[(4-methylphenyl)imino]methylphenol (SA-Tol-SF), which was then reduced to 2-[(4-methylphenyl)amino]methylphenol, producing SA-Tol-NH. SA-Tol-NH was further reacted with formaldehyde to create SA-Tol-BZ monomer. Poly(SA-Tol-BZ) was produced by thermally curing it at 210 °C, after synthesizing it from SA-Tol-BZ. The chemical structure of SA-Tol-BZ was analyzed using various analytical techniques such as FT-IR, ¹H NMR spectroscopy, and ¹³C NMR spectroscopy TGA, SEM, DSC, and X-ray analyses. Afterward, we applied the obtained poly(SA-Tol-BZ) onto mild steel (MS) using thermal curing and spray coating techniques. To examine the anticorrosion attributes of MS coated with poly(SA-Tol-BZ), electrochemical characterization was employed. The study proved that poly(SA-Tol-BZ) coating had a high level of effectiveness in preventing corrosion on MS, with an efficacy of 96.52%, and also exhibited hydrophobic properties.

Synthesis of a Novel Bifunctional Epoxy Double-Decker Silsesquioxane: Improvement of the Thermal Stability and Dielectric Properties of Polybenzoxazine

In this study a new type of bifunctional epoxy compound (DDSQ-EP) based on double-decker silsesquioxane (DDSQ) was synthesized by process of alkaline hydrolysis condensation of phenyltrimethoxysilane and corner capping reaction with dichloromethylvinylsilane, followed by epoxidation reaction of vinyl groups. The resultant structures were confirmed using Fourier transform infrared spectrometry, nuclear magnetic resonance spectrometry and time-of-flight mass spectrometry, respectively. The DDSQ-EP was incorporated into polybenzoxazine to obtain the PBZ/DDSQ-EP nanocomposites. The uniform dispersion of DDSQ-EP in the nanocomposites was verified by X-ray diffraction and scanning electron microscope. The reactions occurred during the curing of the composites and were investigated using infrared spectroscopy of segmented cures. Dynamic mechanical analysis and thermal gravimetric analysis indicated that the storage modulus, glass transition temperature and thermal stability of PBZ/DDSQ-EP were increased in comparison with pure benzoxazine resins. Assessment of dielectric properties demonstrated that the dielectric permittivity and dielectric loss of polybenzoxazine decreased slightly because of the addition of DDSQ-EP.

High Thermal Resistance of Epoxy/Cyanate Ester Hybrids Incorporating an Inorganic Double-Decker-Shaped Polyhedral Silsesquioxane Nanomaterial

In this study, we prepared a difunctionalized cyanate ester double-decker silsesquioxane (DDSQ-OCN) cage with a char yield and thermal decomposition temperature (T_d) which were both much higher than those of a typical bisphenol A dicyanate ester (BADCy, without the DDSQ cage) after thermal polymerization. Here, the inorganic DDSQ nanomaterial improved the thermal behavior through a nano-reinforcement effect. Blending the inorganic DDSQ-OCN cage into the epoxy resin improved its thermal and mechanical stabilities after the ring-opening polymerization of the epoxy units during thermal polymerization. The enhancement in the physical properties arose from the copolymerization of the epoxy and OCN units to form the organic/inorganic covalently bonded network structure, as well as the hydrogen bonding of the OH groups of the epoxy with the SiOSi moieties of the DDSQ units. For example, the epoxy/DDSQ-OCN = 1/1 hybrid, prepared without Cu(II)-acac as a catalyst, exhibited a glass transition temperature, thermal decomposition temperature (T_d), and char yield (166 °C, 427 °C, and 51.0 wt%, respectively) that were significantly higher than those obtained when applying typical organic curing agents in the epoxy resin. The addition of Cu(II)-acac into the epoxy/BADCy and epoxy/DDSQ-OCN hybrids decreased the thermal stability (as characterized by the values of T_d and the char yields) because the crosslinking density and post-hardening also decreased during thermal polymerization; nevertheless, it accelerated the thermal polymerization to a lower curing peak temperature, which is potentially useful for real applications as epoxy molding compounds.

