Static Memory of Enantiomeric Helices Induced in a Poly(biphenylylacetylene) by a Single Enantiomer Assisted by Temperature- and Solvent-Driven Helix Inversion

Optically active poly(diphenylacetylene)s showing solvent-dependent helix inversion accompanied by modulation of helix inversion barriers

Symmetrically substituted poly(diphenylacetylene)s bearing optically active 2-octyloxycarbonyl groups at the para-positions of the pendant phenyl rings not only show a unique solvent-dependent helix inversion to afford diastereomeric right- and left-handed helical polymers but also significant unprecedented solvent-dependent changes in the helix inversion barrier of the polymer backbone resulting in switching between static or dynamic behavior of the helical polymers at approximately room temperature depending on the solvents used.

Chromaticity sensor for discriminatory identification of aliphatic and aromatic primary amines based on conformational changes of polyacetylene

The design and construction of suitable sensors that can selectively recognize chemically similar substances such as aliphatic and aromatic amines remain challenging. In this work, we reported a poly(phenylacetylene) bearing two aldehyde pendants as the color indicator for discriminative identification of amines. Reversible Schiff-base reaction of the aldehyde group with the amine resulted in a conformational transition of the polyacetylene backbone from cis-cisoid to cis-transoid, which further achieved a colorimetric change. Thirteen aliphatic amines and aromatic amines had been studied. Compared with aromatic amines, aliphatic amines generally caused the polyene backbone to display perceivable colorimetric change. Steric and electronic effect played a significant role in the colorimetric response. In addition, external environment, including amine content, polymer concentration, and temperature, had influence on the sensitivity of this colorimetric indicator system. The amines-induced colorimetric variation was further demonstrated by the CIELAB color space. Moreover, the colorimetric sensor exhibited excellent reversibility and recyclability.

Stimuli-responsive synthetic helical polymers

Synthetic dynamic helical polymers (supramolecular and covalent) and foldamers share the helix as a structural motif. Although the materials are different, these systems also share many structural properties, such as helix induction or conformational communication mechanisms. The introduction of stimuli responsive building blocks or monomer repeating units in these materials triggers conformational or structural changes, due to the presence/absence of the external stimulus, which are transmitted to the helix resulting in different effects, such as assymetry amplification, helix inversion or even changes in the helical scaffold (elongation, J/H helical aggregates). In this review, we show through selected examples how different stimuli (e.g., temperature, solvents, cations, anions, redox, chiral additives, pH or light) can alter the helical structures of dynamic helical polymers (covalent and supramolecular) and foldamers acting on the conformational composition or molecular structure of their components, which is also transmitted to the macromolecular helical structure.

Ultra-fast One-Handed Helix Induction and Its Static Helicity Memory in a Poly(biphenylylacetylene) with a Catalytic Amount of Chiral Ammonium Salts

We report an ultra-fast helix induction and subsequent static helicity memory in poly(biphenylylacetylene) (PBPA-A) assisted by a catalytic amount of nonracemic ammonium salts comprised of non-coordinating tetrakis[3,5-bis(trifluoromethyl)phenyl]borate (BArF^- ) as a counter anion. The remarkable acceleration of the helix-induction rate in PBPA-A accompanied by the significant amplification of the asymmetry relies on the two methoxymethoxy groups of the biphenyl pendants, which can gain access to enfold the chiral ammoniums in a crown-ether manner in specific aromatic solvents, leading to ultra-fast helicity induction, which is completed within 30 s. In aromatic solvents, helicity memory is lost rapidly, but is quite stable in long-chain hydrocarbons. The best use of specific solvents for helicity induction and static helicity memory, respectively, provides a highly sensitive chirality sensing system toward a small amount of chiral amines and amino acids when complexed with BArF^- .

Recent advances in helical polyacetylene derivatives used as coated chiral stationary phases for enantioseparation

The development of helical polyacetylene derivatives bearing different kinds of chiral pendants and the enantioseparation based on these helical polymers as coated CSPs for HPLC will be described.

Recent progress in the development of chiral stationary phases for high-performance liquid chromatography

Separations and analyses of chiral compounds are important in many fields, including pharmaceutical production, preparation of chemical intermediates, and biochemistry. High-performance liquid chromatography using a chiral stationary phase is regarded as one of the most valuable methods for enantiomeric separation and analysis because it is highly efficient, is broadly applicable, and has powerful separation capability. The focus for development of this method is the identification of novel chiral stationary phases with superior recognition performance and good stability. The present article reviews recent progress in the development of new chiral stationary phases for high-performance liquid chromatography between January 2018 and June 2021. These newly reported chiral stationary phases are divided into three categories: small organic molecule-based (cyclodextrin and its derivatives, macrocyclic antibiotics, cinchona alkaloids, and other low molecular weight chiral molecules), macromolecule-based (cellulose and amylose derivatives, chitin and chitosan derivatives, and synthetic helical polymers) and chiral porous material-based (chiral metal-organic frameworks, chiral covalent organic frameworks, and chiral inorganic mesoporous silicas). Each type of chiral stationary phase is discussed in detail.