Progress in the self-assembly of organic/inorganic polyhedral oligomeric silsesquioxane (POSS) hybrids

This Review describes recent progress in the self-assembly of organic/inorganic POSS hybrids derived from mono-, di-, and multi-functionalized POSS cages. We highlight the self-assembled structures and physical properties of giant surfactants and chain-end- and side-chain-type hybrids derived from mono-functionalized POSS cages; main-chain-type hybrids derived from di-functionalized POSS cages; and star-shaped hybrids derived from multi-functionalized POSS cages; with various polymeric attachments, including polystyrene, poly(methyl methacrylate), phenolic, PVPh, and polypeptides.

Double-Decker-Shaped Polyhedral Silsesquioxanes Reinforced Epoxy/Bismaleimide Hybrids Featuring High Thermal Stability

In this study, we synthesized bismaleimide into a functionalized double-decker silsesquioxane (DDSQ) cage. This was achieved by hydrosilylation of DDSQ with nadic anhydride (ND), reacting it with excess p-phenylenediamine to obtain DDSQ-ND-NH₂, and treating with maleic anhydride (MA), which finally created a DDSQ-BMI cage structure. We observed that the thermal decomposition temperature (T_d) and char yield were both increased upon increasing the thermal polymerization temperature, and that these two values were both significantly higher than pure BMI without the DDSQ cage structure since the inorganic DDSQ nanoparticle could strongly enhance the thermal stability based on the nano-reinforcement effect. Based on FTIR, TGA, and DMA analyses, it was found that blending epoxy resin with the DDSQ-BMI cage to form epoxy/DDSQ-BMI hybrids could also enhance the thermal and mechanical properties of epoxy resin due to the organic/inorganic network formation created by the ring-opening polymerization of the epoxy group and the addition polymerization of the BMI group due to the combination of the inorganic DDSQ cage structure and hydrogen bonding effect. The epoxy/DDSQ-BMI = 1/1 hybrid system displayed high T_g value (188 °C), T_d value (397 °C), and char yield (40.4 wt%), which was much higher than that of the typical DGEBA type epoxy resin with various organic curing agents.

Preparation and properties of silicon-containing benzoxazine with high thermal stability

A silicon-containing benzoxazine (PDpsp-a) was synthesized from bis( p-hydroxyphenyl)diphenylsilane, aniline, and paraformaldehyde. The structure of the monomer was supported by 1H-NMR and FTIR spectra. The curing behavior of benzoxazine was evaluated by differential scanning calorimetry and in-situ FTIR spectra. The thermal properties were studied by MDSC, TGA, and Py-GC/MS. The results indicated that the characteristic peak of oxazine ring began to disappear when the temperature was heated to 180°C and completely disappeared at 260°C. The polybenzoxazine (PDpsp-a) possessed a high glass transition temperatures (174°C) and had good thermal stability (T10 = 420°C). In the pyrolysates of polybenzoxazine (PDpsp-a), no silicon-containing compounds, no phenol species, and more benzene were detected, we speculated that the Ar-Si bond would fracture with the increase of temperature. The benzene was volatilized from the system as a pyrolysis product and the silicon could react with oxygen to form siloxanes remained in the carbon residue in the form of siloxane compounds. The formed silica layer could endow the silicon-containing polybenzoxazine high thermal degradation stability and high char yield.

Synthesis of a triptycene-containing dioxazine benzoxazine monomer and a main-chain triptycene-polydimethysiloxane-benzoxazine copolymer with excellent comprehensive properties

A novel triptycene-containing dioxazine benzoxazine monomer and a main-chain benzoxazine copolymer have been synthesized and their corresponding thermosets exhibit excellent thermal stability, low flammability and low dielectric constants.

Crystallographic and Spectroscopic Investigations on Oxidative Coordination in the Heteroleptic Mononuclear Complex of Cerium and Benzoxazine Dimer

Among lanthanide-based compounds, cerium compounds exhibit a significant role in a variety of research fields due to their distinct tetravalency, high economic feasibility, and high stability of Ce(IV) complexes. Herein, a systematic investigation of crystallographic information, chemical properties, and mechanistic formation of the novel Ce(IV) complex synthesized from cerium(III) nitrate hexahydrate and 2,2'-(methylazanediyl)bis(methylene)bis(4-methylphenol) (MMD) ligand has been explored. According to the analysis of the crystallographic information, the obtained complex crystal consists of the Ce(IV) center coordinated with two nitrate ligands and two bidentate coordinated (N-protonated and O,O-deprotonated) MMD ligands. The fingerprint plots and the Hirshfeld surface analyses suggest that the C-H⋯O and C-H⋯π interactions significantly contribute to the crystal packing. The C-H⋯O and C-H⋯π contacts link the molecules into infinite molecular chains propagating along the [100] and [010] directions. Synchrotron powder X-ray diffraction (XRD) and X-ray absorption spectroscopy (XAS) techniques have been employed to gain an understanding of the oxidative complexation of Ce(IV)-MMD complex in detail. This finding would provide the possibility to systematically control the synthetic parameters and wisely design the precursor components in order to achieve the desired properties of novel materials for specific applications.

UV-Cured Transparent Silicone Materials with High Tensile Strength Prepared from Hyperbranched Silicon-Containing Polymers and Polyurethane-Acrylates

Flexibility and mechanical performance are essential for transparent silicone materials applied in some optical and electronic devices; however, the tensile strength of transparent silicone materials is fairly low. To overcome this problem, a kind of UV-cured transparent flexible silicone material with quite a high tensile strength and elongation at break was developed through UV-initiated thiol-ene reaction by hyperbranched silicon-containing polymers (HBPs) with a thiol substitute and acrylate-terminated polyurethanes. Unexpectedly, it is found that both the tensile strength and elongation at break of the transparent silicone materials are extraordinarily high, which can reach 3.40 MPa and 270.0%, respectively. The UV-cured materials have good UV resistance ability because their transmittance is still as high as 93.4% (800 nm) even when aged for 40 min in a UV chamber of 10.6 mW cm-2. They exhibit outstanding adhesion to substrates, and the adhesion to a glass slide, wood, and a tin plate is grade 1. The promising results encourage us to further improve the mechanical performance of flexible transparent silicone materials by effective chemical modification strategies with HBPs. An attempt was made to apply the UV-cured materials in a Gel-Pak box and it could be proved that the UV-cured materials may be one of the good candidates for use as packaging or protecting materials of optical or electronics devices such as the Gel-Pak product.

Organocatalytic controlled/living ring-opening polymerization of 1,3,5-triphenyl-1,3,5-tri-p-tolylcyclotrisiloxane for the precise synthesis of fusible, soluble, functionalized, and solid poly[phenyl(p-tolyl)siloxane]s

An organocatalytic controlled/living ring-opening polymerization (ROP) of 1,3,5-triphenyl-1,3,5-tri(p-tolyl)cyclotrisiloxane (PT3) produced linear poly[phenyl(p-tolyl)siloxane] (PPTS) with controlled structures.

Polyester-Polysiloxane Hyperbranched Block Polymers for Transparent Flexible Materials

Highly transparent flexible silicone elastomers are useful for certain stretchable electronics and various types of smart devices. Polyester-polysiloxane hyperbranched block copolymers are synthesized by ring-opening polymerization of octamethylcyclotetrasiloxane initiated by macromolecular lithium alkoxide. Treatment of these copolymers with tetraethoxysilane and dibutylin dilaurate at room temperature gives the corresponding transparent elastic materials. The transparency of the materials can reach 90% (700-800 nm), and the starting thermal decomposition temperatures of the materials are higher than 330 °C. Very interestingly, though the highest tensile strength of the material prepared is about 0.48 MPa, the elongation at break can reach 778-815%. The results will inspire us to develop highly transparent flexible silicone materials by designing copolymers of silicone materials and hyperbranched polymers.

Characteristics of Thermosetting Polymer Nanocomposites: Siloxane-Imide-Containing Benzoxazine with Silsesquioxane Epoxy Resins

A series of innovative thermosetting polymer nanocomposites comprising of polysiloxane-imide-containing benzoxazine (PSiBZ) as the matrix and double-decker silsesquioxane (DDSQ) epoxy or polyhedral oligomeric silsesquioxane (POSS) epoxy were prepared for improving thermosetting performance. Thermomechanical and dynamic mechanical characterizations indicated that both DDSQ and POSS could effectively lower the coefficient of thermal expansion by up to approximately 34% and considerably increase the storage modulus (up to 183%). Therefore, DDSQ and POSS are promising materials for low-stress encapsulation for electronic packaging applications.