Valine derived poly (acetylenes) as versatile chiral lyotropic liquid crystalline alignment media for RDC-based structure elucidations

Anisotropic samples of lyotropic liquid crystalline (LLC) phases of valine derived polyaryl acetylenes were employed as chiral alignment media for the measurement of residual dipolar couplings (RDCs) of 12 small, chiral, organic molecules. The quadrupolar splitting of the deuterium signal of CDCl₃ can be adjusted by temperature and concentration changes from 0 to 350 Hz. The LLC phases showed excellent orienting properties for all analytes bearing various functional groups. The precise extraction of RDCs in the range of up to ±30 Hz from F2-coupled HSQC spectra was possible. Additionally, the chiral environment led to diastereomorphous interactions with the enantiomers of chiral analytes leading to two different sets of RDCs. This differential order effect was particularly pronounced with H-bond donors like alcohols and 2° amines.

Solvent polarity driven helicity inversion and circularly polarized luminescence in chiral aggregation induced emission fluorophores

Development of functional materials capable of exhibiting chirality tunable circularly polarized luminescence (CPL) is currently in high demand for potential technological applications. Herein we demonstrate the formation of both left- and right-handed fluorescent helical superstructures from each enantiomer of a chiral tetraphenylethylene derivative through judicious choice of the solution processing conditions. Interestingly, both the aggregation induced emission active enantiomers exhibit handedness inversion of their supramolecular helical assemblies just by varying the solution polarity without any change in their molecular chirality. The resulting helical supramolecular aggregates from each enantiomer are capable of emitting circularly polarized light, thus enabling both right- and left-handed CPL from a single chiral material. The left- and right-handed supramolecular helical aggregates in the dried films have been characterized using spectroscopy, scanning electron microscopy, and transmission electron microscopy techniques. These new chiral aggregation induced emission compounds could find applications in devices where CPL of opposite handedness is required from the same material and would facilitate our understanding of the formation of helical assemblies with switchable supramolecular chirality.

Chiral helical polymer materials derived from achiral monomers and their chiral applications

Helix-sense-selective polymerization (HSSP) of achiral monomers and chiral post-induction of racemic helical polymers provide two alternative approaches for constructing chiral helical polymer materials.

Ambidextrous Chirality Transfer Capability from Cellulose Tris(phenylcarbamate) to Nonhelical Chainlike Luminophores: Achiral Solvent-Driven Helix-Helix Transition of Oligo- and Polyfluorenes Revealed by Sign Inversion of Circularly Polarized Luminescence and Circular Dichroism Spectra

We investigated whether helicity and/or chirality of cellulose tris(phenylcarbamate) (CTPC) can transfer to noncharged, nonhelical oligo- and polyfluorenes when CTPC was employed as a solution processable homochiral platform of a D-glucose-skeletal polymer. Noticeably, CTPC revealed the solvent-driven, ambidextrous intermolecular helicity/chirality transfer capability to these fluorenes. The chiroptical inversion characteristics of circularly polarized luminescence (CPL) and the corresponding CD spectra were realized by solely choosing a proper achiral solvent and/or achiral cosolvent. When the solution of PF6 and CTPC in tetrahydrofuran (THF) was cast on a quartz substrate, the dissymmetry ratio of CPL (g_CPL) from the polymer film showed g_CPL = +2.1 × 10^-3 at 429 nm. Conversely, when dichloromethane (DCM) was used as the solvent, the CPL sign was inverted to g_CPL = -2.4 × 10^-3 at 429 nm. The dissymmetry ratio of Cotton CD band (g_CD) from the THF solution was g_CD = +3.2 × 10^-3 at 392 nm; conversely, from the DCM, the CD sign inverted to g_CD = -0.8 × 10^-3 at 371 nm. The sign and magnitude of the g_CD values were interpreted to a London dispersion term (δ_d) of Hansen solubility parameter (δ) of the casting solvents rather than a dipole-dipole interaction term (δ_p) and a hydrogen bonding interaction term (δ_h) of the δ values and dielectric constant (ε). Analysis of solvent-driven changes in FTIR spectra, wide-angle X-ray diffraction profiles, and differential scanning calorimetry diagrams indicated that solvent driven on-off switching of multiple hydrogen bonds due to three urethane groups of CTPC play the key for the inversion. Intermolecular CH/π and π-π interactions among phenyl rings and alkyl groups were assumed to be crucial for helicity/chirality transfer capability based on molecular mechanics and molecular dynamics simulations of PF6-CTPC hybrids. These chiroptical inversion characteristics arose from solvent-driven order-disorder transition characteristics of the CTPC helix rather than a helix-helix transition of CTPC itself.