Polysiloxanes Grafted with Mono(alkenyl)Silsesquioxanes-Particular Concept for Their Connection

Herein, a facile and efficient synthetic route to unique hybrid materials containing polysiloxanes and mono(alkyl)silsesquioxanes as their pendant modifiers (T₈@PS) was demonstrated. The idea of this work was to apply the hydrosilylation reaction as a tool for the efficient and selective attachment of mono(alkenyl)substituted silsesquioxanes (differing in the alkenyl chain length, from -vinyl to -dec-9-enyl and types of inert groups iBu, Ph at the inorganic core) onto two polysiloxanes containing various amount of Si-H units. The synthetic protocol, determined and confirmed by FT-IR in situ and NMR analyses, was optimized to ensure complete Si-H consumption along with the avoidance of side-products. A series of 20 new compounds with high yields and complete β-addition selectivity was obtained and characterized by spectroscopic methods.

Highly Thermal Stable Phenolic Resin Based on Double-Decker-Shaped POSS Nanocomposites for Supercapacitors

In this study we incorporated various amounts of a double-decker silsesquioxane (DDSQ) into phenolic/DDSQ hybrids, which we prepared from a bifunctionalized phenolic DDSQ derivative (DDSQ-4OH), phenol, and CH₂O under basic conditions (with DDSQ-4OH itself prepared through hydrosilylation of nadic anhydride with DDSQ and subsequent reaction with 4-aminophenol). We characterized these phenolic/DDSQ hybrids using Fourier transform infrared spectroscopy; ¹H, ¹³C, and ²⁹Si nuclear magnetic resonance spectroscopy; X-ray photoelectron spectroscopy (XPS); and thermogravimetric analysis. The thermal decomposition temperature and char yield both increased significantly upon increasing the DDSQ content, with the DDSQ units providing an inorganic protection layer on the phenolic surface, as confirmed through XPS analyses. We obtained carbon/DDSQ hybrids from the phenolic/DDSQ hybrids after thermal curing and calcination at 900 °C; these carbon/DDSQ hybrids displayed electrochemical properties superior to those of previously reported counterparts.

Synthesis and thermal properties of phenol- and amine-capped main-chain benzoxazine oligomers with multiple methyl substitutions

A series of main-chain benzoxazine oligomers with different methyl substitutions are successfully synthesized. Chemical structures are analyzed by Fourier transform infrared spectroscopy, proton nuclear magnetic resonance spectroscopy, and gel permeation chromatography. Effects of methyl substitutions on chemical shifts of protons in oxazine ring and thermal properties, including glass transition temperature, thermal stability, and char yield, are discussed. The influences of methyl substitutions on different positions are demonstrated: (i) substitution on phenols induces obvious increase in curing temperature while substitution on amine does not show apparent impact; (ii) substitution at different positions results in T g variation, following the sequence of none-substitution > substitution at end-capping > substitution on diamines in main-chain > substitution on bisphenols in main-chain; and (iii) substitution at end-capping would cause apparent deterioration in thermal stability while substitution on diamines in main-chain would benefit thermal stability and char yield. Experimental results and related explanations are provided in detail.

Preparation of benzoxazine-modified halloysite nanotubes and its application on epoxy/benzoxazine composites

Benzoxazine monomer (named as B-aptes) was synthesized from 3-aminopropyltriethoxysilane (KH-550), bisphenol A (BPA), and paraformaldehyde. Subsequently, functionalized halloysite nanotubes were obtained by introducing B-aptes onto the surface of halloysite nanotubes (HNTs). Then, benzoxazine-modified halloysite nanotubes (B-HNTs) were used to combine with BPA epoxy resin to prepare the diglycidyl ether of bisphenol-A (DGEBA)/B-HNTs composites. The homogeneous dispersion state of modified HNTs in the cured composite matrix was observed by scanning electron microscopy. Differential scanning calorimetry was used to investigate polymerization behaviors of ternary composites. The results showed that the ternary composite possessed lower polymerization temperature compared with the neat DGEBA/benzoxazine. According to the results of thermogravimetric analysis, the thermal stability of DGEBA/benzoxazine copolymers was improved by the modified HNTs, the char yield increased with the increase of HNTs mass ratio. The results of mechanical tests and dynamic mechanical analysis displayed that the DGEBA/B-HNTs composites possessed promoted mechanical properties.

UV-Cured Transparent Flexible Silicone Materials with High Tensile Strength

Transparent flexible silicone materials are useful in electronics, sensors, coatings, and so forth. However, to the best of our knowledge, the tensile strength of unreinforced silicone rubber is lower than 0.4 MPa, and the highest tensile strength of highly transparent silicone-modified materials is no more than 1.5 MPa. The poor mechanical property limits their further application in electronic devices. Here, a kind of UV-cured transparent flexible silicone materials with tensile strength as high as 2.2 MPa were prepared by a UV-initiated thiol-ene reaction of a sulfur-containing hyperbranched polycarbosilane and a thiol silicone resin. Interestingly, their tensile strength can increase from 2.2 to 5.6 and 5.7 MPa after being immersed in an aqueous solution of 10 wt % hydrochloric acid and 10 wt % NaCl for 7 days, respectively. It is argued that the increase of the tensile strength of cured films may be attributed to the -SiOCH3 of the residual 3-trimethoxysilylpropanethiol in the sulfur-containing hyperbranched polycarbosilane. The performances of the cured materials were investigated in detail. These silicone materials exhibit transparency higher than 95% (wavenumber in the range of 400-800 nm), and the initial thermal decomposition temperatures of the cured materials are about 340 °C. These materials also show good anticorrosion property, and the mass loss of the materials immersed in the aqueous solution mediums is no more than 0.39 wt % even for 15 days.

Main Chain-Type Block Copolymers through Atom Transfer Radical Polymerization from Double-Decker-Shaped Polyhedral Oligomeric Silsesquioxane Hybrids

In this study, we synthesized two main chain-type block copolymers featuring hydrogen bond donor and acceptor segments through atom transfer radical polymerization (ATRP) using a bifunctionalized polyhedral oligomeric silsesquioxane (POSS) nanoparticle as the initiator. Hydrosilylation of vinylbenzyl chloride at the two corners of a double-decker silsesquioxane (DDSQ) provided the bifunctionalized benzyl chloride initiator VBC-DDSQ-VBC, which we applied as a platform to prepare a main chain-type polystyrene homopolymer (PS-DDSQ-PS), the diblock copolymer poly(styrene-b-4-vinylpyridine) (P4VP-b-PS-DDSQ-PS-b-P4VP), and the diblock copolymer poly(styrene-b-tert-butoxystyrene) (PtBuOS-b-PS-DDSQ-PS-b-PtBuOS) through sequential ATRP. Selective hydrolysis of the tert-butoxyl units of PtBuOS-b-PS-DDSQ-PS-b-PtBuOS yielded the strongly hydrogen bonding diblock copolymer poly (styrene-b-vinylphenol) (PVPh-b-PS-DDSQ-PS-b-PVPh). We used Fourier transfer infrared spectroscopy, nuclear magnetic resonance spectroscopy, size exclusion chromatography, differential scanning calorimetry, mass-analyzed laser desorption ionization mass spectrometry, and transmission electron microscopy to investigate the chemical structures, thermal behavior, and self-assembled nanostructures formed by these main chain-type block copolymers based on DDSQ.

Progress in the Synthesis of Bifunctionalized Polyhedral Oligomeric Silsesquioxane

Polyhedral oligomeric silsesquioxane (POSS) has been considered as one of the most promising nanofillers in academic and industrial research due to its unique multifunctional nanostructure, easy functionalization, hybrid nature, and high processability. The progress of POSS has been extensive, particularly applications based on single- or multiple-armed POSS. In polymer hybrids, in order to enhance the properties, bifunctional POSS has been incorporated into the backbone chain of the polymer. This review summarizes recent developments in the synthesis, modification, and application of bifunctional POSS-containing composite materials. This includes amino-POSS, hydroxyl-POSS, aromatic ring-POSS, ether-POSS, and vinyl groups-POSS and their applications, exemplified by polyurethanes (PUs) and polyimides (PIs). In addition, the review highlights the enhancement of thermal, mechanical, and optical properties of the composites.

Using Methacryl-Polyhedral Oligomeric Silsesquioxane as the Thermal Stabilizer and Plasticizer in Poly(vinyl chloride) Nanocomposites

In this study, we investigated the influence of methacryl-functionalized polyhedral oligomeric silsesquioxane (MA-POSS) nanoparticles as a plasticizer and thermal stabilizer for a poly(vinyl chloride) (PVC) homopolymer and for a poly(vinyl chloride)/dissononyl cyclohexane-1,2-dicarboxylate (PVC/DINCH) binary blend system. The PVC and the PVC/DINCH blend both became flexible, with decreases in their glass transition temperatures and increases in their thermal decomposition temperatures, upon an increase in MA-POSS content, the result of hydrogen bonding between the C=O groups of MA-POSS and the H-CCl units of the PVC, as determined using infrared spectroscopy. Furthermore, the first thermal decomposition temperature of the pure PVC, due to the emission of HCl, increased from 290 to 306 °C, that is, the MA-POSS nanoparticles had a retarding effect on the decomposition of the PVC matrix. In tensile tests, all the PVC/DINCH/MA-POSS ternary blends were transparent and displayed flexibility, but their modulus and tensile strength both decreased, while their elongation properties increased, upon an increase in MA-POSS concentration, both before and after thermal annealing. In contrast, the elongation decreased, but the modulus and tensile strength increased, after thermal annealing at 100 °C for 7 days.

Curing kinetics of phenolphthalein based polyphosphazene towards thermal stability and flame retardancy of polybenzoxazine

Phenolphthalein type polyphosphazene (PZPT) microspheres were synthesized by an ultrasound assisted precipitation polymerization method, and their structures were confirmed by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. Benzoxazine/PZPT (Ba/PZPT) hybrid materials were fabricated and cured to prepare polybenzoxazine/PZPT (PBa/PZPT) composites. The effects of PZPT microspheres on the curing kinetics and behaviors of Ba were systematically analyzed and supported by differential scanning calorimetry (DSC) and in situ FTIR. The thermogravimetric (TGA) results demonstrated good thermal stability of the PBa composites incorporating PZPT. The peak of heat release rate and total heat release values of PBa/PZPT-5% composites obviously deceased by 57.8% and 17.3% compared to those of the pristine PBa. Moreover, the smoke released from the PZPT/PBa system significantly reduced with the loading of microspheres. Finally, the dynamical mechanical analysis results demonstrated that the T g of PBa flame retardant composites was approximately 210 °C, not affecting further applications of PBa composites.

Outstanding dielectric and thermal properties of main chain-type poly(benzoxazine-co-imide-co-siloxane)-based cross-linked networks

A high performance cross-linked polymer with a very low dielectric constant was achieved via a newly designed main-chain type poly(benzoxazine-co-imide-co-siloxane).

Benzocyclobutene-functional double-decker silsesquioxane: self-assembled hybrid resin for high-performance dielectrics and LED encapsulants

The optoelectronic industry is focused on developing new electronic packaging materials to improve the performance of optoelectronic devices.

One-pot strategy for synthesis of open-cage silsesquioxane monomers

A novel synthetic strategy to access POSS monomers has been proposed; one reaction site of an open-cage POSS was capped, and the remaining two silanol groups were functionalized for polymerization. Importantly, the monomer can be obtained by one-pot synthesis without any troublesome isolation process.

Functional Polyimide/Polyhedral Oligomeric Silsesquioxane Nanocomposites

The preparation of hybrid nanocomposite materials derived from polyhedral oligomeric silsesquioxane (POSS) nanoparticles and polyimide (PI) has recently attracted much attention from both academia and industry, because such materials can display low water absorption, high thermal stability, good mechanical characteristics, low dielectric constant, flame retardance, chemical resistance, thermo-redox stability, surface hydrophobicity, and excellent electrical properties. Herein, we discussed the various methods that have been used to insert POSS nanoparticles into PI matrices, through covalent chemical bonding and physical blending, as well as the influence of the POSS units on the physical properties of the PIs.